Command Reference Guide
320 ● x25 call-facility 3Com Router 5000 Family and Router 6000 Family
Command Reference
Default By default, no facility is set.
Example Specify the flow control parameter negotiation with the peer end for the calls from
the X.25 interface serial0/0/0.
[3Com-Serial0/0/0] x25 call-facility packet-size 512 512
[3Com-Serial0/0/0] x25 call-facility window-size 5 5
View This command can be used in the following views:
■ Interface view
Description The user facilities set via this command are available for all the calls originating from
this X.25 interface. You can set a user option for an X.25 call from a certain address
mapping through the command
x25 map protocol-name protocol-address
x.121-address x.121-address [ option ].
Related Command x25 map