Command Reference Guide

3Com Router 5000 Family and Router 6000 Family service cbr ● 303
Command Reference
This command is used to set the PVC service type and parameter. The newly specified
PVC service type will replace the existing service type. It is recommended that the PVC
with larger bandwidth be created first and then the one with smaller bandwidth. If
the creation fails, the
cdvt_value can be adjusted larger to create the PVC once
more. The above case will be prompted in the command line, as follows:
“fail to set service parameter, please adjust cdvt value”
The command does not support ATM E1 interface and ATM E3 interface.
Related Commands ■ service vbr-nrt
■ service vbr-rt
■ service ubr