Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset pppoe-server ● 297
Command Reference
reset pppoe-server
Purpose Use the reset pppoe-server command to clear PPPoE sessions at the server end.
Syntax reset pppoe-server { all | virtual-template number | interface
interface-type interface-num }
Parameters all
Clears all PPPoE sessions.
virtual-template number
Specifies a virtual template by its number.
interface interface-type
interface-num
Specifies an interface by its type and number.
Example Clear the sessions on virtual template 1.
<Router> reset pppoe-server virtual-template 1
View This command can be used in the following views:
■ User view