Command Reference Guide

296 ● reset pppoe-client 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset pppoe-client
Purpose Use the reset pppoe-client command to terminate PPPoE session and
re-initiate the connection later.
Syntax reset pppoe-client { all | dial-bundle-number number }
Parameters all
Clears all PPPoE sessions.
dial-bundle-number number
Dialer Bundle number, which is used to clear the PPPoE
session corresponding to Dialer Bundle. Valid values
are 1 to 255..
Example Clear all PPPoE sessions, and re-initiate PPPoE session later.
<3Com> reset pppoe-client all
View This command can be used in the following views:
■ User view
Description If PPPoE session in permanent online mode is terminated using the command reset
pppoe-client
, the Router will automatically re-establish PPPoE session in sixteen
seconds. If PPPoE session is terminated in packet trigger mode using the command
reset pppoe-client, the Router will not re-establish PPPoE session unless it has
data to transmit.
Related Command pppoe-client