Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset bridge address-table ● 289
Command Reference
reset bridge address-table
Purpose Use the reset bridge command to clear all the dynamic address entries or the
entries of a specified bridge set or a specified interface in the forwarding table.
Syntax reset bridge address-table [ bridge-set bridge-set | interface
interface-type interface-number ]
Parameters bridge-set
Bridge set number. Valid values are an integer from 1
to 255.
interface-type
Interface type.
interface-number
Interface number.
Example Clear all the dynamic address entries pf bridge set 1 in the forwarding table.
<3Com> reset bridge address-table bridge-set 1
View This command can be used in the following views:
■ User view