Command Reference Guide

3Com Router 5000 Family and Router 6000 Family pvc max-number ● 283
Command Reference
pvc max-number
Purpose Use the pvc max-number command to set the maximum number of ATM interface
virtual circuits (VC).
Use the undo pvc max-number command to restore the default value.
Syntax pvc max-number max-number
undo pvc max-number
Parameters max-number
Maximum number of supported VCs. The value range
and default value for this parameter depends on
interface type, as shown in the following table:
Example Configure ATM interface Atm 1/0/0 to support up to 1024 VCs.
[3Com-Atm1/0/0] pvc max-number 1024
Configure ATM interface Atm 1/0/0 to support the default maximum number of VCs
(1024).
[3Com-Atm1/0/0] undo pvc max-number
View This command can be used in the following views:
■ ATM Master Interface view
Description Use the pvc max-number command to set the maximum number of ATM interface
virtual circuits (VC).
Use the undo pvc max-number command to restore the default value.
Table 1 The maximum number of VCs allowed for each type of ATM interface
Interface type
Value range for
max-number
Default
ADSL 1 to 32 32
GSHDSL 1 to 32 32
ATMOC3 1 to 1024 1024
ATM25 1 to 256 256
ATME3 1 to 1024 1024
ATMT3 1 to 1024 1024