Command Reference Guide

3Com Router 5000 Family and Router 6000 Family pvc ● 281
Command Reference
View This command can be used in the following views:
■ ATM Interface view
■ PVC-Group view
Description Use the pvc command to create a PVC or enter the PVC view at ATM interface or in
PVC-Group view.
Use the undo pvc command to delete the specified PVC.
This command is used to create a PVC with specified VPI/VCI.
Once pvc-name is specified for one PVC (e.g. "3Com"), it is possible to re-enter the
PVC view by inputting pvc
pvc-name (e.g. " pvc 3Com"). The deletion of the PVC
can be done by inputting
undo pvc pvc-name (e.g. " undo pvc 3Com") or
through the
undo pvc vpi/vci (if the VPI/VCI of this PVC is 1/32, it is " undo pvc
1/32") command.
The VPI/VCI pair of each PVC is unique at an ATM interface (including main interface
and sub-interface).
The actual number of PVCs that can be created is determined by the pvc
max-number
command.
Related Commands ■ display atm pvc-info
■ pvc max-number