Command Reference Guide

280 ● pvc 3Com Router 5000 Family and Router 6000 Family
Command Reference
pvc
Purpose Use the pvc command to create a PVC or enter the PVC view at ATM interface or in
PVC-Group view.
Use the undo pvc command to delete the specified PVC.
Syntax pvc { pvc-name [ vpi/vci ] | vpi/vci }
undo pvc { pvc-name [ vpi/vci ] | vpi/vci }
Parameters pvc-name
PVC name, whose maximum length is 16 characters. It
shall be unique at ATM interface (case insensitive), and
can not be a legal VPI/VCI pair. For example, "1/20"
cannot be a PVC name.
vpi/vci
vpi is ATM Virtual Path Identifier (VPI) in the range 0 to
255; vci is ATM Virtual Channel Identifier (VCI). Its
value range depends on interface type. See the
following table for reference. Usually, the vci values
from 0 to 31 are reserved for special usage and cannot
be used.
Note:
■ vpi and vci cannot both be 0.
■ A PVC in certain PVC-Group cannot be deleted at ATM interface.
Default By default, no PVC is created.
Example Display how to create a PVC named "3Com" with VPI/VCI as 1/101.
[3Com-Atm1/0/0] pvc 3Com 1/101
Table 1 VCI range for each type of ATM interface
Interface type VCI
ADSL <0-255>
GSHDSL <0-255>
ATMOC3 <0-1023>
ATM25 <0-511>
ATME3 <0-1023>
ATMT3 <0-1023>
IMA-E1/T1 <0-511>