Command Reference Guide

3Com Router 5000 Family and Router 6000 Family pppoe-server bind virtual-template ● 275

Command Reference

pppoe-server bind virtual-template

Purpose Use the pppoe-server bind virtual-template command to enable PPPoE

on the virtual-template specified by the Ethernet interface.

Use the undo pppoe-server bind command to disable PPPoE protocol on the

relevant interface.

Syntax pppoe-server bind virtual-template number

undo pppoe-server bind

Parameters number

Number of the virtual-template for access to PPPoE.

Valid values are 0 to 1023.

Default By default, PPPoE protocol is disabled.

Example Enable PPPoE on virtual-template 1 of Ethernet interface Ethernet1/0/0.

[3Com-Ethernet1/0/0] pppoe-server bind virtual-template 1

View This command can be used in the following views:

■ Interface view