Command Reference Guide

66 ● debugging snmp-agent 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging snmp-agent
Purpose Use the debugging snmp-agent command to enable SNMP agent debugging
and specify the information to be output.
Use the undo debugging snmp-agent command to disable SNMP agent
debugging.
Syntax debugging snmp-agent { header | packet | process | trap }
undo debugging snmp-agent { header | packet | process | trap }
Parameters header
Enables header debugging.
packet
Enables packet debugging.
process
Enables process debugging.
trap
Enables trap debugging.
Default By default, SNMP agent debugging is disabled.
Example Enable header debugging of the SNMP agent.
<3Com> debugging snmp-agent header
View This command can be used in the following views:
■ User view