Command Reference Guide
272 ● ppp timer negotiate 3Com Router 5000 Family and Router 6000 Family
Command Reference
ppp timer negotiate
Purpose Use the ppp timer negotiate command to set the PPP negotiation timeout.
Use the undo ppp timer negotiate command to restore the default value.
Syntax ppp timer negotiate seconds
undo ppp timer negotiate
Parameters seconds
Time of negotiation timeout (in seconds). During the
PPP negotiation, if the local end does not receive the
response packet of the peer end, PPP will resend the
last packet. Valid values are 1 to 10 seconds.
If no value is specified, the default is 3 seconds.
Example Set the PPP negotiation timeout to 5 seconds.
[3Com-Serial1/0/0] ppp timer negotiate 5
View This command can be used in the following views:
■ Interface view
Related Command link-protocol ppp