Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp pap local-user ● 271
Command Reference
ppp pap local-user
Purpose Use the ppp pap local-user command to configure the username and password
sent by the local router when it is authenticated by the peer router via the PAP
method.
Use the undo ppp pap local-user command to disable the configuration.
Syntax ppp pap local-user username password { simple | cipher } password
undo ppp pap local-user
Parameters username
Username sent, consisting of a string from 1 to 80
characters.
password
Password sent.
simple
Indicates to display the password in plain text.
cipher
Indicates to display the password in ciphertext.
Default By default, when the local router is authenticated by the peer router via the PAP
method, both the username and the password sent by the local router are empty.
Example Set the username of the local router authenticated by the peer end via the PAP
method as 3Com and the password as 3Com.
[3Com-Serial1/0/0] ppp pap local-user 3Com password simple 3Com
View This command can be used in the following views:
■ Interface view
Description When the local router is authenticated via the PAP method by the peer router, the
username and password sent by the local router must be the same as the user
and
password of the peer router.
Related Commands ■ ppp authentication-mode
■ local-user