Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp user ● 269
Command Reference
ppp mp user
Purpose Use the ppp mp user command to bind an MP user to a virtual template.
Use the undo ppp mp user command to remove the specified binding.
Syntax ppp mp user username bind virtual-template number
undo ppp mp user username
Parameters username
User name, consisting of a string from 1 to 80
characters long.
number
Virtual-template number.
Example Specify the corresponding virtual-template as 1 for the username 3Com, and
configure the IP address of the virtual-template as 202.38.60.1.
[3Com] ppp mp user 3Com bind virtual-template 1
[3Com] interface virtual-template 1
[3Com-virtual-template1] ip address 202.38.60.1 255.255.255.0
View This command can be used in the following views:
■ System view
Description During the establishment of a PPP connection, after PPP authentication succeeds, if a
virtual-template is specified, MP will be bound on the basis of parameters of the
virtual-template and a new virtual interface will be formed to transfer data.
Operating parameters that could be configured on the virtual-template include:
■ Local IP address and the IP address (or IP address pool) assigned to the peer PPP
■ PPP working parameter
Related Commands ■ ppp mp
■ ppp mp max-bind