Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp mp-group ● 267
Command Reference
ppp mp mp-group
Purpose Use the ppp mp mp-group command to add the current interface to the specified
MP-group.
Use the undo ppp mp mp-group command to remove the current interface from
the specified MP-group.
Syntax ppp mp mp-group number
undo ppp mp mp-group number
Parameters number
MP-group interface number.
Example Add serial interface 3/0/0 to MP-group 3.
[3Com] interface serial 3/0/0
[3Com-Serial3/0/0] ppp mp mp-group 3
Remove serial interface 3/0/0 from MP-group 3.
[3Com-Serial3/0/0] undo ppp mp mp-group 3
View This command can be used in the following views:
■ Interface view
Description Use this command in conjunction with the interface mp-group command to
create an MP-group interface and add an interface to the MP-group. These two tasks
are order independent.
Note that the interfaces added to an MP group must be physical. The logical
interfaces such as tunnel interfaces do not support this command.