Command Reference Guide

266ppp mp min-fragment 3Com Router 5000 Family and Router 6000 Family
Command Reference
ppp mp min-fragment
Purpose Use the ppp mp min-fragment command to set minimum size of outgoing
fragments.
Use the undo ppp mp min-fragment command to restore the default, that is,
128 bytes.
Syntax ppp mp min-fragment size
undo ppp mp min-fragment
Parameters size
Minimum packet size for MP outgoing packet
fragmentation. When the MP outgoing packet is
smaller than this value, fragmentation is avoided.
When the MP packet is larger than this value,
fragment is involved. Valid values are 128 to 1500
bytes.
Example Set the minimum packet of the MP packet fragmentation to 500 bytes.
[3Com-Virtual-Template10] ppp mp min-fragment 500
View This command can be used in the following views:
Virtual Template Interface view
Description If the small packet fragmentation is not expected, this command can be used to set
larger packet size value of the MP packet fragment.
Related Command ppp mp