Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp min-bind ● 265
Command Reference
ppp mp min-bind
Purpose Use the ppp mp min-bind command to configure the minimum number of PPP
links that an MP bundle must have.
Use the undo ppp mp min-bind command to restore the default when a call
requires only one PPP link.
Syntax ppp mp min-bind min-bind-num
undo ppp mp min-bind
Parameters min-bind-num
Minimum number of links in an MP bundle. Valid
values are 1 to 128.
Default By default, no lower limit of links is set for MP bundling.
Example Set the minimum number of channels an MP bundle must have to 4.
[3Com-dialer0] ppp mp min-bind 4
Remove the minimum number of channels setting you set.
[3Com-dialer0] undo ppp mp min-bind
View This command can be used in the following views:
■ Dialer Interface view
Description In a dial application where multiple links are required to carry services, it is necessary
to allow a packet trigger to call up multiple links to guarantee the minimum
bandwidth needed.
Note that, after you configure the ppp mp min-bind command, the router does
not look at the ratio of traffic to bandwidth when making calls to bring up links. As
for links that already exist, they are not torn down because of timeout. The
ppp mp
min-bind
command voids the dialer timer idle command, just as the
dialer threshold 0 command would.
The argument min-bind-num must be less than max-bind-num.
Related Commands ■ dialer threshold
■ ppp mp