Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
101102103104105106107108109110
3Com Router 5000 Family and Router 6000 Family debugging rsh ● 65
Command Reference
debugging rsh
Purpose Use the debugging rsh command to enable RSH debugging.
Use the undo debugging rsh command to disable RSH debugging.
Syntax debugging rsh
undo debugging rsh
Parameters None
Example Enable RSH debugging and then execute the rsh command.
<3Com> debugging rsh
<3Com> rsh 169.254.1.100 command cd c:
Trying 169.254.1.100 ...
Press CTRL+K to abort
*0.5850881 3Com RSH/8/REQUEST:User 3Com start connection to Server
(169.254.1.100)
*0.5850990 3Com RSH/8/SEND:User 3Com sent 23 byte(s) to server
(169.254.1.100)
*0.5851090 3Com RSH/8/RECV:User 3Com received 1 byte(s) from server
(169.254.1.100)
*0.5851200 3Com RSH/8/CLOSECONN:Server (169.254.1.100) closed
connection
View This command can be used in the following views:
■ User View
Description You can use this command to verify the configuration after you execute the rsh
command.