Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp lfi delay-per-frag ● 263
Command Reference
ppp mp lfi delay-per-frag
Purpose Use the ppp mp lfi delay-per-frag command to set the maximum time delay
for transmitting a LFI fragment.
Use the undo ppp mp lfi delay-per-frag command to restore the default
maximum time delay for transmitting an LFI fragment.
Syntax ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
Parameters time
The maximum time delay of LFI fragment in ms. Valid
values are 1 to 1000.
Default By default, the time delay of the fragment is 10ms after LFI is enabled on the Virtual
Template interface.
Example Set the maximum time delay of LFI fragment of Virtual-Template 1 to 20ms.
[3Com-Virtual-Template1] ppp mp lfi delay-per-frag 20
View This command can be used in the following views:
■ Virtual Template Interface view,
■ MP-Group Interface view
Related Command ppp mp lfi