Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp lfi ● 261
Command Reference
ppp mp lfi
Purpose Use the ppp mp lfi command to enable link fragmentation and interleaving (LFI)
on the interface.
Use the undo ppp mp lfi command to remove LFI from the interface.
Syntax ppp mp lfi
undo ppp mp lfi
Parameters None
Default By default, the time delay of the fragment is 10ms after LFI is enabled on the Virtual
Template interface.
Example [3Com-Virtual-Template1] ppp mp lfi
View This command can be used in the following views:
■ Virtual Template Interface view,
■ MP-Group Interface view
Related Command ppp mp lfi delay-per-frag