Command Reference Guide

260 ● ppp mp binding-mode 3Com Router 5000 Family and Router 6000 Family
Command Reference
ppp mp binding-mode
Purpose Use the ppp mp binding-mode command to set the MP binding condition.
Use the undo ppp mp binding-mode command to restore the default value of
the MP binding condition.
Syntax ppp mp binding-mode { authentication | both | descriptor }
undo ppp mp binding-mode
Parameters authentication
Performs the MP binding according to the
authentication user name of PPP.
both
Performs the MP binding based on both the
authentication user name of PPP and the terminal
identifier.
descriptor
Performs the MP binding according to the terminal
identifier.
Default By default, it performs the MP binding based on both the authentication user name
of PPP and the terminal identifier.
Example Perform MP bundling only based on the user name of the PPP authentication.
[3Com-Dialer0] ppp mp binding-mode authentication
View This command can be used in the following views:
■ Virtual Template Interface view,
■ Dialer Interface view
Description User name is the peer one received by the PPP link performing the PAP or CHAP
authentication, while the terminal identifier, as a unique flag of a Router, is the peer
one received in performing the LCP negotiation. The system can perform the MP
binding base on the received user name and terminal identifier, and then the
interfaces with the identical user name or the same terminal identifier is bound
together.
Related Command ppp mp user