Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp mp ● 259
Command Reference
ppp mp
Purpose Use the ppp mp command to enable the interface encapsulated with PPP to operate
in the MP mode.
Use the undo ppp mp command to enable the interface to operate in the Single PPP
mode
Syntax ppp mp
undo ppp mp
Parameters None
Default By default, the interface encapsulated with PPP operates in the Single PPP mode.
Example Configure the PPP encapsulated interface Serial0/0/0 to work in MP mode.
[3Com-Serial1/0/0] ppp mp
View This command can be used in the following views:
■ Interface view
Description .To increase the bandwidth, multiple PPP links can be bound to form a logical MP
interface. For this purpose, it is necessary to specify a virtual-template in system view.
MP can be configured and used only at the physical interfaces which can encapsulate
PPP. To enable MP, you must configure the
ppp mp command and the PAP or CHAP
authentication at the physical interface.
Related Commands ■ link-protocol ppp
■ ppp mp user
■ interface virtual-template