Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ppp compression stac-lzs ● 251

Command Reference

ppp compression stac-lzs

Purpose Use the ppp compression stac-lzs command to enable STAC-LZS compression

for PPP.

Use the undo ppp compression stac-lzs command to disable STAC-LZS

compression on the current interface.

Syntax ppp compression stac-lzs

undo ppp compression stac-lzs

Parameters None

Default By default, compression is disabled.

Example Enable STAC compression on the local router.

[3Com-Serial0/0/0] ppp compression stac-lzs

View This command can be used in the following views:

■ Interface view

Description You can configure STAC-LZS compression on an interface to reduce size of data

frames through lossless compression. However, as this can increase the load on the

router, you are recommended to disable the function when the load on the router is

heavy.

Note that STAC-LZS compression can take effect on a PPP link only when the

stac-lzs option is configured on both ends of the link.