Command Reference Guide

3Com Router 5000 Family and Router 6000 Family pvp create ● 243
Command Reference
pvp create
Purpose Use the pvp create command to create a virtual path.
Use the undo pvp create command to delete the virtual path.
Syntax pvp create vpi
undo pvp create
Parameters vpi
Virtual path identifier of ATM network. Valid values are
0 to 4095.
Default By default, no virtual path is created.
Example Create a virtual path with vpi of 22.
<3Com> system-view
[3Com] interface atm 1/0/0
[3Com-Atm1/0/0] atm-ctt
[3Com-Atm1/0/0] pvp create 22
View This command can be used in the following views:
■ Interface view
Description Only one virtual path can be created on one interface. If you have created one virtual
path, the executing of this command will delete the original virtual path and create a
new one.