Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mfr timer hello ● 233
Command Reference
mfr timer hello
Purpose Use the mfr timer hello command to set the interval for a frame relay bundle
link to send hello message.
Use the undo mfr timer hello command to restore the default setting.
Syntax mfr timer hello seconds
undo mfr timer hello
Parameters seconds
Interval for a bundle link to send hello message (in
seconds). Valid values are 1 to 180.
If no value is specified, the default is 10 seconds.
Example Set the bundle link Serial4/0/2 to send hello message once every 15 seconds.
[3Com-Serial4/1/2] mfr timer hello 15
View This command can be used in the following views:
■ Frame Relay Interface view
Description Both ends of a frame relay bundle link periodically send hello message to the peer
end. After the peer receives the hello message, it will response hello
acknowledgement message.
Related Commands ■ mfr timer ack
■ mfr retry