Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mfr retry ● 231
Command Reference
mfr retry
Purpose Use the mfr retry command to set the maximum times that a frame relay bundle
link can resend hello message when waiting for a hello acknowledgement message.
Use the undo mfr retry command to restore the default setting.
Syntax mfr retry number
undo mfr retry
Parameters number
The maximum times that a bundle link can resend
hello messages. Valid values are 1 to 5.
If no value is specified, the default is twice.
Example Set the bundle link Serial4/1/2 to resend hello message for 3 times at most.
[3Com-Serial4/1/2] mfr retry 3
View This command can be used in the following views:
■ Frame Relay Interface view
Description If the times that a bundle link resends hello message reach the maximum without
receiving acknowledgement from the peer, the system will regard the link protocol on
the bundle link to be malfunctioning.
Only after the link-protocol fr mfr command is used to associate a frame
relay bundle link interface with a frame relay bundle, can this command be
configured.
Related Commands ■ mfr timer ack
■ mfr timer hello