Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mfr fragment-size ● 229
Command Reference
mfr fragment-size
Purpose Use the mfr fragment-size command to configure the maximum fragment size
allowed on a frame relay bundle link.
Use the undo mfr fragment-size command to restore the default setting.
Syntax mfr fragment-size bytes
undo mfr fragment-size
Parameters bytes
Fragment size (in bytes). Valid values are 60 to 1500.
If no value is specified, the default maximum fragment
size allowed on a frame relay bundle link is 300 bytes.
Example Configure the maximum fragment size allowed on the multilink frame relay bundle
link Serial4/1/2 to be 70 bytes.
[3Com-Serial4/1/2] mfr fragment-size 70
View This command can be used in the following views:
■ Frame Relay Interface view
■ MFR Interface view
Description The priority of the fragment size configured in frame relay interface view is higher
than that of the one configured in MFR interface view.
Related Commands ■ mfr fragment
■ mfr window-size