Command Reference Guide

220 ● map bridge-group 3Com Router 5000 Family and Router 6000 Family
Command Reference
map bridge-group
Purpose Use the map bridge-group broadcast command to enable the PVC to transmit
and receive BPDUs.
Use the undo map bridge-group command to disable the PVC to transmit or
receive BPDUs.
Syntax map bridge-group broadcast
undo map bridge-group
Parameters None
Default By default, no bridge-group broadcast map is configured, and thus ATM interfaces
are disabled to transmit BPDUs.
Example Enable PVC 1/102 to transmit and receive BPDUs.
[3Com] interface atm 2/0/0
[3Com-Atm2/0/0] pvc 1/102
[3Com-atm-pvc-Atm2/0/0-1/102] map bridge-group broadcast
View This command can be used in the following views:
■ PVC view