Command Reference Guide

3Com Router 5000 Family and Router 6000 Family link-protocol fr mfr ● 213
Command Reference
link-protocol fr mfr
Purpose Use the link-protocol fr mfr command to configure the current physical
interface as an MFR bundle link and bundle it onto a specified MFR interface.
Syntax link-protocol fr mfr interface-number
Parameters interface-number
Interface number.
Default By default, there is no MFR bundle link.
Example Configure the current serial interface as a bundle link and add it onto the frame relay
bundle interface mfr4.
[3Com-Serial4/1/2] link-protocol fr mfr 4
View This command can be used in the following views:
■ Interface view
Description When this command is configured, the specified MFR interface must exist. A
maximum of 16 physical interfaces can be bundled onto an MFR interface.
To delete a physical interface from an MFR interface, use the link-protocol
command to apply a link layer protocol of non frame relay MFR to the interface.
Related Commands ■ interface mfr
■ mfr link-name