Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1021102210231024102510261027102810291030
208 ● lapb retry 3Com Router 5000 Family and Router 6000 Family
Command Reference
lapb retry
Purpose Use the lapb retry command to configure LAPB parameter N2.
Use the undo lapb retry command to restore the default value.
Syntax lapb retry n2-value
undo lapb retry
Parameters n2-value
The value of N2. Valid values are 1 to 255.
If no value is specified, the default parameter N2 of
LAPB is 10.
Example Set the LAPB parameter N2 on Serial0/0/0 to 20.
[3Com-Serial0/0/0] lapb retry 20
View This command can be used in the following views:
■ Interface view
Description The value of N2 indicates the maximum retries that DCE or DTE sends one frame to
DTE or DCE.