Command Reference Guide

3Com Router 5000 Family and Router 6000 Family isdn statistics ● 205
Command Reference
isdn statistics
Purpose Use the isdn statistics command to have the system make statistics on the
information received and transmitted at an ISDN interface.
Use the
isdn statistics start command in the view of an interface to start
making statistics on the messages received and transmitted at the interface.
Use the
isdn statistics display command to view the statistic information.
Use the
isdn statistics continue command to continue the effort in
making statistics.
Use the
isdn statistics display flow command to view the statistics in the
form of flow.
Use the
isdn statistics stop command to stop making statistics.
Syntax isdn statistics { clear | continue | display [ flow ] | start | stop }
Parameters clear
Clears the statistics.
continue
Continues counting.
display
Displays the statistics.
display flow
Displays the statistic information about message flows.
start
Starts counting.
stop
Stops counting.
Default By default, no statistics is made on the information transmitted and received at
interfaces.
Example Start counting incoming and outgoing messages on PRI interface serial 0/0/0:15.
[3Com-serial0/0/0:15] isdn statistics start
After a while, stop counting incoming and outgoing messages on PRI interface serial
0/0/0:15.
[3Com-serial0/0/0:15] isdn statistics stop
Display statistics about the received and sent messages for PRI interface serial
0/0/0:15.
[3Com-serial0/0/0:15] isdn statistics display
Q.931 message received and sent out on current port:
CALL_PROC Send(0) Recv(6)
SETUP Send(6) Recv(13)
CONN Send(13) Recv(5)
SETUP_ACK Send(0) Recv(6)