Command Reference Guide

200 ● isdn spid resend 3Com Router 5000 Family and Router 6000 Family
Command Reference
isdn spid resend
Purpose Use the isdn spid resend command to set the number of INFORMATION
message retransmission attempts for SPID negotiation or initialization on an
NI-compliant BRI interface.
Use the undo isdn spid resend command to restore the default number of
INFORMATION message retransmission attempts on the interface.
Syntax isdn spid resend times
undo isdn spid resend
Parameters times
An integer between 1 and 255.
If no value is specified, the default is 1.
Example Set the allowed number of INFORMATION retransmission attempts to five.
[3Com-bri0/0/0] isdn spid resend 5
View This command can be used in the following views:
■ ISDN BRI Interface view
Description On a BRI interface compliant with the ISDN protocol in North America, calls can be
placed only after the SPID negotiation or initialization is finished. The timer TSPID is
started when the terminal originates a negotiation or initialization request by sending
the INFORMATION message. If the terminal does not receive any response upon the
expiration of TSPID, it will retransmit the INFORMAITON message. You can use this
command to modify the number of INFORMATION message retransmission attempts.
This command applies only on NI-compliant BRI interfaces.