Command Reference Guide

3Com Router 5000 Family and Router 6000 Family isdn spid nit ● 199
Command Reference
isdn spid nit
Purpose Use the isdn spid nit command to set the SPID processing mode to NIT (Not
Initial Terminal) on an NI-compliant BRI interface.
Use the undo isdn spid nit command to disable the NIT mode on the BRI
interface.
Syntax isdn spid nit
undo isdn spid nit
Parameters None
Default By default, NIT mode does not apply on BRI interfaces. Instead, static SPID or dynamic
SPID negotiation is applied.
Example Ignore SPID negotiation and initialization on the interface bri0/0/0, i.e., adopting the
NIT mode.
[3Com-bri0/0/0] isdn spid nit
View This command can be used in the following views:
■ ISDN BRI Interface view
Description On an NI-compliant BRI interface, calls can be placed only after the SPID negotiation
or initialization is finished. When the router is communicating with an NI-compliant
exchange that does not support SPID negotiation, you can use this command to set
the SPID processing mode on the router to NIT and the ISDN will ignore ISPID
negotiation and initialization.
This command applies only on NI-compliant BRI interfaces.