Command Reference Guide

198 ● isdn spid auto_trigger 3Com Router 5000 Family and Router 6000 Family
Command Reference
isdn spid auto_trigger
Purpose Use the isdn spid auto_trigger command to enable SPID auto-negotiation
once on the BRI interface running the NI protocol.
Syntax isdn spid auto_trigger
Parameters None
Default By default, a BRI interface does not originate a SPID negotiation request unless
triggered by a call.
Example Manually trigger a new SPID negotiation request on the interface bri0/0/0.
[3Com-bri0/0/0] isdn spid auto_trigger
View This command can be used in the following views:
■ ISDN BRI Interface view
Description On a BRI interface compliant with the North American ISDN protocol, the router can
place a call only after SPID negotiation or initialization. SPID information can be
obtained via static configuration or dynamic negotiation. You may manually trigger a
new SPID negotiation request by executing this command if the SPID negotiation in
dynamic negotiation fails or just for the purpose of testing
This command applies only on the BRI interface running the NI protocol.