Command Reference Guide

3Com Router 5000 Family and Router 6000 Family isdn send-restart ● 197
Command Reference
isdn send-restart
Purpose Use the isdn send-restart command to enable PRI interfaces to actively send
ISDN RESTART messages to clear calls of the remote end before maintaining B
channels.
Use the undo isdn send-restart command to disable PRI interfaces to actively
send ISDN RESTART messages.
Syntax isdn send-restart
undo isdn send-restart
Parameters None
Default By default, the PRI interface actively sends RESTART messages to the remote end
before maintaining B channels.
Example Enable the PRI interface to send RESTART messages before maintaining B channels.
[3Com] isdn send-restart
Disable the PRI interface to send RESTART messages before maintaining B channels.
[3Com] undo isdn send-restart
View This command can be used in the following views:
■ System view