Command Reference Guide

58 ● debugging ip netstream 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ip netstream
Purpose Use the debugging ip netstream command to enable NetStream debugging.
Use the undo debugging ip netstream command to disable NetStream
debugging.
Syntax debugging ip netstream { packet | event }
undo debugging ip netstream { packet | event }
Parameters packet
Enables Netstream packet debugging.
event
Disables Netstream event debugging.
Default By default, NetStream debugging is disabled.
Example Enable NetStream packet debugging.
<R6000> debugging ip netstream packet
*0.7072525-NS-8-debug_case:
IP Netstream:
version5 inbound UDP packet of 12 streams is exported
*0.7072525-NS-8-debug_case:
IP Netstream:
Version8 AS aggregation outbound UDP packet of 12 streams is
exported
Enable NetStream event debugging.
<R6000> debugging ip netstream event
*0.7072525-NS-8-debug_case:
IP Netstream:
add an inbound stream to cache
interface : Ethernet2/0/0, protocol : 6, tos :0 SrcIp : 1.1.1.1,
DstIp : 2.2.2.2 , SrcPort : 222, DstPort :888
*0.7072525-NS-8-debug_case:
IP Netstream:
delete an outbound stream from cache for active timeout
interface : Ethernet2/0/0, protocol : 6, tos: 0, SrcIp :1.1.1.1,
DstIp : 2.2.2.2 , SrcPort: 222, DstPort :888
Table 4 Description on the fields of the debugging ip netstream packet command
Field Description
version5 inbound UDP packet
of 12 streams is exported
A version 5 UDP packet is created for statistics in the inbound
direction, covering information on 12 streams.
Version8 AS aggregation
outbound UDP packet of 12
streams is exported
A version 8 AS aggregation UDP packet is created for statistics
in the outbound direction, covering information on 12 streams.