Command Reference Guide

192 ● isdn pri-slipwnd-size 3Com Router 5000 Family and Router 6000 Family
Command Reference
isdn pri-slipwnd-size
Purpose Use the isdn pri-slipwnd-size command to set the slide window size on a PRI
interface.
Use the isdn pri-slipwnd-size default command to restore the default
slide window size on the PRI interface.
Syntax isdn pri-slipwnd-size window-size
isdn pri-slipwnd-size default
Parameters window-size
Slide window size. Valid values are 5 to 14.
If no value is specified, the default slide window size
on PRI interfaces is 7.
Example Configure the slide window size on the interface e1 0/0/0 to 10.
[3Com] controller e1 0/0/0
[3Com-E1 0/0/0] using
[3Com-E1 0/0] pri-set
[3Com-Serial0/0/0:15] isdn pri-slipwnd-size 10
View This command can be used in the following views:
■ Interface view