Command Reference Guide

186 ● isdn L3-timer 3Com Router 5000 Family and Router 6000 Family
Command Reference
isdn L3-timer
Purpose Use the isdn L3-timer command to configure the duration of an ISDN L3 timer.
Use the undo isdn L3-timer command to restore the default duration of the
ISDN L3 timer on the interface.
Syntax isdn L3-timer timer-name time-interval
undo isdn L3-timer { timer-name | all }
Parameters timer-name
Name of a L3 timer of the ISDN protocol.
time-interval
Timer duration, which can take on one of the values
listed in the following table.
all
Restores the default durations of all the L3 timers.
Default You can view the default durations of the L3 timers in the ISDN protocol by executing
the
display isdn parameters command.
Example Set the duration of the L3 timer T301 on the interface Bri 0/0/0 to 160 seconds.
[3Com-Bri0/0/0] isdn l3-timer t301 160
View This command can be used in the following views:
■ ISDN Interface view
Table 1 Description of Q931 timers
timer-name Value range (in units) Default (in units)
t301 30 to 1200 240
t302 5 to 60 15
t303 2 to 10 4
t304 10 to 60 30
t305 4 to 30 30
t308 2 to 10 4
t309 10 to 180 90
t310 10 to 180 40
t313 2 to 10 4
t316 2 to 180 120
t322 2 to 10 4