3Com Router 5000 Series and 3Com Router 6000 Series Command Reference Guide Router 5012 (3C13701) Router 5232 (3C13751) Router 5642 (3C13755) Router 5682 (3C13759) Router 6040 (3C13840) Router 6080 (3C13880) www.3Com.com Part Number: 10015621 Rev.
3Com Corporation 350 Campus Drive Marlborough, MA USA 01752-3064 Copyright © 2006, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.
ABOUT THIS GUIDE This guide describes the command line interface (CLI) configuration commands used to control the 3Com® 3Com Router 5000 Family and Router 6000 Familyof routers. About This Software Version The software in the 3Com® 3Com Router 5000 Family and Router 6000 Familyis a subset of that used in some other 3Com products.
● 3Com Router 5000 Family and Router 6000 Family Command Reference Table 2 Text conventions Convention Description Screen displays This typeface represents text as it appears on the screen. Keyboard key names If you must press two or more keys simultaneously, the key names are linked with a plus sign (+), for example: Press Ctrl+Alt+Del The words “enter” and “type” When you see the word “enter” in this guide, you must type something, and then press Return or Enter.
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF ● #"4*$ $0.."/%4 "-1)"#&5*$"- -*45*/( 0' $0..
● $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF BVUIFOUJDBUJPO TVQFS IXUBDBDT TDIFNF ● BVUIFOUJDBUJPO TVQFS IXUBDBDT TDIFNF 1VSQPTF 6TF UIF authentication super hwtacacs-scheme DPNNBOE UP DPOGJHVSF TVQFS BVUIFOUJDBUJPO TDIFNF GPS B EPNBJO 6TF UIF undo authentication TDIFNF GPS B EPNBJO 4ZOUBY super DPNNBOE UP EFMFUF TVQFS BVUIFOUJDBUJPO authentication super hwtacacs-scheme hwtacacs-scheme-name undo authentication super hwtacacs-scheme 1BSBNFUFST hwtacacs-scheme-name &YBNQMF
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DMPDL EBUFUJNF ● DMPDL EBUFUJNF 1VSQPTF 6TF UIF clock 4ZOUBY clock datetime time date 1BSBNFUFST time datetime date &YBNQMF DPNNBOE UP TFU UIF DVSSFOU UJNF BOE EBUF PG UIF SPVUFS 4QFDJGJFT UIF DVSSFOU UJNF JO HH:MM:SS GPSNBU 7BMJE WBMVFT GPS HH IPVST BSF UP 7BMJE WBMVFT GPS MM NJOVUFT BOE SS TFDPOET BSF UP *G OPU TQFDJGJFE UIF EFGBVMU JT 4QFDJGJFT UIF DVSSFOU EBUF JO UIF GPSNBU PG MM/DD/YYYY
● DMPDL TVNNFS UJNF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DMPDL TVNNFS UJNF 1VSQPTF 6TF UIF clock summer-time DPNNBOE UP TFU UIF OBNF BOE TUBSUJOH BOE FOEJOH UJNF PG UIF EBZMJHIU TBWJOH UJNF 6TF UIF undo clock EBZMJHIU TBWJOH UJNF 4ZOUBY summer-time DPNNBOE UP DBODFM UIF DPOGJHVSBUJPO PG UIF clock summer-time zone_name { one-off | repeating } start-time start-date end-time end-date add-time undo clock summer-time 1BSBNFUFST zone_name one-off repeating start-t
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DMPDL TVNNFS UJNF ● [3Com] clock summer-time z2 repeating 00:00:00 2001 January first Sunday 07:00:00 2002 January first Sunday 1 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 3FMBUFE $PNNBOE 4ZTUFN WJFX "GUFS UIF DPOGJHVSBUJPO UBLFT FGGFDU ZPV DBO VTF UIF display clock DPNNBOE UP WJFX JU #FTJEFT UIF UJNF PG UIF MPH PS EFCVH JOGPSNBUJPO JT UIF MPDBM UJNF PG XIJDI UIF UJNF [POF BOE EBZMJHIU TBWJOH UJNF IBT
● DMPDL UJNF[POF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DMPDL UJNF[POF 1VSQPTF 6TF UIF clock timezone DPNNBOE UP TFU MPDBM UJNF [POF JOGPSNBUJPO 6TF UIF undo clock timezone DPNNBOE UP SFUVSO UP UIF EFGBVMU XIJDI JT 6OJWFSTBM 5JNF $PPSEJOBUFE 65$ 4ZOUBY clock timezone zone_name { add | minus } time undo clock timezone 1BSBNFUFST zone_name add minus time &YBNQMF 4QFDJGJFT UIF OBNF PG UIF UJNF [POF XIJDI NBZ CF VQ UP DIBSBDUFST MPOH 4QFDJGJFT B QPTJUJWF PG
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DPNNBOE BMJBT FOBCMF ● DPNNBOE BMJBT FOBCMF 1VSQPTF 6TF UIF command-alias GVODUJPO 6TF UIF undo GVODUJPO 4ZOUBY enable DPNNBOE UP FOBCMF UIF DPNNBOE BMJBT command-alias enable DPNNBOE UP EJTBCMF UIF DPNNBOE BMJBT command-alias enable undo command-alias enable 1BSBNFUFST /POF %FGBVMU #Z EFGBVMU UIF DPNNBOE BMJBT GVODUJPO JT EJTBCMFE &YBNQMF &OBCMF UIF DPNNBOE BMJBT GVODUJPO [3Com] command-alias enable %JTBCMF UIF DPNNB
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DPNNBOE BMJBT NBQQJOH ● DPNNBOE BMJBT NBQQJOH 1VSQPTF 6TF UIF command-alias 6TF UIF undo 4ZOUBY mapping DPNNBOE UP NBQ BO BMJBT UP B LFZXPSE command-alias mapping DPNNBOE UP DBODFM UIF BMJBT TFUUJOH command-alias mapping cmdkey alias undo command-alias mapping alias 1BSBNFUFST cmdkey alias 5IF GJSTU LFZXPSE UP CF TVCTUJUVUFE JO DVSSFOU DPNNBOET CZ UIF BMJBT :PV NVTU QSPWJEF UIF DPNQMFUF LFZXPSE OBNF "MJBT BTTJHOFE CZ UI
● DPNNBOE QSJWJMFHF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DPNNBOE QSJWJMFHF 1VSQPTF 6TF UIF command-privilege DPNNBOET JO B TQFDJGJFE WJFX level DPNNBOE UP BTTJHO B DPNNBOE MFWFM UP UIF 6TF UIF undo command-privilege view DPNNBOE UP SFTUPSF UIF MFWFM PG UIF TQFDJGJFE DPNNBOE JO UIF TQFDJGJFE WJFX UP UIF EFGBVMU 4ZOUBY command-privilege level level view view command-key undo command-privilege view view command-key 1BSBNFUFST level level viewview command-key &YBN
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DQV VTBHF DZDMF ● DQV VTBHF DZDMF 1VSQPTF 6TF UIF cpu-usage cycle DPNNBOE UP TFU UIF $16 VTBHF TUBUJTUJD JOUFSWBM 4ZOUBY cpu-usage cycle { 5sec | 1min | 5min | 72min } [slave | slot slot-num } 1BSBNFUFST 5sec 4FUT UIF TUBUJTUJD JOUFSWBM UP GJWF TFDPOET 4FUT UIF $16 VTBHF TUBUJTUJD JOUFSWBM UP POF NJOVUF 4FUT UIF $16 VTBHF TUBUJTUJD JOUFSWBM UP GJWF NJOVUFT 4FUT UIF $16 VTBHF TUBUJTUJD JOUFSWBM UP NJOVUFT (JWFO B EVBM 316
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ DMJQCPBSE ● EJTQMBZ DMJQCPBSE 1VSQPTF 6TF UIF display clipboard DPNNBOE UP WJFX UIF DPOUFOUT PG UIF DMJQCPBSE 4ZOUBY display clipboard 1BSBNFUFST /POF %FGBVMU CPEZ &YBNQMF %JTQMBZ UIF DPOUFOUT PG UIF DMJQCPBSE <3Com> display clipboard -----------------clipboard ----------------ip route 10.1.0.0 255.0.0.
● EJTQMBZ DMPDL $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ DMPDL 1VSQPTF 6TF UIF display clock DPNNBOE UP EJTQMBZ UIF DVSSFOU TZTUFN UJNF BOE EBUF 4ZOUBY display clock 1BSBNFUFST /POF &YBNQMF %JTQMBZ UIF DVSSFOU TZTUFN EBUF BOE UJNF <3Com> display clock 15:50:45 UTC Mon 02/12/2003 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 3FMBUFE $PNNBOET "OZ WJFX *G UIF EJTQMBZFE TZTUFN UJNF BOE EBUF BSF JODPSSFDU VTF UIF clock DPNNBOE UP BE
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ DPNNBOE BMJBT ● EJTQMBZ DPNNBOE BMJBT 1VSQPTF 6TF UIF display TFUUJOHT command-alias DPNNBOE UP WJFX UIF DVSSFOU DPNNBOE BMJBT 4ZOUBY display command-alias 1BSBNFUFST /POF &YBNQMF %JTQMBZ UIF DVSSFOU DPNNBOE BMJBT TFUUJOHT [Quidway] display command-alias Command alias is enabled index alias command key 1 show display 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ "OZ WJFX
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ DQV VTBHF ● EJTQMBZ DQV VTBHF 1VSQPTF 4ZOUBY 1BSBNFUFST 6TF UIF display cpu-usage display cpu-usage [ configuration | number [ offset ] [ verbose ] [from-device ] ] %JTQMBZT UIF DPOGJHVSBUJPO BCPVU $16 VTBHF TUBUJTUJDT TVDI BT XIFUIFS $16 VTBHF TUBUJTUJDT JT FOBCMFE TUBUJTUJD JOUFSWBM BOE $16 VTBHF BMBSN UISFTIPMET /VNCFS PG $16 VTBHF TUBUJTUJDT RVFSJFT 0GGTFU PG UIF TUBSUJOH FOUSZ UP CF EJTQMBZFE UP UIF MBTU TUBUJT
● EJTQMBZ DQV VTBHF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF DHCP HOT DHCC 7JFX 0/ 0/ 0/ 33d fca 414 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 0% 0% 0% "OZ WJFX 5IF GVODUJPO PG CPUI display cpu-usage BOE display cpu-usage 1 verbose JT UP EJTQMBZ EFUBJMFE JOGPSNBUJPO PO UIF MBTU $16 VTBHF TUBUJTUJDT 0
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ DQV VTBHF IJTUPSZ ● EJTQMBZ DQV VTBHF IJTUPSZ 1VSQPTF 6TF UIF display cpu-usage history DPNNBOE UP WJFX JO HSBQIJDT UIF $16 VTBHF TUBUJTUJD IJTUPSZ PG UIF FOUJSF TZTUFN UIF TQFDJGJFE UBTL PS UIF JOUFSGBDF CPBSE JO UIF TQFDJGJFE TMPU 4ZOUBY display cpu-usage history [ task task-id ] [ slave | slot slot-num ] 1BSBNFUFST task task-id slave slot slot-num &YBNQMF 4QFDJGJFT B UBTL *% (JWFO B EVBM 316 &316 TVQQPSUFE EFWJD
● EJTQMBZ DQV VTBHF IJTUPSZ $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF %JTQMBZ UIF $16 VTBHF TUBUJTUJD IJTUPSZ PG UBTL [Router] display cpu-usage history task 6 100%| 95%| 90%| 85%| 80%| 75%| 70%| 65%| 60%| 55%| 50%| 45%| 40%| 35%| 30%| 25%| 20%| 15%| 10%| 5%| -----------------------------------------------------------10 20 30 40 50 60 (minutes) cpu-usage last 60 minutes(T03M) 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ "OZ WJFX
● EJTQMBZ IJTUPSZ DPNNBOE $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ IJTUPSZ DPNNBOE 1VSQPTF 6TF UIF display 4ZOUBY display history-command 1BSBNFUFST /POF &YBNQMF %JTQMBZ IJTUPSZ DPNNBOET history-command DPNNBOE UP WJFX UIF IJTUPSZ DPNNBOET <3Com> display history-command display interface displayinterface e 1/0/0 interface e 1/0/0 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO "OZ WJFX 5IF UFSNJOBM BVUPNBUJDBMMZ TBWFT UIF DPNNBOET
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ MPH TUBSUVQ ● EJTQMBZ MPH TUBSUVQ 1VSQPTF 6TF UIF display log SFTUPSBUJPO MPH TXJUDI startup DPNNBOE UP EJTQMBZ UIF TUBUF PG UIF DPOGJHVSBUJPO 4ZOUBY display log startup 1BSBNFUFST /POF &YBNQMF %JTQMBZ UIF TUBUF PG UIF DPOGJHVSBUJPO SFTUPSBUJPO MPH TXJUDI <3Com> log startup <3Com> display log startup Log startup switch is on. <3Com> undo log startup <3Com> display log startup Log startup switch is off.
● EJTQMBZ NFNPSZ $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ NFNPSZ 1VSQPTF 6TF UIF display memory DPNNBOE UP WJFX JOGPSNBUJPO PO TZTUFN NFNPSZ MPBE 4ZOUBY display memory 1BSBNFUFST /POF &YBNQMF %JTQMBZ JOGPSNBUJPO PO UIF DVSSFOU TZTUFN NFNPSZ MPBE display memory System Total Memory(bytes): 41918976 Total Used Memory(bytes): 15949136 Used Rate: 38% 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ "OZ WJFX
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF EJTQMBZ WFSTJPO ● EJTQMBZ WFSTJPO 1VSQPTF 6TF UIF display version DPNNBOE UP TZTUFN WFSTJPO JOGPSNBUJPO 4ZOUBY display version 1BSBNFUFST /POF &YBNQMF %JTQMBZ UIF TZTUFN WFSTJPO JOGPSNBUJPO PG UIF SPVUFS <3Com> display version Copyright Notice:SK_VSIR_NAME crea All rights reserved (Sep 13 2004).rule 1 de icmp ?create... 3Com-3Com Versatile Routing Platform Software VRP(R) software, Version 3.
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF GSFF VOVTFE QPSUUBH ● GSFF VOVTFE QPSUUBH 1VSQPTF 6TF UIF free unused porttag DPNNBOE UP SFMFBTF UIF QPSU UBH SFTPVSDFT VTFE CZ SFNPWFE JOUFSGBDFT GPS DSFBUJOH OFX JOUFSGBDFT 4ZOUBY free unused porttag 1BSBNFUFST /POF &YBNQMF 3FMFBTF UIF QPSU UBH SFTPVSDFT VTFE CZ SFNPWFE JOUFSGBDFT [3Com] free unused porttag 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 4ZTUFN WJFX 5IF QPSU UBH SFTPVSDFT DVSSFOUMZ B
● IFBEFS $PN 4XJUDI 'BNJMZ $PNNBOE 3FGFSFODF IFBEFS 1VSQPTF 6TF UIF header DPNNBOE UP DSFBUF B CBOOFS 6TF UIF undo 4ZOUBY header DPNNBOE UP DMFBS B CBOOFS header [ incoming | login | motd | shell ] text undo header [ incoming | login | motd | shell ] 1BSBNFUFST #BOOFS EJTQMBZFE XIFO B VTFS MPHT POUP B UFSNJOBM VTFS JOUFSGBDF -PHJO CBOOFS BU BVUIFOUJDBUJPO #BOOFS EJTQMBZFE CFGPSF UIF MPHJO JOUFSGBDF #BOOFS EJTQMBZFE GPS FOUFSJOH VTFS WJFX #BOOFS NFTTBHF XJUI UIF GJSTU DIBSBDUFS
$PN 4XJUDI 'BNJMZ $PNNBOE 3FGFSFODF 7JFX IFBEFS ● 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 4ZTUFN WJFX 5IF NPUE CBOOFS JT EJTQMBZFE XIFO B VTFS KVTU MPHT JO GSPN B VTFS JOUFSGBDF *G QBTTXPSE PS TDIFNF BVUIFOUJDBUJPO JT TFU UIF CBOOFS JT EJTQMBZFE CFGPSF MPHJO BVUIFOUJDBUJPO 5IF MPHJO CBOOFS JT EJTQMBZFE POMZ XIFO MPHJO BVUIFOUJDBUJPO JT TFU UP QBTTXPSE PS TDIFNF *U JT EJTQMBZFE BGUFS UIF NPUE CBOOFS JT EJTQMBZFE BOE CFGPSF MPHJO BVUIFOUJDBUJPO 5IF TIFMM CBOO
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF IPULFZ ● IPULFZ 1VSQPTF 6TF UIF hotkey DPNNBOE UP BTTJHO B IPU LFZ UP B DPNNBOE MJOF 6TF UIF undo hotkey DPNNBOE UP SFTUPSF UIF EFGBVMU BTTJHONFOU TDIFNF PG UIF TZTUFN $53-@( UP EJTQMBZ DVSSFOU DPOGJHVSBUJPO $53-@- UP EJTQMBZ JQ SPVUJOH UBCMF $53-@0 UP VOEP EFCVHHJOH BMM BOE OVMM UP PUIFS UXP IPU LFZT 4ZOUBY hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U ] command_text undo hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL
● IPULFZ $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF CTRL_Y CTRL_Z CTRL_] ESC_B ESC_D ESC_F ESC_N ESC_P ESC_< ESC_> 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO Delete all characters after the cursor. Return to the user view. Kill incoming connection or redirect connection. Move the cursor one word back. Delete remainder of word. Move the cursor forward one word. Move the cursor down a line. Move the cursor up a line.
● MBOHVBHF NPEF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF MBOHVBHF NPEF 1VSQPTF 6TF UIF language-mode DPNNBOE UP UPHHMF UIF EJTQMBZ MBOHVBHF PG UIF DPNNBOE MJOF JOUFSGBDF $-* CFUXFFO &OHMJTI BOE $IJOFTF 4ZOUBY language-mode { chinese | english } 1BSBNFUFST chinese english 4FUT UIF $-* MBOHVBHF FOWJSPONFOU UP $IJOFTF 4FUT UIF $-* MBOHVBHF FOWJSPONFOU UP &OHMJTI %FGBVMU #Z EFGBVMU UIF $-* MBOHVBHF NPEF JT TFU UP &OHMJTI &YBNQMF 5PHHMF UIF MBOHVBHF GSPN &OHMJTI
● MPDL $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF MPDL 1VSQPTF 6TF UIF lock DPNNBOE UP MPDL UIF BDUJWF VTFS JOUFSGBDF BOE QSFWFOU VOBVUIPSJ[FE VTFST GSPN BDDFTTJOH JU 5IF BDUJWF VTFS JOUFSGBDF DBO CF DPOTPMF "69 PS 75: 4ZOUBY lock 1BSBNFUFST /POF &YBNQMF -PH JO UISPVHI UIF DPOTPMF QPSU BOE MPDL UIF BDUJWF VTFS JOUFSGBDF <3Com>lock Password: xxxx Again: xxxx 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 6TFS WJFX "GUFS FOUFSJOH UIF lock
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF MPH TUBSUVQ ● MPH TUBSUVQ 1VSQPTF 6TF UIF log TXJUDI 6TF UIF undo TXJUDI 4ZOUBY startup DPNNBOE UP UVSO PO UIF DPOGJHVSBUJPO SFTUPSBUJPO MPH log startup DPNNBOE UP UVSO PGG UIF DPOGJHVSBUJPO SFTUPSBUJPO MPH log startup undo log startup 1BSBNFUFST /POF %FGBVMU #Z EFGBVMU UIF DPOGJHVSBUJPO SFTUPSBUJPO MPH TXJUDI JT UVSOFE PO &YBNQMF 5VSO PGG UIF DPOGJHVSBUJPO SFTUPSBUJPO MPH TXJUDI <3Com> undo log startup 7JFX 5IJT DP
● RVJU $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF RVJU 1VSQPTF 6TF UIF quit DPNNBOE UP SFUVSO GSPN DVSSFOU WJFX UP MPXFS MFWFM WJFX PS FYJU UIF TZTUFN JG DVSSFOU WJFX JT VTFS WJFX 4ZOUBY quit 1BSBNFUFST /POF &YBNQMF 3FUVSO GSPN TZTUFN WJFX UP VTFS WJFX [3Com-Ethernet1/0/0] quit [3Com] quit <3Com> 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 5IF GPMMPXJOH MJTUT UIF UISFF MFWFMT PG WJFXT BWBJMBCMF GSPN MPXFS MFWFM UP IJHIFS MFWFM ■ ■ ■ 3
● SFUVSO $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF SFUVSO 1VSQPTF 6TF UIF return DPNNBOE UP SFUVSO UP VTFS WJFX GSPN BOZ PUIFS WJFX 4ZOUBY return 1BSBNFUFST /POF &YBNQMF 3FUVSO UP VTFS WJFX GSPN BOZ PUIFS WJFX UIF FYBNQMF CFMPX TIPXT UIF DPNNBOE FOUFSFE GSPN UIF TZTUFN WJFX FOUFS UIF GPMMPXJOH [3Com] return <3Com> 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 3FMBUFE $PNNBOE "MM WJFXT FYDFQU 6TFS WJFX 6TF UIF return DPNNBOE UP SFUVSO U
● TVQFS $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TVQFS 1VSQPTF 6TF UIF super DPNNBOE UP TXJUDI UIF DVSSFOU VTFS MFWFM UP B TQFDJGJFE VTFS MFWFM PS UIF DPNNBOE MFWFM UIBU UIF VTFS DBO BDDFTT 4ZOUBY super [ level ] 1BSBNFUFST level &YBNQMF 4XJUDI UP VTFS MFWFM 4QFDJGJFT B VTFS MFWFM 7BMJE WBMVFT BSF UP <3Com> super 3 Password: User privilege changes to 3 level, just equal or less this level’s commands can be used.
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TVQFS ● DPSSFDU QBTTXPSE 0OMZ BGUFS UIF DPSSFDU QBTTXPSE JT FOUFSFE DBO UIFZ TXJUDI UP UIF IJHIFS MFWFM 0UIFSXJTF UIF PSJHJOBM VTFS MFWFM SFNBJOT VODIBOHFE 3FMBUFE $PNNBOE super password
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TVQFS BVUIFOUJDBUJPO NPEF ● TVQFS BVUIFOUJDBUJPO NPEF 1VSQPTF 6TF UIF TVQFS BVUIFOUJDBUJPO NPEF DPNNBOE UP DPOGJHVSF BVUIFOUJDBUJPO NPEF GPS UIF TVQFS DPNNBOE XIJDI DBO CF DPOGJHVSFE UP UIF GPMMPXJOH GPVS NPEFT ■ ■ ■ ■ TVQFS QBTTXPSE TDIFNF TVQFS QBTTXPSE TDIFNF TDIFNF TVQFS QBTTXPSE 4ZOUBY super authentication-mode { super-password | scheme }* 1BSBNFUFST super-password scheme "EPQUT TVQFS QBTTXPSE BVUIFOUJDBUJPO "EPQUT T
● TVQFS QBTTXPSE $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TVQFS QBTTXPSE 1VSQPTF 6TF UIF super password DPNNBOE UP TFU UIF QBTTXPSE OFFEFE UP TXJUDI GSPN B MPXFS VTFS MFWFM UP B IJHIFS POF 6TF UIF undo 4ZOUBY super password DPNNBOE UP DBODFM UIF DVSSFOU TFUUJOH super password [ level user-level ] { simple | cipher } password undo super password [ level user-level ] 1BSBNFUFST user-level simple cipher 3FWJFXFS $PNNFOU 6TFS MFWFM 7BMJE WBMVFT GPS UIJT BSHVNFOU
● TZTOBNF $PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TZTOBNF 1VSQPTF 6TF UIF sysname DPNNBOE UP TFU UIF OBNF PG UIF SPVUFS 4ZOUBY sysname sysname 1BSBNFUFST sysname %FGBVMU #Z EFGBVMU UIF OBNF PG UIF SPVUFS JT $PN &YBNQMF 4FU UIF OBNF PG UIF SPVUFS UP 3 4QFDJGJFT UIF OBNF PG UIF SPVUFS DPNQSJTFE PG B TUSJOH GSPN UP DIBSBDUFST MPOH [3Com] sysname R1760 [R1760] 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJOH WJFXT ■ %FTDSJQUJPO 4ZTUFN WJFX .
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF TZTUFN WJFX ● TZTUFN WJFX 1VSQPTF 6TF UIF system-view DPNNBOE UP FOUFS TZTUFN WJFX GSPN UIF DVSSFOU VTFS WJFX 4ZOUBY system-view 1BSBNFUFST /POF &YBNQMF 5P FOUFS TZTUFN WJFX GSPN VTFS WJFX FOUFS UIF GPMMPXJOH <3Com> system-view System View: return to User View with Ctrl+Z.
$PN 3PVUFS 'BNJMZ BOE 3PVUFS 'BNJMZ $PNNBOE 3FGFSFODF WSCE ● WSCE 1VSQPTF 6TF UIF vrbd DPNNBOE UP WJFX TPGUXBSF WFSTJPO EFUBJMT JODMVEJOH QSPEVDU TPGUXBSF WFSTJPO BOE UIF NBUDIFE QMBUGPSN TPGUXBSF WFSTJPO 4ZOUBY vrbd 1BSBNFUFST /POF &YBNQMF %JTQMBZ UIF JOUFSOBM WFSTJPO JOGPSNBUJPO [Router] vrbd Routing Platform Software Version 5000 8040V300R003B01D009 (COMWAREV300R002B11D001), RELEASE SOFTWARE Compiled Sep 13 2004 15:36:51 by sunyu 7JFX 5IJT DPNNBOE DBO CF VTFE JO UIF GPMMPXJ
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 SYSTEM MANAGEMENT ALPHABETICAL LISTING OF COMMANDS accounting commands 9 acl 10 activation-key 11 adv-factor 12 async mode padpos 13 async mode pos 14 async mode posapp 16 ascii 17 authentication-mode 18 auto-config 20 auto-execute command 22 auto-config enable 24 bims boot request 25 bims device-id string 26 bims enable 27 bims interval 28 bims ip address 29 bims request 30 bims sharekey 31 bims source ip-address 32 bims specify-time 33
2● 3Com Router 5000 Family and Router 6000 Family Command Reference debugging pos 61 debugging pos-app 62 debugging pos-interface 63 debugging rlogin 64 debugging rsh 65 debugging snmp-agent 66 debugging ssh server 67 debugging telnet 68 debugging_tftp-server 69 debugging vty 70 delete 71 delete 72 delete 73 description 74 destination-ip 75 destination-port 76 detect group 77 detect list 78 dir 79 dir 80 dir 82 direct listen-port 83 disconnect 84 display alarm urgent 85 display auto-config 86 display chan
3Com Router 5000 Family and Router 6000 Family Command Reference display rmon event 122 display rmon eventlog 123 display rmon history 124 display rmon prialarm 126 display rmon statistics 127 display rsa local-key-pair public 128 display rsa peer-public-key 129 display saved-configuration 130 display schedule reboot 132 display sftp source-ip 133 display snmp-agent 134 display snmp-agent community 135 display snmp-agent group 136 display snmp-agent mib-view 137 display snmp-agent statistics 139 display sn
4● 3Com Router 5000 Family and Router 6000 Family Command Reference ftp update 178 ftphost source-interface 179 ftphost source-ip 180 get 181 get 182 help 183 history-command max-size 184 history keep-time 185 history-record 186 history-records 187 http-operation 188 hwping 189 hwping-agent enable 190 hwping-agent max-requests 191 hwping-server enable 192 hwping-server tcpconnect 193 hwping-server udpecho 194 info-center channel 195 info-center console channel 196 info-center enable 197 info-center logbuf
3Com Router 5000 Family and Router 6000 Family Command Reference mkdir 231 mkdir 232 modem 233 modem timer answer 234 modem auto-answer 235 move 236 more 237 ntp-service access 238 ntp-service authentication enable 239 ntp-service authentication-keyid 240 ntp-service broadcast-client 241 ntp-service broadcast-server 242 ntp-service max-dynamic-sessions 243 ntp-service multicast-client 244 ntp-service multicast-server 245 ntp-service refclock-master 246 ntp-service reliable authentication-keyid 247 ntp-serv
6● 3Com Router 5000 Family and Router 6000 Family Command Reference redirect bind vpn-instance 287 redirect disconnect 288 redirect enable 289 redirect listen-port 290 redirect refuse-negotiation 291 redirect return-deal from-telnet 292 redirect return-deal from-terminal 293 redirect timeout 294 remotehelp 295 remove 296 remove slot 297 rename 298 rename 299 rename 300 reset alarm urgent 301 reset fcm 302 reset ip netstream statistics 303 reset logbuffer 304 reset pos 305 reset recycle-bin 306 reset saved
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent community 344 snmp-agent group 345 snmp-agent local-engineid 347 snmp-agent mib-view 348 snmp-agent packet max-size 349 snmp-agent sys-info 350 snmp-agent target-host 351 snmp-agent trap enable 353 snmp-agent trap life 355 snmp-agent trap queue-size 356 snmp-agent trap source 357 snmp-agent usm-user 358 source-interface 360 source-ip 361 source-port 362 speed 363 ssh authentication-type default 364 ssh client assign rsa-key 365 ssh
8● 3Com Router 5000 Family and Router 6000 Family Command Reference tftp host source-ip 402 tftp host source-interface 403 tftp hostname vpn-instance 404 tftp-server acl 406 tftp-server directory 407 tftp-server enable 408 tftp-server retry-times 409 tftp-server max-users 410 tftp-server timeout 411 tftp-server update 412 tftp source-interface 413 tftp source-ip 414 timeout 415 timer loop 416 timer wait 417 tos 418 tracert 419 ttl 421 undelete 422 undo schedule reboot 423 upgrade 424 upgrade 425 user 426
3Com Router 5000 Family and Router 6000 Family Command Reference accounting commands ● 9 accounting commands Purpose Use the accounting commands command to enable the system to start per-command accounting for terminal users logged into the user interface. Use the undo accounting commands command to stop per-command accounting for terminal users. Syntax accounting commands scheme undo accounting commands scheme Parameters scheme Default By default, per-command accounting is not configured.
10 ● acl 3Com Router 5000 Family and Router 6000 Family Command Reference acl Purpose Use the acl command to reference an ACL to control call-in and call-out of VTY (Telnet and SSH) users. Use the undo acl command to remove the ACL. Syntax acl acl-number { inbound | outbound } undo acl { inbound | outbound } Parameters acl-number Address access control list number. Valid values are 2000 to 3999. inbound Controls call-in. outbound Controls call-out.
3Com Router 5000 Family and Router 6000 Family Command Reference activation-key ● 11 activation-key Purpose Use the activation-key command to define a shortcut key or key combination for starting a terminal session. Use the undo activation-key command to remove the shortcut key or key combination used to start terminal sessions. Syntax activation-key character undo activation-key Parameters character Example Use character s as the shortcut key for starting terminal sessions.
12 ● adv-factor 3Com Router 5000 Family and Router 6000 Family Command Reference adv-factor Purpose Use the adv-factor command to configure the advantage factor which is used to count Mos and ICPIF value in a jitter voice test. Use the undo adv-factor command to restore the default. Syntax adv-factor adv-number undo adv-factor Parameters adv-number Advantage factor, used to count Mos and ICPIF value in a jitter voice test. Valid valuds are 0 to 20. If no value is specified, the default is 0.
3Com Router 5000 Family and Router 6000 Family Command Reference async mode padpos ● 13 async mode padpos Purpose Use the async mode padpos command to configure a POSPAD access port. Use the undo async mode padpos command to remove the POSPAD access port setting. Syntax async mode padpos pos-number undo async mode padpos Parameters pos-number Example Configure Async1/0/0 as POSPAD access port 200. Number for the POSPAD access port. Valid values are 0 to 255.
14 ● async mode pos 3Com Router 5000 Family and Router 6000 Family Command Reference async mode pos Purpose Use the async mode pos pos-number command to create a POS access port in nontransparent transmission and permanent TCP connection mode. Use the async mode pos pos-number app ip-address port-number command to create a POS access port in transparent transmission mode.
3Com Router 5000 Family and Router 6000 Family Command Reference async mode pos ● 15 As asynchronous and FCM interfaces operate in protocol mode by default, no POS access port is configured by default. An interface can receive POS packets only after it is configured as a POS access port with POS access server enabled. The async mode pos command has no undo form. To cancel the command, use the async mode protocol command.
16 ● async mode posapp 3Com Router 5000 Family and Router 6000 Family Command Reference async mode posapp Purpose Use the async mode posapp command to configure the interface to operate in POS application mode. Use the undo async mode posapp command to disable the interface to operate in POS application mode. Syntax async mode posapp app-number undo async mode posapp Parameters app-number Default By default, the interface operates in protocol mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ascii Purpose Use the ascii command to set the type of the transmitted data to ASCII. Syntax ascii Parameters None Default By default, the data type is ASCII. Example Set the type of the transmitted data to ASCII. [ftp] ascii 200 Type set to A.
18 ● authentication-mode 3Com Router 5000 Family and Router 6000 Family Command Reference authentication-mode Purpose Use the authentication-mode command to set the authentication mode at login. Use the authentication-mode none command to set the authentication mode to none, that is, no authentication at login. Use the undo authentication-mode command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference authentication-mode ● 19 is optional. Without this configuration, the login mode of the users using the original version of VRP does not change. Domain configuration is valid on both VTY and Console users, while the banner message is only valid for Telnet and Terminal users. This is because SSH client can be provided by the third party and the interaction mode of the client cannot be modified.
20 ● auto-config 3Com Router 5000 Family and Router 6000 Family Command Reference auto-config Purpose Use the auto-config command to implement the auto-config operation. Syntax auto-config Parameters None Example Start the auto-config operation. [3Com] auto-config View This command can be used in the following views: ■ Description System view Enabling auto-config is equivalent to executing commands in batch.
3Com Router 5000 Family and Router 6000 Family Command Reference auto-config ● 21 level 3 service-type ftp service-type terminal telnet By default, the user name and password are both “admin”. 3. Detecting all the controller interfaces, including E1/T1/E3/T3 interfaces, setting their operating status to non-channelized, generating the corresponding serial interfaces. On the T1 interface, use the channel-set command to bundle all the timeslots into one serial interface.
22 ● auto-execute command 3Com Router 5000 Family and Router 6000 Family Command Reference auto-execute command Purpose Use the auto-execute command command to set a command to be automatically executed. Use the undo auto-execute command command to disable command auto-execution. Syntax auto-execute command command undo auto-execute command Parameters command Default By default, command auto-execution is disabled. Example Allow the system to execute the telnet 10.110.100.
3Com Router 5000 Family and Router 6000 Family Command Reference auto-execute command ● 23 Take caution when using this command on a user interface. It disables you to configure the system on the user interface. CAUTION: Before configuring the auto-execute command command and saving it with the save command, make sure that means exist that allow you to access the system to remove the configuration.
24 ● auto-config enable 3Com Router 5000 Family and Router 6000 Family Command Reference auto-config enable Purpose Use the auto-config enable command to enable auto-config. Use the undo auto-config command to disable auto-config. Syntax auto-config enable undo auto-config Parameters None Example Enable auto-config. [3Com] auto-config enable Disable auto-config.
3Com Router 5000 Family and Router 6000 Family Command Reference bims boot request ● 25 bims boot request Purpose Use the bims boot request command to enable the BIMS device to access the branch intelligent management system (BIMS) center at startup. Use the undo bims boot request command to disable the BIMS device to access the BIMS center automatically at startup. Syntax bims boot request undo bims boot request Default By default, the BIMS device does not access the BIMS center at startup.
3Com Router 5000 Family and Router 6000 Family Command Reference bims enable Purpose Use the bims enable command to enable BIMS. Use the undo bims enable command to disable BIMS. Syntax bims enable undo bims enable Default By default, BIMS is not enabled. Example Enable BIMS.
28 ● bims interval 3Com Router 5000 Family and Router 6000 Family Command Reference bims interval Purpose Use the bims interval command to configure the interval for accessing the BIMS center. When the interval is set to 0, the BIMS device does not access the BIMS center regularly. Use the undo bims interval command to delete the interval specified for accessing the BIMS center.
3Com Router 5000 Family and Router 6000 Family Command Reference bims ip address ● 29 bims ip address Purpose Use the bims ip address command to configure the IP address and port number of the BIMS center. Use the undo bims ip address command to delete the configuration. Syntax bims ip address ip-address [ port portnumber ] undo bims ip address Parameters ip-address IP address of the BIMS center. portnumber Port number used by the BIMS center.
30 ● bims request 3Com Router 5000 Family and Router 6000 Family Command Reference bims request Purpose Use the bims request command to have the BIMS device access the BIMS center. Syntax bims request Example Access the BIMS center.
3Com Router 5000 Family and Router 6000 Family Command Reference bims sharekey ● 31 bims sharekey Purpose Use the bims sharekey command to configure the shared key between the BIMS device and the BIMS center. Use the undo bims sharekey command to delete the shared key. Syntax bims sharekey { simple | cipher } sharekey undo bims sharekey Parameters Example sharekey Shared Key between the BIMS device and the BIMS center. The Shared Key is 16 bits long. simple Displays the shared key in clear text.
32 ● bims source ip-address 3Com Router 5000 Family and Router 6000 Family Command Reference bims source ip-address Purpose Use the bims source ip-address command to specify a source IP address for the packets sent by the BIMS device. It can be the IP address of a port on the router. Use the undo bims source ip-address command to delete the source IP address configured for the BIMS device.
3Com Router 5000 Family and Router 6000 Family Command Reference bims specify-time ● 33 bims specify-time Purpose Use the bims specify-time command to configure the BIMS device to access the BIMS center at the specified time and if desired, configure the device to access the BIMS center at regular intervals from then on during a specified period. Use the undo bims specify-time command to delete the setting.
34 ● binary 3Com Router 5000 Family and Router 6000 Family Command Reference binary Purpose Use the binary command to set data type to binary for file transfer. Syntax binary Parameters None Example Enable file transfer in binary mode. [ftp] binary 200 Type set to B.
3Com Router 5000 Family and Router 6000 Family Command Reference bootfile backup ● 35 bootfile backup Purpose Use the bootfile backup command to specify the backup boot file. Syntax bootfile backup backup-bootfile-name Parameters backup-bootfile-name Example Specify a backup boot file. Backup boot file for the router. If the specified file is not located on the current directory, you must specify the path to it also. [3Com]bootfile backup router.
36 ● bootfile backup View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description System view For more information about boot files and the order in which they are used, see the section “bootfile main”. This command is only available with the routers that support the dual image function.
3Com Router 5000 Family and Router 6000 Family Command Reference bootfile dir ● 37 bootfile dir Purpose Use the bootfile dir command to view information about all the boot files in the Flash, including file type, date, time, file size, and file name. Syntax bootfile dir Parameters None Example Display the information about all the boot files in the Flash.
38 ● bootfile dir View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Related Commands System view This command is available only when your router is available with the dual image function. In addition, boot files must be put on the Flash:/ directory, or if a CF card is available, on the Cflash:/ directory.
3Com Router 5000 Family and Router 6000 Family Command Reference bootfile main ● 39 bootfile main Purpose Use the bootfile main command to specify the main boot file. Syntax bootfile main main-bootfile-name Parameters main-bootfile-name Example Specify a main boot file. Main boot file for the router. If the specified file is not located on the current directory, you must specify the path to it also. [3Com] bootfile main router.
40 ● bootfile main View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description System view On a router supporting the dual image function (a Flash larger than 8 MB must be available), three boot files are defined in the system by default: main boot file, backup boot file, and secure boot file. The system uses them in the following order: ■ Main boot file, with the default name being main.
3Com Router 5000 Family and Router 6000 Family Command Reference bye ● 41 bye Purpose Use the bye command to terminate the connection to the remote SFTP server and exit to system view as you would with the exit and quit commands. Syntax bye Parameters None Example Terminate the connection to the remote SFTP server.
42 ● bye 3Com Router 5000 Family and Router 6000 Family Command Reference bye Purpose Use the bye command to disconnect from the remote FTP server and exit to user view. Syntax bye Parameters None Example Terminate the connection with the remote FTP server and exit to user view.
3Com Router 5000 Family and Router 6000 Family Command Reference cd ● 43 cd Purpose Use the cd command to change the current working directory of the user to the specified directory. Syntax cd directory Parameters directory Default The default path for working directory is flash Example Change the current working directory on the router to test. Name of the target directory. <3Com> pwd flash: <3Com> cd test <3Com> pwd flash:/test Change the current working directory to cflash.
44 ● cd 3Com Router 5000 Family and Router 6000 Family Command Reference cd Purpose Use the cd command to change the current working directory path on the remote FTP server. Syntax cd pathname Parameters pathname Example Change the current working directory path to d:/temp. Path name. [ftp] cd d:/temp View This command can be used in the following views: ■ Description FTP Client view You can use this command for accessing another directory on the FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference cd ● 45 cd Purpose Use the cd command to change the current path on the SFTP server. If you do not specify the remote-path argument, the current path is displayed. Syntax cd [remote-path ] Parameters remote-path Example Change current path to d:/temp. Name of a path on the server.
46 ● cdup 3Com Router 5000 Family and Router 6000 Family Command Reference cdup Purpose Use the cdup command to quit to the upper directory. Syntax cdup Parameters None Example Exit to the upper directory.
3Com Router 5000 Family and Router 6000 Family Command Reference cdup ● 47 cdup Purpose Use the cdup command to return from the current working directory path to the upper directory. Syntax cdup Parameters None Example Change the current working directory path to the upper directory.
48 ● close 3Com Router 5000 Family and Router 6000 Family Command Reference close Purpose Use the close command to terminate the connection to the remote FTP server, but remain in FTP client view. Syntax close Parameters None Example Terminate the connection to the remote FTP server but remain in FTP client view.
3Com Router 5000 Family and Router 6000 Family Command Reference copy ● 49 copy Purpose Use the copy command to copy a file. Syntax copy filename-source filename-dest Parameters filename-source Name of the source file. filename-dest Name of the target file or directory. Example <3Com> pwd flash: <3Com> dir Directory of flash:/ 0 1 2 -rw-rw-rw- 7654528 4 300 Oct 10 2002 10:10:10 Aug 23 2052 15:44:54 Aug 23 2052 15:45:58 system snmpboots vrpcfg.
50 ● count 3Com Router 5000 Family and Router 6000 Family Command Reference count Purpose Use the count command to configure the number of packets to be sent for each test. Use the undo count command to restore the default. Syntax count times undo count Parameters times Example Send ten packets for each test. Number of the test packets to be transmitted. Valid values are1 to 15. If no value is specified, the default is 1.
3Com Router 5000 Family and Router 6000 Family Command Reference databits ● 51 databits Purpose Use the databits command to set data bits on the user interface. Use the undo databits command to restore the default. Syntax databits { 5 | 6 | 7 | 8 } undo databits Parameters Example 5 Five data bits. 6 Six data bits. 7 Seven data bits. 8 Eight data bits, which is the default. Set data bits to 5.
52 ● datafill 3Com Router 5000 Family and Router 6000 Family Command Reference datafill Purpose Use the datafill command to configure the data for padding test packets. Use the undo datafill command to restore the default. Syntax datafill string undo datafill Parameters string Example Configure a packet padding string “abcd”. Data for padding test packets. Valid values are any string less than 230 characters long.
3Com Router 5000 Family and Router 6000 Family Command Reference datasize ● 53 datasize Purpose Use the datasize command to configure the size of test packets. Use the undo datasize command to restore the default. Syntax datasize size undo datasize Parameters Test packet size in bytes, the range of which depends on test type. size Table 2 Test packet size of HWPing Test Type Code Range Default value Jitter None 68-8100 68 Jitter G.711 A-Law 16-1500 172 Jitter G.
54 ● debugging 3Com Router 5000 Family and Router 6000 Family Command Reference debugging Purpose Use the debugging command to enable system debugging. Use the undo debugging command to disable system debugging Syntax debugging { all [ timeout minutes ] | module-name [ debug-option1 ] [ debug-option2 ] …} undo debugging { all | module-name [ debug-option1 ] [ debug-option2 ] … } Parameters all Enables or disables all debugging switches.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging Purpose Use the debugging command to enable debugging. Use the undo debugging command to disable debugging. Syntax debugging undo debugging Parameters None Default By default, FTP client debugging is disabled. Example Enable debugging.
56 ● debugging bims all 3Com Router 5000 Family and Router 6000 Family Command Reference debugging bims all Purpose Use the debugging bims all command to enable BIMS debugging. Use the undo debugging bims all command to disable BIMS debugging. Syntax debugging bims all undo debugging bims all Default By default, BIMS debugging is disabled. Example Enable BIMS debugging. <3Com> debugging bims all <3Com> system-view [3Com] bims request Now start visit the bims server . *0.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging bims all ● 57 The host name is:10.153.21.96, the Path is:/bims/service, Port:80 <3Com> *0.1271553 3Com BIMS/8/debug2: Have send file confirm request message,ulRet = 0 *0.1271553 3Com BIMS/8/debug2: Msgid = 6 *0.1271554 3Com BIMS/8/debug2: The return code string is: 0 *0.1271555 3Com BIMS/8/debug2: Parse the Xml file Ret = 0 Table 3 Description on the fields of the debugging bims all command Field Description The host name is:10.
58 ● debugging ip netstream 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip netstream Purpose Use the debugging ip netstream command to enable NetStream debugging. Use the undo debugging ip netstream command to disable NetStream debugging. Syntax debugging ip netstream { packet | event } undo debugging ip netstream { packet | event } Parameters packet Enables Netstream packet debugging. event Disables Netstream event debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip netstream ● 59 *0.7072525-NS-8-debug_case: IP Netstream: delete an outbound stream from cache for inactive timeout interface : Ethernet2/0/0, protocol : 6, tos : 0, SrcIp: 1.1.1.1, DstIp : 2.2.2.2 , SrcPort :222, DstPort : 888 *0.7072525-NS-8-debug_case: IP Netstream: deleting an inbound stream from cache for tcp end interface : Ethernet2/0/0, protocol : 17, tos :0, SrcIp :1.1.1.1, DstIp: 2.2.2.2 , SrcPort:222, DstPort : 888 *0.
60 ● debugging ntp-service 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ntp-service Purpose Use the debugging ntp-service command to enable NTP service debugging. Use the undo debugging ntp-service command to disable NTP service debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pos ● 61 debugging pos Purpose Use the debugging pos event command to enable event debugging for the POS access service. Use the debugging pos error command to enable error debugging for the POS access service. Use the debugging pos packet command to enable packet debugging for the POS access service. Use the debugging pos all command to enable all debugging for the POS access service.
62 ● debugging pos-app 3Com Router 5000 Family and Router 6000 Family Command Reference debugging pos-app Purpose Use the debugging pos-app command to enable debugging for the specified or all POS applications. Use the undo debugging pos-app command to disable debugging output for the specified or all POS applications. Syntax debugging pos-app [ app-number ] undo debugging pos-app [ app-number ] Parameters app-number Example Enable debugging for POS application 5. Number of a POS application.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pos-interface ● 63 debugging pos-interface Purpose Use the debugging pos-interface command to enable debugging for the specified or all POS access ports. Use the undo debugging pos-interface pos-number command to disable debugging output for the specified or all POS access ports.
64 ● debugging rlogin 3Com Router 5000 Family and Router 6000 Family Command Reference debugging rlogin Purpose Use the debugging rlogin command to enable remote login (rlogin) debugging. Use the undo debugging rlogin command to disable rlogin debugging. Syntax debugging rlogin undo debugging rlogin Parameters None Default By default, rlogin debugging is disabled. Example Enable rlogin debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging rsh ● 65 debugging rsh Purpose Use the debugging rsh command to enable RSH debugging. Use the undo debugging rsh command to disable RSH debugging. Syntax debugging rsh undo debugging rsh Parameters None Example Enable RSH debugging and then execute the rsh command. <3Com> debugging rsh <3Com> rsh 169.254.1.100 command cd c: Trying 169.254.1.100 ... Press CTRL+K to abort *0.
66 ● debugging snmp-agent 3Com Router 5000 Family and Router 6000 Family Command Reference debugging snmp-agent Purpose Use the debugging snmp-agent command to enable SNMP agent debugging and specify the information to be output. Use the undo debugging snmp-agent command to disable SNMP agent debugging. Syntax debugging snmp-agent { header | packet | process | trap } undo debugging snmp-agent { header | packet | process | trap } Parameters header Enables header debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ssh server ● 67 debugging ssh server Purpose Use the debugging ssh server command to output information such as the negotiation process regulated by SSH1.5 protocol to information center as debugging formation and to debug a user interface separately. Use the undo debugging ssh server command to disable debugging.
68 ● debugging telnet 3Com Router 5000 Family and Router 6000 Family Command Reference debugging telnet Purpose Use the debugging telnet command to enable Telnet connection debugging. Use the undo debugging telnet command to disable Telnet connection debugging. Syntax debugging telnet undo debugging telnet Parameters None Default By default, Telnet connection debugging is disabled. Example Debug Telnet connections.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging_tftp-server ● 69 debugging_tftp-server Purpose Use the debugging tftp-server command to enable TFTP server debugging. Use the undo debugging tftp-server command to disable TFTP sever debugging. Syntax debugging tftp-server { event | packet } undo debugging tftp-server Parameters Example event Enables event debugging. packet Enables packet debugging. Enable TFTP server event debugging.
70 ● debugging vty 3Com Router 5000 Family and Router 6000 Family Command Reference debugging vty Purpose Use the debugging vty command to enable VTY debugging. Use the undo debugging vty command to disable VTY debugging Syntax debugging vty { fsm | negotiate } undo debugging vty { fsm | negotiate } Parameters Example fsm Telnet state machine debugging. negotiate VTY option negotiation debugging. Enable VTY option negotiation debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference delete ● 71 delete Purpose Use the delete command to move the specified file from the storage device to the recycle bin, where you can completely delete the file with the undelete command or restore it with the reset recycle-bin filename command. Use the delete /unreserved command to delete the specified file completely, meaning the file cannot be restored.
72 ● delete 3Com Router 5000 Family and Router 6000 Family Command Reference delete Purpose Use the delete command to delete the specified file. Syntax delete remotefile Parameters remotefile Example Delete file temp.c. File name. [ftp] delete temp.
3Com Router 5000 Family and Router 6000 Family Command Reference delete ● 73 delete Purpose Use the delete command to delete the specified file from the server as you would with the remove command. Syntax delete remote-file Parameters remote-file Example Delete file temp.c from the server. Name of a file on the server. sftp-client> delete temp.
74 ● description 3Com Router 5000 Family and Router 6000 Family Command Reference description Purpose Use the description command to briefly describe a test operation. Use the undo description command to delete the configured description. Syntax description string undo description Parameters string Example Describe a test group as “icmp-test”. Brief description about a test operation. By default, no description is configured.
3Com Router 5000 Family and Router 6000 Family Command Reference destination-ip ● 75 destination-ip Purpose Use the destination-ip command to configure the destination IP address in the test. Use the undo destination-ip command to delete the configured destination IP address. Syntax destination-ip ip-address undo destination-ip Parameters ip-address Default By default, no destination IP address is configured for any test. Example Set the destination IP address in the test to 169.254.10.3.
76 ● destination-port 3Com Router 5000 Family and Router 6000 Family Command Reference destination-port Purpose Use the destination-port command to configure the destination port in the test. Use the undo destination-port command to delete the configured destination port. Syntax destination-port port-number undo destination-port Parameters port-number Default By default, no destination port is configured for any test. Example Set the destination port to 9000 in the test.
3Com Router 5000 Family and Router 6000 Family Command Reference detect group ● 77 detect group Purpose Use the detect-group command to create a detect group and enter its view. Use the undo detect-group command to remove a specified detect group. Syntax detect-group group-number undo detect-group group-number Parameters group-number Example Create a detect group numbered 10. Number for the detect group. Valid values are 1 to 100. <3Com> system-view System View: return to User View with Ctrl+Z.
78 ● detect list 3Com Router 5000 Family and Router 6000 Family Command Reference detect list Purpose Use the detect-list command to add an IP address to the detect group and assign the address a detecting sequence number. Use the undo detect-list command to remove an IP address from the detect group. Syntax detect-list list-number ip address ip-address [ nexthop ip-address ] undo detect-list list-number Parameters Example list-number Sequence number for an address to be probed in the detect group.
3Com Router 5000 Family and Router 6000 Family Command Reference dir ● 79 dir Purpose Use the dir command to view the files in the specified directory as you would with the ls command. Syntax dir [remote-path ] Parameters remote-path Example Display directory flash:/.
80 ● dir 3Com Router 5000 Family and Router 6000 Family Command Reference dir Purpose Use the dir command, you can view information about the specified file or directory in the router storage device. Syntax dir [ /all | filename ] Parameters /all Displays all files (including the deleted files). filename Name of the file or directory to be displayed including the path. Default By default, this command displays the file information under the current directory.
3Com Router 5000 Family and Router 6000 Family Command Reference dir ● 81 The dir /all command can display information about all the files, including those in the recycle bin. The names of these deleted files are enclosed by "[]", for example, [temp.cfg]. Such deleted files can be restored using the undelete command. To remove the files from the recycle bin completely, use the reset recycle-bin command. The dir /h command displays information about the private files under the current path.
82 ● dir 3Com Router 5000 Family and Router 6000 Family Command Reference dir Purpose Use the dir command to query for a specified file. Syntax dir [ filename ] Parameters filename Example Query for file temp.c. Name of the queried directory or file. [ftp] dir temp.c View This command can be used in the following views: ■ Description FTP Client view This command displays one or all the files under the directory.
3Com Router 5000 Family and Router 6000 Family Command Reference direct listen-port ● 83 direct listen-port Purpose Use the direct listen-port X command to set the listening port for vty. Use the undo direct listen-port command to restore the default port number. Syntax direct listen-port port-number undo direct listen-port Parameters port-number Example Configure listening port for vty line 2 to 3000. Port number. Valid values are 3000 to 3100.
84 ● disconnect 3Com Router 5000 Family and Router 6000 Family Command Reference disconnect Purpose Use the disconnect command to disconnect from the remote FTP server but remain in FTP client view. Syntax disconnect Parameters None Example Disconnect from the remote FTP server but remain in FTP client view.
3Com Router 5000 Family and Router 6000 Family Command Reference display alarm urgent ● 85 display alarm urgent Purpose Use the display alarm urgent command to view the stored alarms in a specified way. Syntax display alarm urgent [ time | slot | id ] Parameters time Displays alarms by time. id Displays alarms by ID. slot Displays alarms by slot. Example Display all the stored alarms.
86 ● display auto-config 3Com Router 5000 Family and Router 6000 Family Command Reference display auto-config Purpose Use the display auto-config command to view the status of auto-config. Syntax display auto-config Parameters None Example Display the status of auto-config.
3Com Router 5000 Family and Router 6000 Family Command Reference display channel ● 87 display channel Purpose Use the display channel command to view the contents in an information channel. Syntax display channel [ channel-number | channel-name ] Parameters channel-number Channel number. Valid values are 0 to 9. (The system has 10 channels.) channel-name Channel name.
88 ● display channel Description 3Com Router 5000 Family and Router 6000 Family Command Reference When executed without any parameter specified, this command displays the settings of all channels.
3Com Router 5000 Family and Router 6000 Family Command Reference display configure-user ● 89 display configure-user Purpose Use the display configure-user command to view information about the user who is currently authorized to configure the equipment. Syntax display configure-user Parameters None Example Display information about the user who is currently authorized to configure the equipment.
90 ● display current-configuration 3Com Router 5000 Family and Router 6000 Family Command Reference display current-configuration Purpose Use the display current-configuration command to view the running configurations on the router.
3Com Router 5000 Family and Router 6000 Family Command Reference display current-configuration ● 91 # interface Aux0 link-protocol ppp # interface Ethernet0/0/0 # interface Serial0/0/0 link-protocol ppp # interface NULL0 # bgp 15535 undo synchronization # # ospf 2 router-id 1.1.1.
92 ● display current-configuration 3Com Router 5000 Family and Router 6000 Family Command Reference 32: user-interface vty 0 4 33: # 34: return View This command can be used in the following views: ■ Description Any view The current parameters that take the default values are not displayed. After you complete some configuration tasks, you can execute the display current-configuration command to verify them.
3Com Router 5000 Family and Router 6000 Family Command Reference display debugging ● 93 display debugging Purpose Use the display debugging command to view the enabled debugging switches. Syntax display debugging [ interface interface-type interface-number] [ module-name ] Parameters module-name Module name. interface-type Interface type. interface-number Interface number. Default By default, no parameters are defined and all the enabled debugging switches are displayed.
94 ● display detect group 3Com Router 5000 Family and Router 6000 Family Command Reference display detect group Purpose Use the display detect-group command to display configuration information about a specified detect group or all detect groups. Syntax display detect-group [ group-number ] Parameters group-number Example Display configuration information about detect group 1. Number of the detect group to be displayed. Valid values are 1 to 100.
3Com Router 5000 Family and Router 6000 Family Command Reference display device ● 95 display device Purpose Use the display device command to view information on the hardware configurations of the system, including in-position state of the RPU, NPU, interface cards, power module, and fan module, the operating state of the interface cards, power module, and fan module, as well as the offline state of RPU and NPU.
96 ● display diagnostic-information 3Com Router 5000 Family and Router 6000 Family Command Reference display diagnostic-information Purpose Use the display diagnostic-information command to view the operating information about the active modules in the system. Syntax display diagnostic-information Parameters None Example Display the technical support information.
3Com Router 5000 Family and Router 6000 Family Command Reference display diagnostic-information ● 97 … … ========================================================= ===============display ip statistics=============== ========================================================= … … ======================================================== ===============display exception 20=============== ======================================================== … … ==============================================================
98 ● display environment 3Com Router 5000 Family and Router 6000 Family Command Reference display environment Purpose Use the display environment command to view the current values and the thresholds of the hardware system environment. Syntax display environment Parameters None Example Display the system environment.
3Com Router 5000 Family and Router 6000 Family Command Reference display fcm ● 99 display fcm Purpose Use the display fcm command to display the count of dial-up negotiation failures and the count of disconnections upon transaction timeouts for FCM module interfaces. Syntax display fcm Parameters None Example Display the count of dial-up negotiation failures and the count of disconnections upon transaction timeouts for FCM interfaces.
100 ● display ftp-server 3Com Router 5000 Family and Router 6000 Family Command Reference display ftp-server Purpose Use the display ftp-server command to view the parameters of the current FTP server. Syntax display ftp-server Parameters None Example Display the configured FTP server parameters.
3Com Router 5000 Family and Router 6000 Family Command Reference display ftp-server source-ip ● 101 display ftp-server source-ip Purpose Use the display ftp-server source-ip command to display the source IP address configured for the FTP server. Syntax display ftp-server source-ip Parameters None Example Display the current source IP address of the FTP server. display ftp-server source-ip The source IP specified is 0.0.0.
102 ● display ftp-user 3Com Router 5000 Family and Router 6000 Family Command Reference display ftp-user Purpose Use the display ftp-user command to view the parameters of the current FTP users. Syntax display ftp-user Parameters None Example Display the settings of the FTP users. <3Com> display ftp-user UsernameHostIPportIdle HomeDir 3Com 10.110.3.510742 flash:/3Com The information indicates that a connection is present between FTP user 3Com and the FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference display ftp source-ip ● 103 display ftp source-ip Purpose Use the display ftp source-ip command to display the source IP address configured for the FTP client. Syntax display ftp source-ip Parameters None Example Display the current source IP address of the FTP client. display ftp source-ip The source IP specified is 0.0.0.
104 ● display hwping 3Com Router 5000 Family and Router 6000 Family Command Reference display hwping Purpose Use the display hwping command, you can view test result(s). Syntax display hwping { result | history | jitter } [ administrator-name operation-tag ] Parameters result Displays the test result. history Displays the test history. jitter Displays the jitter test information. administrator-name Name of the administrator creating the test. operation-tag Test operation tag.
3Com Router 5000 Family and Router 6000 Family Command Reference display hwping ● 105 Display the test history. [router-hwping-administrator-icmp] display hwping history administrator icmp HWPing entry(admin administrator, tag icmp) history record: Index Response Status LasrRC Time 1 1 1 0 2004-11-25 16:28:55.0 2 1 1 0 2004-11-25 16:28:55.0 3 1 1 0 2004-11-25 16:28:55.0 4 1 1 0 2004-11-25 16:28:55.0 5 1 1 0 2004-11-25 16:28:55.0 6 2 1 0 2004-11-25 16:28:55.0 7 1 1 0 2004-11-25 16:28:55.
106 ● display hwping statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display hwping statistics Purpose Use the display hwping statistics command to view test statistics. Syntax display hwping statistics [ administrator-name Parameters administrator-name Name of the administrator creating the test. operation-tag Test operation tag. Example operation- tag ] Display the statistics information for admin jitter test group, the test type of which is jitter.
3Com Router 5000 Family and Router 6000 Family Command Reference display hwping statistics ● 107 Table 14 Description on the fields in the output of the display hwping statistic command View Field Description Min/Max/Average Round Trip Time Roundtrip time in its minimum, maximum, and average Square-Sum of Round Trip Time The square sum of roundtrip time Packet lost in test The number of lost packets in a test Disconnect operation number The number of forcible disconnections performed by the opp
108 ● display info-center 3Com Router 5000 Family and Router 6000 Family Command Reference display info-center Purpose Use the display info-center command to view all the information recorded in the info-center. Syntax display info-center Parameters None Example Display the information recorded in the info-center.
3Com Router 5000 Family and Router 6000 Family Command Reference display info-center ● 109 Table 15 Description on the fields of the display info-center command (continued) Field Description Trap buffer: enabled max buffer size: 1024 current buffer size: 256 Information about the trap buffer, including its state, maximum size, current size, current messages, channel number, channel name, dropped messages, and overwritten messages current messages: 0 channel number: 3 channel name: trapbuffer dropped m
110 ● display ip netstream export 3Com Router 5000 Family and Router 6000 Family Command Reference display ip netstream export Purpose Use the display ip netstream export command to view statistics about exported NetStream UDP packets. Syntax display ip netstream export Parameters None Example Display statistics about NetStream UDP packets. display ip netstream export Version 5 export information: Stream destination IP(UDP): 10.10.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip netstream cache ● 111 display ip netstream cache Purpose Use the display ip netstream cache command to view configuration and status information about the NetStream cache. Syntax display ip netstream cache Parameters None Example Display information about the NetStream cache.
112 ● display ip netstream cache 3Com Router 5000 Family and Router 6000 Family Command Reference Table 17 Description on the fields of the display ip netstream cache command (continued) View Field Description Total Streams Total number of data streams Packets/Sec Average number of packets per second Stream/Sec Average number of streams per second Packets/stream Number of packets per stream Active(sec) /stream Average active time of each stream Idle(sec) /stream Average inactive time of eac
3Com Router 5000 Family and Router 6000 Family Command Reference display logbuffer ● 113 display logbuffer Purpose Use the display logbuffer command to view the information recorded in the log buffer. Syntax display logbuffer [ size size-value | summary ] [ level level-number ] [ | [ begin | include | exclude ] string ] Parameters size Specifies the number of to-be-displayed entries in the logbuffer. size-value The number of entries to be displayed. summary A summary for the logbuffer.
114 ● display logbuffer 3Com Router 5000 Family and Router 6000 Family Command Reference %Dec 3 09:04:38:772 command:interfac e Aux0 %Dec 3 09:04:38:825 command:interfac e Ethernet0/0 %Dec 3 09:04:38:837 command:interfac e Serial0/0 %Dec 3 09:04:38:861 command:interfac e Serial1/0 %Dec 3 09:04:38:887 command:interfac e Serial1/1 2004 r2 SHELL/5/CMD:task:CFM ip:** user:** 2004 r2 SHELL/5/CMD:task:CFM ip:** user:** 2004 r2 SHELL/5/CMD:task:CFM ip:** user:** 2004 r2 SHELL/5/CMD:task:CFM ip:** user:** 200
3Com Router 5000 Family and Router 6000 Family Command Reference display logbuffer summary ● 115 display logbuffer summary Purpose Use the display logbuffer summary command to display a summary about the log buffer on the router. Syntax display logbuffer summary [ level severity ] Parameters level severity Information level. Valid values are 1 to 8, as described below.
116 ● display ntp-service sessions 3Com Router 5000 Family and Router 6000 Family Command Reference display ntp-service sessions Purpose Use the display ntp-service sessions command to view brief information about all sessions maintained by the NTP at the local device. Use the display ntp-service sessions verbose command to view details about all sessions maintained by the NTP at the local device.
3Com Router 5000 Family and Router 6000 Family Command Reference display ntp-service status ● 117 display ntp-service status Purpose Use the display ntp-service status command to view status about the NTP service. Syntax display ntp-service status Parameters None Example <3Com> display ntp-service status clock status: unsynchronized clock stratum: 16 reference clock ID: none nominal frequency: 100.0000 Hz actual frequency: 100.0000 Hz clock precision: 2^18 clock offset: 0.0000 ms root delay: 0.
118 ● display ntp-service trace 3Com Router 5000 Family and Router 6000 Family Command Reference display ntp-service trace Purpose Use the display ntp-service trace command to view the summary about each NTP time server from the local device back to the reference clock source. Syntax display ntp-service trace Parameters None Example <3Com> display ntp-service server4: stratum 4, offset server3: stratum 3, offset server2: stratum 2, offset server1: stratum 1, offset ’GPS Reciever’ trace 0.
3Com Router 5000 Family and Router 6000 Family Command Reference display pos-app ● 119 display pos-app Purpose Use the display pos-app command to display brief information about POS applications. Syntax display pos-app Parameters None Example Display brief information about POS applications.
120 ● display pos-interface 3Com Router 5000 Family and Router 6000 Family Command Reference display pos-interface Purpose Use the display pos-interface command to display brief information about POS access ports. Syntax display pos-interface Parameters None Example Display brief information about POS interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display rmon alarm ● 121 display rmon alarm Purpose Use the display rmon alarm command to display the alarm table of remote monitoring (RMON) or the specified alarm entry. Syntax display rmon alarm [ alarm-entry ] Parameters alarm-entry Example Display the alarm table of RMON. Alarm index. <3Com> display rmon alarm Alarm table 1 owned by HUAWEI is VALID. Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1
122 ● display rmon event 3Com Router 5000 Family and Router 6000 Family Command Reference display rmon event Purpose Use the display rmon event command to display the event table of RMON or the specified event entry. Syntax display rmon event [ event-entry ] Parameters event-entry Example Display the event table of RMON. Event index. <3Com> display rmon event Event table 1 owned by null is VALID. Description: null. Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
3Com Router 5000 Family and Router 6000 Family Command Reference display rmon eventlog ● 123 display rmon eventlog Purpose Use the display rmon eventlog command to display the log table of RMON or the log entry for the specified event. Syntax display rmon eventlog [ event-entry ] Parameters event-entry Example Display the log entry for event entry 1. Event index. <3Com> display rmon eventlog 1 Event table 1 owned by null is VALID. Generates eventLog 1.1 at 0days 00h:01m:39s. Description: The 1.3.
124 ● display rmon history 3Com Router 5000 Family and Router 6000 Family Command Reference display rmon history Purpose Use the display rmon history command to display the history control table of RMOM and information about the latest sampling, such as utilization, number of errors and total number of packets. Syntax display rmon history [ interface-type interface-number ] Parameters interface-type interface-number Example Interface type and number.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Related Command Any view rmon history display rmon history ● 125
126 ● display rmon prialarm 3Com Router 5000 Family and Router 6000 Family Command Reference display rmon prialarm Purpose Use the display rmon prialarm command to display information about the prialarm table of RMON or the specified prialarm entry. Syntax display rmon prialarm [ prialarm-entry ] Parameters prialarm-entry Example Display information about the prialarm table of RMON. Prialarm entry index. <3Com> display rmon prialarm Prialarm table 1 owned by null is VALID.
3Com Router 5000 Family and Router 6000 Family Command Reference display rmon statistics ● 127 display rmon statistics Purpose Use the display rmon statistics command to display the RMON statistics about the specified or all interfaces. Syntax display rmon statistics [interface-type interface-number ] Parameters interface-type interface-number Example Interface type and number. Display the RMON statistics about interface Ethernet 2/0/1.
128 ● display rsa local-key-pair public 3Com Router 5000 Family and Router 6000 Family Command Reference display rsa local-key-pair public Purpose Use the display rsa local-key-pair public command to view the public key of the host key pair and server key pair on the server. If no key is generated, the system displays: RSA keys not found. Syntax display rsa local-key-pair public Parameters None Example Display the public key of the host key pair and server key pair on the server.
3Com Router 5000 Family and Router 6000 Family Command Reference display rsa peer-public-key ● 129 display rsa peer-public-key Purpose Use the display rsa peer-public-key command to view the specified RSA public key. If no public key specified, all public keys are displayed. Syntax display rsa peer-public-key [ brief | name keyname ] Parameters brief Displays the brief information about all peer public keys. keyname Specifies the key to be displayed.
130 ● display saved-configuration 3Com Router 5000 Family and Router 6000 Family Command Reference display saved-configuration Purpose Use the display saved-configuration command to view the configuration file loaded at this startup. Syntax display saved-configuration [ by-linenum ] Parameters by-linenum Example Display the configuration file loaded at this startup. Identifies each line of displayed information with a line number.
3Com Router 5000 Family and Router 6000 Family Command Reference 13: 14: 15: 16: 17: 18: 19: 20: 21: 22: 23: 24: View Related Commands interface Ethernet0/0/0 # interface Serial0/0/0 link-protocol ppp # interface NULL0 # user-interface con 0 user-interface aux 0 user-interface vty 0 4 # return This command can be used in the following views: ■ Any view ■ save ■ reset saved-configuration ■ display current-configuration display saved-configuration ● 131
132 ● display schedule reboot 3Com Router 5000 Family and Router 6000 Family Command Reference display schedule reboot Purpose Use the display schedule reboot command to view settings related to the router’s schedule reboot terminal service. Syntax display schedule reboot Parameters None Example Display the current settings related to the schedule reboot terminal service.
3Com Router 5000 Family and Router 6000 Family Command Reference display sftp source-ip ● 133 display sftp source-ip Purpose Use the display sftp source-ip command to display the source IP address configured for the SFTP client. Syntax display sftp source-ip Parameters None Example Display the current source IP address of the SFTP client. display sftp source-ip The source IP specified is 0.0.0.
134 ● display snmp-agent 3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent Purpose Use the display snmp-agent command to view the engine ID of the local or remote SNMP entity. Syntax display snmp-agent { local-engineid | remote-engineid } Parameters local-engineid Engine ID of the local SNMP entity. remote-engineid Engine ID of the remote SNMP entity. Example Display the engine ID of the local device.
3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent community ● 135 display snmp-agent community Purpose Use the display snmp-agent community command to view information on the configured communities of SNMPv1 or SNMPv2. Syntax display snmp-agent community [ read | write ] Parameters read Displays information on the read-only community. write Displays information on the read-write community. Example Display information on the configured communities.
136 ● display snmp-agent group 3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent group Purpose Use the display snmp-agent group command to view information about the specified or all user security model (USM) based groups, including group name, security model, storage type. Syntax display snmp-agent group [ group-name ] Parameters group-name Example Display SNMP groups and their security model. Specifies the group name of the SNMP information to be displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent mib-view ● 137 display snmp-agent mib-view Purpose Use the display snmp-agent mib-view command to view the configured MIB views. Syntax display snmp-agent mib-view [ exclude | include | viewname view-name ] Parameters exclude Excludes the SNMP MIB view attributes displayed and set. include Includes the SNMP MIB view attributes displayed and set. viewname Specifies the name of the view to be displayed.
138 ● display snmp-agent mib-view 3Com Router 5000 Family and Router 6000 Family Command Reference The following table describes the output fields. Table 30 Description on the fields of the display snmp-agent mib-view command View Field Description View name View name MIB Subtree MIB subtree Subtree mask MIB subtree mask Storage-type Storage type ViewType: Included/excluded Indicates that the access to a MIB object is allowed or prohibited. Active Indicates the state of lines in the table.
3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent statistics ● 139 display snmp-agent statistics Purpose Use the display snmp-agent statistics command to view the state and statistics about SNMP. Syntax display snmp-agent statistics Parameters None Example Check the statistics about SNMP communication.
140 ● display snmp-agent statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Table 31 Description on the fields of the display snmp-agent statistics command (continued) Field Description 0 SNMP PDUs which had noSuchName Number of SNMP PDUs with noSuchName error is 0 error-status 0 SNMP PDUs which had tooBig error-status (Maximum packet size 500) Number of SNMP PDUs with tooBig error is 0 (maximum packet size is 500 bytes) 0 MIB objects retrieved successfully Number of retrieve
3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent sys-info ● 141 display snmp-agent sys-info Purpose Use the display snmp-agent sys-info command to view the system information of this SNMP device. Syntax display snmp-agent sys-info [ contact | location | version ]* Parameters contact Displays the contact information of this node. location Displays the physical location information of this node. version Displays the SNMP version running in this agent.
142 ● display snmp-agent trap-list 3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent trap-list Purpose Use the display snmp-agent trap-list command to display whether trap sending is enabled on each module. Syntax display snmp-agent trap-list Parameters None Example Display whether trap sending is enabled on each module.
3Com Router 5000 Family and Router 6000 Family Command Reference display snmp-agent usm-user ● 143 display snmp-agent usm-user Purpose Use the display snmp-agent usm-user command to view information about the specified or all SNMP users. Syntax display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ] * Parameters engineid Displays information about the SNMPv3 users with the specified engine ID. engineid-string Character string of the engine ID.
144 ● display ssh server 3Com Router 5000 Family and Router 6000 Family Command Reference display ssh server Purpose Use the display ssh server command to view information on SSH status or sessions. Syntax display ssh server { status | session } Parameters status Displays SSH status information. session Displays SSH session information. Example Display SSH status and configuration parameters. [3Com]display ssh server status SSH version : 1.
3Com Router 5000 Family and Router 6000 Family Command Reference display ssh-server source-ip ● 145 display ssh-server source-ip Purpose Use the display ssh-server source-ip command to display the source IP address configured for the SSH server. Syntax display ssh-server source-ip Parameters None Example Display the current source IP address of the SSH server. display ssh-server source-ip The source IP specified is 0.0.0.
146 ● display ssh user-information 3Com Router 5000 Family and Router 6000 Family Command Reference display ssh user-information Purpose Use the display ssh user-information command to view information about current SSH users, including user name, corresponding key name and user authentication mode. If you specify the username parameter, then only the information about the specified user is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display ssh server-info ● 147 display ssh server-info Purpose Use the display ssh server-info command to view the associations of public key to SSH server maintained at the client end. Syntax display ssh server-info Parameters None Example Display the public key to SSH server associations at the client end. [3Com] display ServerIP 192.168.0.1 192.168.0.
148 ● display ssh2 source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference display ssh2 source-ip Purpose Use the display ssh2 source-ip command to display the source IP address configured for the SSH client. Syntax display ssh2 source-ip Parameters None Example Display the current source IP address of the SSH client.
3Com Router 5000 Family and Router 6000 Family Command Reference display startup ● 149 display startup Purpose Use the display startup command to view the configuration file used at this startup and the one used for next startup. Syntax display startup Parameters None Example Display the configuration file used at this startup and the one used for next startup.
150 ● display tcp status 3Com Router 5000 Family and Router 6000 Family Command Reference display tcp status Purpose Use the display tcp status command to view information about the current TCP connections on the router. Syntax display tcp status Parameters None Example Display information about TCP connections. <3Com> display tcp status TCPCB Local Address 129.102.100.142 23 028ca414 0.0.0.0.23 Foreign Address 129.102.001.092 0.0.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display telnet-server source-ip ● 151 display telnet-server source-ip Purpose Use the display telnet-server source-ip command to display the source IP address configured for the Telnet server. Syntax display telnet-server source-ip Parameters None Example Display the current source IP address of the Telnet server. display telnet-server source-ip The source IP specified is 0.0.0.
152 ● display user-interface 3Com Router 5000 Family and Router 6000 Family Command Reference display user-interface Purpose Use the display user-interface command to view information about the specified or all user interfaces. Syntax display user-interface [ type-name ] [ number ] [summary] Parameters type-name User interface type. Together with a user interface index, it specifies a user interface. number Number of a user interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display users ● 153 display users Purpose Use the display users command to view the login information of the users on each user interface. Syntax display users [ all ] Parameters all Example Display state about all user interface users. Displays information about users of all user interfaces. <3Com> display users UI Delay Type Ipaddress Username Userlevel + 0 CON 0 00:00:00 3 130 VTY 0 00:00:05 TEL 192.168.1.
154 ● display tftp-server 3Com Router 5000 Family and Router 6000 Family Command Reference display tftp-server Purpose Use the display tftp-server command to view TFTP server state and attributes setting. Syntax display tftp-server Parameters None Example Display TFTP server state and attributes setting.
3Com Router 5000 Family and Router 6000 Family Command Reference display tftp source-ip ● 155 display tftp source-ip Purpose Use the display tftp source-ip command to display the source IP address configured for the TFTP client. Syntax display tftp source-ip Parameters None Example Display the current source IP address of the TFTP client. display tftp source-ip The source IP specified is 0.0.0.
156 ● display this 3Com Router 5000 Family and Router 6000 Family Command Reference display this Purpose Use the display this command to view the current configurations in current view. Syntax display this [ by-linenum ] Parameters by-linenum Example Display the current configuration in current view. Identifies each line of displayed information with a line number.
3Com Router 5000 Family and Router 6000 Family Command Reference display trapbuffer ● 157 display trapbuffer Purpose Use the display trapbuffer command to view the information entries in the trap buffer. Syntax display trapbuffer [ size sizeval ] Parameters size Specifies the number of information entries in the trap buffer. sizeval Number of entries to be displayed. Default By default, the command is executed without any parameter specified to display all information in the trap buffer.
158 ● display trapbuffer View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Related Commands Any view If the number of entries in the current trap buffer is smaller than the specified sizeval, all entries are displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference enable Purpose Use the enable command to enable current aggregation mode. Use the undo enable command to disable current aggregation mode. Syntax enable undo enable Parameters None Example Enable NetStream AS aggregation.
160 ● escape-key 3Com Router 5000 Family and Router 6000 Family Command Reference escape-key Purpose Use the escape-key command to define an escape key or key combination for aborting tasks. Use the undo escape-key command to delete the escape key or key combination used to abort tasks.
3Com Router 5000 Family and Router 6000 Family Command Reference execute ● 161 execute Purpose Use the execute command to execute the specified batch file. Syntax execute filename Parameters filename Example Execute the batch file “test.bat” in the flash:/ directory. Name of a batch file (including the path) with a .bat extension. Valid values are 1 to 256. [3Com] execute test.
162 ● exit 3Com Router 5000 Family and Router 6000 Family Command Reference exit Purpose Use the exit command to terminate the connection to the remote SFTP server and exit to system view as you would with the bye and quit commands. Syntax exit Parameters None Example Terminate the connection to the remote SFTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference file prompt ● 163 file prompt Purpose Use the file prompt command to enable or disable the router to warn when an operation may result in data loss or corruption. Syntax file prompt {alert | quiet } Parameters alert Enables interactive acknowledgement when a user operation, deleting a file for example, may result in data loss or corruption.
164 ● filename 3Com Router 5000 Family and Router 6000 Family Command Reference filename Purpose Use the filename command to configure the name of the file to be gotten from or put onto an FTP server. Use the undo filename command to cancel the configuration of the file name. Syntax filename file-name undo filename Parameters file-name Default By default, no file name is configured. Example Specify the file to be gotten from or put onto an FTP server by specifying its name “config.txt".
3Com Router 5000 Family and Router 6000 Family Command Reference fixdisk ● 165 fixdisk Purpose Use the fixdisk command to restore the space of a storage device when it becomes unavailable because of some abnormal operation. Syntax fixdisk device-name Parameters device Example Restore the space of the Flash. Device name. <3Com> fixdisk flash: Restore the space of the CF card.
166 ● flow-control 3Com Router 5000 Family and Router 6000 Family Command Reference flow-control Purpose Use the flow-control command to configure flow control mode. Use the undo flow-control command to restore the default. Syntax flow-control { hardware | software | none } undo flow-control Parameters none No flow control. software Software flow control. hardware Hardware flow control , only valid on console and AUX ports. Default By default, TTY interfaces use hardware flow control.
3Com Router 5000 Family and Router 6000 Family Command Reference format ● 167 format Purpose Use the format command to format a storage device. Syntax format device-name Parameters device-name Example Format the Flash memory. Device name. <3Com> format flash: All data on flash: will be lost, proceed with format? [Y/N]: Format flash: completed Format the CF card.
168 ● free user-interface 3Com Router 5000 Family and Router 6000 Family Command Reference free user-interface Purpose Use the free user-interface number command to disconnect the user corresponding to the user interface specified by its absolute index. Use the free user-interface type-name number command to disconnect the user corresponding to the user interface specified by its type and relative index. Syntax free user-interface [ type-name ] number Parameters type-name User interface type.
3Com Router 5000 Family and Router 6000 Family Command Reference frequency ● 169 frequency Purpose Use the frequency command to configure an automatic test interval. Use the undo frequency command to restore the default value. Syntax frequency interval undo frequency Parameters interval Example Set the automatic test interval to 10 seconds. Automatic test interval (in seconds). Valid values are 0 to 65535. If no value is specified, the default is 0, meaning no automatic test.
170 ● ftp 3Com Router 5000 Family and Router 6000 Family Command Reference ftp Purpose Use the ftp command to set up control connection to the remote FTP server and enter FTP client view. Syntax ftp [host [ port ] ] [ source-interface interface-type interface-number | source-ip ip-address ] Parameters host IP address or hostname of the remote FTP server. port Port number of the remote FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference ftp-operation ● 171 ftp-operation Purpose Use the ftp-operation command to configure the FTP operation done by the system. Syntax ftp-operation { get | put } Parameters get Gets a file from an FTP server. If no other FTP operation is specified, get is the default. put Sends a file to an FTP server. Example Set the FTP operation to get.
172 ● ftp server enable 3Com Router 5000 Family and Router 6000 Family Command Reference ftp server enable Purpose Use the ftp server enable command to enable the FTP server to allow login of FTP users. Use the undo ftp server command to disable the FTP server as well as login of FTP users. Syntax ftp server enable undo ftp server Parameters None Default By default, the FTP server is disabled. Example Disable the FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference ftp-server source-interface ● 173 ftp-server source-interface Purpose Use the ftp-server source-interface command to specify a source interface, which must be an existing local interface, for the FTP server. Use the undo ftp-server source-interface command to delete the source interface specified for the FTP server.
174 ● ftp-server source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference ftp-server source-ip Purpose Use the ftp-server source-ip command to specify a source IP address for the packets sent by the FTP server. This IP address must be a local IP address. Use the undo ftp-server source-ip command to delete the source IP address specified for the FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference ftp source-interface ● 175 ftp source-interface Purpose Use the ftp source-interface command to specify a source interface, which must be an existing local interface, for the FTP client. After that, the IP address of the specified interface is used as the source IP address in each packet sent by the FTP client. Use the undo ftp source-interface command to delete the source interface specified for the FTP client.
176 ● ftp source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference ftp source-ip Purpose Use the ftp source-ip command to specify a source IP address for the packets sent by the FTP client. This IP address must be a local IP address. Use the undo ftp source-ip command to delete the source IP address specified for the FTP client. After that, the source IP address of each packet sent by the FTP client is the IP address of the interface where the packet is sent out.
3Com Router 5000 Family and Router 6000 Family Command Reference ftp timeout ● 177 ftp timeout Purpose Use the ftp timeout command to set the idle-timeout timer. Use the undo ftp timeout command to restore the default. Syntax ftp timeout minutes undo ftp timeout Parameters minutes Example Set the idle-timeout timer to 36 minutes. Idle-timeout timer (in minutes). Valid values are 1 to 35791. If no value is specified, the default is 30 minutes.
178 ● ftp update 3Com Router 5000 Family and Router 6000 Family Command Reference ftp update Purpose Use the ftp update command to set the file update mode that the FTP server uses while receiving data. Use the undo ftp update command to restore the default, or fast mode. Syntax ftp update { fast | normal } undo ftp update Parameters Example fast Fast update. normal Normal update. Set the FTP update mode to normal.
3Com Router 5000 Family and Router 6000 Family Command Reference ftphost source-interface ● 179 ftphost source-interface Purpose Use the ftp host source-interface command to specify the source interface that the FTP client uses when accessing the specified FTP server. This interface must be an exiting local interface. Syntax ftp host source-interface interface-type interface-number Parameters host IP address or name of an FTP server.
180 ● ftphost source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference ftphost source-ip Purpose Use the ftp host source-ip command to specify the source IP address that the FTP client uses when accessing the specified FTP server. Syntax ftp host source-ip ip-address Parameters host IP address or name of an FTP server. ip-address Source IP address. Default By default, the FTP client uses the IP address of the outbound interface to access the specified FTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference get ● 181 get Purpose Use the get command to FTP a file from a remote server and save it. Syntax get remotefile [ localfile ] Parameters localfile Local file name. remotefile File name on the remote FTP server. Default By default, if no name is specified, the local file uses the name of the source file on the FTP server. Example Download file temp1.c and save it as temp.c. [ftp] get temp1.c temp.
182 ● get 3Com Router 5000 Family and Router 6000 Family Command Reference get Purpose Use the get command to download and save a file from a remote server. Syntax get remote-file [ local-file ] Parameters remote-file Name of the source file on the remote SFTP server. local-file Name assigned to the file to be saved at the local end. Example Download file temp1.c and save it with name temp.c. sftp-client> get temp1.c temp.
3Com Router 5000 Family and Router 6000 Family Command Reference help ● 183 help Purpose Use the help command to get the help information for the specified or all SFTP client commands. Syntax help [ command ] Parameters command Example View the help information for the get command. Name of a command.
184 ● history-command max-size 3Com Router 5000 Family and Router 6000 Family Command Reference history-command max-size Purpose Use the history-command max-size command to set the size of history command buffer. Use the undo history-command max-size command to restore the default. Syntax history-command max-size size-value undo history-command max-size Parameters size-value Example Set the size of the history command buffer to 20. History buffer size. Valid values are 0 to 256.
3Com Router 5000 Family and Router 6000 Family Command Reference history keep-time ● 185 history keep-time Purpose Use the history keep-time command to configure the retaining time of the history record for a test group. Use the undo history keep-time command to remove the original configuration and restore the default. Syntax history keep-time keep-time undo history keep-time Parameters keep-time Example The history record will be deleted in 240 minutes.
186 ● history-record 3Com Router 5000 Family and Router 6000 Family Command Reference history-record Purpose Use the history-record enable command to enable history record. Use the undo history-record enable command to disable history record. Syntax history-record enable undo history-record enable Parameters None Example Enable history record saving.
3Com Router 5000 Family and Router 6000 Family Command Reference history-records ● 187 history-records Purpose Use the history-records command to configure the number of test results that the system can retain. Use the undo history-records command to restore the default. Syntax history-records number undo history-records Parameters number Example Set the number of retained history records concerning the current test group to 10. Number of test results allowed to be retained.
188 ● http-operation 3Com Router 5000 Family and Router 6000 Family Command Reference http-operation Purpose Use the http-operation command to configure an HTTP operation type. Syntax http-operation { get | post } Parameters get Obtains data from an HTTP server. If no other operation is specified, get is the default. post Sends data to an HTTP server. Example Set the HTTP test operation type to get.
3Com Router 5000 Family and Router 6000 Family Command Reference hwping ● 189 hwping Purpose Use the hwping command to create an HWPing test group. Syntax hwping administrator-name operation-tag undo hwping administrator-name operation-tag Parameters Example administrator-name Specifies name of the administrator creating an HWPing test group. operation-tag Test operation tag. Create an HWPing test group, where the administrator name is administrator and the test operation tag is icmp.
190 ● hwping-agent enable 3Com Router 5000 Family and Router 6000 Family Command Reference hwping-agent enable Purpose Use the hwping-agent enable command to enable the HWPing client function. Use the undo hwping-agent enable command to disable the HWPing client function. Syntax hwping-agent enable undo hwping-agent enable Parameters None Example Enable HWPing Client.
3Com Router 5000 Family and Router 6000 Family Command Reference hwping-agent max-requests ● 191 hwping-agent max-requests Purpose Use the hwping-agent max-requests command to set the allowed maximum number of concurrent tests. Use the undo hwping-agent max-requests command to restore the default maximum number of concurrent tests. Syntax hwping-agent max-requests max-number undo hwping-agent max-requests Parameters max-number Example Set the maximum number of concurrent tests to 4.
192 ● hwping-server enable 3Com Router 5000 Family and Router 6000 Family Command Reference hwping-server enable Purpose Use the hwping-server enable command to enable HWPing Server. Use the undo hwping-server enable command to disable HWPing Server. Syntax hwping-server enable undo hwping-server enable Parameters None Default By default, HWPing Server is disabled. Example Enable HWPing Server.
3Com Router 5000 Family and Router 6000 Family Command Reference hwping-server tcpconnect ● 193 hwping-server tcpconnect Purpose Use the hwping-server tcpconnect command to create a TCP listening service. Use the undo hwping-server tcpconnect command to delete the established TCP listening service.
194 ● hwping-server udpecho 3Com Router 5000 Family and Router 6000 Family Command Reference hwping-server udpecho Purpose Use the hwping-server udpecho command to create a UDP listening service. Use the undo hwping-server udpecho command to delete the established UDP listening service. Syntax hwping-server udpecho ip-address port-number undo hwping-server udpecho ip-address port-number Parameters Example ip-address IP address where HWPing server provides the UDP listening service.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center channel ● 195 info-center channel Purpose Use the info-center channel command to assign a name to the information channel specified by channel-number. Syntax info-center channel channel-number name channel-name Parameters channel-number Channel number. Valid values are 0 to 9. (The system has 10 channels.) channel-name A string of up to 30 characters excluding minus signs (-), forward slashes (/) and backslashes (\).
196 ● info-center console channel 3Com Router 5000 Family and Router 6000 Family Command Reference info-center console channel Purpose Use the info-center console channel command to have the info-center output information to the console over the specified channel. Use the undo info-center console channel command to disable the current settings. Syntax info-center console channel { channel-number | channel-name } undo info-center console channel Parameters channel-number Channel number.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center enable ● 197 info-center enable Purpose Use the info-center enable command to enable the info-center. Use the undo info-center enable command to disable the info-center. Syntax info-center enable undo info-center enable Parameters None Default By default, the info-center is enabled. Example Enable the info-center.
198 ● info-center logbuffer 3Com Router 5000 Family and Router 6000 Family Command Reference info-center logbuffer Purpose Use the info-center logbuffer command to enable the log buffer and specify the channel for system information output as well as the size of the log buffer. Use the undo info-center logbuffer command to cancel the current settings.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center logfile ● 199 info-center logfile Purpose Use the info-center logfile channel command to have the info-center output system information to the log file. Use the undo info-center logfile channel command to cancel the current setting.
200 ● info-center loghost 3Com Router 5000 Family and Router 6000 Family Command Reference info-center loghost Purpose Use the info-center loghost command to have the info-center output information to the log host. Use the undo info-center loghost command to cancel the current setting. Syntax info-center loghost X.X.X.X [ channel { channel-number | channel-name } | facility local-number | language { chinese | english } ] * undo info-center loghost X.X.X.X Parameters X.X.X.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ info-center enable ■ display info-center info-center loghost ● 201
202 ● info-center loghost source 3Com Router 5000 Family and Router 6000 Family Command Reference info-center loghost source Purpose Use the info-center loghost source command to specify the source address in the packets destined to the log host. Use the undo info-center loghost source command to cancel the current configuration. Syntax info-center loghost source interface-type interface-number [ subinterface-type ] undo info-center loghost source Parameters Example interface-type Interface type.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center monitor channel ● 203 info-center monitor channel Purpose Use the info-center monitor channel command to have the info-center output information over the specified channel to the user terminal. Use the undo info-center monitor channel command to cancel the current setting. Syntax info-center monitor channel { channel-number | channel-name } undo info-center monitor channel Parameters channel-number Channel number.
204 ● info-center snmp channel 3Com Router 5000 Family and Router 6000 Family Command Reference info-center snmp channel Purpose Use the info-center snmp channel command to set the information channel for SNMP. Use the undo info-center snmp channel command to cancel the current setting. Syntax info-center snmp channel { channel-number | channel-name } undo info-center snmp channel Parameters Example channel-number Channel number. Valid values are 0 to 9. (The system has 10 channels.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center source ● 205 info-center source Purpose Use the info-center source command to add records to an information channel. Use the undo info-center source command to remove the records from the information channel.
206 ● info-center source Example 3Com Router 5000 Family and Router 6000 Family Command Reference Output IP module’s log information at emergencies and lower levels through the SNMP channel. [3Com] info-center source ip channel snmpagent log level emergencies Remove the setting of the CMD module in the SNMP channel.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center synchronous ● 207 info-center synchronous Purpose Use the info-center synchronous command to enable synchronous terminal output. Use the undo info-center synchronous command to disable synchronous terminal output. Syntax info-center synchronous undo info-center synchronous Parameters None Default By default, synchronous terminal output is disabled. Example Enable synchronous terminal output.
208 ● info-center timestamp 3Com Router 5000 Family and Router 6000 Family Command Reference info-center timestamp Purpose Use the info-center timestamp command to set a time stamp format for the system information output to the information channels except for the log host. Use the undo info-center timestamp command to cancel the current configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference info-center timestamp loghost ● 209 info-center timestamp loghost Purpose Use the info-center timestamp loghost command to set a time stamp format for the system information output to the log host. Use the undo info-center timestamp loghost command to restore the default.
210 ● info-center trapbuffer 3Com Router 5000 Family and Router 6000 Family Command Reference info-center trapbuffer Purpose Use the info-center trapbuffer command to enable the trap buffer, set its size and the channel that outputs information to it. Use the undo info-center trapbuffer command to cancel the current settings.
3Com Router 5000 Family and Router 6000 Family Command Reference idle-timeout ● 211 idle-timeout Purpose Use the idle-timeout command to set the idle-timeout timer. When it expires, the user connection is disconnected. Use the undo idle-timeout command to restore the default. Syntax idle-timeout minutes [ seconds ] undo idle-timeout Parameters minutes Number of minutes. Valid values are 0 to 35791. seconds Number of seconds. Valid values are 0 to 59.
212 ● ip df-check enable 3Com Router 5000 Family and Router 6000 Family Command Reference ip df-check enable Purpose Use the ip df-check enable command to enable don’t fragment bit (DF-bit) check for IP packets. Use the undo ip df-check enable command to disable DF-bit check for IP packets. Syntax ip df-check enable undo ip df-check enable Parameters None Default By default, DF-bit check is enabled for IP packets. Example Enable DF-bit check for IP packets.
3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream { inbound | outbound } ● 213 ip netstream { inbound | outbound } Purpose Use the ip netstream { inbound | outbound } command to enable NetStream statistics in the inbound or outbound direction of the interface. Use the undo ip netstream { inbound | outbound } command to disable Netstream statistics in the inbound or outbound direction of the interface.
214 ● ip netstream aggregation 3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream aggregation Purpose Use the ip netstream aggregation command to enter NetStream aggregation view. Syntax ip netstream aggregation { as | protocol-port | source-prefix | destination-prefix | prefix } Parameters as AS aggregation by combination of source AS number, destination AS number, inbound interface index, and outbound interface index.
3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream export host ● 215 ip netstream export host Purpose Use the ip netstream export host command to set the destination IP address and UDP port number for NetStream UDP packets. Use the undo ip netstream export host command to restore the defaults.
216 ● ip netstream export source 3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream export source Purpose Use the ip netstream export source command to configure a source interface for NetStream UDP packets. Use the undo ip netstream export source command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream export version ● 217 ip netstream export version Purpose Use the ip netstream export version command to configure the type of AS numbers to be recorded in NetStream cache entries and the version of UDP packets. Use the undo ip netstream export version command to restore the defaults.
218 ● ip netstream format no-direction 3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream format no-direction Purpose Use the ip netstream format no-direction command to remove flow direction mark in the header of NetStream log packet. Use the undo ip netstream format no-direction command to configure to mark flow direction in the header of NetStream log packet.
3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream max-entry ● 219 ip netstream max-entry Purpose Use the ip netstream max-entry command to set the NetStream cache size. Use the undo ip netstream max-entry command to restore the default. Syntax ip netstream max-entry max-entries undo ip netstream max-entry Parameters max-entries Default By default, the NetStream cache size is 10,000. Example Set the NetStream cache size to 5000.
220 ● ip netstream timeout active 3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream timeout active Purpose Use the ip netstream timeout active command to set the active aging timer for NetStream cache entries. Use the undo ip netstream timeout active command to restore the default. Syntax ip netstream timeout active minutes undo ip netstream timeout active Parameters minutes Default By default, the active aging timer is set to 30 minutes.
3Com Router 5000 Family and Router 6000 Family Command Reference ip netstream timeout inactive ● 221 ip netstream timeout inactive Purpose Use the ip netstream timeout inactive command to set the inactive aging timer for NetStream cache entries. Use the undo ip netstream timeout inactive command to restore the default. Syntax ip netstream timeout inactive seconds undo ip netstream timeout inactive Parameters seconds Example Set the inactive aging timer to 60 seconds.
222 ● ip option source-routing 3Com Router 5000 Family and Router 6000 Family Command Reference ip option source-routing Purpose Use the ip option source-routing command to enable IP source routing, allowing the router to handle the packets with the IP source-route option. Use the undo ip option source-routing command to disable IP source routing.
3Com Router 5000 Family and Router 6000 Family Command Reference ip route-static detect-group ● 223 ip route-static detect-group Purpose Use the ip route-static detect-group command to configure a static route and reference a detect group. Syntax ip route-static ip-address { mask | mask-length } { interface-type interface-number | nexthop } [ preference preference-value ] detect-group group-number Parameters ip-address Destination IP address of the static route, in the dotted decimal format.
224 ● ip source-address-check 3Com Router 5000 Family and Router 6000 Family Command Reference ip source-address-check Purpose Use the ip source-address-check command to enable source address check function for IP packets. Use the undo ip source-address check command to disable source address check function for IP packets. Syntax ip source-address-check undo ip source-address-check Parameters None Default By default, the source address check function for IP packets is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference jitter-interval ● 225 jitter-interval Purpose Use the jitter-interval command to set a packet sending interval for a jitter test. Use the undo jitter-interval command to restore the default. Syntax jitter-interval interval undo jitter-interval Parameters interval Example Send packets at intervals of 30 milliseconds in a jitter test. Packet sending interval in a jitter test (in milliseconds).
226 ● lcd 3Com Router 5000 Family and Router 6000 Family Command Reference lcd Purpose Use the lcd command to get the local working directory path of the FTP client. Syntax lcd Parameters None Example Display the local working directory path.
3Com Router 5000 Family and Router 6000 Family Command Reference ls ● 227 ls Purpose Use the ls command to query for a specified file/directory. Syntax ls [ remotefile ] [ localfile ] Parameters remotefile Remote file for which you query. localfile Name of the file to be saved at the local. Default By default, all files and directories are displayed if no file is specified. Example Query for file temp.c. [ftp] ls temp.
228 ● ls 3Com Router 5000 Family and Router 6000 Family Command Reference ls Purpose Use the ls command to view the files in the specified directory as you would with the dir command.
3Com Router 5000 Family and Router 6000 Family Command Reference jitter-packetnum ● 229 jitter-packetnum Purpose Use the jitter-packetnum command to configure the number of packets to be sent in a jitter test. Use the undo jitter-packetnum command to restore the default. Syntax jitter-packetnum number undo jitter-packetnum Parameters number Example Send 30 packets in a jitter test. Number of packets to be sent in a jitter test.
230 ● mkdir 3Com Router 5000 Family and Router 6000 Family Command Reference mkdir Purpose Use the mkdir command to create a directory on the remote SFTP server. Syntax mkdir remote-path Parameters remote-path Example Create directory test on the remote SFTP server. Name of a directory on the remote SFTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference mkdir ● 231 mkdir Purpose Use the mkdir command to create a directory under the specified directory on the specified storage device. Syntax mkdir directory Parameters directory Example Create directory dd. Name of directory. <3Com> mkdir dd Created dir flash:/dd. View This command can be used in the following views: ■ Description User view The name of the directory to be created must be unique under the specified directory.
232 ● mkdir 3Com Router 5000 Family and Router 6000 Family Command Reference mkdir Purpose Use the mkdir command to create a directory on the remote FTP server. Syntax mkdir pathname Parameters pathname Example Create the directory test on the remote FTP server. Directory name.
3Com Router 5000 Family and Router 6000 Family Command Reference modem ● 233 modem Purpose Use the modem or modem both command to allow modem calls to pass through, both incoming and outgoing. Use the modem [ call-in | call-out ] command to allow incoming or outgoing modem calls to pass through. Use the undo modem or undo modem both command to disable modem calls to pass through, both incoming and outgoing.
234 ● modem timer answer 3Com Router 5000 Family and Router 6000 Family Command Reference modem timer answer Purpose Use the modem timer answer command to set the timeout time spent waiting for the carrier signal after the off-hook action when setting up an incoming call connection. Use the undo modem timer answer command to restore the default, or 30 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference modem auto-answer ● 235 modem auto-answer Purpose Use the modem auto-answer command to set the answering mode to auto-answer. Use the undo modem auto-answer command to restore the default, or manual answer. Syntax modem auto-answer undo modem auto-answer Parameters None Example Set the answering mode to auto-answer.
236 ● move 3Com Router 5000 Family and Router 6000 Family Command Reference move Purpose Use the move command to move a file. Syntax move filename-source filename-dest Parameters filename-source Name of the source file. filename-dest Name of the target file.
3Com Router 5000 Family and Router 6000 Family Command Reference more ● 237 more Purpose Use the more command, you can view the contents of the specified file. Syntax more filename Parameters filename Default By default, the file system displays files in the form of text, that is, the file contents. Example Display the contents of file test.txt. File name. <3Com> more test.txt AppWizard has created this test application for you.
238 ● ntp-service access 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service access Purpose Use the ntp-service access command to control access to the NTP service on the local device. Use the undo ntp-service access command to cancel the limit on the access right. Syntax ntp-service access { query | synchronization | server | peer } acl-number undo ntp-service access { query | synchronization | server | peer } Parameters query Query right.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service authentication enable ● 239 ntp-service authentication enable Purpose Use the ntp-service authentication enable command to enable NTP service ID authentication. Use the undo ntp-service authentication enable command to disable NTP service ID authentication. Syntax ntp-service authentication enable undo ntp-service authentication enable Parameters None Default By default, ID authentication is disabled.
240 ● ntp-service authentication-keyid 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service authentication-keyid Purpose Use the ntp-service authentication-keyid command to set an NTP authentication key. Use the undo ntp-service authentication-keyid command to cancel the NTP authentication key. Syntax ntp-service authentication-keyid number authentication-mode md5 value undo ntp-service authentication-keyid number Parameters number Key ID. Valid values are 1 to 4294967295.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service broadcast-client ● 241 ntp-service broadcast-client Purpose Use the ntp-service broadcast-client command to configure NTP broadcast client mode. Use the undo ntp-service broadcast-client command to cancel NTP broadcast client mode. Syntax ntp-service broadcast-client undo ntp-service broadcast-client Parameters None Default By default, NTP broadcast client service is not configured.
242 ● ntp-service broadcast-server 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service broadcast-server Purpose Use the ntp-service broadcast-server command to configure NTP broadcast server mode. Use the undo ntp-service broadcast-server command to cancel NTP broadcast server mode. Syntax ntp-service broadcast-server [ authentication-keyid keyid | version number ] * undo ntp-service broadcast-server Parameters authentication-keyid Specifies an ID authentication key.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service max-dynamic-sessions ● 243 ntp-service max-dynamic-sessions Purpose Use the ntp-service max-dynamic-sessions command to set the number of sessions allowed by the local device. Use the undo ntp-service max-dynamic-sessions command to restore the default, or 100.
244 ● ntp-service multicast-client 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service multicast-client Purpose Use the ntp-service multicast-client command to configure NTP multicast client mode. Use the undo ntp-service multicast-client command to cancel NTP multicast client mode. Syntax ntp-service multicast-client [ X.X.X.X ] undo ntp-service multicast-client [ X.X.X.X ] Parameters X.X.X.X Default By default, multicast client service is not configured and X.X.X.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service multicast-server ● 245 ntp-service multicast-server Purpose Use the ntp-service multicast-server command to configure NTP multicast server mode. Use the undo ntp-service multicast-server command to cancel NTP multicast server mode. Syntax ntp-service multicast-server [ X.X.X.X ] [ authentication-keyid keyid | ttl ttl-number | version number ] * undo ntp-service multicast-server [ X.X.X.X ] Parameters X.X.X.
246 ● ntp-service refclock-master 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service refclock-master Purpose Use the ntp-service refclock-master command to set the local clock as the NTP master clock to provide synchronization source. Use the undo ntp-service refclock-master command to remove the setting of the NTP master clock. Syntax ntp-service refclock-master [ X.X.X.X ] [ layers-number ] undo ntp-service refclock-master [ X.X.X.X ] Parameters X.X.X.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service reliable authentication-keyid ● 247 ntp-service reliable authentication-keyid Purpose Use the ntp-service reliable authentication-keyid command to specify a reliable key. Use the undo ntp-service reliable authentication-keyid command to cancel the setting.
248 ● ntp-service source-interface 3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service source-interface Purpose Use the ntp-service source-interface command to specify an interface for the local end to transmit NTP messages. Use the undo ntp-service source-interface command to cancel the setting.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service unicast-peer ● 249 ntp-service unicast-peer Purpose Use the ntp-service unicast-peer command to configure NTP peer mode. Use the undo ntp-service unicast-peer command to cancel the setting. Syntax ntp-service unicast-peer [ vpn-instance vpn-instance-name ] {X.X.X.
250 ● ntp-service unicast-peer View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description System view This command sets the remote server specified by X.X.X.X as the peer of the local device, while the local device is operating in symmetric active mode. X.X.X.X is a host address and cannot be the address of the broadcast, multicast or reference clock.
3Com Router 5000 Family and Router 6000 Family Command Reference ntp-service unicast-server ● 251 ntp-service unicast-server Purpose Use the ntp-service unicast-server command to configure NTP server mode. Use the undo ntp-service unicast-server command to cancel the setting. Syntax ntp-service unicast-server [ vpn-instance vpn-instance-name ] {X.X.X.
252 ● ntp-service unicast-server Description 3Com Router 5000 Family and Router 6000 Family Command Reference This command sets the remote server specified by X.X.X.X or server-name as the local time server. The X.X.X.X is a host address and cannot be the IP address of the broadcast, multicast or reference clock. In this configuration, the local device can synchronize to the remote server but not the vice versa.
3Com Router 5000 Family and Router 6000 Family Command Reference open ● 253 open Purpose Use the open command to set up control connection to the remote FTP server. Syntax open ipaddr [ port ] [-a ip-address] Parameters ipaddr IP address of the remote FTP server. port Port number of the remote FTP server. -a ip-address Source address of the FTP client. Example Set up FTP connection to the FTP server on the host 10.110.3.1. [ftp] open 10.110.3.
254 ● option 3Com Router 5000 Family and Router 6000 Family Command Reference option Purpose Use the option command to specify the logical relationship between the addresses to be probed in the detect group. Use the undo option command to remove the configured logical relationship. Syntax option [ and | or ] undo option [ and | or ] Parameters and Specifies that the relationship between the addresses to be probed is logical AND.
3Com Router 5000 Family and Router 6000 Family Command Reference pad-mode pos enable ● 255 pad-mode pos enable Purpose Use the pad-mode pos enable command to enable POSPAD access mode. Use the undo pad-mode pos enable command to restore the default PAD access mode, that is, X.25 PAD. Syntax pad-mode pos enable undo pad-mode pos enable [ posid number ] Parameters posid number Example Enable POSPAD access mode on interface Serial 1/0/0. ID of a POS connection. Valid values are 0 to 255.
256 ● parity 3Com Router 5000 Family and Router 6000 Family Command Reference parity Purpose Use the parity command to set the check bit of the user interface. Use the undo parity command to restore the default, or none. Syntax parity { none | even | odd | mark | space } undo parity Parameters Example none No parity check. even Even parity check. odd Odd parity check. mark Mark parity check. space Space parity check. Set the transmission check bit to odd on the AUX interface.
3Com Router 5000 Family and Router 6000 Family Command Reference passive ● 257 passive Purpose Use the passive command to set data transmission mode to passive. Use the undo passive command to set data transmission mode to active. Syntax passive undo passive Parameters None Default The default transmission mode is passive. Example Set data transmission mode to passive.
258 ● password 3Com Router 5000 Family and Router 6000 Family Command Reference password Purpose Use the password command to configure the password required for logging onto the FTP server. Use the undo password command to cancel the configured password. Syntax password password undo password Parameters password Default By default, no password is configured for logging onto the FTP server. Example Set the password for logging onto the FTP server to “hwping”. Password required at login.
3Com Router 5000 Family and Router 6000 Family Command Reference peer-public-key end ● 259 peer-public-key end Purpose Use the peer-public-key end command to return to system view from public key view. Syntax peer-public-key end Parameters None Example Exit public key view and save the configuration.
260 ● ping 3Com Router 5000 Family and Router 6000 Family Command Reference ping Purpose Use the ping command to test connectivity of an IP network and reachability of a host. Syntax ping [ -a X.X.X.X | -c count | -d | -f | -h ttl_value | -i { interface-type interface-number } | ip | -n | -p pattern | -q | -r | -s packetsize | -t timeout | tos | -v | vpn-instance vpn-instance-name ] * host Parameters -a X.X.X.X Sets the source IP address in the ICMP ECHO-REQUEST packets.
3Com Router 5000 Family and Router 6000 Family Command Reference vpn-instance vpn-instance-name Defaults ping ● 261 Sets the vpn-instance name of MPLS VPN, specifying the VPN attribute configured in this ping command, that is, name of the associated vpn-instance created locally. The -i and -vpn options cannot be specified in the same command. host Name or IP address of the destination host. ip Adopts the IP protocol.
262 ● ping 3Com Router 5000 Family and Router 6000 Family Command Reference A host sends an ICMP ECHO-REQUEST. If the connection to the destination network is normal, the destination host will be able to receive the ICMP ECHO-REQUEST and send an ICMP ECHO-REPLY packet back to the source host. You can use the ping command to test network connectivity or line quality.
3Com Router 5000 Family and Router 6000 Family Command Reference pos-server app tcp ● 263 pos-server app tcp Purpose Use the pos-server app tcp command to configure a POS application in TCP/IP connection mode. Use the undo pos-server app tcp command to remove the specified POS application. Syntax pos-server app tcp app-number ip-address port-number undo pos-server app tcp app-number Parameters app-number Number for the POS application. Valid values are 0 to 31.
264 ● pos-server app x25 3Com Router 5000 Family and Router 6000 Family Command Reference pos-server app x25 Purpose Use the pos-server app x25 command to configure the specified POS application on the POSPAD client router. Use the undo pos-server app x25 command to remove the specified POSPAD client application. Syntax pos-server app x25 appid x121-address undo pos-server app x25 appid Parameters app-id Number of a POS application. Valid values are 0 to 31. x121-address X.
3Com Router 5000 Family and Router 6000 Family Command Reference pos-server checkschar ● 265 pos-server checkschar Purpose Use the pos-server checkschar command to enable the system to check POS packets for the string 10 04. Use the undo pos-server checkschar command to disable the system to check POS packets for the string 10 04. Syntax pos-server checkschar undo pos-server checkschar Parameters None Default By default, the system does not check POS packets for the string 10 04.
266 ● pos-server enable 3Com Router 5000 Family and Router 6000 Family Command Reference pos-server enable Purpose Use the pos-server enable command to enable POS access server. Use the undo pos-server enable command to disable server. Syntax pos-server enable undo pos-server enable Parameters None Default By default, POS access server is disabled. Example Enable POS access server.
3Com Router 5000 Family and Router 6000 Family Command Reference pos-server fcm ● 267 pos-server fcm Purpose Use the pos-server fcm command to configure FCM parameters for modem negotiation. Use the undo pos-server fcm command to restore the defaults. Syntax pos-server fcm { answertime time | tradetime time | packetinterval time } undo pos-server fcm [ answertime ] [ tradetime ] [ packetinterval ] Parameters answertime time Maximum duration waiting for an answer (in milliseconds).
268 ● pos-server fcm 3Com Router 5000 Family and Router 6000 Family Command Reference short duration setting may cause modem negotiation failures; on the router, the modem port intermittently comes up/goes down and no data is transmitted or received. In this case, you can increase the value of the answer timer. ■ After the negotiation succeeds, the two parties begin to communicate.
3Com Router 5000 Family and Router 6000 Family Command Reference pos-server map ● 269 pos-server map Purpose Use the pos-server map command to configure a multi-application POS access map entry. Use the undo pos-server map command to delete a multi-application POS access map entry. Syntax pos-server map { des-code | default } app-number undo pos-server map { des-code | default } Parameters des-code Destination address in the TPDU header of the POS packet.
270 ● pos-server padmode 3Com Router 5000 Family and Router 6000 Family Command Reference pos-server padmode Purpose Use the pos-server padmode command to configure a POSPAD packet encapsulation format. Syntax pos-server padmode { 0 | 1 } Parameters 0 Encapsulates POSPAD packets in synchronous format. 1 Encapsulates POSPAD packets in asynchronous format. Default By default, POSPAD packets are encapsulated in synchronous format.
3Com Router 5000 Family and Router 6000 Family Command Reference pos-server source-ip ● 271 pos-server source-ip Purpose Use the pos-server source-ip command to bind the specified application with the source address of a TCP connection. Use the undo pos-server source-ip command to remove the binding. Syntax pos-server source-ip app-number ip-address undo pos-server source-ip app-number Parameters Example app-number Number of an application. Valid values are 0 to 31.
272 ● pos-server wait-time 3Com Router 5000 Family and Router 6000 Family Command Reference pos-server wait-time Purpose Use the pos-server wait-time command to set the POSPAD wait timer. Use the undo pos-server wait-time command to restore the default of the POSPAD wait timer, that is, 200 milliseconds. Syntax pos-server wait-time time undo pos-server wait-time Parameters time Example Set the POSPAD wait timer to 300 milliseconds. POSPAD wait timer setting (in 100-millisecond units).
3Com Router 5000 Family and Router 6000 Family Command Reference probe-failtimes ● 273 probe-failtimes Purpose Use the probe-failtimes command to configure the number of consecutive probe failures allowed in an HWPing test before a trap is sent to the NMS. Use the undo probe-failtimes command to restore the default. Syntax probe-failtimes times undo probe-failtimes Parameters times Example Send a trap to the NMS after three consecutive probe failures for an HWPing test.
274 ● protocol inbound 3Com Router 5000 Family and Router 6000 Family Command Reference protocol inbound Purpose Use the protocol inbound command to enable the current user interface to support Telnet, PAD, SSH, or all of them. Syntax protocol inbound { all | pad | ssh | telnet } Parameters all Supports all the protocols, PAD, Telnet, and SSH. pad Supports PAD only. ssh Supports SSH only. telnet Supports Telnet only. Default By default, the VTY interface supports all these protocols.
3Com Router 5000 Family and Router 6000 Family Command Reference public-key-code begin ● 275 public-key-code begin Purpose Use the public-key-code begin command to enter public key code view. Syntax public-key-code begin Parameters None Example Enter public key code view to input the key.
276 ● public-key-code end 3Com Router 5000 Family and Router 6000 Family Command Reference public-key-code end Purpose Use the public-key-code end command to return from public key code view to public key view and to save the configured public key. Syntax public-key-code end Parameters None Example Exit public key code view and save the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference put ● 277 put Purpose Use the put command to FTP a local file to the remote FTP server. Syntax put localfile [ remotefile ] Parameters localfile Local file name. remotefile File name on the remote FTP server. Default If no name is assigned to the file to be saved on the FTP server, the name of the local file is used. Example Upload the local file temp.c to the remote FTP server and save it as temp1.c. [ftp] put temp.c temp1.
278 ● put 3Com Router 5000 Family and Router 6000 Family Command Reference put Purpose Use the put command to upload a local file to the remote SFTP server. Syntax put local-file [ remote-file ] Parameters local-file Name of the source file at the local end. remote-file Name assigned to the file to be saved on the remote SFTP server. Example Upload local file temp.c to the remote SFTP server and save it with the name temp1.c. sftp-client> put temp.c temp1.
3Com Router 5000 Family and Router 6000 Family Command Reference pwd ● 279 pwd Purpose Use the pwd command to view the working directory on the remote FTP server. Syntax pwd Parameters None Example Display the working directory on the remote FTP server. [ftp] pwd "d:/temp" is current directory.
280 ● pwd 3Com Router 5000 Family and Router 6000 Family Command Reference pwd Purpose Use the pwd command, you can view the current path. Syntax pwd Parameters None Example Display the current path. <3Com> pwd flash:/test View This command can be used in the following views: ■ Description User view If the current path is not set, the operation will fail.
3Com Router 5000 Family and Router 6000 Family Command Reference pwd Purpose Use the pwd command to display the current directory on the SFTP server. Syntax pwd Parameters None Example Display the current directory on the SFTP server.
282 ● quit 3Com Router 5000 Family and Router 6000 Family Command Reference quit Purpose Use the quit command to disconnect from the remote FTP server and exit to user view. Syntax quit Parameters None Example Disconnect from the remote FTP server and exit to user view.
3Com Router 5000 Family and Router 6000 Family Command Reference quit ● 283 quit Purpose Use the quit command to terminate the connection to the remote SFTP server and exit to system view as you would with the bye and exit commands. Syntax quit Parameters None Example Terminate the connection to the remote SFTP server.
284 ● quit 3Com Router 5000 Family and Router 6000 Family Command Reference quit Purpose Use the quit command to terminate the connection to the remote SSH server. Syntax quit Parameters None Example Terminate the connection to the remote SSH server.
3Com Router 5000 Family and Router 6000 Family Command Reference re-authentication ● 285 re-authentication Purpose Use the re-authentication command to enable console login re-authentication. Use the undo re-authentication command to disable console login re-authentication. Syntax re-authentication undo re-authentication Parameters None Default By default, console login re-authentication is disabled. Example Enable console login re-authentication.
286 ● reboot 3Com Router 5000 Family and Router 6000 Family Command Reference reboot Purpose Use the reboot command to have the router reboot. Syntax reboot Parameters None Example Reboot the device. <3Com> reboot This command will reboot the system. The current configuration has not been saved and will be lost if you continue.
3Com Router 5000 Family and Router 6000 Family Command Reference redirect bind vpn-instance ● 287 redirect bind vpn-instance Purpose Use the redirect bind vpn-instance command to bind a VPN instance to the user interface. Use the undo redirect bind vpn-instance command to remove the binding. Syntax redirect bind vpn-instance vpn-instance-name undo redirect bind vpn-instance Parameters vpn-instance-name Default By default, no VPN instance is bound with the user interface.
288 ● redirect disconnect 3Com Router 5000 Family and Router 6000 Family Command Reference redirect disconnect Purpose Use the redirect disconnect command to disconnect a redirected telnet connection manually. Syntax redirect disconnect Parameters None Example Manually disconnect a redirected Telnet connection.
3Com Router 5000 Family and Router 6000 Family Command Reference redirect enable ● 289 redirect enable Purpose Use the redirect enable command to enable redirect on the asynchronous serial interface. Use the undo redirect enable command to disable redirect on the corresponding asynchronous serial interface. Syntax redirect enable undo redirect enable Parameters None Default By default, the asynchronous serial interface does not support redirect. Example Enable redirect on user interface TTY7.
290 ● redirect listen-port 3Com Router 5000 Family and Router 6000 Family Command Reference redirect listen-port Purpose Use the redirect listen-port command to specify a port to listen for redirected Telnet connections. Use the undo redirect listen-port command to restore the default listening port. Syntax redirect listen-port port-number undo redirect listen-port Parameters port-number Default The default number of the port that listens for redirected Telnet connections is TTY number plus 2000.
3Com Router 5000 Family and Router 6000 Family Command Reference redirect refuse-negotiation ● 291 redirect refuse-negotiation Purpose Use the redirect refuse-negotiation command to disable Telnet option negotiation during setup of redirected Telnet connection. Use the undo redirect refuse-negotiation command to enable Telnet option negotiation during setup of redirected Telnet connection.
292 ● redirect return-deal from-telnet 3Com Router 5000 Family and Router 6000 Family Command Reference redirect return-deal from-telnet Purpose Use the redirect return-deal from-telnet command to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the Telnet client. Use the undo redirect return-deal from-telnet command to disable the router that redirects Telnet connection to process carriage returns.
3Com Router 5000 Family and Router 6000 Family Command Reference redirect return-deal from-terminal ● 293 redirect return-deal from-terminal Purpose Use the redirect return-deal from-terminal command to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the terminal (a PC connected to the console port for example).
294 ● redirect timeout 3Com Router 5000 Family and Router 6000 Family Command Reference redirect timeout Purpose Use the redirect timeout command to specify the amount of time that a redirected Telnet connection can stay idle. After that, the connection is disconnected. Use the undo redirect timeout command to allow the system to maintain an always-on redirected telnet connection.
3Com Router 5000 Family and Router 6000 Family Command Reference remotehelp ● 295 remotehelp Purpose Use the remotehelp command to view the help for the FTP commands. Syntax remotehelp [ protocol-command ] Parameters protocol-command Example Display the syntax of the user command. FTP command.
296 ● remove 3Com Router 5000 Family and Router 6000 Family Command Reference remove Purpose Use the remove command to delete the specified file from the server as you would with the delete command. Syntax remove remote-file Parameters remote-file Example Delete file temp.c from the server. Name of a file on the server. sftp-client> remove temp.
3Com Router 5000 Family and Router 6000 Family Command Reference remove slot ● 297 remove slot Purpose Use the remove slot command to have the system do some pre-processing work before removing an interface card. Use the undo remove slot command to cancel the inadvertent operation on the remove slot command. Syntax remove slot slotnum undo remove slot slotnum Parameters slotnum Example Remove the interface card from slot 3. Slot number for the interface card.
298 ● rename 3Com Router 5000 Family and Router 6000 Family Command Reference rename Purpose Use the rename command to change the name of the specified file on the SFTP server. Syntax rename oldname newname Parameters oldname Original file name. newname New file name. Example Change the name of file temp1 on the SFTP server to temp2.
3Com Router 5000 Family and Router 6000 Family Command Reference rename ● 299 rename Purpose Use the rename command to rename a file. Syntax rename filename-source filename-dest Parameters filename-source Name of the source file. filename-dest Name of the target file. Example <3Com> dir Directory of flash:/ 0 -rw2145123 Jul 12 2001 12:28:08 1 -rw595 Jul 12 2001 10:47:50 2 drw- Jul 12 2001 19:41:20 3 -rw50 Jul 12 2001 20:26:48 6477 KBytes total (2144 KBytes free) system.bin vrpcfg.
300 ● rename 3Com Router 5000 Family and Router 6000 Family Command Reference rename Purpose Use the rename command to rename a file on the FTP server from the FTP client. Parameters rename filename1 filename2 Parameters filename1 Original name of a file on the FTP server. filename2 New name for the file. Default On FTP servers, some functions such as rename and delete are optional, or, by default, disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference reset alarm urgent ● 301 reset alarm urgent Purpose Use the reset alarm urgent command to clear all the stored alarms. Syntax reset alarm urgent Parameters None Example Clear all the stored alarms.
302 ● reset fcm 3Com Router 5000 Family and Router 6000 Family Command Reference reset fcm Purpose Use the reset fcm command to clear the dial-up negotiation failure counter and the timeout disconnection counter for each FCM interface.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ip netstream statistics ● 303 reset ip netstream statistics Purpose Use the reset ip netstream statistics command to age and export all stream statistics to clear the NetStream cache. Syntax reset ip netstream statistics Parameters None Example Age and export all stream statistics to clear the NetStream cache.
304 ● reset logbuffer 3Com Router 5000 Family and Router 6000 Family Command Reference reset logbuffer Purpose Use the reset logbuffer command to clear information in the log buffer. Syntax reset logbuffer Parameters None Example Clear information in the log buffer.
3Com Router 5000 Family and Router 6000 Family Command Reference reset pos ● 305 reset pos Purpose Use the reset pos command to clear the counters for POS applications and POS access ports, that is, the information displayed with the display pos-app and display pos-interface commands. Syntax reset pos Parameters None Example Clear the counters for POS applications and POS access ports.
306 ● reset recycle-bin 3Com Router 5000 Family and Router 6000 Family Command Reference reset recycle-bin Purpose Use the reset recycle-bin command to delete one or files from the recycle bin completely. Syntax reset recycle-bin [filename] [flash:/] [/force] Parameters filename Name of the file to be deleted. (You need to specify the path.) flash:/ Deletes all files from the Flash memory. /force Empties the recycle bin. Example Delete the specified file from the recycle bin.
3Com Router 5000 Family and Router 6000 Family Command Reference reset saved-configuration ● 307 reset saved-configuration Purpose Use the reset saved-configuration command to delete the configuration file loaded at this startup from the Flash. Syntax reset saved-configuration Parameters None Example Delete the configuration file loaded at this startup from the Flash. <3Com> reset saved-configuration The saved configuration will be erased.
308 ● reset trapbuffer 3Com Router 5000 Family and Router 6000 Family Command Reference reset trapbuffer Purpose Use the reset trapbuffer command to clear information in the trap buffer. Syntax reset trapbuffer Parameters None Example Clear information in the trap buffer.
3Com Router 5000 Family and Router 6000 Family Command Reference retry ● 309 retry Purpose Use the retry command to set the maximum number of probing retries during an auto detect interval. Use the undo retry command to restore the default maximum number of probing retries during an auto detect interval. Syntax retry retry-times undo retry Parameters retry-times Example Specify the maximum number of probing retries during an auto detect interval to 3 for detect group 10.
310 ● rlogin 3Com Router 5000 Family and Router 6000 Family Command Reference rlogin Purpose Use the rlogin command to rlogin onto the specified remote host with the specified user name. Syntax rlogin remote-host username Parameters remote-host IP address or name of the UNIX host onto which you want to log. username User name for the remote login, which must have been registered with the Unix host. Example Log as the user zhb onto the UNIX server at 192.168.0.200. <3Com> rlogin 192.168.0.
3Com Router 5000 Family and Router 6000 Family Command Reference rmdir ● 311 rmdir Purpose Use the rmdir command to delete a specified directory from the FTP server. Syntax rmdir pathname Parameters pathname Example Delete the d:/temp1 directory from the FTP server. Directory name on the remote FTP server.
312 ● rmdir 3Com Router 5000 Family and Router 6000 Family Command Reference rmdir Purpose Use the rmdir command to delete a directory. Syntax rmdir directory Parameters directory Example <3Com>dir Directory of flash:/ 0 drw- Jul 12 2001 20:23:37 1 -rw595 Jul 12 2001 20:13:19 6477 KBytes total (2144 KBytes free) Name of the directory. subdir vrpcfg.cfg Delete directory subdir.
3Com Router 5000 Family and Router 6000 Family Command Reference rmdir ● 313 rmdir Purpose Use the rmdir command to delete the specified directory from the remote SFTP server. Syntax rmdir remote-path Parameters remote-path Example Delete directory D:/temp1 from the remote SFTP server. Name of a directory on the remote SFTP server.
314 ● rmon alarm 3Com Router 5000 Family and Router 6000 Family Command Reference rmon alarm Purpose Use the rmon alarm command to set an alarm entry. When an exception occurs, the alarm is triggered. The alarm in turn triggers the corresponding event, which can be log, trap, or log-and-trap. Use the undo rmon alarm command to remove an alarm entry.
3Com Router 5000 Family and Router 6000 Family Command Reference rmon event ● 315 rmon event Purpose Use the rmon event command to add an event entry. Use the undo rmon event command to remove an event entry. Syntax rmon event event-entry [ description string ] { log | trap trap-community | log-trap log-trapcommunity | none } [ owner text ] undo rmon event event-entry Parameters Example event-entry Event index. Valid values are 1 to 65,535.
316 ● rmon history 3Com Router 5000 Family and Router 6000 Family Command Reference rmon history Purpose Use the rmon history command to add a history control entry. Use the undo rmon history command to remove a history control entry. Syntax rmon history history-control-entry buckets number interval sampling-interval [ owner text-string ] undo rmon history entry-number Parameters history-control-entry History control index. Valid values are 1 to 65,535.
3Com Router 5000 Family and Router 6000 Family Command Reference rmon prialarm ● 317 rmon prialarm Purpose Use the rmon prialarm command to add an entry to the prialarm table. Use the undo rmon prialarm command to remove an entry from the prialarm table.
318 ● rmon prialarm Description 3Com Router 5000 Family and Router 6000 Family Command Reference The number of prialarm entries you can create is hardware-dependent.
3Com Router 5000 Family and Router 6000 Family Command Reference rmon statistics ● 319 rmon statistics Purpose Use the rmon statistics command to add a statistics entry. Use the undo rmon statistics command to remove a statistics entry. Syntax rmon statistics entry-number [ owner text ] undo rmon statistics entry-number Parameters Example entry-number Statistics index. Valid values are 1 to 65,535. owner text Owner of the entry, consisting of a string from 1 to 127 characters long.
320 ● rsh 3Com Router 5000 Family and Router 6000 Family Command Reference rsh Purpose Use the rsh command to execute a command on a remote host remotely. Syntax rsh host [ user username ] command remote-command Parameters host IP address or host name of the remote host. user username Login user that is allowed to execute the RSH command on the remote host. If no user is specified, the system name of the router, which is specified using the sysname command, applies.
3Com Router 5000 Family and Router 6000 Family Command Reference 2004-01-02 2001-07-30 2004-07-13 rsh ● 321 15:54 102,400 wrshdnt.exe 18:05 766 wrshdnt.ico 09:10 3,253 INSTALL.LOG 21 files 1,749,848 bytes 2 directories 2,817,417,216 bytes free Execute the interactive command time on the RSH server at 169.254.1.100 (the operating system is Windows 2000). <3Com> rsh 169.254.1.100 command time Trying 169.254.1.100 ... Press CTRL+K to abort The current time is: 6:56:42.
322 ● rsa local-key-pair create 3Com Router 5000 Family and Router 6000 Family Command Reference rsa local-key-pair create Purpose Use the rsa local-key-pair create command to generate the local RSA host key pair and server key pair. Syntax rsa local-key-pair create Parameters None Example Generate the local host key pair and server key pair.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command: rsa local-key-pair destroy rsa local-key-pair create ● 323
324 ● rsa local-key-pair destroy 3Com Router 5000 Family and Router 6000 Family Command Reference rsa local-key-pair destroy Purpose Use the rsa local-key-pair destroy command to remove all RSA keys on the server (including the host key pair and the server key pair). Syntax rsa local-key-pair destroy Parameters None Example Remove all keys on the server. [3Com] rsa local-key-pair destroy % Keys to be removed are named 3Com _Host .
3Com Router 5000 Family and Router 6000 Family Command Reference rsa peer-public-key ● 325 rsa peer-public-key Purpose Use the rsa peer-public-key command to enter public key view. After that, you may use the public-key-code begin command and the public-key-code end command to configure the public key of the client.
326 ● save 3Com Router 5000 Family and Router 6000 Family Command Reference save Purpose Use the save command to save the current configuration file to the storage device. Syntax save [file-name | safely ] Parameters file-name Filename, whose extension must be cfg. If this argument is not specified, the configurations you made are saved to the configuration file loaded at this startup.
3Com Router 5000 Family and Router 6000 Family Command Reference screen-length ● 327 screen-length Purpose Use the screen-length command to set the number of lines displayed on the terminal screen. Use the undo screen-length command to restore the default. Syntax screen-length screen-length undo screen-length Parameters screen-length Example Set the number of lines on the terminal screen to 30. Number of lines displayed on the screen. Valid values are 0 to 512.
328 ● screen-width 3Com Router 5000 Family and Router 6000 Family Command Reference screen-width Purpose Use the screen-width command to set the width of the terminal screen, that is, how many characters can be displayed in one line. Use the undo screen-width command to restore the width of the terminal screen to the default value. Syntax screen-width width undo screen-width Parameters width Example Set the width of the terminal screen for console port to 100.
3Com Router 5000 Family and Router 6000 Family Command Reference send ● 329 send Purpose Use the send command to transfer messages between user interfaces. Use the send all command to send messages to all user interfaces. Use the send number command to send messages to the user interface specified by its absolute index. Use the send type-name number command to send messages to the user interface specified by its interface type and relative index.
330 ● send-trap 3Com Router 5000 Family and Router 6000 Family Command Reference send-trap Purpose Use the send-trap command to configure the type of events that trigger trap sending. Use the undo send-trap command to cancel the configuration of the event type. Syntax send-trap { all | probefailure | testcomplete | testfailure } undo send-trap { all | probefailure | testcomplete | testfailure } Parameters probefailure Sends traps after test packet transmission fails.
3Com Router 5000 Family and Router 6000 Family Command Reference sendpacket passroute ● 331 sendpacket passroute Purpose Use the sendpacket passroute command to enable routing table bypass. Use the undo sendpacket passroute command to disable routing table bypass. Syntax sendpacket passroute undo sendpacket passroute Parameters None Default By default, routing table bypass is disabled. Example Bypass routing table when sending ICMP packets.
332 ● schedule reboot at 3Com Router 5000 Family and Router 6000 Family Command Reference schedule reboot at Purpose Use the schedule reboot at command to enable the scheduled reboot function of the router and schedule the reboot time and date. Syntax schedule reboot at time [ date ] Parameters time Reboot time of the router, in the format of hh:mm (hours:minutes). Valid values for hh are 0 to 23, and valid values for mm are 0 to 59.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands schedule reboot at ● 333 ■ After the configuration of the schedule reboot at command, a timer starts. This timer is cyclic and measured in minutes. For example, if you set at 12:05:26 to have the router reboot at 12:06:00, the router will reboot at 12:06:26 instead of 12:06:00.
334 ● schedule reboot delay 3Com Router 5000 Family and Router 6000 Family Command Reference schedule reboot delay Purpose Use the schedule reboot delay command to enable scheduled router reboot and set the waiting time. Syntax schedule reboot delay { time | minutes } Parameters time Time waiting for reboot, in the format of hhh:mm (hours:minutes), where valid values for hhh are 0 to 720, and valid values for mm are 0 to 59. minutes Time waiting for reboot (in absolute minute value).
3Com Router 5000 Family and Router 6000 Family Command Reference set authentication password ● 335 set authentication password Purpose Use the set authentication password command to set a local authentication password. Use the undo set authentication password command to remove the local authentication password. Syntax set authentication password { simple | cipher } password undo set authentication password Parameters Default simple Plain text password. cipher Encrypted password.
336 ● set authentication password 3Com Router 5000 Family and Router 6000 Family Command Reference in ciphertext regardless of whether the password you entered is in plain text or in ciphertext.
3Com Router 5000 Family and Router 6000 Family Command Reference sftp ● 337 sftp Purpose Use the sftp command to establish a connection to the remote SFTP server and enter SFTP client view.
338 ● sftp Example 3Com Router 5000 Family and Router 6000 Family Command Reference Connect to the SFTP server with IP address 10.1.1.2 and using the default algorithms. [3Com] sftp 10.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference sftp server enable ● 339 sftp server enable Purpose Use the sftp server enable command to enable the secure FTP (SFTP) server. Use the undo sftp server command to disable the SFTP server. Syntax sftp server enable undo sftp server Parameters None Default By default, the SFTP server is disabled. Example Enable the SFTP server. [3Com] sftp server enable Disable the SFTP server.
340 ● sftp source-interface 3Com Router 5000 Family and Router 6000 Family Command Reference sftp source-interface Purpose Use the sftp source-interface command to specify a source interface, which must be an existing local interface, for the SFTP client. After that, the IP address of the specified interface is used as the source IP address in each packet sent by the SFTP client. Use the undo sftp source-interface command to delete the source interface specified for the SFTP client.
3Com Router 5000 Family and Router 6000 Family Command Reference sftp source-ip ● 341 sftp source-ip Purpose Use the sftp source-ip command to specify a source IP address for the packets sent by the SFTP client. This IP address must be a local IP address. Use the undo sftp source-ip command to delete the source IP address specified for the SFTP client. After that, the source IP address of each packet sent by the SFTP client is the IP address of the interface where the packet is sent out.
342 ● shell 3Com Router 5000 Family and Router 6000 Family Command Reference shell Purpose Use the shell command to enable terminal services on the user interface. Use the undo shell command to cancel the current setting. Syntax shell undo shell Parameters None Default By default, terminal services are enabled on all user interfaces. Example Disable terminal services on the VTYs 0 through 4.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent ● 343 snmp-agent Purpose Use the snmp-agent command to enable SNMP agent. Use the undo snmp-agent command to disable SNMP agent. Syntax snmp-agent undo snmp-agent Parameters None Default By default, SNMP agent is disabled. Example Disable the operating SNMP agent.
344 ● snmp-agent community 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent community Purpose Use the snmp-agent community command to configure the read/write attribute of a community, the MIB view that it can access, and the ACL applied to it. The configuration overwrites the old configuration of the community, if there is any. Use the undo snmp-agent community command to cancel the setting.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent group ● 345 snmp-agent group Purpose Use the snmp-agent group command to configure a new SNMP group, or to map an SNMP user or group to an SNMP view. Use the undo snmp-agent group command to delete a specified SNMP group.
346 ● snmp-agent group Example 3Com Router 5000 Family and Router 6000 Family Command Reference Create the SNMPv3 group named Johngroup. [3Com] snmp-agent group v3 Johngroup View This command can be used in the following views: ■ Description System view If no view is specified, the snmp-agent group v3 command considers ViewDefault view as read-only by default. The rights of other views needs configuration. The snmp-agent group { v1 | v2c } command configures the SNMP community attribute.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent local-engineid ● 347 snmp-agent local-engineid Purpose Use the snmp-agent local-engineid command to configure an engine ID for the local SNMP entity. Use the undo snmp-agent local-engineid command to remove the current setting. Syntax snmp-agent local-engineid engineid undo snmp-agent local-engineid Parameters engineid Default The default engine ID is enterprise number plus equipment information.
348 ● snmp-agent mib-view 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent mib-view Purpose Use the snmp-agent mib-view command to create or update the information about a view. Use the undo snmp-agent mib-view command to delete the view information. Syntax snmp-agent mib-view { included | excluded } view-name oid-tree undo snmp-agent mib-view view-name Parameters view-name Name of the view. oid-tree OID MIB subtree for the MIB object subtree.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent packet max-size ● 349 snmp-agent packet max-size Purpose Use the snmp-agent packet max-size command to set the maximum length of the SNMP packets that the agent can receive/send. Use the undo snmp-agent packet max-size command to cancel the current setting.
350 ● snmp-agent sys-info 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent sys-info Purpose Use the snmp-agent sys-info command to set system information, including system contact, physical location of the node, and SNMP version. Use the undo snmp-agent sys-info command to cancel the current setting.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent target-host ● 351 snmp-agent target-host Purpose Use the snmp-agent target-host command to set the destination that receives SNMP notifications. Use the undo snmp-agent target-host command to cancel the current setting. Use the snmp-agent target-host command in conjunction with the snmp-agent trap enable command. Syntax snmp-agent target-host trap address udp-domain X.X.X.
352 ● snmp-agent target-host 3Com Router 5000 Family and Router 6000 Family Command Reference Send SNMP traps to 10.1.1.1, using the community name of public. [3Com] snmp-agent trap enable standard [3Com] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname public Send traps to 202.38.160.6 in private network blue, using the community name of public. [3Com] snmp-agent target-host trap address udp-domain 202.38.160.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap enable ● 353 snmp-agent trap enable Purpose Use the snmp-agent trap enable command to enable the device to send traps and set the trap and notification parameters. Use the undo snmp-agent trap enable command to cancel the current setting.
354 ● snmp-agent trap enable 3Com Router 5000 Family and Router 6000 Family Command Reference The standard traps include authentication, coldstart, linkdown, linkup, and warmstart.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap life ● 355 snmp-agent trap life Purpose Use the snmp-agent trap life command to set the lifetime of traps. The expired traps are discarded without being retained or sent. Use the undo snmp-agent trap life command to cancel the current setting. Syntax snmp-agent trap life seconds undo snmp-agent trap life Parameters seconds Example Set the lifetime of traps to 60 seconds. Lifetime (in seconds).
356 ● snmp-agent trap queue-size 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap queue-size Purpose Use the snmp-agent trap queue-size command to set the length of the trap queue to the specified host. Use the undo snmp-agent trap queue-size command to cancel the setting. Syntax snmp-agent trap queue-size size undo snmp-agent trap queue-size Parameters size Example Set the length of the outgoing trap queue to 200. Length of the message queue.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap source ● 357 snmp-agent trap source Purpose Use the snmp-agent trap source command to specify the source address of traps. Use the undo snmp-agent trap source command to cancel the current setting. Syntax snmp-agent trap source interface-type interface-number undo snmp-agent trap source Parameters Example interface-type Interface type. interface-number Interface number.
358 ● snmp-agent usm-user 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent usm-user Purpose Use the snmp-agent usm-user command to add a new user to an SNMP group. Use the undo snmp-agent usm-user command to delete an SNMP group user.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent usm-user ● 359 [3Com] snmp-agent usm-user v3 John Johngroup authentication-mode md5 hello View This command can be used in the following views: ■ Description System view After you configure a remote user for an agent, engine ID is needed during authentication. If the engine ID changes after that, the user corresponding to the original engine ID becomes invalid.
360 ● source-interface 3Com Router 5000 Family and Router 6000 Family Command Reference source-interface Purpose Use the source-interface command to configure the source interface in the transmitted test packets. Use the undo source-interface command to cancel the configuration. Syntax source-interface interface-type interface-number undo source-interface Parameters interface-type Interface type. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference source-ip ● 361 source-ip Purpose Use the source-ip command to configure a source IP address for this test. Use the undo source-ip command to cancel the configuration. Syntax source-ip ip-address undo source-ip Parameters ip-address Example Set the source IP address for this test to 169.254.10.2. Source IP address used in the test. [Router-administrator-icmp] source-ip 169.254.10.
362 ● source-port 3Com Router 5000 Family and Router 6000 Family Command Reference source-port Purpose Use the source-port command to configure a source port number for this test. Use the undo source-port command to cancel the configuration. Syntax source-port port-number undo source-port Parameters port-number Example Set the source port number to 8000 for this test. Source port number used in the test. If no value is specified, the default is 0.
3Com Router 5000 Family and Router 6000 Family Command Reference speed ● 363 speed Purpose Use the speed command to set the transmission rate on the user interface. Use the undo speed command to restore the default. Syntax speed speed-value undo speed Parameters Example speed-value Transmission rate in bps.
364 ● ssh authentication-type default 3Com Router 5000 Family and Router 6000 Family Command Reference ssh authentication-type default Purpose Use the ssh authentication-type default command to specify a default authentication mode for SSH users. Use the undo ssh authentication-type default command to clear the specified default authentication mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh client assign rsa-key ● 365 ssh client assign rsa-key Purpose Use the ssh client assign rsa-key command to associate an SSH server with the name assigned to its public key. When connecting to this server, the client verifies its trustworthiness based on this association. Use the undo ssh client assign rsa-key command to remove the association.
366 ● ssh client first-time enable 3Com Router 5000 Family and Router 6000 Family Command Reference ssh client first-time enable Purpose Use the ssh client first-time enable command to enable the SSH client to perform first-time authentication on SSH servers. Use the undo ssh client first-time command to disable the SSH client to perform first-time authentication on SSH servers.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh server authentication-retries ● 367 ssh server authentication-retries Purpose Use the ssh server authentication-retries command to set the number of SSH connection authentication retries, which is validated at next login. Use the undo ssh server authentication-retries command to restore the default.
368 ● ssh server compatible_ssh1x enable 3Com Router 5000 Family and Router 6000 Family Command Reference ssh server compatible_ssh1x enable Purpose Use the ssh server compatible_ssh1x enable command to enable the SSH server to work with SSH1.X clients. Use the undo ssh server compatible_ssh1x command to disable the SSH server to work with SSH1.X clients. Syntax ssh server compatible_ssh1x enable undo ssh server compatible_ssh1x Parameters None Default By default, the SSH server can work with SSH1.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh server rekey-interval ● 369 ssh server rekey-interval Purpose Use the ssh server rekey-interval command to set the interval for updating the server key. Use the undo ssh server rekey-interval command to cancel the current setting. Syntax ssh server rekey-interval hours undo ssh server rekey-interval Parameters hours Default By default, the server key is not updated.
370 ● ssh-server source-interface 3Com Router 5000 Family and Router 6000 Family Command Reference ssh-server source-interface Purpose Use the ssh-server source-interface command to specify a source interface, which must be an existing local interface, for the SSH server. After that, the IP address of the specified interface is used as the source IP address in each packet sent by the SSH server. Use the undo ssh-server source-interface command to delete the source interface specified for the SSH server.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh-server source-ip ● 371 ssh-server source-ip Purpose Use the ssh-server source-ip command to specify a source IP address for the packets sent by the SSH server. This IP address must be a local IP address. Use the undo ssh-server source-ip command to delete the source IP address specified for the SSH server.
372 ● ssh server timeout 3Com Router 5000 Family and Router 6000 Family Command Reference ssh server timeout Purpose Use the ssh server timeout command to set a timeout for SSH connection authentication at login. It becomes valid at next login. Use the undo ssh server timeout command to restore the default, or 60 seconds. Syntax ssh server timeout seconds undo ssh server timeout Parameters seconds Example Set authentication timeout to 80 seconds at login. Specifies the login timeout (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference ssh user ● 373 ssh user Purpose Use the ssh user command to create an SSH user. Use the undo ssh user command to delete an SSH user. Syntax ssh user username undo ssh user username Parameters username Default If the default authentication mode for SSH users is password and local AAA authentication is adopted, you are not necessarily use the ssh user command to create an SSH user.
374 ● ssh user assign 3Com Router 5000 Family and Router 6000 Family Command Reference ssh user assign Purpose Use the ssh user assign command to assign one existing public key to a user. If a key exists, the new assignment overrides. Use the undo ssh user assign command to delete the association.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh user service-type ● 375 ssh user service-type Purpose Use the ssh user service-type command to specify service type for a user. Use the undo ssh user service-type command to restore the default service type for the SSH user in the system.
376 ● ssh user authentication-type 3Com Router 5000 Family and Router 6000 Family Command Reference ssh user authentication-type Purpose Use the ssh user authentication-type command to create an SSH user and specify an authentication mode for it. Use the undo ssh user authentication-type command to restore the default, where login is always denied.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands: ■ ssh authentication-type default ■ display ssh user-information ssh user authentication-type ● 377
378 ● ssh2 3Com Router 5000 Family and Router 6000 Family Command Reference ssh2 Purpose Use the ssh2 command to initiate a connection to the specified SSH server, and specify the preferred key exchange algorithm, encryption algorithm and HMAC algorithm between the client and the server.
3Com Router 5000 Family and Router 6000 Family Command Reference Example Log into the remote SSH2 server with IP address 10.214.50.
380 ● ssh2 source-interface 3Com Router 5000 Family and Router 6000 Family Command Reference ssh2 source-interface Purpose Use the ssh2 source-interface command to specify a source interface, which must be an existing local interface, for the SSH client. After that, the IP address of the specified interface is used as the source IP address in each packet sent by the SSH client. Use the undo ssh2 source-interface command to delete the source interface specified for the SSH client.
3Com Router 5000 Family and Router 6000 Family Command Reference ssh2 source-ip ● 381 ssh2 source-ip Purpose Use the ssh2 source-ip command to specify a source IP address for the packets sent by the SSH client. This IP address must be a local IP address. Use the undo ssh2 source-ip command to delete the source IP address specified for the SSH client. After that, the source IP address of each packet sent by the SSH client is the IP address of the interface where the packet is sent out.
382 ● standby detect-group 3Com Router 5000 Family and Router 6000 Family Command Reference standby detect-group Purpose Use the standby detect-group command to implement interface backup using the auto detect function. Use the undo standby detect-group command to disable interface backup using the auto detect function.
3Com Router 5000 Family and Router 6000 Family Command Reference startup saved-configuration ● 383 startup saved-configuration Purpose Use the startup saved-configuration command to specify the configuration file used at next startup. Use the undo startup saved-configuration command to configure the system to boot without any configuration file at next startup.
384 ● startup saved-configuration 3Com Router 5000 Family and Router 6000 Family Command Reference The following are how configuration files are selected at boot: 1. If you do not set to skip configuration file at boot, configuration files are selected in the order described in 2) and 3). Otherwise, the system boots with empty configuration. 2. If you specify a configuration file, the system selects its boot configuration file in this order: the specified configuration file and then vrpcfg.def.
3Com Router 5000 Family and Router 6000 Family Command Reference statistics {interval interval | max-group number } ● 385 statistics {interval interval | max-group number } Purpose Use the statistics { interval interval | max-group number } command to configure the statistics interval and the maximum number of the groups of the retained statistics information according to the configuration.
386 ● statistics keep-time 3Com Router 5000 Family and Router 6000 Family Command Reference statistics keep-time Purpose Use the statistics keep-time command to configure the retaining time of the test statistics. Use the undo statistics keep-time command to remove your configuration and restore the default. Syntax statistics keep-time keep-time undo statistics keep-time Parameters keep-time Example Statistics information will be deleted in 180 minutes.
3Com Router 5000 Family and Router 6000 Family Command Reference stopbits ● 387 stopbits Purpose Use the stopbits command to set the stop bits on the user interface. Use the undo stopbits command to restore the default. Syntax stopbits { 1.5 | 1 | 2 } undo stopbits Parameters Example 1.5 1.5 stop bits. 1 1 stop bit (the default). 2 2 stop bits. Use 1.5 stop bits on the user interface. [3Com-ui-vty0] stopbits 1.
388 ● telnet 3Com Router 5000 Family and Router 6000 Family Command Reference telnet Purpose Use the telnet command to telnet from this router to another device. Syntax telnet [ vpn-instance vpn-instance-name ] host-ip-address [ service-port ] Parameters vpn-instance vpn-instance-name Sets the VPN instance name of MPLS VPN. host-ip-address Host name or IP address of the remote device, in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference telnet-server source-interface ● 389 telnet-server source-interface Purpose Use the ftp-server source-interface command to specify a source interface, which must be an existing local interface, for the Telnet server. After that, the IP address of the specified interface is used as the source IP address in each packet sent by the Telnet server.
390 ● telnet-server source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference telnet-server source-ip Purpose Use the telnet-server source-ip command to specify a source IP address for the packets sent by the Telnet server. This IP address must be a local IP address. Use the undo telnet-server source-ip command to delete the source IP address specified for the Telnet server.
3Com Router 5000 Family and Router 6000 Family Command Reference telnet source-interface ● 391 telnet source-interface Purpose Use the telnet source-interface command to telnet from the main IP address of the specified interface to the destination IP address. Syntax telnet ip-address [ port ] source-interface interface-type interface-number Parameters ip-address Destination IP address. port Destination port number. If no value is specified, the default is 23.
392 ● telnet source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference telnet source-ip Purpose Use the telnet source-ip command to telnet from the specified source IP address to the specified destination IP address. Syntax telnet ip-address [ port ] source-ip source-address Parameters ip-address Destination IP address. port Destination port number. If no value is specified, the default is 23. source-address Source IP address used when setting up a Telnet connection.
3Com Router 5000 Family and Router 6000 Family Command Reference terminal debugging ● 393 terminal debugging Purpose Use the terminal debugging command to have the debugging information displayed on the user terminal. Use the undo terminal debugging command to disable the function. Syntax terminal debugging undo terminal debugging Parameters None Default By default, terminal display is disabled. Example Display debugging information on the terminal.
394 ● terminal logging 3Com Router 5000 Family and Router 6000 Family Command Reference terminal logging Purpose Use the terminal logging command to have the log information displayed on the terminal. Use the undo terminal logging command to disable displaying log information on the terminal. Syntax terminal logging undo terminal logging Parameters None Default By default, log information can be displayed on the terminal. Example Disable displaying log information on the terminal.
3Com Router 5000 Family and Router 6000 Family Command Reference terminal monitor ● 395 terminal monitor Purpose Use the terminal monitor command to have the terminal display debugging /log/trap information sent from the info-center. Use the undo terminal monitor command to disable the terminal to display debugging/log/trap information.
396 ● terminal trapping 3Com Router 5000 Family and Router 6000 Family Command Reference terminal trapping Purpose Use the terminal trapping command to have the terminal display trap information. Use the undo terminal trapping command to disable the terminal to display trap information. Syntax terminal trapping undo terminal trapping Parameters None Default By default, the terminal displays trap information. Example Disable the terminal to display trap information.
3Com Router 5000 Family and Router 6000 Family Command Reference test-enable ● 397 test-enable Purpose Use the test-enable command to execute an HWPing test. Use the undo test-enable command to cancel an HWPing test. Syntax test-enable undo test-enable Parameters None Example Execute the HWPing test defined by the test group wgw-testicmp.
398 ● test-failtimes 3Com Router 5000 Family and Router 6000 Family Command Reference test-failtimes Purpose Use the test-failtimes command to configure the number of consecutive test failures allowed before a trap is sent to the NMS. Use the undo test-failtimes command to restore the default. Syntax test-failtimes times undo test-failtimes Parameters times Example Send a trap to the NMS after three consecutive test failures. Number of consecutive test failures allowed. Valid values are 1 to 15.
3Com Router 5000 Family and Router 6000 Family Command Reference test-time begin ● 399 test-time begin Purpose Use the test-time begin command to configure the start time and the lasting time of a test. Use the undo test-time command to stop the test and remove the configuration. Syntax test-time begin { hh:mm :ss [ yyyy/mm/dd ] | now } lifetime lifetime undo test-time Parameters Example hh:mm:ss Test start time. yyyy/mm/dd Test start time. Valid values for yyyy (year) are 2000 to 2099.
400 ● test-type 3Com Router 5000 Family and Router 6000 Family Command Reference test-type Purpose Use the test-type command to configure the type of the test. Syntax test-type type [codec codec-value] Parameters test-type Test type, which can be one of the following keywords: ■ dhcp: DHCP test. ■ dlsw: DLSw test. ■ ftp: FTP connection test. ■ http: HTTP connection test. ■ icmp: ICMP test, which is the default test type.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp ● 401 tftp Purpose Use the tftp command to upload or download a file through TFTP. Syntax tftp ip-address { get | sget | put } source-filename [ destination-filename ] Parameters ip-address IP address of the TFTP server. source-filename Source file name. destination-filename Target file name. get Downloads the file without protection.
402 ● tftp host source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference tftp host source-ip Purpose Use the tftp host source-ip command to specify the source IP address that the TFTP client uses when accessing the specified TFTP server. This source IP address must be a local address. Syntax tftp host source-ip ip-address Parameters host IP address or name of a TFTP server. ip-address Source IP address.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp host source-interface ● 403 tftp host source-interface Purpose Use the tftp host source-interface command to specify the source interface that the TFTP client uses when accessing the specified TFTP server. Syntax tftp host source-interface interface-type interface-number Parameters host IP address or name of a TFTP server. interface-type interface-number Specifies a source interface by its type and number.
404 ● tftp hostname vpn-instance 3Com Router 5000 Family and Router 6000 Family Command Reference tftp hostname vpn-instance Purpose Use the tftp hostname vpn-instance to adopt VPN instance mode to access TFTP server and upload and download files. Syntax tftp hostname vpn-instance vpn-instance-name source-ip ip-address { get | put | sget } source-filename [ destination-filename ] Parameters hostname Name of TFTP Server or IP address. vpn-instance-name Name of VPN instance.
3Com Router 5000 Family and Router 6000 Family Command Reference Description tftp hostname vpn-instance ● 405 Follow these rules when executing this command: ■ VPN instance name must exist and be correct. ■ The specified source IP address must be the IP address of the router. ■ The specified VPN instance name must match the source IP address.
406 ● tftp-server acl 3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server acl Purpose Use the tftp-server acl command to reference an ACL to control access to the TFTP server. Syntax tftp-server acl acl-number Parameters acl-number Example Reference ACL 2001 to control access to the TFTP server. IP ACL number. Valid values are 2000 to 2999.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server directory ● 407 tftp-server directory Purpose Use the tftp-server directory command to configure the directory TFTP Client can access. Use the undo tftp-server directory command to restore the default directory. Syntax tftp-server directory directory undo tftp-server directory Parameters directory Example Configure the directory TFTP client can access to flash:/object.
408 ● tftp-server enable 3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server enable Purpose Use the tftp-server enable command to enable TFTP Server. Use the undo tftp-server enable command to disable TFTP Server. Syntax tftp-server enable undo tftp-server enable Parameters None Default By default, TFTP server is disabled. Example Enable TFTP server. [Router] tftp-server enable % Start TFTP Server Disable TFTP server.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server retry-times ● 409 tftp-server retry-times Purpose Use the tftp-server retry-times command to configure maximum number of retry times for TFTP server timeout retransmission. Use the undo tftp-server retry-times command to restore the default. Syntax tftp-server retry-times times undo tftp-server retry-times Parameters times Example Configure maximum number of retry times for TFTP server timeout retransmission.
410 ● tftp-server max-users 3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server max-users Purpose Use the tftp-server max-users command to maximum number of concurrent users that are allowed to access TFTP server. Use the undo tftp-server max-users command to restore to the default. Syntax tftp-server max-users number undo tftp-server max-users Parameters number Default By default, concurrent access of multiple users to TFTP server is not supported.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server timeout ● 411 tftp-server timeout Purpose Use the tftp-server timeout command to configure UDP packet response timeout time for TFTP server. Use the undo tftp-server timeout command to restore the default. Syntax tftp-server timeout seconds undo tftp-server timeout Parameters seconds Example Configure UDP packet response timeout time for TFTP server to 10 seconds. Response timeout time for a UDP packet (in seconds).
412 ● tftp-server update 3Com Router 5000 Family and Router 6000 Family Command Reference tftp-server update Purpose Use the tftp-server update command to set the file update mode that the FTP server uses while receiving data. Use the undo tftp-server update command to restore the default, or fast mode. Syntax tftp-server update { fast | normal } undo tftp-server update Parameters Example fast Fast update mode. normal Normal update mode. Set the FTP update mode to fast.
3Com Router 5000 Family and Router 6000 Family Command Reference tftp source-interface ● 413 tftp source-interface Purpose Use the ftp source-interface command to specify a source interface, which must be an existing local interface, for the TFTP client. Use the undo ftp source-interface command to delete the source interface specified for the TFTP client.
414 ● tftp source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference tftp source-ip Purpose Use the ftp source-ip command to specify a source IP address for the packets sent by the TFTP client. Use the undo ftp source-ip command to delete the source IP address specified for the TFTP client.
3Com Router 5000 Family and Router 6000 Family Command Reference timeout ● 415 timeout Purpose Use the timeout command to configure a timeout time for a test. Use the undo timeout command to restore the default. Syntax timeout time undo timeout Parameters time Example Set the timeout time to 10 seconds. Timeout time (in seconds). Valid values are 1 to 60. It no value is specified, the default is three seconds. For a Jitter test, the default is five seconds.
416 ● timer loop 3Com Router 5000 Family and Router 6000 Family Command Reference timer loop Purpose Use the timer loop command to set the auto detect interval, that is, the frequency for auto detect. Use the undo timer loop command to restore the default auto detect interval. Syntax timer loop seconds undo timer loop Parameters seconds Example Set the detect interval of detect group 10 to 60 seconds. Auto detect interval (in seconds). Valid values are 1 to 86,400.
3Com Router 5000 Family and Router 6000 Family Command Reference timer wait ● 417 timer wait Purpose Use the timer wait command to set a timeout period for a probing attempt. Use the undo timer wait command to restore the default timeout period for a probing attempt. Syntax timer wait seconds undo timer wait Parameters seconds Example Set the probing attempt timeout period to three seconds for detect group 3. Timeout time for a probing attempt (in seconds). Valid values are 1 to 30.
418 ● tos 3Com Router 5000 Family and Router 6000 Family Command Reference tos Purpose Use the tos command to assign a value to the ToS field in the header of HWPing test packets. Use the undo tos command to cancel the ToS value configuration. Syntax tos value undo tos Parameters value Example Set the ToS field in the header of HWPing packets to one. ToS field in the header of HWPing test packets.Valid values are 0 to 255. If no value is specified, the default ToS field is not set.
3Com Router 5000 Family and Router 6000 Family Command Reference tracert ● 419 tracert Purpose Use the tracert command to trace the gateways by which a packet passes from source to destination for network connectivity test and fault location. Syntax tracert [ -a X.X.X.X | -f first_TTL | -m max_TTL | -p port | -q nqueries | vpn-instance vpn-instance-name | -w timeout ] * host Parameters -a X.X.X.X Specifies the source IP address in this trace. It is in the format of X.X.X.
420 ● tracert 3Com Router 5000 Family and Router 6000 Family Command Reference Example <3Com> tracert 18.26.0.115 tracert to allspice.lcs.mit.edu (18.26.0.115), 30 hops max 1 helios.ee.lbl.gov (128.3.112.1) 0 ms 0 ms 0 ms 2 lilac-dmc.Berkeley.EDU (128.32.216.1) 19 ms 19 ms 19 ms 3 lilac-dmc.Berkeley.EDU (128.32.216.1) 39 ms 19 ms 19 ms 4 ccngw-ner-cc.Berkeley.EDU (128.32.136.23) 19 ms 39 ms 39 ms 5 ccn-nerif22.Berkeley.EDU (128.32.168.22) 20 ms 39 ms 39 ms 6 128.32.197.4 (128.32.197.
3Com Router 5000 Family and Router 6000 Family Command Reference ttl ● 421 ttl Purpose Use the ttl command to configure TTL of ICMP test packets. Use the undo ttl command to restore the default TTL of ICMP test packets. Syntax ttl number undo ttl Parameters number Example Set the TTL of HWPing ICMP test packets to 16. Time to live (TTL) value or lifetime of HWPing ICMP test packets. Valid values are 1 to 255. If no value is specified, the default is 255.
422 ● undelete 3Com Router 5000 Family and Router 6000 Family Command Reference undelete Purpose Use the undelete command to restore a file from the recycle bin. Syntax undelete filename Parameters filename Example <3Com> dir /all Directory of flash:/ 0 -rw595 Jul 12 2001 20:13:19 1 -rw50 Jul 12 2001 20:09:23 6477 KBytes total (2144 KBytes free) Name of the file to be restored. vrpcfg.cfg [sample.bak] Restore file sample.bak from the recycle bin. <3Com> undelete sample.
3Com Router 5000 Family and Router 6000 Family Command Reference undo schedule reboot ● 423 undo schedule reboot Purpose Use the undo schedule reboot command to cancel the configuration of the schedule reboot terminal service. Syntax undo schedule reboot Parameters None Example Disable the scheduled reboot function.
424 ● upgrade 3Com Router 5000 Family and Router 6000 Family Command Reference upgrade Purpose Use the upgrade command to upgrade the Boot ROM. Syntax upgrade bootrom [ full ] Parameters bootrom Upgrades the Boot ROM. full Upgrades the entire Boot ROM. Example Upgrade the Boot ROM on the R1760, provided the upgrade software package is stored under the root directory on the Flash memory and the file name is “bootromfull”.
3Com Router 5000 Family and Router 6000 Family Command Reference upgrade ● 425 upgrade Purpose Use the upgrade command to upgrade the Boot ROM program, pico-code or the logic. Syntax upgrade [ bootrom | pico-code] filename Parameters bootrom Upgrades the Boot ROM in service. pico-code Upgrades the pico-code in service. filename File name of the upgrade software package. Example Upgrade the pico-code in service using the file named filename.
426 ● user 3Com Router 5000 Family and Router 6000 Family Command Reference user Purpose Use the user command to register an FTP user. Syntax user username [ password ] Parameters username Login username. password Login password. Example Log onto the FTP server with the username tom and the password bjhw.
3Com Router 5000 Family and Router 6000 Family Command Reference user-interface ● 427 user-interface Purpose Use the user-interface command to enter single-user interface view or multi-user interface view. Syntax user-interface [ type-keyword ] number [ ending-number ] Parameters type-keyword User interface type. number The first user interface to be configured. ending-number The last user interface to be configured. Example Enter the view of the console 0 user interface.
428 ● user privilege 3Com Router 5000 Family and Router 6000 Family Command Reference user privilege Purpose Use the user privilege command to configure the command level that the login users on the current user interface can access. Use the undo user privilege command to cancel the current setting. Syntax user privilege level level undo user privilege level Parameters level Default By default, the default command level is three for the console user interface and zero for other user interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference username ● 429 username Purpose Use the username command to configure a name used for logging onto the FTP server. Use the undo username command to cancel the username configuration. Syntax username name undo username Parameters name Default By default, no username is configured for logging onto the FTP server. Example Use administrator as the username for logging onto the FTP server. User name used for logging onto the FTP server.
430 ● verbose 3Com Router 5000 Family and Router 6000 Family Command Reference verbose Purpose Use the verbose command to enable the verbose function to view information from the FTP server. Use the undo verbose command to disable the verbose function. Syntax verbose undo verbose Parameters None Default By default, the verbose function is disabled. Example Enable the verbose function.
3Com Router 5000 Family and Router 6000 Family Command Reference vfs check check-method discard ● 431 vfs check check-method discard Purpose Use the vfs check check-method discard command to specify the file discarding method to be the file system check method. Use the undo vfs check check-method discard command to cancel file discarding when the system checks the file system.
432 ● vfs check check-method discard auto 3Com Router 5000 Family and Router 6000 Family Command Reference vfs check check-method discard auto Purpose Use the vfs check check-method discard auto command to specify to discard the contents of corrupted files and then recycle the corresponding storage space automatically. Use the undo vfs check check-method discard auto command to disable the function.
3Com Router 5000 Family and Router 6000 Family Command Reference vfs check check-method fix ● 433 vfs check check-method fix Purpose Use the vfs check check-method fix command to set the file check method to automatic file fixing. Use the undo vfs check check-method fix command to cancel automatic file fixing when the system checks the file system. Syntax vfs check check-method fix undo vfs check check-method fix Parameters None Example Specify automatic file fixing method.
434 ● vfs check file-system 3Com Router 5000 Family and Router 6000 Family Command Reference vfs check file-system Purpose Use the vfs check file-system command to check the file system. At present, the system can check corrupted files and perform operations such as file fixing/discarding and space recycling. Syntax vfs check file-system Parameters None Default By default, file system checking only fixes files. Example Check the file system.
3Com Router 5000 Family and Router 6000 Family Command Reference vpinstance ● 435 vpinstance Purpose Use the vpninstance command to specify a VPN instance. Use the undo vpninstance command to remove the specified VPN instance. Syntax vpninstance name undo vpninstance Parameters name Default By default, no VPN instance information is configured. Example Specify the VPN instance named vpn1. VPN instance name. Valid values are any string from 1 to 19 characters long.
3Com Router 5000 Family and Router 6000 Family Command Reference x29 timer idleclear ● 437 x29 timer idleclear Purpose Use the x29 timer idleclear command to set the idle-clear timer for PAD connection. Use the undo x29 timer idleclear command to restore the default. Syntax x29 timer idleclear idle-time undo x29 timer idleclear Parameters idle-time: Example Set the timeout period of PAD connections to 600 seconds. Idle-clear timer setting for PAD connection. Valid values are 0 to 600 seconds.
438 ● xmodem get 3Com Router 5000 Family and Router 6000 Family Command Reference xmodem get Purpose Use the xmodem get command to download a file by using Xmodem through the AUX port. VRP supports 128-byte packets and CRC check. Syntax xmodem get filename Parameters filename Example Download a file with Xmodem through the AUX port and assign the name test.txt to the file to be saved to Flash. Name of the file to be saved to Flash. It must be an absolute file path. <3Com> xmodem get flash:/test.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 INTERFACE ALPHABETICAL LISTING OF COMMANDS activate 7 activate 8 adsl standard 9 adsl tx_attenuation 11 ahdsl annex 12 alarm (CT3 Interface) 13 alarm-threshold 15 async mode 17 baudrate 18 bert (CT1/PRI Interface) 20 bert (CT3 Interface) 21 broadcast-limit link 23 broadcast suppression 24 cable 25 cable 26 cable 27 cable (CT1/PRI Interface) 28 cable (CT1/PRI Interface) 29 cable (CT3 Interface) 30 channel-set (CE1/PRI Interface) 31 channe
2● 3Com Router 5000 Family and Router 6000 Family Command Reference crc 59 crc 60 crc 61 ct1 alarm 62 data-coding (CT1/PRI Interface) 64 data-coding (CT1/PRI Interface) 65 debugging physical 66 description 67 description 68 detect 69 detect-ais (CE1/PRI Interface) 70 detect-ais (CE1/PRI Interface) 71 detect-ais (CE1/PRI Interface) 72 detect-ais (CE1/PRI Interface) 73 differential-delay 74 display brief interface 75 display controller cpos 76 display controller cpos e1 79 display controller cpos t1 81 disp
3Com Router 5000 Family and Router 6000 Family Command Reference display vlan interface 142 display vlan max-packet-process 143 display vlan max-packet-process 144 display vlan statistics vid 145 display vlan statistics vid 146 dsl link-check 147 duplex 148 duplex 149 e1 channel-set 150 e1 channel-set 151 e1 set loopback 153 e1 set clock 154 e1 set clock 155 e1 set frame-format 156 e1 set frame-format 157 e1 set loopback 158 e1 shutdown 159 e1 shutdown 160 e1 unframed 161 e1 unframed 162 eliminate-pulse 16
4● 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format 198 frame-format 199 frame-format (CE1/PRI Interface) 200 frame-format (CE1/PRI Interface) 201 frame-format (CT1/PRI Interface) 202 frame-format (CT1/PRI Interface) 203 frame-format (CT3 Interface) 204 frame-length 205 framefill none 206 idlecode (CE1/PRI Interface) 207 idlecode (CE1/PRI Interface) 208 idlecode (CE1/PRI Interface) 209 idlecode (CE1/PRI Interface) 210 idlecode (CE1/PRI Interface) 211 idlecode (CT1/PRI Interfac
3Com Router 5000 Family and Router 6000 Family Command Reference loopback (CT3 Interface) 251 loopback (Ethernet/GE Interface) 252 loopback (ISDN BRI Interface) 253 looptest 254 mac-address 256 mac-address timer aging 257 max-packet-process 258 mdl (CT3 Interface) 259 min-active-links 261 modem adapt no-waiting-connect 262 mtu (ATM Interface) 263 mtu (Ethernet/GE Interface) 264 mtu (POS Interface) 265 mtu (serial interface) 266 mtu (serial interface) 267 multiplex mode 268 national-bit 269 osm connect slot
6● 3Com Router 5000 Family and Router 6000 Family Command Reference shutdown 307 speed 308 speed 309 sync-clock enable 310 sync-clock interval 311 t1 bert 312 t1 channel set 314 t1 channel-set 315 t1 set clock 316 t1 set clock 317 t1 set fdl 318 t1 set frame-format 319 t1 set frame-format 320 t1 set loopback 321 t1 set loopback 322 t1 sendloopcode 323 t1 show 325 t1 shutdown 327 t1 shutdown 328 t1 unframed 329 t1 unframed 330 upgrade flash 331 using (CE1/PRI Interface) 332 using (CE3 Interface) 333 using
3Com Router 5000 Family and Router 6000 Family Command Reference activate ● 7 activate Purpose Use the activate command to activate the ADSL interface. Use the undo activate command to deactivate the ADSL interface. Syntax activate undo activate Parameters None Default By default, the ADSL interface is active. Example Deactivate the ADSL interface.
8 ● activate 3Com Router 5000 Family and Router 6000 Family Command Reference activate Purpose Use the activate command to enable the G.SHDSL interface. Use the undo activate command to disable the G.SHDSL interface. Syntax activate undo activate Parameters None Default By default, the G.SHDSL interface is active. Example Deactivate the G.SHDSL interface. [3Com -Atm3/0/0] undo activatepurpose_body View This command can be used in the following views: ■ Description ATM (G.
3Com Router 5000 Family and Router 6000 Family Command Reference adsl standard ● 9 adsl standard Purpose Use the adsl standard command to set the standard applied to the ADSL interface. Use the undo adsl standard command to restore the default. Syntax adsl standard { auto | gdmt | glite | t1413 | g9923 | g9925 } undo adsl standard Parameters Example auto Auto-sensing mode, which is the default. gdmt G.DMT (G992.1) standard. glite G.Lite (G992.2) standard. t1413 T1.413 standard.
10 ● adsl standard 3Com Router 5000 Family and Router 6000 Family Command Reference 060: e d e d e d c d d e d d e c 070: d d e d d d d e d d d c d d 080: d d c d d d d d c d d d d c 090: d c d c d c c d c c d c d c 0a0: c d c c c d c c c d c c c d 0b0: c d c c c c d c c c c c d c 0c0: c c c c c c c c c c c b c c 0d0: c b c b c b c b c b c b c b 0e0: b c 2 b c b a b a a b a a b 0f0: b a a b a a a a a a a 9 9 9 8 0 View d e c c c c c c a This command can be used in the following views: ■ Description d
3Com Router 5000 Family and Router 6000 Family Command Reference adsl tx_attenuation ● 11 adsl tx_attenuation Purpose Use the adsl tx_attenuation command to set attenuation value for ADSL transmit power. Use the undo adsl tx_attenuation command to restore the default value.
12 ● ahdsl annex 3Com Router 5000 Family and Router 6000 Family Command Reference ahdsl annex Purpose Use the shdsl annex command to configure annex standard at an SHDSL interface. You cannot activate a link with different standard types at its two ends. Use the undo shdsl annex command to restore the default standard. Syntax shdsl annex { a | b } undo shdsl annex Parameters Example a Annex a. b Annex b, which is the default. Restore the default standard type on the SHDSL interface.
3Com Router 5000 Family and Router 6000 Family Command Reference alarm (CT3 Interface) ● 13 alarm (CT3 Interface) Purpose Use the alarm command to enable the CT3 interface to detect/send alarm signals. Use the undo alarm command to cancel the alarm signal detection/sending setting. Syntax alarm { detect | generate { ais | rai | idle | febe } } undo alarm { detect | generate { ais | rai | idle | febe } } Parameters Example detect Enables/disables periodical alarm signal detection.
14 ● alarm (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference the LOS, LOF, or AIS signal is present, the CT3 interface cannot send another type of signal. To do that, use the undo alarm detect command to disable the CT3 interface to send the RAI signal generated after detecting an alarm first.
3Com Router 5000 Family and Router 6000 Family Command Reference alarm-threshold ● 15 alarm-threshold Purpose Use the alarm-threshold command to configure the alarm thresholds on the CT1/PRI interface as needed. Use the undo alarm-threshold command to restore the default alarm threshold values.
16 ● alarm-threshold 3Com Router 5000 Family and Router 6000 Family Command Reference By default, level-1 LFA alarm threshold applies. Example Set the number of detection intervals to 300 for the pulse detection duration threshold.
3Com Router 5000 Family and Router 6000 Family Command Reference async mode ● 17 async mode Purpose Use the async mode command to set the operating mode of the asynchronous serial interface. Syntax async mode { protocol | flow | terminal template-name tty-number } Parameters protocol Protocol mode, with which the local end directly adopts the configured link layer protocol parameters to set up a link with the remote end after setting up a physical link.
18 ● baudrate 3Com Router 5000 Family and Router 6000 Family Command Reference baudrate Purpose Use the baudrate command to set the baud rate of a serial interface. Syntax baudrate baudrate Parameters baudrate Default By default, the baud rate is 9,600 bps on the asynchronous serial interface and 64,000 bps on a synchronous serial interface. Example Set the baud rate of the asynchronous serial interface at DCE side to 115200 bps. Baud rate of the serial interface (in bps).
3Com Router 5000 Family and Router 6000 Family Command Reference baudrate ● 19 After a synchronous/asynchronous serial interface makes the synchronous/asynchronous switchover, the baud rate of the interface resumes the default baud rate in the new operating mode. When setting baud rate for a serial interface, you should take into consideration the elements such as operating mode (synchronous/asynchronous mode) and the electric specifications of the connected external cable.
20 ● bert (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference bert (CT1/PRI Interface) Purpose Use the bert command to start a BERT test on the CT1/PRI interface. Use the undo bert command to stop the BERT test running on the CT1/PRI interface. Syntax bert pattern { 2^15 | 2^20 } time minutes [ unframed ] undo bert Parameters Example pattern Sets a bit error rate test (BERT) pattern, which could be 2^15 or 2^20.
3Com Router 5000 Family and Router 6000 Family Command Reference bert (CT3 Interface) ● 21 bert (CT3 Interface) Purpose Use the bert command to start a BERT test on the CT3 interface. Use the undo bert command to stop the BERT test running on the CT3 interface. Syntax bert pattern { 2^7 | 2^11 | 2^15 | qrss } time number [ unframed ] undo bert Parameters Example pattern Sets a bit error rate test (BERT) pattern, which could be 2^7, 2^11, 2^15, or QRSS.
22 ● bert (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference received pattern for the bit error rate, and by so doing helps you determine whether the condition of the line is good. To this end, you must configure loopback to allow the transmitted pattern to loop back from somewhere on the line, for example, from the far-end interface by placing the interface in far-end loopback. You may view the state and result of the BERT test with the display controller t3 command.
3Com Router 5000 Family and Router 6000 Family Command Reference broadcast-limit link ● 23 broadcast-limit link Purpose Use the broadcast-limit link command to configure the maximum number of links that the virtual template supports for sending multicast or broadcast packets. Use the undo broadcast-limit link command to restore the default.
24 ● broadcast suppression 3Com Router 5000 Family and Router 6000 Family Command Reference broadcast suppression Purpose Use the broadcast-suppression command to restrict the broadcast traffic size on the port. Use the undo broadcast-suppression command to restore the default (100), allowing all broadcast traffic to pass through without broadcast suppression.
3Com Router 5000 Family and Router 6000 Family Command Reference cable ● 25 cable Purpose Use the cable command to set the cable length matching the CE1/PRI interface. Use the undo cable command to restore the default. Syntax cable { long | short } undo cable Parameters long The attenuation of the receiver is -43 dB short The attenuation of the receiver is -10 dB. Default By default, the long parameter applies. Example Set the cable length matching the CE1/PRI interface to short.
26 ● cable 3Com Router 5000 Family and Router 6000 Family Command Reference cable Purpose Use the cable command to set the cable length of the ATM E1 interface. Use the undo cable command to restore the default, that is, long haul mode. In this mode, the system can automatically adjust long haul mode and short haul mode. Syntax cable { long | short } undo cable Parameters Example long Long haul mode, with a cable length in the range 151 to 500 meters or 495 to 1640 feet.
3Com Router 5000 Family and Router 6000 Family Command Reference cable ● 27 cable Purpose Use the cable command to configure the cable mode of ATM T3 cable, i.e., to set the distance between the router and the cable distribution frame. Use the undo cable command to restore the default. Syntax cable { long | short } undo cable Parameters long Long distance mode. Long cable length ranges from 151 to 500 meters. short Short distance mode. Short cable length ranges from 0 to 150 meters.
28 ● cable (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference cable (CT1/PRI Interface) Purpose Use the cable command to set cable attenuation and length on a CT1/PRI interface to match the distance of the transmission line. Use the undo cable command to restore the default or long 0db. Syntax cable { long { 0db | -7.5db | -15db | -22.
3Com Router 5000 Family and Router 6000 Family Command Reference cable (CT1/PRI Interface) ● 29 cable (CT1/PRI Interface) Purpose Use the cable command to set cable attenuation and length on a CT1/PRI interface to match the distance of the transmission line. Use the undo cable command to restore the default or long 0db. Syntax cable { long { 0db | -7.5db | -15db | -22.
30 ● cable (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference cable (CT3 Interface) Purpose Use the cable command to configure the length of the cable with which a CT3 interface is connected. Use the undo cable command to restore the default length of the cable with which the CT3 interface is connected. Syntax cable feet undo cable Parameters feet Example Set the cable length to 50 feet on the interface T3 1/0/0. Cable length. Valid values are 0 to 450 feet.
3Com Router 5000 Family and Router 6000 Family Command Reference channel-set (CE1/PRI Interface) ● 31 channel-set (CE1/PRI Interface) Purpose Use the channel-set command to bundle some timeslots of a CE1/PRI interface into a channel-set. Use the undo channel-set command to remove the specified timeslot bundle. Syntax channel-set set-number timeslot-list range undo channel-set set-number Parameters set-number The number of the channel set formed by bundling the timeslots on the interface.
32 ● channel-set (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference The serial interface is numbered in the form of serial interface-number :set-number. Where, interface-number is the number of the CE1/PRI interface, and set-number is the number of the channel-set. Only one timeslot bundling mode can be supported on one CE1/PRI interface at a time. In other words, this command cannot be used together with the pri-set command.
3Com Router 5000 Family and Router 6000 Family Command Reference channel-set (CT1/PRI Interface) ● 33 channel-set (CT1/PRI Interface) Purpose Use the channel-set command to bundle timeslots on the CT1/PRI interface into a channel-set. Use the undo channel-set command to remove the specified channel-set. Syntax channel-set set-number timeslot-list range [ speed { 56k | 64k } ] undo channel-set set-number Parameters set-number The number of the channel-set formed by timeslot bundling on the interface.
34 ● channel-set (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference maximum serial interface number plus 1, and set-number is the number of the channel-set. Only one timeslot bundling mode is supported on a CT1/PRI interface at a time. In other words, you cannot use this command together with the pri-set command.
3Com Router 5000 Family and Router 6000 Family Command Reference channel-set (CT1/PRI Interface) ● 35 channel-set (CT1/PRI Interface) Purpose Use the channel-set command to bundle timeslots on the CT1/PRI interface into a channel-set. Use the undo channel-set command to remove the specified channel-set. Syntax channel-set set-number timeslot-list range [ speed { 56k | 64k } ] undo channel-set set-number Parameters set-number The number of the channel-set formed by timeslot bundling on the interface.
36 ● channel-set (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference Only one timeslot bundling mode is supported on a CT1/PRI interface at a time. In other words, you cannot use this command together with the pri-set command.
3Com Router 5000 Family and Router 6000 Family Command Reference clock ● 37 clock Purpose Use the clock command to set the clock mode of the ATM E1/T1 interface. Use the undo clock command to restore the default clock mode, that is, slave. Syntax clock { master | slave } undo clock Parameters Example master Sets the clock mode of the ATM E1/T1 interface to master. slave Sets the clock mode of the ATM E1/T1 interface to slave. Set the clock mode of ATM E1/T1 interface 1/0/1 to master.
38 ● clock 3Com Router 5000 Family and Router 6000 Family Command Reference clock Purpose Use the clock command to set the clock mode of the CPOS interface. Use the undo clock command to restore the default or slave clock. Syntax clock { master | slave } undo clock Parameters Example master Sets the clock mode of the CPOS interface to master. slave Sets the clock mode of the CPOS interface to slave. Set the clock mode of CPOS 1/0/0 to master.
3Com Router 5000 Family and Router 6000 Family Command Reference clock ● 39 clock Purpose Use the clock command to set the clock mode of ATM E3/T3 interface. Use the undo clock command to restore the default setting. Syntax clock { master | slave } undo clock Parameters master Sets the clock mode of ATM E3/T3 to master mode. slave Sets the clock mode of ATM E3/T3 to slave mode. Default By default, the clock mode of ATM E3/T3 interface is slave mode.
40 ● clock 3Com Router 5000 Family and Router 6000 Family Command Reference clock Purpose Use the clock command to set the clock mode on an ATM interface. Use the undo clock command to restore the default clock mode on the interface. Syntax clock { master | slave } undo clock Parameters master Adopts the internal clock mode. slave Adopts the line clock mode. Default By default, the ATM interface adopts the slave clock. Example Adopt the master clock on the ATM interface 4/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference clock ● 41 clock Purpose Use the clock command to set the clock mode of the POS interface. Use the undo clock command to restore the default, slave. Syntax clock { master | slave } undo clock Parameters Example master Sets the clock mode of the POS interface to master. slave Sets the clock mode of the POS interface to slave. Set the clock mode of the interface POS 1/0/0 to master.
42 ● clock 3Com Router 5000 Family and Router 6000 Family Command Reference clock Purpose Use the clock command to set the clock mode on the ATM interface. Use the undo clock command to restore the default or slave. Syntax clock { master | slave } undo clock Parameters Example master Adopts the internal clock mode. slave Adopts the line clock mode. Adopt the master clock on the ATM interface 4/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference clock (CE1/PRI Interface) ● 43 clock (CE1/PRI Interface) Purpose Use the clock command to set the clock mode on a CE1/PRI interface. Use the undo clock command to restore the default clock mode on the interface. Syntax clock { master | slave } undo clock Parameters master Adopts the internal clock mode. slave Adopts the line clock mode. Default By default, the CE1/PRI interface adopts the line clock mode (slave).
44 ● clock (CE3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference clock (CE3 Interface) Purpose Use the clock command to set the clock mode on the CE3 interface. Use the undo clock command to restore the default or slave. Syntax clock { master | slave } undo clock Parameters Example master Adopts the internal clock mode. slave Adopts the line clock mode. Sets the clock on the CE3 interface to internal.
3Com Router 5000 Family and Router 6000 Family Command Reference clock (CT3 Interface) ● 45 clock (CT3 Interface) Purpose Use the clock command to set the clock mode on the CT3 interface. Use the undo clock command to restore the default clock mode or slave. Syntax clock { master | slave } undo clock Parameters Example master Internal clock. slave Line clock. Configure the CT3 interface with internal clock.
46 ● clock (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference clock (CT1/PRI Interface) Purpose Use the clock command to set clocking on the CT1/PRI interface. Use the undo clock command to restore the default or slave, the line clock. Syntax clock { master | slave } undo clock Parameters Example master Adopts the internal clock. slave Adopts the line clock. Set the clock of the CT1/PRI interface to internal (master).
3Com Router 5000 Family and Router 6000 Family Command Reference code (CT1/PRI Interface) ● 47 code (CT1/PRI Interface) Purpose Use the code command to set the line code format on the CT1/PRI interface. Use the undo code command to restore the default or b8zs. Syntax code { ami | b8zs } undo code Parameters Example ami AMI line code format. b8zs Bipolar with 8-zero substitution (b8zs) line code format. Set the line code format of the interface T1 1/0/0 to ami.
48 ● clock (Serial Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference clock (Serial Interface) Purpose Use the clock command to set clock selection mode for a synchronous serial interface. Syntax clock { dteclk1 | dteclk2 | dteclk3 | dteclk4 } Parameters dteclk1 Sets the interface clock selection mode to DTE clock option 1. dteclk2 Sets the interface clock selection mode to DTE clock option 2. dteclk3 Sets the interface clock selection mode to DTE clock option 3.
3Com Router 5000 Family and Router 6000 Family Command Reference clock (Serial Interface) ● 49 Working as DTE, the synchronous serial interface must accept the clock provided by the remote DCE. As transmitting and receiving clocks of synchronization devices are independent, the receiving clock of a DTE device can be either the transmitting or receiving clock of the DCE device. So is the transmitting clock. Therefore, there are four clock options are available for a DTE device.
50 ● code (CEI/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference code (CEI/PRI Interface) Purpose Use the code command to set the line code format for a CE1/PRI interface. Use the undo code command to restore the default line code format of the interface. Syntax code { ami | hdb3 } undo code Parameters ami Adopts alternate mark inversion (AMI) line code format. hdb3 Adopts high density bipolar 3 (HDB3) line code format.
3Com Router 5000 Family and Router 6000 Family Command Reference code nrzi ● 51 code nrzi Purpose Use the code nrzi command to set the digital signal coding format to None-Return-to-Zero-Inverse (NRZI) for a synchronous serial interface. Use the undo code command to restore the digital coding format of the synchronous serial interface to NRZ. Syntax code nrzi undo code Parameters None Default The digital signal coding format defaults to NRZ on the synchronous serial interface.
52 ● controller cpos 3Com Router 5000 Family and Router 6000 Family Command Reference controller cpos Purpose Use the controller cpos command to enter CPOS interface view. Syntax controller cpos cpos-number Parameters cpos-number Example Enter the interface view of CPOS 1/0/0. CPOS interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference controller e1 ● 53 controller e1 Purpose Use the controller e1 command to enter CE1/PRI interface view. Syntax controller e1 number Parameters number Example Enter the view of the interface E1 3/0/0. CE1/PRI interface number.
54 ● controller e3 3Com Router 5000 Family and Router 6000 Family Command Reference controller e3 Purpose Use the controller e3 command to enter the CE3 interface view. Syntax controller e3 interface-number Parameters interface-number Example Enter the view of the interface E3 1/0/0. CE3 interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference controller t1 ● 55 controller t1 Purpose Use the controller t1 command to enter a CT1/PRI interface view. Syntax controller t1 number Parameters number Example Enter the view of the interface T1 1/0/0. CT1/PRI interface number.
56 ● controller t3 3Com Router 5000 Family and Router 6000 Family Command Reference controller t3 Purpose Use the controller t3 command to enter the CT3 interface view. Syntax controller t3 interface-number Parameters interface-number Example Enter the view of the interface T3 1/0/0. CT3 interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference country-code ● 57 country-code Purpose Use the country-code command to configure the coding format of the modem connected to the serial interface. Syntax country-code area-name Parameters area-name Default The default area code is United-States. Example Set the area-code to China.
58 ● crc 3Com Router 5000 Family and Router 6000 Family Command Reference crc Purpose Use the crc command to configure CRC mode of the serial interface formed by CT3. Use the undo crc command to restore the default or 16-bit CRC. Syntax crc { 16 | 32 | none } undo crc Parameters Example 16 Adopts 16-bit CRC. 32 Adopts 32-bit CRC. none Adopts no CRC. Apply 32-bit CRC to the serial interface formed by the interface T3 1/0/0 in fractional mode.
3Com Router 5000 Family and Router 6000 Family Command Reference crc ● 59 crc Purpose Use the crc command to set the CRC length on the POS interface. Use the undo crc command to restore the default setting, 32 bits. Syntax crc { 16 | 32 } undo crc Parameters Example 16 Sets CRC length to 16 bits. 32 Sets CRC length to 32 bits. This is the default value for CRC length. Set the CRC length on the interface POS 1/0/0 to 16 bits.
60 ● crc 3Com Router 5000 Family and Router 6000 Family Command Reference crc Purpose Use the crc command to configure CRC mode of the serial interface formed by CE3. Use the undo crc command to restore the default or 16-bit CRC. Syntax crc { 16 | 32 | none } undo crc Parameters Example 16 Adopts 16-bit CRC. 32 Adopts 32-bit CRC. none Adopts no CRC. Apply 32-bit CRC to the serial interface formed by the interface E3 2/0/0 in fractional mode.
3Com Router 5000 Family and Router 6000 Family Command Reference crc ● 61 crc Purpose Use the crc command to configure CRC mode of the serial interface formed by CE1. Use the undo crc command to restore the default configuration. Syntax crc { 16 | 32 | none} undo crc Parameters 16 Adopts 16-bit CRC. 32 Adopts 32-bit CRC. none Adopts no CRC. Default By default, 16-bit CRC is adopted. Example Apply 32-bit CRC to the serial interface formed by the interface E1 2/0/0 in fractional mode.
62 ● ct1 alarm 3Com Router 5000 Family and Router 6000 Family Command Reference ct1 alarm Purpose Use the t1 alarm command to enable the specified T1 line on the CT3 interface to detect/send alarm signals. Use the undo t1 alarm command to remove the alarm signal detection/sending setting. Syntax t1 line-number alarm { detect | generate { ais | rai } } undo t1 line-number alarm { detect | generate { ais | rai } } Parameters Example line-number T1 line number. Valid values are 1 to 28.
3Com Router 5000 Family and Router 6000 Family Command Reference ct1 alarm ● 63 previous setting first. In addition, when the RAI signal generated upon detection of the LOS, LOF, or AIS signal is present, the T1 line cannot send another type of signal. To do that, use the undo t1 alarm detect command to disable the T1 line to send the RAI signal generated after detecting an alarm first.
64 ● data-coding (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference data-coding (CT1/PRI Interface) Purpose Use the data-coding normal command to disable user data inversion on the CT1/PRI interface. Use the data-coding inverted command to enable user data inversion on the CT1/PRI interface. Use the undo data-coding command to restore the default. Syntax data-coding { normal | inverted } undo data-coding Parameters normal Disables user data inversion.
3Com Router 5000 Family and Router 6000 Family Command Reference data-coding (CT1/PRI Interface) ● 65 data-coding (CT1/PRI Interface) Purpose Use the data-coding normal command to disable user data inversion on the CT1/PRI interface. Use the data-coding inverted command to enable user data inversion on the CT1/PRI interface. Use the undo data-coding command to restore the default. Syntax data-coding { normal | inverted } undo data-coding Parameters normal Disables user data inversion.
66 ● debugging physical 3Com Router 5000 Family and Router 6000 Family Command Reference debugging physical Purpose Use the debugging physical command to enable debugging of the physical module on the specified interface. Use the undo debugging physical command to disable debugging on the specified interface.
3Com Router 5000 Family and Router 6000 Family Command Reference description ● 67 description Purpose Use the description command to describe the interface. Use the undo description command to restore the default. Syntax description interface-description undo description Parameters interface-description Example Change the description of the interface Ethernet 0/0/0 to “3Com Router Ethernet interface”. A string of characters up to 80 characters long describing the interface.
68 ● description 3Com Router 5000 Family and Router 6000 Family Command Reference description Purpose Use the description command to configure port description. Identifying a port is the only function of this command. Use the undo description command to restore the default port description, that is, port name plus interface. Syntax description text undo description Parameters text Example Set the description of port Ethernet 1/0/1 to Ethernet-interface.
3Com Router 5000 Family and Router 6000 Family Command Reference detect ● 69 detect Purpose Use the detect command to enable data carrier detection as well as level detection on a serial interface. Use the undo detect command to disable data carrier detection as well as level detection on the serial interface. Syntax 1. Asynchronous serial interface detect dsr-dtr undo detect dsr-dtr 2.
70 ● detect-ais (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference detect-ais (CE1/PRI Interface) Purpose Use the detect-ais command to enable alarm indication signal (AIS) detect on the CE1/PRI interface. Use the undo detect-ais command to disable AIS detect on the CE1/PRI interface. Syntax detect-ais undo detect-ais Parameters None Default By default, AIS detect is enabled on the CE1/PRI interface. Example Disable AIS detect on interface E1 3/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference detect-ais (CE1/PRI Interface) ● 71 detect-ais (CE1/PRI Interface) Purpose Use the detect-ais command to enable alarm indication signal (AIS) detect on the CE1/PRI interface. Use the undo detect-ais command to disable AIS detect on the CE1/PRI interface. Syntax detect-ais undo detect-ais Parameters None Default By default, AIS detect is enabled on the CE1/PRI interface. Example Disable AIS detect on interface E1 3/0/0.
72 ● detect-ais (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference detect-ais (CE1/PRI Interface) Purpose Use the detect-ais command to enable alarm indication signal (AIS) detect on the CE1/PRI interface. Use the undo detect-ais command to disable AIS detect on the CE1/PRI interface. Syntax detect-ais undo detect-ais Parameters None Default By default, AIS detect is enabled on the CE1/PRI interface. Example Disable AIS detect on interface E1 3/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference detect-ais (CE1/PRI Interface) ● 73 detect-ais (CE1/PRI Interface) Purpose Use the detect-ais command to enable alarm indication signal (AIS) detect on the CE1/PRI interface. Use the undo detect-ais command to disable AIS detect on the CE1/PRI interface. Syntax detect-ais undo detect-ais Parameters None Default By default, AIS detect is enabled on the CE1/PRI interface. Example Disable AIS detect on interface E1 3/0/0.
74 ● differential-delay 3Com Router 5000 Family and Router 6000 Family Command Reference differential-delay Purpose Use the differential-delay command to set the maximum differential delay for the member links in the IMA group. Use the undo differential-delay command to restore the default, that is, 25 milliseconds.
3Com Router 5000 Family and Router 6000 Family Command Reference display brief interface ● 75 display brief interface Purpose Use the display brief interface command to display summary information about the specified or all interfaces. Syntax display brief interface [ type [ number ] ] [ | { begin | include | exclude} text ] Parameters type Interface type. number Interface number. begin Displays information that begins with the specified regular expression.
76 ● display controller cpos 3Com Router 5000 Family and Router 6000 Family Command Reference display controller cpos Purpose Use the display controller cpos command to view information about CPOS interfaces, such as state of the E1/T1 channels and alarms, and errors that occur to regeneration section, multiplex section, and higher-order path. Syntax display controller cpos [ cpos-number ] Parameters cpos-number Example View the path information of the interface CPOS 4/0/0. CPOS interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display controller cpos ● 77 Table 1 Description of the display controller cpos command Field Description Cpos4/0/0 current state: Current physical state of the CPOS interface Description: Interface description Frame-format SDH, multiplex AU-3, clock master, loopback not set Physical layer information of the CPOS interface: SDH frame format, AU-3 multiplexing path, master clock mode (use internal clock signal), and no loopback.
78 ● display controller cpos Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ display controller cpos e1 ■ display controller cpos t1
3Com Router 5000 Family and Router 6000 Family Command Reference display controller cpos e1 ● 79 display controller cpos e1 Purpose Use the display controller cpos e1 command to view the physical layer configuration information of a specified E1 channel on the specified CPOS interface. Syntax display controller cpos cpos-number e1 e1-number Parameters e1-number Example View state about E1 channel 1 on the interface CPOS 1/0/0. Number of an E1 channel on a CPOS interface. Valid values are 1 to 63.
80 ● display controller cpos e1 Description 3Com Router 5000 Family and Router 6000 Family Command Reference Different from the display controller cpos command, this command can display the error and alarm information of the corresponding lower-order path and that of E1 frames.
3Com Router 5000 Family and Router 6000 Family Command Reference display controller cpos t1 ● 81 display controller cpos t1 Purpose Use the display controller cpos t1 command to view the physical layer configuration information of a specified T1 channel on the specified CPOS interface. Syntax display controller cpos cpos-number t1 t1-number Parameters t1-number Example View the state about the T1 channel 2 on the interface CPOS 4/0/0. Number of a T1 channel on a CPOS interface.
82 ● display controller cpos t1 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display controller cpos t1 command (continued) View Field Description Error: Error statistics Cpos4/0/0 CT1 2 is up The current physical state of T1 channel 1 on interface CPOS 4/0/0 Frame-format ESF, clock master, loopback not set Information about the physical layer of the T1 channel: the frame format is set to ESF, master clock (internal clock) is used, loop
3Com Router 5000 Family and Router 6000 Family Command Reference display controller e1 ● 83 display controller e1 Purpose Use the display controller e1 command to display the information related to a CE1/PRI interface. Syntax display controller [ e1 number ] Parameters number Example Display the information related to the E1 interface. Interface number.
84 ● display controller e1 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display controller e1 command (continued) Field Description Data in current interval (10 seconds elapsed): In the current interval, duration that each type of errors lasts. These errors include loss of frame alignment, frame error, alarm, loss of signals, code violation, frame slip, and E-bit error.
3Com Router 5000 Family and Router 6000 Family Command Reference display controller e3 ● 85 display controller e3 Purpose Use the display controller e3 command to view state information on a CE3 interface. Syntax display controller e3 interface-number Parameters interface-number Example Display the information on the interface E3 1/0/0. CE3 interface number.
86 ● display controller e3 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display controller e3 command Field Description E3 1/0/0 is up Physical state of the E3 interface, which is up in this example Description : E3 1/0/0 Interface Description about the interface Applique type is CE3 75 OHM unbalanced Frame-format G751, line code HDB3, clock slave, national-bit 1,loopback not set Operating mode: CE3 or E3 Line type Frame format: G751 or H
3Com Router 5000 Family and Router 6000 Family Command Reference display controller t1 ● 87 display controller t1 Purpose Use the display controller t1 command to display the information about the specified CT1/PRI interface. Syntax display controller t1 number Parameters number Example Display the information about T1 interface 1/0/0. Interface number.
88 ● display controller t1 3Com Router 5000 Family and Router 6000 Family Command Reference 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 900 Unavail Secs Total Data (last 2 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Ais Alarm Secs, 2087 Los Alarm Secs 52 Slip Secs, 2087 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 2087 Unavail Secs Table 1 Description on the fields of the display controller t1 command Field D
3Com Router 5000 Family and Router 6000 Family Command Reference display controller t1 ● 89 Table 1 Description on the fields of the display controller t1 command (continued) Field Description Historical Statistics: Historical statistics Last clearing of counters: Never Counter clearing records Data in current interval (285 seconds elapsed): Statistics spanning the current interval.
90 ● display controller t1 View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Any view This command displays the following information about the specified interface: ■ Physical state ■ Cable type ■ Clock mode ■ Line code format ■ Loopback mode ■ Line idle code ■ Interframe filling tag ■ Alarm states ■ Error statistics gathered at 15-minute intervals during the last 24 hours
3Com Router 5000 Family and Router 6000 Family Command Reference display dsl configuration ● 91 display dsl configuration Purpose Use the display dsl configuration command to view the actual ADSL configurations. Syntax display dsl configuration interface atm interface-number Parameters interface-number Example Display the actual ADSL configurations. Interface number. [3Com -Atm1/0/0]display dsl configuration interface atm 1/0/0 Line Params Set by User or default Standard: T1.
92 ● display dsl configuration 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the output of the display dsl configuration command Field Description Line Params Set by User Line parameters at ATU-R end. Among these parameters, you can only modify the standard for special testing or diagnosis, but not the others. The following information appears after the link is activated.
3Com Router 5000 Family and Router 6000 Family Command Reference display dsl configuration ● 93 display dsl configuration Purpose Use the display dsl configuration command to view the actual DSL configurations. Syntax display dsl configuration interface atm interface-number Parameters interface-number Example Display the actual G.SHDSL configurations.
94 ● display dsl configuration 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the output of the display dsl configuration command (continued) View Field Description PSD Mode Power spectral density mode: symmetric or asymmetric Power-Backoff Power compensation LinkCheck State of link check: enable or disable Actual Handshake Status –– Remote Handshake Status –– This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display dsl status ● 95 display dsl status Purpose Use the display dsl status command to view the DSL state information. Syntax display dsl status interface atm interface-number Parameters interface-number Example Display state about the ADSL on interface ATM 1/0/0. Interface number. [3Com -Atm1/0/0]display dsl status interface atm 1/0/0 Active Params Near End Far End SNR Margin(dB): 11.3 13.0 Attn(dB): 2.5 0.0 Pwr(dBm): 12.4 7.
96 ● display dsl status View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display dsl status ● 97 display dsl status Purpose Use the display dsl status command to view state about the specified DSL interface. Syntax display dsl status interface atm interface-number Parameters interface-number Example Display state information of the specified two-wire G.SHDSL interface that is up.
98 ● display dsl status 3Com Router 5000 Family and Router 6000 Family Command Reference Line A Statistics since last activation: CRC: 0 LOSW Defect: 0 ES: 0 SES: 0 UAS: 0 TX EOC: 0 RX EOC: 0 Line A status: Xcvr Op State: Data Mode Last Fail Op State: 0x00 Frame Sync: in sync Line Rate(Kbps): 2312 Wire Type: 4 SNR Margin(dB): 13.30 Loop Attenuation(dB): 0.00 RecvGain(dB): 5.86 TxPower(dBm): 9.
3Com Router 5000 Family and Router 6000 Family Command Reference Rmt Vendor Data: display dsl status ● 99 0x12 0x34 0x56 0x78 0x12 0x34 0x56 0x78 Table 1 Description on the fields of the display dsl status command View Field Description Operating Mode CPE or CO DSL Mode Annex supported by the interface: Annex A or Annex B Configured Wire Type Configured wire mode of the interface: two-wire or four-wire Line A Statistics since last activation Statistics about wire-pair A CRC Count of CRC erro
100 ● display dsl version 3Com Router 5000 Family and Router 6000 Family Command Reference display dsl version Purpose Use the display dsl version command to view DSL version and the available capabilities. Syntax display dsl version interface atm interface-number Parameters interface-number Example Display the ADSL version information. Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display dsl version ● 101
102 ● display dsl version 3Com Router 5000 Family and Router 6000 Family Command Reference display dsl version Purpose Use the display dsl version command to view the DSL version and the available functionality. Syntax display dsl version interface atm interface-number Parameters interface-number Example Display the G.SHDSL version on interface ATM 3/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference display fe1 serial ● 103 display fe1 serial Purpose Use the display fe1 serial command to view the configuration and state about the specified or all E1-F interfaces. Syntax display fe1 [ serial serial-number ] Parameters serial serial-number Example Display information on an E1-F interface. Number of the serial interface. If no interface is specified, information on all the E1-F interfaces is displayed.
104 ● display ft 1 serial 3Com Router 5000 Family and Router 6000 Family Command Reference display ft 1 serial Purpose Use the display ft1 serial command to view the configuration and state of the T1-F interface. Syntax display ft1 [ serial serial-number ] Parameters serial serial-number Example Display information on the T1-F interface. Number of the serial interface. If no interface is specified, the information on all the T1-F interfaces is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display ft 1 serial ● 105 42 Slip Secs, 724 Fr Loss Secs, 9520901 Line Err Secs, 2 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 724 Unavail Secs Total Data (last 2 15 minute intervals): 9520901 Line Code Violations, 2805 Path Code Violations 0 Ais Alarm Secs, 1904 Los Alarm Secs 72 Slip Secs, 1943 Fr Loss Secs, 9520901 Line Err Secs, 2 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 1943 Unavail
106 ● display ft 1 serial 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display ft1 serial command (continued) Fields Description Bit Errors (since latest sync) Number of bit errors received since the last synchronization Bits Received (since latest sync) Number of bits received since last synchronization Historical Statistics: Historical statistics Last clearing of counters: Never Counter clearing records Data in current interval Stati
3Com Router 5000 Family and Router 6000 Family Command Reference display ft 1 serial ● 107 Table 1 Description on the fields of the display ft1 serial command (continued) Fields Description Total Data (last 2 15 minute intervals): Statistics spanning the last two intervals. 0 Line Code Violations, 0 Path Code Violations The statistical items are the same as those provided by the statistics spanning the current interval.
108 ● display interface 3Com Router 5000 Family and Router 6000 Family Command Reference display interface Purpose Use the display interface command to view the current running state and other information about an interface. Syntax display interface type number [ .sub-number ] Parameters type Interface type, along with number identifies an interface. number Interface number, along with type, identifies an interface. sub-number Subinterface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ● 109 ■ Link layer protocol of the interface and its operating state and statistics.
110 ● display interface 3Com Router 5000 Family and Router 6000 Family Command Reference display interface Purpose Use the display interface command to view configuration information on the port. Syntax display interface [ interface_type | interface_type interface_num | interface_name ] Parameters interface_type Port type. interface_num Port number. interface_name Port name, in interface_type interface_num format.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ● 111 Table 1 Description on the fields of the display interface command (continued) Field Description Flow-control is not supported Flow control setting on the port Mac-aging time Aging time of MAC addresses Broadcast MAX-ratio Broadcast storm suppression ratio on the port Output flow-control is disabled, input flow-control is disabled Output flow control and input flow control are disabled.
112 ● ft3 (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference ft3 (CT3 Interface) Purpose Use the ft3 command to configure the CT3 interface to operate in FT3 mode and to set the DSU mode and subrate for FT3. Use the undo ft3 command to restore the default DSU mode or subrate. Syntax ft3 { dsu-mode { 0 | 1 | 2 | 3 } | subrate number } undo ft3 { dsu-mode | subrate } Parameters Sets the data service unit (DSU) mode for fractional T3 (FT3).
3Com Router 5000 Family and Router 6000 Family Command Reference ft3 (CT3 Interface) ● 113 When using the ft3 command, note that: ■ The command is only available to the FT3-supported CT3 cards. ■ The command is available in T3 mode only. In CT3 mode, the command is unavailable. ■ The subrates available in a DSU mode set using the ft3 dsu-mode command are discrete and the subrate set using the ft3 subrate command is an approximate subrate.
114 ● feac (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference feac (CT3 Interface) Purpose Use the feac command to enable FEAC channel signal detection and sending on the CT3 interface. Use the undo feac command to remove the current FEAC settings.
3Com Router 5000 Family and Router 6000 Family Command Reference feac (CT3 Interface) ● 115 On CT3 interface 1/0/0 send loopback code to the far end and disable far-end payload loopback. <3Com > system-view [3Com ] interface t3 1/0/0 [3Com -T3 1/0/0] undo feac generate loopback ds3-payload View This command can be used in the following views: ■ Description CT3 Interface view FEAC is a channel formed by using the third C-bit in the first subframe in C-bit framing.
116 ● display controller t3 3Com Router 5000 Family and Router 6000 Family Command Reference display controller t3 Purpose Use the display controller t3 command to view state about a CT3 interface. Syntax display controller t3 interface-number Parameters interface-number Example Display the information related to the CT3 interface 3/0/0. CT3 interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display controller t3 ● 117 Time: 0 minute(s), Time past: 0 minute(s) Bit errors (since test started): 0 bits Bits received (since test started): 0 Kbits Bit errors (since latest sync): 0 bits Bits received (since latest sync): 0 Kbits Table 1 Description on the fields of the display controller t3 command Field Description T3 3/0/0 current state :UP Physical state of the interface: up or down Description : T3 3/0/0 Interface Descriptio
118 ● display controller t3 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display controller t3 command (continued) Field Description Test pattern: 2^7, Status: Not Sync, Sync Detected: 0 Test pattern in use (such as 2^7, 2^11, 2^15, and QRSS), 2^7 in this example; synchronization state, and the number of detected synchronizations Time: 0 minute(s), Time past: 0 minute(s) The duration of the BERT test and the time that has elapsed Bit error
3Com Router 5000 Family and Router 6000 Family Command Reference display interface atm ● 119 display interface atm Purpose Use the display interface atm command to display the configuration and state information about the specified or all ATM interfaces. Syntax display interface atm [ interface-number ] Parameters interface-number Example Display the configuration and state information about ATM E1 interface 3/0/0. ATM interface number.
120 ● display interface atm 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display interface atm command (continued) Field Description ATM over E1, Scramble enabled, frame-format crc4-adm Physical layer: E1 Scrambling state: enabled or disabled Frame format: CRC4 ADM or No-CRC4 ADM code hdb3, clock slave,Cable-length long, loopback not set Line coding type: HDB3 or AMI Clock type: slave or master Cable type: long or short State of loopback se
3Com Router 5000 Family and Router 6000 Family Command Reference display interface bri ● 121 display interface bri Purpose Use the display interface bri command to view status about the specified ISDN BRI interface. Syntax display interface bri interface-type interface-number Parameters interface-type interface-number Example Specifies an interface by its type and number. Display status about ISDN BRI interface BRI 3/0/0:1.
122 ● display interface {Ethernet Gigabithernet} 3Com Router 5000 Family and Router 6000 Family Command Reference display interface {Ethernet Gigabithernet} Purpose Use the display interface { ethernet | gigabitethernet } command to view information about Ethernet interfaces, such as their configurations and current running state. Syntax display interface { ethernet | gigabitethernet } [ interface-number ] Parameters ethernet Displays the state of FE interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface {Ethernet Gigabithernet} ● 123 Table 1 Display on the fields of the display interface command (continued) Field Description IP Sending Frames’ Format is Format and hardware (MAC) address of IP sending PKTFMT_ETHNT_2, Hardware address is frames 00e0.fc06.
124 ● display interface {Ethernet Gigabithernet} 3Com Router 5000 Family and Router 6000 Family Command Reference Output(normal): 0 packets, 0 bytes 0 broadcasts, 0 multicasts, 0 pauses Output: 0 output errors, 0 underruns, 0 buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, 0 no carrier View This command can be used in the following views: ■ Description Any view For an SFP port, the detailed information about the optic module including vender type, wavelength, tra
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ima-group ● 125 display interface ima-group Purpose Use the display interface ima-group command to view the configuration and state information about the specified or all IMA group interfaces. Syntax display interface ima-group [ slot/card/group-number ] Parameters slot Number of the slot for the ATM E1/T1 interface card. card Number of the ATM E1/T1 interface card. group-number IMA group number.
126 ● display interface ima-group 3Com Router 5000 Family and Router 6000 Family Command Reference Last 300 seconds output rate 0.09 bytes/sec, 0 bits/sec, 0.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ima-group ● 127 Table 1 Description on the fields of the display interface ima-group command (continued) Field Description ImaGroupNeFailureStatus: NO_FAILURE ImaGroupFeFailureStatus: NO_FAILURE State of the IMA group, which can be one of the following: IMA_GSM_START_UP IMA_GSM_START_UP_ACK IMA_GSM_CFG_ABORT_BAD_M IMA_GSM_CFG_ABORT_BAD_SYM IMA_GSM_CFG_ABORT_BAD_VERSN IMA_GSM_CFG_ABORT_OTHER IMA_GSM_INSUFFICIENT_LINKS IMA
128 ● display interface loopback 3Com Router 5000 Family and Router 6000 Family Command Reference display interface loopback Purpose Use the display interface loopback command to view state about the specified or all created loopback interfaces. Syntax display interface loopback [ number ] Parameters number Example View state about the specified loopback interface. Number of loopback interface, which must have been created.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface mp-group ● 129 display interface mp-group Purpose Use the display interface mp-group command to view the state about the specified or all MP-group interfaces. Syntax display interface mp-group [ number ] Parameters number Example Display the state about all MP-group interfaces. Number of the MP-group interface. If no MP-group interface is specified, the state about all MP-group interfaces is displayed.
130 ● display interface null 3Com Router 5000 Family and Router 6000 Family Command Reference display interface null Purpose Use the display interface null command to view the state about the null interface. Syntax display interface null [ 0 ] Parameters 0 Example View the state about null 0 interface. Number of null interface, fixed as 0.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface pos ● 131 display interface pos Purpose Use the display interface pos command to view the configuration and state information of one or all POS interfaces. Syntax display interface pos [ interface-number ] Parameters interface-number Example Display the configuration and the state information of the interface POS 3/0/0. Interface number.
132 ● display interface virtual-ethernet 3Com Router 5000 Family and Router 6000 Family Command Reference display interface virtual-ethernet Purpose Use the display interface virtual-ethernet command to view the state about of the specified or all virtual Ethernet interfaces. Syntax display interface virtual-ethernet [ number ] Parameters number Example View the state about virtual Ethernet interface 1. Number of the virtual Ethernet interface. Valid values are 0 to 1023.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface virtual-template ● 133 display interface virtual-template Purpose Use the display interface virtual-template command to view the state about the specified or all virtual templates. Syntax display interface virtual-template [ number ] Parameters virtual-template Virtual template. number Number of the virtual template. Valid values are 0 to 1023.
134 ● display osm status slot 3Com Router 5000 Family and Router 6000 Family Command Reference display osm status slot Purpose Use the display osm status slot slotnum command to view the information about the OSM board in the specified slot, including name of the board, board status, OS name, OS version and running time of OS. Syntax display osm status slot slotnum Parameters slotnum Example Display information of OSM board in slot3. Number of the slot OSM board is in.
3Com Router 5000 Family and Router 6000 Family Command Reference display port ● 135 display port Purpose Use the display port command to check whether the current system has hybrid or trunk ports. If there is any, its port name is displayed. Syntax display port { hybrid | trunk } Parameters hybrid Displays hybrid ports. Trunk Displays trunk ports. View This command can be used in the following views: ■ Example Any view Display the hybrid ports in the current system.
136 ● display status interface 3Com Router 5000 Family and Router 6000 Family Command Reference display status interface Purpose Use the display status interface command to display the state of the specified interface. Syntax display status interface interface-type interface-number Parameters interface-type interface-number Example Specifies an interface by its type and number. Display the state of Ethernet interface 0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference display status interface ● 137 Recv No Buffers: Short Packets(<64): Long Packets: 0 CRC errors packets: 0 Symb errors packets: Sequence err packets: Recv No Buffers: Short Packets(<64): Long Packets: 0 0 0 0 0 0 0 Hardware information of transmitted: Output packets: 0 Broadcast packets: 1 Multicast packets: 0 Defered Packets: 0 No ready(underrun): 0 Lost Carriers: 0 Late collisions: 0 Total collision: 0 Flow-control information: Receive X
138 ● display status interface ima-group 3Com Router 5000 Family and Router 6000 Family Command Reference display status interface ima-group Purpose Use the display status interface ima-group command to view detailed information about the specified IMA group interface. Syntax display status interface ima-group slot/card/group-number Parameters slot Number of the slot for the ATM E1/T1 interface card. card Number of the ATM E1/T1 interface card. group-number IMA group number.
3Com Router 5000 Family and Router 6000 Family Command Reference display status interface ima-group ● 139 Table 1 Description on the fields of the display status interface ima-group command Field Description Shutdowns/Noshuts Number of shutdown/undo shutdown operations LinkUps/LinkDowns Number of link status changes Ima-group configuration and status : Configuration and states of the IMA group, including: ImaGroupTxImaId = 0 ImaGroupRxImaId = 0 reflect Specify reflec IMA group number, transmit/re
140 ● display virtual-access 3Com Router 5000 Family and Router 6000 Family Command Reference display virtual-access Purpose Use the display virtual-access command to view state information about the specified or all virtual access interfaces. Syntax display virtual-access { dialer [ number ] | vt [ vt-number ] | user user-name | peer peer-address | va-number }* Parameters dialer number Dialer interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display vlan ● 141 display vlan Purpose Use the display vlan command to view information on VLANs. Syntax display vlan [ vlan_id Parameters vlan_id Specifies a VLAN by its VLAN ID, which is defined in IEEE802.1Q. Valid values are 1 to 4094. If no value is specified, the default is 1. all Displays information on all VLANs. Example [ to ] vlan_id | all ] Display information on VLAN 2.
142 ● display vlan interface 3Com Router 5000 Family and Router 6000 Family Command Reference display vlan interface Purpose Use the display vlan interface command to view VLAN configuration information on a certain interface (only supporting sub-interface). Syntax display vlan interface interface-type interface-num Parameters interface-type interface-num Example Specifies the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display vlan max-packet-process ● 143 display vlan max-packet-process Purpose Use the display vlan max-packet-process command to view the maximum number of processed packets configured on a certain VLAN per second. Syntax display vlan max-packet-process vid Parameters vid Example Display the maximum number of processed packets configured on the VLAN 10. VLAN ID, used to identify a VLAN.
144 ● display vlan max-packet-process 3Com Router 5000 Family and Router 6000 Family Command Reference display vlan max-packet-process Purpose Use the display vlan max-packet-process command to view the maximum number of processed packets configured on a certain VLAN per second. Syntax display vlan max-packet-process vid Parameters vid Example Display the maximum number of processed packets configured on the VLAN 10. VLAN ID, used to identify a VLAN.
3Com Router 5000 Family and Router 6000 Family Command Reference display vlan statistics vid ● 145 display vlan statistics vid Purpose Use the display vlan statistics vid command to view the packet statistics on a certain VLAN, e.g. the received packet number and the sent packet number. Syntax display vlan statistics vid vid Parameters vid Example Display the packet statistics on VLAN 10. VLAN ID, used to identify a VLAN.
146 ● display vlan statistics vid 3Com Router 5000 Family and Router 6000 Family Command Reference display vlan statistics vid Purpose Use the display vlan statistics vid command to view the packet statistics on a certain VLAN, e.g. the received packet number and the sent packet number. Syntax display vlan statistics vid vid Parameters vid Example Display the packet statistics on VLAN 10. VLAN ID, used to identify a VLAN.
3Com Router 5000 Family and Router 6000 Family Command Reference dsl link-check ● 147 dsl link-check Purpose Use the dsl link-check enable command to enable retraining upon detection of a major fault after the DSL interface comes up. Use the dsl link-check disable command to disable retraining upon detection of a major fault after the DSL interface comes up. Syntax dsl link-check enable dsl link-check disable Parameters None Default By default, retraining upon detection of a major fault is enabled.
148 ● duplex 3Com Router 5000 Family and Router 6000 Family Command Reference duplex Purpose Use the duplex command to set the operating mode of the Ethernet interface. Use the undo duplex command to restore the default operating mode of the Ethernet interface. Syntax duplex { full | half | negotiation } undo duplex Parameters full Sets the Ethernet interface to work in full duplex. half Sets the Ethernet interface to work in half duplex.
3Com Router 5000 Family and Router 6000 Family Command Reference duplex ● 149 duplex Purpose Use the duplex command to configure the duplex mode of the Ethernet port. Use the undo duplex command to restore the default duplex mode of the port, that is, auto-negotiation. Syntax duplex { full | half | negotiation } undo duplex Parameters Example full The port is in full duplex mode. half The port is in half duplex mode. negotiation The port is in auto-negotiation mode.
150 ● e1 channel-set 3Com Router 5000 Family and Router 6000 Family Command Reference e1 channel-set Purpose Use the e1 channel-set command to bundle timeslots on an E1 line. Use the undo e1 channel-set command to remove the timeslot bundle. Syntax e1 line-number channel-set set-number timeslot-list range undo e1 line-number channel-set set-number Parameters line-number E1 line number. Valid values are 1 to 16. set-number The number of the channel-set formed by a timeslot bundle on the E1 line.
3Com Router 5000 Family and Router 6000 Family Command Reference e1 channel-set ● 151 e1 channel-set Purpose Use the e1 channel-set command to bundle multiple timeslots on an E1 channel into one channel set. Use the undo e1 channel-set command to remove the bundle. Syntax e1 e1-number channel-set set-number timeslot-list range undo e1 e1-number channel-set range Parameters Example e1-number Number of an E1 channel on the CPOS interface. Valid values are 1 to 63. set-number Channel set number.
152 ● e1 channel-set Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference e1 unframed
3Com Router 5000 Family and Router 6000 Family Command Reference e1 set loopback ● 153 e1 set loopback Purpose Use the e1 set loopback command to configure the loopback mode of the E1 channel. Use the undo e1 set loopback command to disable loopback (default). Syntax e1 e1-number set loopback { local | remote } undo e1 e1-number set loopback Parameters Example e1-number Number of an E1 channel on the CPOS interface. Valid values are 1 to 63. local Places the E1 channel in local loopback.
154 ● e1 set clock 3Com Router 5000 Family and Router 6000 Family Command Reference e1 set clock Purpose Use the e1 set clock command to set the clock mode of the E1 channel. Use the undo e1 set clock command to restore the default, slave mode. Syntax e1 e1-number set clock { master | slave } undo e1 e1-number set clock Parameters Example e1-number Number of an E1 channel on the CPOS interface. Valid values are 1 to 63. master Sets the clock mode of the E1 channel to master.
3Com Router 5000 Family and Router 6000 Family Command Reference e1 set clock ● 155 e1 set clock Purpose Use the e1 set clock command to set clocking of an E1 line on the CE3 interface. Use the undo e1 clock command to restore the default or line clock. Syntax e1 line-number set clock { master | slave } undo e1 line-number set clock Parameters Example line-number E1 line number. Valid values are 1 to 16. master Internal clock. slave Line clock.
156 ● e1 set frame-format 3Com Router 5000 Family and Router 6000 Family Command Reference e1 set frame-format Purpose Use the e1 set frame-format command to set the frame format of an E1 channel. Use the undo e1 set frame-format command to restore the default frame format, no-CRC4. Syntax e1 e1-number set frame-format { crc4 | no-crc4 } undo e1 e1-number set frame-format Parameters Example e1-number Number of an E1 channel on the CPOS interface. Valid values are 1 to 63.
3Com Router 5000 Family and Router 6000 Family Command Reference e1 set frame-format ● 157 e1 set frame-format Purpose Use the e1 set frame-format command to configure the frame format on an E1 line. Use the undo e1 set frame-format command to restore the default or no-crc4. Syntax e1 line-number set frame-format { crc4 | no-crc4 } undo e1 line-number set frame-format Parameters Example line-number E1 line number. Valid values are 1 to 16. crc4 The frame format adopted by an E1 line is CRC4.
158 ● e1 set loopback 3Com Router 5000 Family and Router 6000 Family Command Reference e1 set loopback Purpose Use the e1 set loopback command to set the loopback mode of the specified E1 line on the E3 interface. Use the undo e1 set loopback command to disable loopback on the E1 line. Syntax e1 line-number set loopback { local | remote | payload} undo e1 line-number set loopback Parameters line-number E1 line number. Valid values are 1 to 16. local Enables local loopback on the E1 line.
3Com Router 5000 Family and Router 6000 Family Command Reference e1 shutdown ● 159 e1 shutdown Purpose Use the e1 shutdown command to shut down an E1 line on the CE3 interface. Use the undo e1 shutdown command to enable the E1 line. Syntax e1 line-number shutdown undo e1 line-number shutdown Parameters line-number Default By default, E1 lines are enabled. Example Shut down the first E1 line on the E3 interface. E1 line number. Valid values are 1 to 16.
160 ● e1 shutdown 3Com Router 5000 Family and Router 6000 Family Command Reference e1 shutdown Purpose Use the e1 shutdown command to shut down an E1 channel. Use the undo e1 shutdown command to enable the E1 channel. Syntax e1 e1-number shutdown undo e1 e1-number shutdown Parameters e1-number Default By default, E1 channels are enabled. Example Disable E1 channel 1. Number of an E1 channel on the CPOS interface. Valid values are 1 to 63.
3Com Router 5000 Family and Router 6000 Family Command Reference e1 unframed ● 161 e1 unframed Purpose Use the e1 unframed command to set an E1 line on a CE3 interface to work in unframed mode (E1 mode). Use the undo e1 unframed command to set the E1 line on the CE3 interface to work in framed mode (CE1 mode, the default). Syntax e1 line-number unframed undo e1 line-number unframed Parameters line-number Example Set the first E1 line on the E3 interface to work in unframed mode. E1 line number.
162 ● e1 unframed 3Com Router 5000 Family and Router 6000 Family Command Reference e1 unframed Purpose Use the e1 unframed command to set an E1 channel on the CPOS interface to unframed mode or E1 mode. Use the undo e1 unframed command to restore the default setting, channelized mode. Syntax e1 e1-number unframed undo e1 e1-number unframed Parameters e1-number Example Set E1 channel 3 on the CPOS interface 1/0/0 to operate in unframed mode. Number of an E1 channel on the CPOS interface.
3Com Router 5000 Family and Router 6000 Family Command Reference eliminate-pulse ● 163 eliminate-pulse Purpose Use the eliminate-pulse command to eliminate the pulses with a width less than 3.472us, increasing signal reliability. This is useful when the line is seriously interfered. Use the undo eliminate-pulse command to restore the default, eliminating the pulses with a width less than 1.472 us.
164 ● enable snmp trap undown 3Com Router 5000 Family and Router 6000 Family Command Reference enable snmp trap undown Purpose Use the enable snmp trap updown command to enable the interface to send UPDOWN traps. Use the undo enable snmp trap updown command to disable the interface to send UPDOWN traps. Syntax enable snmp trap updown undo enable snmp trap updown Parameters None Default By default, the interface can send UPDOWN traps. Example Disable interface Ethernet 0/0/0 to send UPDOWN traps.
3Com Router 5000 Family and Router 6000 Family Command Reference error-diffusion restraint config ● 165 error-diffusion restraint config Purpose Use the error-diffusion restraint config command to set the three parameters for error diffusion restraint function. Use the undo error-diffusion restraint enable command to restore the three parameters set for error diffusion restraint function to the default value.
166 ● error-diffusion restraint enable 3Com Router 5000 Family and Router 6000 Family Command Reference error-diffusion restraint enable Purpose Use the error-diffusion restraint enable command to enable error diffusion restraint. Use the undo error-diffusion restraint enable command to disable error diffusion restraint. Syntax error-diffusion restraint enable undo error-diffusion restraint enable Parameters None. Default By default, error diffusion restraint is enabled.
3Com Router 5000 Family and Router 6000 Family Command Reference fdl ● 167 fdl Purpose Use the fdl command to set the behavior of the CT1/PRI interface on the FDL in ESF framing. Use the undo fdl command to restore the default. Syntax fdl { none | ansi | att } undo fdl Parameters none Disables facilities data link (FDL). ansi Implements ANSI T1.403 FDL. att Implements AT&T TR 54016 FDL. Default By default, FDL is disabled.
168 ● fe1 clock 3Com Router 5000 Family and Router 6000 Family Command Reference fe1 clock Purpose Use the fe1 clock command to configure clocking on the E1-F interface. Use the undo fe1 clock command to restore the default or slave, the line clock. Syntax fe1 clock { master | slave } undo fe1 clock Parameters Example master Internal clock. slave Line clock. Set the E1-F interface to use internal clock.
3Com Router 5000 Family and Router 6000 Family Command Reference fe1 code ● 169 fe1 code Purpose Use the fe1 code command to configure the line code format of the E1-F interface. Use the undo fe1 code command to restore the default or hdb3. Syntax fe1 code { ami | hdb3 } undo fe1 code Parameters Example ami AMI line code format. hdb3 HDB3 line code format. Set the line code format of the E1-F interface to AMI.
170 ● fe1 detect-ais (E1-F interface) 3Com Router 5000 Family and Router 6000 Family Command Reference fe1 detect-ais (E1-F interface) Purpose Use the fe1 detect-ais command to enable alarm indication signal (AIS) detect on the E1-F interface. Use the undo detect-ais command to disable AIS detect on the E1-F interface. Syntax fe1 detect-ais undo fe1 detect-ais Parameters None Default By default, AIS detect is enabled on the E1-F interface.
3Com Router 5000 Family and Router 6000 Family Command Reference fe1 frame-format ● 171 fe1 frame-format Purpose Use the fe1 frame-format command to configure the framing format of the E1-F interface. Use the undo fe1 frame-format command to restore the default or no-crc4. Syntax fe1 frame-format { crc4 | no-crc4 } undo fe1 frame-format Parameters Example crc4 Adopts CRC4 as the framing format for the E1-F interface. no-crc4 Adopts no-CRC4 as the framing format for the E1-F interface..
172 ● fe1 loopback 3Com Router 5000 Family and Router 6000 Family Command Reference fe1 loopback Purpose Use the fe1 loopback command to place the E1-F interface in local or remote loopback. Use the undo fe1 loopback command to disable the local and remote loopback on the interface. Syntax fe1 loopback { local | remote } undo fe1 loopback Parameters local Places the interface in local loopback. remote Places the interface in remote loopback. Default By default, loopback is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference fe1 timeslot-list ● 173 fe1 timeslot-list Purpose Use the fe1 timeslot-list command to bundle timeslots on the E1-F interface. Use the undo fe1 timeslot-list command to restore the default. Syntax fe1 timeslot-list range undo fe1 timeslot-list Parameters range Timeslots participating in the binding. Valid values are 1 to 31.
174 ● fe1 unframed 3Com Router 5000 Family and Router 6000 Family Command Reference fe1 unframed Purpose Use the fe1 unframed command to configure an E1-F interface to work in unframed mode. Use the undo fe1 unframed command to configure the E1-F interface to work in framed mode. Syntax fe1 unframed undo fe1 unframed Parameters None Default By default, the E1-F interface works in framed mode. Example Set the E1-F interface to work in unframed mode.
3Com Router 5000 Family and Router 6000 Family Command Reference flag ● 175 flag Purpose Use the flag command to set the overhead byte of SONET/SDH frames. Use the undo flag command to restore the default. Syntax flag { j0 j0-string | j1 j1-string | c2 c2-value } undo flag { j0 | j1 | c2 } Parameters Example j0 Regeneration section trace message, comprised of a string from 1 to 15 characters long. The default value is 0x01. j1 Path trace message, a string of 1 to 15 characters.
176 ● flag 3Com Router 5000 Family and Router 6000 Family Command Reference flag Purpose Use the flag command to set the SDH overhead byte. Use the undo flag command to restore the default. Syntax flag { c2 | j0 } hex-value undo flag { c2 | j0 } Parameters Example c2 Path signal label byte, a higher-order path overhead byte used to indicate the multiplex structure of virtual container (VC) frames and property of payload. The default value is the hexadecimal number 16.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 alarm-threshold ● 177 ft1 alarm-threshold Purpose Use the alarm-threshold command to configure the alarm thresholds on the T1-F interface as needed. Use the undo alarm-threshold command to restore the default alarm threshold values.
178 ● ft1 alarm-threshold 3Com Router 5000 Family and Router 6000 Family Command Reference By default, level-1 LFA alarm threshold applies. Example Set the number of detection intervals to 300 for the pulse detection duration threshold.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 bert (T1-F Interface) ● 179 ft1 bert (T1-F Interface) Purpose Use the ft1 bert command to start a BERT test on the T1-F interface. Use the undo ft1 bert command to stop the BERT test running on the T1-F interface. Syntax ft1 bert pattern { 2^15 | 2^20 } time minutes [ unframed ] undo ft1 bert Parameters Example pattern Sets a bit error rate test (BERT) pattern, which could be 2^15 or 2^20.
180 ● ft1 cable 3Com Router 5000 Family and Router 6000 Family Command Reference ft1 cable Purpose Use the ft1 cable command to configure attenuation or transmission segment matching the T1-F interface. Use the undo ft1cable command to restore the default. Syntax ft1 cable { long decibel | short length } undo ft1 cable Parameters long decibel Matches the transmission segment longer than 655 feet. The argument decibel can take 0db, -7.5db, -15db, or -22.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 clock ● 181 ft1 clock Purpose Use the ft1 clock command to configure clocking on the T1-F interface. Use the undo ft1 clock command to restore the default or slave. Syntax ft1 clock { master | slave } undo ft1 clock Parameters Example master Internal clock is used. slave Line clock is used. Set clocking on the T1-F interface to internal.
182 ● ft1 code 3Com Router 5000 Family and Router 6000 Family Command Reference ft1 code Purpose Use the ft1 code command to configure line code format for a T1-F interface. Use the undo ft1 code command to restore the default or b8zs. Syntax ft1 code { ami | b8zs } undo ft1 code Parameters Example ami AMI line code format. b8zs B8ZS line code format. Set the line code format of the T1-F interface to AMI.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 data-coding ● 183 ft1 data-coding Purpose Use the ft1 data-coding normal command to disable user data inversion on the T1-F interface. Use the ft1 data-coding inverted command to enable user data inversion on the CT1/PRI interface. Use the undo ft1 data-coding command to restore the default. Syntax ft1 data-coding { normal | inverted } undo ft1 data-coding Parameters normal Disables user data inversion.
184 ● ft1 fdl 3Com Router 5000 Family and Router 6000 Family Command Reference ft1 fdl Purpose Use the ft1 fdl command to set the behavior of the T1-F interface on the FDL in ESF framing. Use the undo ft1 fdl command to restore the default. Syntax ft1 fdl { none | ansi | att } undo ft1 fdl Parameters none Disables facilities data link (FDL). ansi Implements ANSI T1.403 FDL. att Implements AT&T TR 54016 FDL. Default By default, FDL is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 loopback ● 185 ft1 loopback Purpose Use the ft1 loopback command to place the T1-F interface in local or remote loopback. Use the undo ft1 loopback command to disable loopback on the interface. Syntax ft1 loopback { local | remote } undo ft1 loopback [ local | remote ] Parameters local Places the interface in local loopback. remote Places the interface in remote loopback.
186 ● ft1 sendloopcode 3Com Router 5000 Family and Router 6000 Family Command Reference ft1 sendloopcode Purpose Use the sendloopcode command to send remote loopback control code. Syntax ft1 sendloopcode { inband-llb-up | inband-llb-down | fdl-ansi-llb-up | fdl-ansi-llb-down | fdl-ansi-plb-up | fdl-ansi-plb-down | fdl-att-plb-up | fdl-att-plb-down } Parameters inband-llb-up Sends in-band line loopback (LLB) activation request code compliant with the ANSI or AT&T implementation.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 sendloopcode ● 187 In LLB mode, all 193 bits (one synchronization bit and 192 effective bandwidth bits) in a T1 PCM frame are looped back. In PLB mode, however, only 192 effective bandwidth bits are looped back. The format of loopback code can be compliant with ANSI T1.403 or AT&T TR 54016. In SF framing, LLB code is sent using the effective bandwidth (slots 1 through 24).
188 ● ft1 timeslot-list 3Com Router 5000 Family and Router 6000 Family Command Reference ft1 timeslot-list Purpose Use the ft1 timeslot-list command to bundle timeslots on the T1-F interface. Use the undo ft1 timeslot-list command to restore the default. Syntax ft1 timeslot-list range [ speed { 56k | 64k } ] undo ft1 timeslot-list Parameters range speed { 56k | 64k } Timeslots participating in the bundling. Valid values are 1 to 24.
3Com Router 5000 Family and Router 6000 Family Command Reference ft1 timeslot-list ● 189 virtual-template command, the displayed baudrate for virtual-template interface could be incorrect.
190 ● flow control 3Com Router 5000 Family and Router 6000 Family Command Reference flow control Purpose Use the flow-control command to enable flow control on the Ethernet interface, which is useful only when the peer end also supports flow control. Use the undo flow-control command to restore the default. Syntax flow-control undo flow-control Parameters None Default By default, flow control is disabled. Example Enable flow control on GE interface 0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference flow-control ● 191 flow-control Purpose Use the flow-control command to enable flow control on the Ethernet port to avoid packet drop when congestion occurs. Use the undo flow-control command to disable flow control. Syntax flow-control undo flow-control Parameters None Default By default, flow control on the Ethernet port is disabled. Example Enable flow control on port Ethernet1/0/1.
192 ● flow-interval 3Com Router 5000 Family and Router 6000 Family Command Reference flow-interval Purpose Use the flow-interval command to configure the interval for measuring the average rate of the interfaces. Use the undo flow-interval command to restore the default. Syntax flow-interval seconds undo flow-interval Parameters seconds Example Set the interval for measuring the average interface rate to 10 seconds. Statistic interval in the range 1 to 1500 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command display interface flow-interval ● 193
194 ● force-link 3Com Router 5000 Family and Router 6000 Family Command Reference force-link Purpose Use the force-link command to enable the GE interface to work in force mode. Use the undo force-link command to restore the default operating mode. Syntax force-link undo force-link Parameters None Default The default operating mode is negotiation. Example Enable negotiation on the GE interface 0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference frame-format ● 195 frame-format Purpose Use the frame-format command to set the frame type of the CPOS interface. Use the undo frame-format command to restore the default or SDH. Syntax frame-format { sdh | sonet } undo frame-format Parameters Example sdh Sets frame type to synchronous digital hierarchy (SDH). sonet Sets frame type to synchronous optical network (SONET).
196 ● frame-format 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format Purpose Use the frame-format command to set the frame format of the POS interface. Use the undo frame-format command to restore the default or SDH. Syntax frame-format { sdh | sonet } undo frame-format Parameters sdh Sets frame type to SDH. sonet Sets frame type to SONET. Default By default, the frame format is SDH. Example Set the frame format of the POS interface to SDH.
3Com Router 5000 Family and Router 6000 Family Command Reference frame-format ● 197 frame-format Purpose Use the frame-format command to configure the ATM over E1/T1 framing format. Use the undo frame-format command to restore the default, that is, CRC4 ADM for ATM E1 and ESF ADM for ATM T1.
198 ● frame-format 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format Purpose Use the frame-format command to configure frame format of ATM E3/T3 interface. Use the undo frame-format command to restore the default configuration. Syntax frame-format { g832-adm | g751-adm | g751-plcp } frame-format { cbit-adm | cbit-plcp | m23-adm | m23-plcp } undo frame-format Parameters g832-adm Configures frame format of ATM E3 as G.823 ATM direct mapping.
3Com Router 5000 Family and Router 6000 Family Command Reference frame-format ● 199 frame-format Purpose Use the frame-format command to set the frame format of ATM OC-3c/STM-1 interface. Use the undo frame-format command to restore the default setting. Syntax frame-format { sdh | sonet } undo frame-format Parameters Example sdh Sets the frame format to SDH STM-1. sonet Sets the frame format to SONET OC-3. Set the frame format on the ATM OC-3c/STM-1 interface to SDH.
200 ● frame-format (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format (CE1/PRI Interface) Purpose Use the frame-format command to set the frame format on the CE1 interface. Use the undo frame-format command to restore the default, or no-crc4. Syntax frame-format { crc4 | no-crc4 } undo frame-format Parameters Example crc4 Sets the frame format on the CE1 interface to CRC4. no-crc4 Sets the frame format on the CE1 interface to no-CRC4.
3Com Router 5000 Family and Router 6000 Family Command Reference frame-format (CE1/PRI Interface) ● 201 frame-format (CE1/PRI Interface) Purpose Use the frame-format command to set the frame format on the CE1 interface. Use the undo frame-format command to restore the default, or no-crc4. Syntax frame-format { crc4 | no-crc4 } undo frame-format Parameters Example crc4 Sets the frame format on the CE1 interface to CRC4. no-crc4 Sets the frame format on the CE1 interface to no-CRC4.
202 ● frame-format (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format (CT1/PRI Interface) Purpose Use the frame-format command to set the frame format on the CT1/PRI interface. Use the undo frame-format command to restore to the default or esf. Syntax frame-format { sf | esf } undo frame-format Parameters Example sf Sets the frame format to super frame (SF). esf Sets the frame format to extended super frame (ESF).
3Com Router 5000 Family and Router 6000 Family Command Reference frame-format (CT1/PRI Interface) ● 203 frame-format (CT1/PRI Interface) Purpose fUse the frame-format command to set the frame format on the CT1/PRI interface. Use the undo frame-format command to restore to the default or esf. Syntax frame-format { sf | esf } undo frame-format Parameters Example sf Sets the frame format to super frame (SF). esf Sets the frame format to extended super frame (ESF).
204 ● frame-format (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference frame-format (CT3 Interface) Purpose Use the frame-format command to configure the frame format used by the CT3 interface. Use the undo frame-format command to restore the default or C-bit frame format. Syntax frame-format { c-bit | m23 } undo frame-format Parameters Example c-bit Sets the frame format to C-bit. m23 Sets the frame format to m23.
3Com Router 5000 Family and Router 6000 Family Command Reference frame-length ● 205 frame-length Purpose Use the frame-length command to configure the number of ATM cells in an IMA frame. Use the undo frame-length command to restore the default, that is, 128 ATM cells in an IMA frame. Syntax frame-length { 32 | 64 | 128 | 256 } undo frame-length Parameters 32, 64, 128, 256 Example Set the number of ATM cells in an IMA frame to 64 on IMA group interface 1/0/1.
206 ● framefill none 3Com Router 5000 Family and Router 6000 Family Command Reference framefill none Purpose Use the framefill none command to disable a serial interface to send interframe filling tags. Use the undo framefill none command to enable the serial interface to send interframe filling tags. Syntax framefill none undo framefill none Parameters None. Default By default, there are filling tags between frames sent by a serial interface.
3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CE1/PRI Interface) ● 207 idlecode (CE1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, or 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
208 ● idlecode (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CE1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, or 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CE1/PRI Interface) ● 209 idlecode (CE1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, or 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
210 ● idlecode (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CE1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, or 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CE1/PRI Interface) ● 211 idlecode (CE1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, or 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
212 ● idlecode (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CT1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CT1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
3Com Switch 5500 Family Command Reference idlecode (CT1/PRI Interface) ● 213 idlecode (CT1/PRI Interface) Purpose iUse the idlecode command to set the line idle code on the CT1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
214 ● idlecode (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference idlecode (CT1/PRI Interface) Purpose Use the idlecode command to set the line idle code on the CT1/PRI interface. Two types of line idle code are available: 0x7e and 0xff. Use the undo idlecode command to restore the default, 0x7e. Syntax idlecode { 7e | ff } undo idlecode Parameters Example 7e Sets the line idle code to 0x7e. ff Sets the line idle code to 0xff.
3Com Router 5000 Family and Router 6000 Family Command Reference idle-mark ● 215 idle-mark Purpose Use the idle-mark command to set the line idle-mark of the synchronous serial interface to “FF”. Use the undo idle-mark command to restore the line idle-mark of the synchronous serial interface to “7E”. Syntax idle-mark undo idle-mark Parameters None Default Line idle-mark of synchronous serial interfaces defaults to “7E”. Example Set the line idle-mark of the synchronous serial interface to FF.
216 ● ima-clock 3Com Router 5000 Family and Router 6000 Family Command Reference ima-clock Purpose Use the ima-clock command to configure the clock mode of the IMA group. Use the undo ima-clock command to restore the default, that is, CTC. Syntax ima-clock { itc | ctc [ link_number number ] } undo ima-clock Parameters Example itc Independent transmit clock configuration. In this mode, the links in the IMA group use at least two clock sources. ctc Common transmit clock configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference ima ima-group ● 217 ima ima-group Purpose Use the ima ima-group command to add the ATM E1/T1 interface to the specified IMA group. If the specified IMA group does not exist, it is created first. Use the undo ima ima-group command to remove the interface from the IMA group. Syntax ima ima-group group-number undo ima ima-group Parameters group-number Example Add ATM E1 interface 1/0/1 to IMA group 1. IMA group number.
218 ● ima-test 3Com Router 5000 Family and Router 6000 Family Command Reference ima-test Purpose Use the ima-test command to set a test pattern for testing the connectivity of the specified link to the rest of the IMA group. Use the undo ima-test command to cancel the test. Syntax ima-test [ link_number number ] [ pattern-id id ] undo ima-test Parameters link_number number Number of the test E1/T1 link in the IMA group. pattern-id id Test pattern.
3Com Router 5000 Family and Router 6000 Family Command Reference interface ● 219 interface Purpose Use the interface command to enter Ethernet port view. Syntax interface { interface_type interface_num | interface_name } Parameters interface_type Port type. It can be Ethernet only. interface_num Port number. interface_name Port name, in interface_type interface_num format. Example Enter the view of Ethernet 1/0/1 port.
220 ● interface 3Com Router 5000 Family and Router 6000 Family Command Reference interface Purpose Use the interface command to enter the specified interface view or create a logical interface or subinterface. Use the undo interface command to delete a specified logical interface or subinterface. Syntax interface type number [ .sub-number ] undo interface type number [ .sub-number ] Parameters Example type Interface type. Table 1 lists the interfaces that VRP supports so far.
3Com Router 5000 Family and Router 6000 Family Command Reference interface ● 221 Table 1 Interfaces supported by VRP (continued) Interface Description Attribute controller t3 T3 interface Physical interface Dialer Dialer interface Logical interface Ethernet Ethernet interface Physical interface gigabitethernet Gigabit Ethernet interface Physical interface Logic-Channel Logical-channel interface Logical interface Loopback Loopback interface Logical interface NULL Null interface Logic
222 ● interface 3Com Router 5000 Family and Router 6000 Family Command Reference interface Purpose Use the interface command to create a P2MP or P2P subinterface. Use the undo interface command to delete the specified subinterface. Syntax interface interface-type interface-number.subinterface-number [ p2mp | p2p ] undo interface interface-type interface-number.subinterface-number Parameters interface-type Type of interface. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference interface atm ● 223 interface atm Purpose Use the interface atm command to enter the view of the specified ATM E1/T1 interface. Syntax interface atm number Parameters number Example Enter the view of ATM E1/T1 interface 1/0/1. ATM E1/T1 interface number.
224 ● interface ethernet 3Com Router 5000 Family and Router 6000 Family Command Reference interface ethernet Purpose Use the interface ethernet command to create an Ethernet subinterface. Use the undo interface ethernet command to delete the specified Ethernet subinterface. Syntax interface ethernet interface-number.subinterface-number undo interface ethernet interface-number.subinterface-number Parameters Example interface-number Interface number. subinterface-number Subinterface number.
3Com Router 5000 Family and Router 6000 Family Command Reference interface ima ● 225 interface ima Purpose Use the interface ima command to enter the specified IMA group interface view. Syntax interface ima slot/card/group-number Parameters slot Slot number. card Card number. group-number IMA group number. Valid values are 1 to 8. Example Enter the view of IMA group interface 1/0/1.
226 ● interface logic-channel 3Com Router 5000 Family and Router 6000 Family Command Reference interface logic-channel Purpose Use the interface logic-channel command to create a logical channel interface. Use the undo interface logic-channel command to delete the specified logical channel interface. Syntax interface logic-channel interface-number undo interface logic-channel interface-number Parameters interface-number Example Create the logical channel interface 100.
3Com Router 5000 Family and Router 6000 Family Command Reference interface loopback ● 227 interface loopback Purpose Use the interface loopback command to create a loopback interface or its view. Use the undo interface loopback command to delete the specified loopback interface. Syntax interface loopback number undo interface loopback number Parameters number Example Create loopback interface 5. Number of the loopback interface. Valid values are 0 to 65535.
228 ● interface mp-group 3Com Router 5000 Family and Router 6000 Family Command Reference interface mp-group Purpose Use the interface mp-group command to create an MP-group interface. Use the undo interface mp-group command to delete the specified MP-group interface. Syntax interface mp-group number undo interface mp-group number Parameters number Example Create MP-group interface 3. Number of MP-group interface. Valid values are 0 to 1023.
3Com Router 5000 Family and Router 6000 Family Command Reference interface null ● 229 interface null Purpose Use the interface null command to enter null interface view. Syntax interface null 0 Parameters None Example Enter the view of null 0 interface. [3Com ] interface null 0 [3Com -NULL0] View This command can be used in the following views: ■ System view Description There is only one null interface, that is, null 0, which always keeps up, and cannot be shut down or deleted.
230 ● interface virtual-ethernet 3Com Router 5000 Family and Router 6000 Family Command Reference interface virtual-ethernet Purpose Use the interface virtual-ethernet command to create a virtual Ethernet interface. Use the undo interface virtual-ethernet command to delete the specified virtual Ethernet interface. Syntax interface virtual-ethernet number undo interface virtual-ethernet number Parameters number Example Create virtual Ethernet interface 12. Number of virtual Ethernet interface.
3Com Router 5000 Family and Router 6000 Family Command Reference interface virtual-ethernet ● 231 interface virtual-ethernet Purpose Use the interface virtual-ethernet command to create a virtual Ethernet interface. Use the undo interface virtual-ethernet command to delete the specified virtual Ethernet interface. Syntax interface virtual-ethernet number undo interface virtual-ethernet number Parameters number Example Create virtual Ethernet interface 12. Number of virtual Ethernet interface.
232 ● interface virtual-template 3Com Router 5000 Family and Router 6000 Family Command Reference interface virtual-template Purpose Use the interface virtual-template command to create a virtual template or enter the existing virtual template view. Use the undo interface virtual-template command to delete the specified virtual template. Syntax interface virtual-template number undo interface virtual-template number Parameters number Example Create virtual template 10.
3Com Router 5000 Family and Router 6000 Family Command Reference invert receive-clock ● 233 invert receive-clock Purpose Use the invert receive-clock command to invert the receive-clock signal on the DTE-side synchronous serial interface. Use the undo invert transmit-clock command to disable inverting the signal. Syntax invert receive-clock undo invert receive-clock Parameters None Default By default, receive-clock signal inversion is disabled on the synchronous serial interface at DTE side.
234 ● invert transmit-clock 3Com Router 5000 Family and Router 6000 Family Command Reference invert transmit-clock Purpose Use the invert transmit-clock command to enable the inverting of the transmit-clock signal of the synchronous serial interface at the DTE side. Use the undo invert transmit-clock command to disable inverting the signal.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn ie passthrough ● 235 isdn ie passthrough Purpose Use the isdn ie passthrough command to enable transparent transmission of some or all related information element and you can use this command to configure transparent transmission direction. Use the undo isdn ie passthrough command to disable the transparent transmission function of some or all related information elements.
236 ● isdn ie passthrough Example 3Com Router 5000 Family and Router 6000 Family Command Reference Set to enable transparent transmission for facility on both directions on Serial 0/0/0:15. <3Com> system-view [3Com] interface serial 0/0/0:15 [3Com-Serial0/0/0:15] isdn ie passthrough facility both View This command can be used in the following views: ■ Description ISDN interface view (not applicable on BRI interface) This command is only valid when ISDN initiates or receives an H.
3Com Router 5000 Family and Router 6000 Family Command Reference itf (CE1/PRI Interface) ● 237 itf (CE1/PRI Interface) Purpose Use the itf command to set the type of and the number of interframe filling tags on the CE1/PRI interface. Two types of interframe filling tag are available: 0x7e and 0xff. Use the undo itf command to restore the default.
238 ● itf (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference itf (CT1/PRI Interface) Purpose Use the itf command to set the type of and the the number of interframe filling tags on the CT1/PRI interface. Two types of interframe filling tag are available: 0x7e and 0xff. Use the undo itf command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol ● 239 link-protocol Purpose Use the link-protocol command to set the link layer protocol of the interface. Syntax link-protocol { fr | hdlc | ppp } Parameters fr Specifies Frame Relay as the link layer protocol of the interface. hdlc Specifies HDLC as the link layer protocol of the interface. ppp Specifies PPP as the link layer protocol of the interface. Default By default, PPP is used.
240 ● loopback 3Com Router 5000 Family and Router 6000 Family Command Reference loopback Purpose Use the loopback command to enable loopback on the Ethernet port for test purpose. Use the undo loopback command to disable loopback on the Ethernet port. Syntax loopback undo loopback Parameters None Default By default, loopback is disabled. Example Enable loopback on port Ethernet 1/0/1.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback ● 241 loopback Purpose Use the loopback command to configure the loopback function of the POS interface. Use the undo loopback command to disable loopback. Syntax loopback { local | remote } undo loopback Parameters local Places the POS interface in local loopback. remote Places the POS interface in remote loopback. Default By default, loopback is disabled. Example Place the interface POS 1/0/0 in local loopback.
242 ● loopback 3Com Router 5000 Family and Router 6000 Family Command Reference loopback Purpose Use the loopback command to enable loopback function of interface. Use the undo loopback command to disable loopback function. Syntax loopback { cell | local | payload | remote } undo loopback Parameters cell Internal cell loopback local Internal loopback. payload External payload loopback, where data is looped back at the framer. remote External line loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback ● 243 loopback Purpose Use the loopback command to configure the loopback mode on the ATM E1/T1 interface. Use the undo loopback command to disable loopback. Syntax loopback { cell | local | remote | payload } undo loopback Parameters cell Internal cell loopback for checking that the local physical chip is operating. local Internal loopback for checking that the local service chip is operating.
244 ● loopback 3Com Router 5000 Family and Router 6000 Family Command Reference loopback Purpose Use the loopback command to set the loopback function on an ATM OC-3c/STM-1 interface. Use the undo loopback command to cancel the loopback function. Syntax loopback { cell | local | remote } undo loopback Parameters cell Enables ATM interface cells local loop. local Enables ATM interface local loop. remote Enables ATM interface remote loopback. Default By default, loop back is forbidden.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback ● 245 loopback Purpose Use the loopback command to enable the loopback function on an ATM OC-3c/STM-1 interface. Use the undo loopback command to disable the loopback function. Syntax loopback { cell | local | remote } undo loopback Parameters cell Enables the ATM interface to perform cell loopback. local Enables the ATM interface to perform local loopback. remote Enables the ATM interface to perform the remote loopback.
246 ● loopback 3Com Router 5000 Family and Router 6000 Family Command Reference loopback Purpose Use the loopback command to configure the loopback function of the CPOS interface. Use the undo loopback command to disable loopback. Syntax loopback { local | remote } undo loopback Parameters local Places the CPOS interface in local loopback. remote Places the CPOS interface in remote loopback. Default By default, loopback is disabled. Example Place CPOS 1/0/0 in remote line loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback ● 247 loopback Purpose Use the loopback command to enable a serial interface to perform loopback. Use the undo loopback command to disable the serial interface to perform loopback. Syntax loopback undo loopback Parameters None Default By default, loopback of the serial interface is disabled. Example Enable loopback on the serial interface.
248 ● loopback (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference loopback (CE1/PRI Interface) Purpose Use the loopback command to enable a CE1/PRI interface to perform loopback. Use the undo loopback command to disable the CE1/PRI interface to perform local, remote, or external payload loopback. Syntax loopback { local | remote | payload } undo loopback Parameters local Enables the interface to perform local loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback (CE3 Interface) ● 249 loopback (CE3 Interface) Purpose Use the loopback command to configure the loopback mode of a CE3 interface. Use the undo loopback command to disable the CE3 interface to perform loopback. Syntax loopback { local | payload | remote } undo loopback Parameters local Enables the CE3 interface to perform local loopback. payload Places the CE3 interface in an remote payload loopback.
250 ● loopback (CT1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference loopback (CT1/PRI Interface) Purpose Use the loopback command to enable a CT1/PRI interface to perform local, remote, or external payload loopback. Use the undo loopback command to disable the CT1/PRI interface to perform loopback. Syntax loopback { local | remote | payload } undo loopback Parameters local Enables the CT1/PRI interface to perform local loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback (CT3 Interface) ● 251 loopback (CT3 Interface) Purpose Use the loopback command to configure the loopback mode of the CT3 interface. Use the undo loopback command to disable the CT3 interface to perform loopback. Syntax loopback { local | payload | remote } undo loopback Parameters local Enables the CT3 interface to perform local loopback. payload Places the CT3 interface in an external payload loop.
3Com Router 5000 Family and Router 6000 Family Command Reference loopback (ISDN BRI Interface) ● 253 loopback (ISDN BRI Interface) Purpose Use the loopback command to place the B1, B2, or both channels on the BRI interface in a remote looback. This can send data from a line back to the line. Use the undo loopback command to disable remote loopback. Syntax loopback { b1 | b2 | both } undo loopback Parameters b1 Places the B1 channel in a remote loopback.
254 ● looptest 3Com Router 5000 Family and Router 6000 Family Command Reference looptest Purpose Use the looptest command to test whether an interface or line is in a loop. Syntax looptest [ -c count | -p { pattern | special { ascending | descending | random } } | -s packetsize | -t timeout ] * interface type number Parameters -c count Number of test packets sending attempts. Valid values are 1 to 4,294,967,295. If not specified, the default is 5.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description looptest ● 255 Any view Loop test is available only on synchronous serial interfaces (including those formed on E1/T1/E1-F/T1-F interfaces) using SD701 chips. A loop test on an interface starts by sending a test packet. If the interface is in a local or line loop, the test packet just sent will loop back to the interface.
256 ● mac-address 3Com Router 5000 Family and Router 6000 Family Command Reference mac-address Purpose Use the mac-address command to configure Mac address of virtual Ethernet interface. Use the undo mac-address command to restore the default. Syntax mac-address H-H-H undo mac-address Parameters H-H-H Example Configure MAC address of virtual Ethernet interface 10. Mac address of virtual Ethernet interface, in hexadecimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference mac-address timer aging ● 257 mac-address timer aging Purpose Use the mac-address timer aging command to set the aging timer for the MAC address table on the port. Use the undo mac-address timer aging command to restore the default, that is, 300 seconds. Syntax mac-address timer aging { age-time | no-age } undo mac-address timer aging Parameters Example age-time Address aging time on the port. Valid values are 10 to 1000000 seconds.
258 ● max-packet-process 3Com Router 5000 Family and Router 6000 Family Command Reference max-packet-process Purpose Use the max-packet-process command to set the maximum number of processed packets per second on a certain VLAN. Use the undo max-packet-process command to restore it to the default setting. Syntax max-packet-process count vid undo max-packet-process vid Parameters count Maximum number of processed packets. vid VLAN ID, used to identify a VLAN.
3Com Router 5000 Family and Router 6000 Family Command Reference mdl (CT3 Interface) ● 259 mdl (CT3 Interface) Purpose Use the mdl command to configure MDL message detection/sending on the CT3 interface. Use the undo mdl detect command to disable the CT3 interface to detect MDL messages. Use the undo mdl generate command to disable the CT3 interface to send MDL messages. Use the undo mdl data command to restore the default.
260 ● mdl (CT3 Interface) Example 3Com Router 5000 Family and Router 6000 Family Command Reference Enable MDL detection on CT3 interface 1/0/0. <3Com > system-view [3Com ] interface t3 1/0/0 [3Com -T3 1/0/0] mdl detect On CT3 interface 1/0/0 set the LIC information sent with MDL messages to hello. <3Com > system-view [3Com ] interface t3 1/0/0 [3Com -T3 1/0/0] mdl data lic hello Send path messages on CT3 interface 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference min-active-links ● 261 min-active-links Purpose Use the min-active-links command to configure the minimum number of available links required for the IMA group to operate. Use the undo min-active-links command to restore the default. Syntax min-active-links number undo min-active-links Parameters number Example Set the minimum number of available links required for IMA group 1/0/1 to operate to 2. Specifies the number of links.
262 ● modem adapt no-waiting-connect 3Com Router 5000 Family and Router 6000 Family Command Reference modem adapt no-waiting-connect Purpose Use the modem adapt no-waiting-connect command to set the asynchronous serial interface Modem to switch from IDLE to ACTIVE without waiting for receiving the signal CONNECT (a signal used for a physical modem to negotiation rate) after it receives CD_UP (a lower layer detects carrier signal).
3Com Router 5000 Family and Router 6000 Family Command Reference mtu (ATM Interface) ● 263 mtu (ATM Interface) Purpose Use the mtu command to set the MTU size of the ATM interface. Use the undo mtu command to restore the default. Syntax mtu size undo mtu Parameters size Example Set MTU of the ATM interface 1/0/0 to 1492. MTU size of the ATM interface (in bytes). If no value is specified, the default is 1500.
3Com Router 5000 Family and Router 6000 Family Command Reference mtu (POS Interface) ● 265 mtu (POS Interface) Purpose Use the mtu command to set the MTU size of the POS interface. Use the undo mtu command to restore the default. Syntax mtu size undo mtu Parameters size Example Set MTU of POS interface 0/0/0 to 1492. MTU size of the POS interface, which is in bytes. Valid values are 128 to 1500. If no value is specified, the default is 1500.
266 ● mtu (serial interface) 3Com Router 5000 Family and Router 6000 Family Command Reference mtu (serial interface) Purpose Use the mtu command to set MTU of the serial interface. Use the undo mtu command to restore the default. Syntax mtu size undo mtu Parameters size Example Set MTU of the serial interface to 1200. MTU size of the serial interface (in bytes). Valid values are 128 to 1500 bytes. If no value is specified, the default is 1500 bytes.
3Com Router 5000 Family and Router 6000 Family Command Reference mtu (serial interface) ● 267 mtu (serial interface) Purpose Use the mtu command to set MTU of the serial interface. Use the undo mtu command to restore the default. Syntax mtu size undo mtu Parameters size Example Set MTU of the serial interface to 1200. MTU size of the serial interface (in bytes). Valid values are 128 to 1500 bytes. If no value is specified, the default is 1500 bytes.
268 ● multiplex mode 3Com Router 5000 Family and Router 6000 Family Command Reference multiplex mode Purpose Use the multiplex mode command to set AUG multiplexing mode. Use the undo multiplex mode command to restore the default setting, au-4. Syntax multiplex mode { au-4 | au-3 } undo multiplex mode Parameters Example au-4 Gets AUG through AU-4. au-3 Gets AUG through AU-3. In SDH mode, multiplex AUG to AU-3.
3Com Router 5000 Family and Router 6000 Family Command Reference national-bit ● 269 national-bit Purpose Use the national-bit command to configure national bit on the CE3 interface. Use the undo national-bit command to restore the default or 1. Syntax national-bit { 0 | 1 } undo national-bit Parameters Example 0 Sets the national bit of the CE3 interface to 0. 1 Sets the national bit of the CE3 interface to 1. Set the national bit to 0 on the interface E3 1/0/0.
270 ● osm connect slot 3Com Router 5000 Family and Router 6000 Family Command Reference osm connect slot Purpose Use the osm connect slot command to connect the current control terminal to the OSM board to manage the system on the OSM board. If you want to return from the OSM board to the operation interface on the router, click hot key . Syntax osm connect slot slotnum Parameters slotnum Example Connect the current control terminal of the router to the OSM board in slot3.
272 ● osm reload slot 3Com Router 5000 Family and Router 6000 Family Command Reference osm reload slot Purpose Use the osm reload slot command to restart the operation system on OSM board. Syntax osm reload slot slotnum Parameters slotnum Example Restart the operation system of the OSM board in slot3. Number of the slot the OSM board is installed. <3Com>osm reload slot 3 This command will reload the OSM.
3Com Router 5000 Family and Router 6000 Family Command Reference osm shutdown slot ● 273 osm shutdown slot Purpose Use the osm shutdown slot command to shut down the operation system on OSM board. This operation equals to execute the turn off command on the operation system of OSM board. Syntax osm shutdown slot slotnum Parameters slotnum Example Shut down the operation system of the OSM board in slot3. Number of the slot the OSM board is installed.
274 ● phy-mru 3Com Router 5000 Family and Router 6000 Family Command Reference phy-mru Purpose Use the phy-mru command to configure in asynchronous flow mode MRU at the physical layer. Use the undo phy-mru command to restore the default. Syntax phy-mru size undo phy-mru Parameters size Example Set the MRU at the physical layer of asynchronous serial interface Async 1/0/0 to 100 bytes. Maximum receive unit (MRU). Valid values are 4 to 1,700 bytes.
3Com Router 5000 Family and Router 6000 Family Command Reference physical-mode ● 275 physical-mode Purpose Use the physical-mode command to set the operating mode of the synchronous/asynchronous serial interface. Syntax physical-mode { sync | async } Parameters sync Sets the synchronous/asynchronous serial interface to work in synchronous mode. async Sets the synchronous/asynchronous serial interface to work in asynchronous mode.
3Com Router 5000 Family and Router 6000 Family Command Reference port hybrid pvid vlan ● 277 port hybrid pvid vlan Purpose Use the port hybrid pvid vlan command to assign a default VLAN ID to the hybrid port. Use the undo port hybrid pvid command to restore the default VLAN ID of the hybrid port. Syntax port hybrid pvid vlan vlan_id undo port hybrid pvid Parameters vlan_id Example Set the default VLAN ID of hybrid port Ethernet 1/0/1 to 100. VLAN ID defined in IEEE802.1Q.
278 ● port trunk permit vlan 3Com Router 5000 Family and Router 6000 Family Command Reference port trunk permit vlan Purpose Use the port trunk permit vlan command to assign the trunk port to the specified VLANs. Use the undo port trunk permit vlan command to remove the trunk port from the specified VLANs. Syntax port trunk permit vlan { vlan_id_list | all } undo port trunk permit vlan { vlan_id_list | all } Parameters Example vlan_id_list Equals [ vlan_id1 [ to vlan_id2 ] ]&<1-10>.
3Com Router 5000 Family and Router 6000 Family Command Reference pri-set (CE1/PRI Interface) ● 279 pri-set (CE1/PRI Interface) Purpose Use the pri-set command to have timeslots on the CE1/PRI interface form a pri-set. Use the undo pri-set command to remove the bundle. Syntax pri-set [ timeslot-list range ] undo pri-set Parameters range Default By default, no pri-set is created. Example Bundle timeslots 1, 2, and 8 through 12 of the CE1/PRI interface into a pri-set.
280 ● pri-set (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference Only one timeslot bundling mode is supported on one CE1/PRI interface at a time. In other words, you cannot use this command and the channel-set command together.
3Com Router 5000 Family and Router 6000 Family Command Reference pri-set (CT1/PRI Interface) ● 281 pri-set (CT1/PRI Interface) Purpose Use the pri-set command to bundle the timeslots of the CT1/PRI interface into a pri-set. Use the undo pri-set command to remove the timeslot bundle. Syntax pri-set [ timeslot-list range ] undo pri-set Parameters range Default By default, no timeslots are bundled into pri-sets.
282 ● pri-set (CT1/PRI Interface) Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference channel-set (CT1/PRI Interface)
3Com Router 5000 Family and Router 6000 Family Command Reference promiscuous ● 283 promiscuous Purpose Use the promiscuous command to set the Ethernet interface to operate in promiscuous mode. Use the undo promiscuous command to disable the Ethernet interface to operate in promiscuous mode. Syntax promiscuous undo promiscuous Parameters None Default By default, the Ethernet interface is operating in non-promiscuous mode. Example Set interface ethernet 0/0/0 to operate in promiscuous mode.
284 ● reset atm 3Com Router 5000 Family and Router 6000 Family Command Reference reset atm Purpose Use the reset atm command to clear statistics about all PVCs on the specified ATM interface, excluding statistics about the ATM interface. Syntax reset atm interface [ atm number ] Parameters atm number Example Clear statistics about all PVCs on the specified ATM interface. ATM interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset counters controller e1 ● 285 reset counters controller e1 Purpose Use the reset counters controller e1 command to clear the controller counter for the CE1/PRI interface. Syntax reset counters controller e1 interface-number Parameters interface-number Example Clear the controller counter for CE1/PRI interface 1/0/0.
286 ● reset counters controller e1 3Com Router 5000 Family and Router 6000 Family Command Reference reset counters controller e1 Purpose Use the reset counters controller e1 command to clear the controller counter for the CE1/PRI interface. Syntax reset counters controller e1 interface-number Parameters interface-number Example Clear the controller counter for CE1/PRI interface 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference reset counters controller t1 ● 287 reset counters controller t1 Purpose Use the reset counters controller t1 command to clear the controller counter for the CT1/PRI interface. Syntax reset counters controller t1 interface-number Parameters interface-number Example Clear the controller counter for CT1/PRI interface 1/0/0. Interface number.
288 ● reset counters controller t1 3Com Router 5000 Family and Router 6000 Family Command Reference reset counters controller t1 Purpose Use the reset counters controller t1 command to clear the controller counter for the CT1/PRI interface. Syntax reset counters controller t1 interface-number Parameters interface-number Example Clear the controller counter for CT1/PRI interface 1/0/0. Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset counters interface ● 289 reset counters interface Purpose Use the reset counters interface command to reset the statistics about the port. Syntax reset counters interface [ interface_type | interface_type interface_num | interface_name ] Parameters interface_type Port type. interface_num Port number. interface_name Port name in interface_type interface_num format. For parameter description, refer to the interface command.
290 ● reset counters interface 3Com Router 5000 Family and Router 6000 Family Command Reference reset counters interface Purpose Use the reset counters interface command to clear statistics about the transmitted and received packets, IP, ARP, and ICMP on the specified interface or all interfaces. Syntax reset counters interface [ interface-type [ interface-number ] ] Parameters interface-type Interface type. interface-number Interface number. Example Clear the statistics on Serial 0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference reset vlan statistics vid ● 291 reset vlan statistics vid Purpose Use the reset vlan statistics vid command to clear the VLAN statistics. Syntax reset vlan statistics vid vid Parameters vid Example Clear the statistics with VLAN ID 10. VLAN ID, used to identify a VLAN.
292 ● restart 3Com Router 5000 Family and Router 6000 Family Command Reference restart Purpose Use the restart command to reset the physical interface. Syntax restart Parameters None Example Reset the interface Ethernet 1/0/0. [3Com -Ethernet1/0/0] restart View This command can be used in the following views: ■ Description Interface view In some special circumstances, after modifying the operating parameters on an interface for example, the modification cannot take effect immediately.
3Com Router 5000 Family and Router 6000 Family Command Reference reverse-rts Purpose Use the reverse-rts command to reverse RTS signal. Use the undo reverse-rts command to restore the default. Syntax reverse-rts undo reverse-rts Parameters None Default By default, RTS signal reverse is disabled. Example Reverse RTS signal.
294 ● scramble 3Com Router 5000 Family and Router 6000 Family Command Reference scramble Purpose Use the scramble command to enable the POS interface to scramble payload data. Use the undo scramble command to disable data scrambling. Syntax scramble undo scramble Parameters None Default By default, the POS interface is enabled to scramble payload data. Example Disable the POS interface to scramble payload data.
3Com Router 5000 Family and Router 6000 Family Command Reference scramble ● 295 scramble Purpose Use the scramble command to enable payload scrambling on the ATM E1/T1 interface. This, however, does not affect cell headers. Use the undo scramble command to disable payload scrambling. Syntax scramble undo scramble Parameters None Default By default, payload scrambling is enabled on the ATM E1/T1 interface. Example Disable payload scrambling on ATM E1/T1 interface 1/0/0.
296 ● scramble 3Com Router 5000 Family and Router 6000 Family Command Reference scramble Purpose Use the scramble command to enable scrambling function of ATM E3/T3 interface. Use the undo scramble command to disable scrambling function. Syntax scramble undo scramble Parameters None Default By default, scrambling function of ATM E3/T3 interface is enabled. Example Disable scramble function of ATM E3/T3 interface 2/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference scramble ● 297 scramble Purpose Use the scramble command to enable an undo scramble to scramble the payload on ATM OC-3c/STM-1 interface. Use the undo scramble command to disable the scrambling function. Syntax scramble undo scramble Parameters None Default By default, the ATM OC-3c/STM-1 interface is enabled to scramble the payload. Example Disable the ATM interface to scramble the payload.
298 ● sendloopcode 3Com Router 5000 Family and Router 6000 Family Command Reference sendloopcode Purpose Use the sendloopcode command to send the remote loopback control code. Syntax sendloopcode { inband-llb-up | inband-llb-down | fdl-ansi-llb-up | fdl-ansi-llb-down | fdl-ansi-plb-up | fdl-ansi-plb-down | fdl-att-plb-up | fdl-att-plb-down } Parameters inband-llb-up Sends in-band line loopback (LLB) activation request code compliant with the ANSI or AT&T implementation. This enables remote loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference sendloopcode ● 299 In LLB mode, all 193 bits (one synchronization bit and 192 effective bandwidth bits) in a T1 PCM frame are looped back. In PLB mode, however, only 192 effective bandwidth bits are looped back. The format of loopback code can be compliant with ANSI T1.403 or AT&T TR 54016. In SF framing, LLB code is sent using the effective bandwidth (slots 1 through 24).
300 ● shdsl mode 3Com Router 5000 Family and Router 6000 Family Command Reference shdsl mode Purpose Use the shdsl mode command to set the operating mode of the G.SHDSL interface. Use the undo shdsl mode command to restore the default. Syntax shdsl mode { co | cpe } undo shdsl mode Parameters co Sets to the central office (CO) mode. cpe Sets to the customer premises equipment (CPE) mode. Default By default, the G.SHDSL interface is operating in CPE mode.
3Com Router 5000 Family and Router 6000 Family Command Reference shdsl psd ● 301 shdsl psd Purpose Use the shdsl psd command to set PSD of the G.SHDSL interface working as CPE. It is not necessarily the same as the one set at CO. Use the undo shdsl psd command to restore the default.
302 ● shdsl rate 3Com Router 5000 Family and Router 6000 Family Command Reference shdsl rate Purpose Use the shdsl rate command to set single-pair interface rate of the SHDSL interface or just select auto-negotiation mode. You can specify maximum line rate. Use the undo shdsl rate command to restore the default. Syntax shdsl rate { auto | rate } undo shdsl rate Parameters auto Auto-negotiation mode, which is the default. rate Sets maximum single-pair rate of the G.
304 ● shdsl wire 3Com Router 5000 Family and Router 6000 Family Command Reference shdsl wire Purpose Use the shdsl wire command to set the operating mode of the current G.SHDSL interface. Use the undo shdsl wire command to restore the default. Syntax shdsl wire { 2 | 4-auto-enhanced | 4-standard | 4-enhanced } undo shdsl wire Parameters 2 Two-wire mode. 4-auto-enhanced Four-wire auto-switch mode.
3Com Router 5000 Family and Router 6000 Family Command Reference shutdown Purpose Use the shutdown command to shut down the Ethernet port. Use the undo shutdown command to enable the Ethernet port. Syntax shutdown undo shutdown Parameters None Default By default, the Ethernet port is enabled. Example Enable port Ethernet 1/0/1.
306 ● shutdown 3Com Router 5000 Family and Router 6000 Family Command Reference shutdown Purpose Use the shutdown command to shut down the CPOS physical interface. Use the undo shutdown command to enable the CPOS physical interface. Syntax shutdown undo shutdown Parameters None Default By default, the CPOS physical interface is enabled. Example Disable CPOS physical interface 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference shutdown ● 307 shutdown Purpose Use the shutdown command to shut down the interface. Use the undo shutdown command to enable the interface. Syntax shutdown undo shutdown Parameters None Example Shut down Ethernet 0/0/0.
308 ● speed 3Com Router 5000 Family and Router 6000 Family Command Reference speed Purpose Use the speed command to configure the rate of the port. Use the undo speed command to restore the default port rate, that is, negotiation. Syntax speed { 10 | 100 | negotiation } undo speed Parameters Example 10 Port rate is 10 Mbps. 100 Port rate is 100 Mbps. negotiation Port rate is to be negotiated. Set port rate on port Ethernet 1/0/1 to 100 Mbps.
3Com Router 5000 Family and Router 6000 Family Command Reference speed ● 309 speed Purpose Use the speed command to set the operating speed of the Ethernet interface. Use the undo speed command to restore the default operating speed of the Ethernet interface. Syntax speed { 10 | 100 | 1000 | negotiation } undo speed Parameters 10 Forces the Ethernet interface to work at 10 Mbps. 100 Forces the Ethernet interface to work at 100 Mbps.
310 ● sync-clock enable 3Com Router 5000 Family and Router 6000 Family Command Reference sync-clock enable Purpose Use the sync-clock enable command to enable clock synchronization between the router and the OSM board. Use the undo sync-clock enable command to disable clock synchronization between the router and the OSM board. Syntax sync-clock enable undo sync-clock enable Parameters None Default By default, clock synchronization between the router and the OSM board is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference sync-clock interval ● 311 sync-clock interval Purpose Use the sync-clock interval command to set clock synchronization interval between the router and the OSM board. Syntax sync-clock interval inte-value Parameters inte-value Example Set the clock synchronization interval between the router and the OSM board in slot3/0/0 to five minutes. Clock synchronization interval, ranging from 1 to 1440 minutes, defaults to 1 minute.
312 ● t1 bert 3Com Router 5000 Family and Router 6000 Family Command Reference t1 bert Purpose Use the t1 bert command to start a BERT test on the specified T1 line on the CT3 interface. Use the undo t1 bert command to stop the BERT test running on the specified T1 line on the CT3 interface. Syntax t1 line-number bert pattern { 2^11 | 2^15 | 2^20 | 2^23 | qrss } time number [ unframed ] undo t1 line-number bert Parameters Example line-number T1 line number. Valid values are 1 to 28.
3Com Router 5000 Family and Router 6000 Family Command Reference Description t1 bert ● 313 ITU O.151, ITU O.153, and ANSI T1.403-1999 define many BERT patterns, among which, t1 lines on the CT3 interface support only 2^11, 2^15, 2^20, 2^23, and QRSS at present. When running a BERT test, the local end sends out a pattern, which is to be looped over somewhere on the line and back to the local end.
314 ● t1 channel set 3Com Router 5000 Family and Router 6000 Family Command Reference t1 channel set Purpose Use the t1 channel-set command to bundle the timeslots of a T1 line. Use the undo t1 channel-set command to remove the timeslot bundle. Syntax t1 line-number channel-set set-number timeslot-list range [ speed { 56k | 64k } ] undo t1 line-number channel-set set-number Parameters line-number T1 line number. Valid values are 1 to 28.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 channel-set ● 315 t1 channel-set Purpose Use the t1 channel-set command to bundle timeslots on the T1 channel. Use the undo t1 channel-set command to remove the bundle. Syntax t1 t1-number channel-set set-number timeslot-list range [ speed { 56k | 64k } ] undo t1 t1-number channel-set set-number Parameters Example t1-number Number of a T1 channel on the CPOS interface. Valid values are 1 to 84. set-number Channel set number.
316 ● t1 set clock 3Com Router 5000 Family and Router 6000 Family Command Reference t1 set clock Purpose Use the t1 set clock command to configure the clock mode of T1 channel. Use the undo t1 set clock command to restore the default or slave. Syntax t1 t1-number set clock { master | slave } undo t1 t1-number set clock Parameters Example t1-number Number of a T1 channel on the CPOS. Valid values are 1 to 84. Master Set the clock mode of T1 channel to master.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 set clock ● 317 t1 set clock Purpose Use the t1 set clock command to set the clock mode for a T1 line on the CT3 interface. Use the undo e1 clock command to restore the default or line clock. Syntax t1 line-number set clock { master | slave } undo t1 line-number set clock Parameters Example line-number T1 line number. Valid values are 1 to 28. master Internal clock. slave Line clock.
318 ● t1 set fdl 3Com Router 5000 Family and Router 6000 Family Command Reference t1 set fdl Purpose Use the t1 set fdl command to set the behavior of the specified T1 line on the FDL in ESF framing. Use the undo t1 set fdl command to disable FDL of T1. Syntax t1 line-number set fdl ansi undo t1 line-number set fdl ansi Parameters line-number T1 line number. Valid values are 1 to 28. fdl Sets the FDL format of T1. ansi Implements ANSI T1.403 FDL. Default By default, ANSI T1.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 set frame-format ● 319 t1 set frame-format Purpose Use the t1 set frame-format command to set a frame format for T1 channel. Use the undo t1 set frame-format command to restore the default or ESF. Syntax t1 t1-number set frame-format { esf | sf } undo t1 t1-number set frame-format Parameters Example t1-number Number of a T1 channel on the CPOS interface. Valid values are 1 to 84.
320 ● t1 set frame-format 3Com Router 5000 Family and Router 6000 Family Command Reference t1 set frame-format Purpose Use the t1 set frame-format command to configure the frame format of T1 line. Use the undo t1 set frame-format command to restore the default or esf. Syntax t1 line-number set frame-format { esf | sf } undo t1 line-number set frame-format Parameters Example line-number T1 line number. Valid values are 1 to 28. esf Set the T1 line to use the ESF format.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 set loopback ● 321 t1 set loopback Purpose Use the t1 set loopback command to set the loopback mode of a T1 line on the T3 interface. Use the undo t1 set loopback command to disable the T1 line to loop back. Syntax t1 line-number set loopback { local | remote | payload } undo t1 line-number set loopback Parameters line-number T1 line number. Valid values are 1 to 28. local Enables the T1 line to perform local loopback.
322 ● t1 set loopback 3Com Router 5000 Family and Router 6000 Family Command Reference t1 set loopback Purpose Use the t1 set loopback command to configure the loopback mode of the T1 channel. Use the undo t1 set loopback command to disable loopback (default). Syntax t1 t1-number set loopback { local | remote } undo t1 t1-number set loopback Parameters Example t1-number Number of a T1 channel on the CPOS interface. Valid values are 1 to 84. local Places the T1 channel in local loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 sendloopcode ● 323 t1 sendloopcode Purpose Use the t1 sendloopcode command to set the loopback mode of the specified far-end T1 line. Use the undo t1 sendloopcode command to remove the corresponding setting.
324 ● t1 sendloopcode 3Com Router 5000 Family and Router 6000 Family Command Reference You may transmit loopback control code through the in-band signal (the 192 effective bandwidth bits or all 193 bits of T1) or the FDL in ESF frames.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 show ● 325 t1 show Purpose Use the t1 show command to view the line state of the specified T1 line on the CT3 interface. Syntax t1 line-number show Parameters line-number T1 line number. Valid values are 1 to 28. show Displays the physical line state of the specified T1 line. Example Display line state of T1 line 1 on CT3 interface 3/0/0.
326 ● t1 show 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the t1 show command (continued) View Field Description Bits received (since latest sync): 0 Kbits Number of bits received since the last synchronization This command can be used in the following views: ■ CT3 Interface view
3Com Router 5000 Family and Router 6000 Family Command Reference t1 shutdown ● 327 t1 shutdown Purpose Use the t1 shutdown command to shut down a T1 channel. Use the undo t1 shutdown command to enable the T1 channel. Syntax t1 t1-number shutdown undo t1 t1-number shutdown Parameters t1-number Default By default, T1 channel is enabled. Example Shut down T1 channel 1. Number of a T1 channel on the CPOS interface. Valid values are 1 to 84.
328 ● t1 shutdown 3Com Router 5000 Family and Router 6000 Family Command Reference t1 shutdown Purpose Use the t1 shutdown command to shut down a T1 line on the CT3 interface. Use the undo t1 shutdown command to open a T1 line. Syntax t1 line-number shutdown undo t1 line-number shutdown Parameters line-number Default By default, T1 lines are open. Example Shut down the first T1 line on the T3 interface. T1 line number. Valid values are 1 to 28.
3Com Router 5000 Family and Router 6000 Family Command Reference t1 unframed ● 329 t1 unframed Purpose Use the t1 unframed command to set a T1 channel on the CPOS interface to unframed mode. Use the undo t1 unframed command to restore the default, channelized mode. Syntax t1 t1-number unframed undo t1 t1-number unframed Parameters t1-number Example Set T1 channel 3 on the CPOS interface 1/0/0 to operate in unframed mode. Number of a T1 channel on the CPOS interface. Valid values are 1 to 84.
330 ● t1 unframed 3Com Router 5000 Family and Router 6000 Family Command Reference t1 unframed Purpose Use the t1 unframed command to set a T1 line on the CT3 interface to work in unframed mode (T1 mode). Use the undo t1 unframed command to set the T1 line on the CT3 interface to work in framed mode (CT1 mode). Syntax t1 line-number unframed undo t1 line-number unframed Parameters line-number Default By default, T1 lines are working in framed mode.
3Com Router 5000 Family and Router 6000 Family Command Reference upgrade flash ● 331 upgrade flash Purpose Use the upgrade flash command to upgrade the software of the card. To have the upgraded software take effect, reboot the router. Syntax upgrade flash file-name { full | part } Parameters file-name File name read from Flash. full Updates the whole mirror. part Updates part of the mirror. Example Upgrade the whole mirror of the card using the bcm6348.bin file.
332 ● using (CE1/PRI Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference using (CE1/PRI Interface) Purpose Use the using command to configure the operating mode of the CE1/PRI interface. Use the undo using command to restore the default or CE1/PRI mode. Syntax using { ce1 | e1 } undo using Parameters Example e1 The interface is operating in E1 mode. ce1 The interface is operating in CE1/PRI mode. Set the CE1/PRI interface to work in E1 mode.
3Com Router 5000 Family and Router 6000 Family Command Reference using (CE3 Interface) ● 333 using (CE3 Interface) Purpose Use the using command to configure the operating mode of a CE3 interface. Use the undo using command to restore the default setting. Syntax using { e3 | ce3 } undo using Parameters e3 Sets the CE3 interface to work in unchannelized mode. ce3 Sets the CE3 interface to work in channelized mode. Default By default, the CE3 interface is working in channelized mode.
334 ● using (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family Command Reference using (CT3 Interface) Purpose Use the using command to configure the operating mode of a CT3 interface. Use the undo using command to restore the default or channelized mode. Syntax using { t3 | ct3 } Parameters t3 Sets the CT3 interface to work in unchannelized mode. ct3 Sets the CT3 interface to work in channelized mode. Example Configure the interface T3 1/0/0 to work in unchannelized mode.
3Com Router 5000 Family and Router 6000 Family Command Reference virtualbaudrate ● 335 virtualbaudrate Purpose Use the virtualbaudrate command to set a virtual baudrate for the DTE interface. Use the undo virtualbaudrate command to cancel the specified virtual baudrate. Syntax virtualbaudrate virtualbaudrate undo virtualbaudrate Parameters virtualbaudrate Example Set virtual baudrate of a DTE interface to 19200.
336 ● vlan-type dot1q vid 3Com Router 5000 Family and Router 6000 Family Command Reference vlan-type dot1q vid Purpose Use the vlan-type dot1q command to set the encapsulation types on the sub-interface. Syntax vlan-type dot1q vid vid Parameters vid Default By default, there is no encapsulation on the subinterface, nor VLAN ID related to the subinterface. Example Set the Ethernet sub-interface 2/0/0.1 to be related to VLAN ID 60, and its encapsulation format is dot1q. VLAN ID identifying a VLAN.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 LINK LAYER PROTOCOL ALPHABETICAL LISTING OF COMMANDS annexg 7 atm-class 8 atm class 9 atm-ctt 10 atm-link check 11 bridge aging-time 12 bridge bridge-set enable 13 bridge bridging 14 bridge enable 15 bridge learning 16 bridge mac-address 17 bridge routing 18 bridge routing-enable 19 bridge-set 20 bridge-set stp enable 21 bridge-set stp port pathcost 22 bridge-set stp port priority 23 bridge stp ieee 24 bridge stp max-age 25 bridge stp pr
2● 3Com Router 5000 Family and Router 6000 Family Command Reference debugging pppoe-client 54 debugging pppofr 55 debugging slip 56 debugging stp 57 debugging x25 59 debugging x25 x2t 60 debugging x25 xot 61 dialer isdn-leased 62 display atm class 63 display atm interface 64 display atm map-info 66 display atm pvc-group 68 display atm pvc-info 70 display bridge address-table 72 display bridge information 74 display bridge spanning tree 76 display bridge traffic 78 display firewall ethernet-frame-filter 80
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 x2t switch-table 128 display x25 xot 129 dlsw ethernet-frame-filter 130 enable deactivate 131 encapsulation 132 firewall ethernet-frame-filter 134 fr bump 135 fr compression iphc 136 fr compression frf9 137 fr dlci 138 fr dlci-switch 139 fr inarp 140 fr interface-type 142 fr ip-dscp 143 fr ip-precedence 144 fr iphc 145 fr lmi n391dte 146 fr lmi n392dce 147 fr lmi n392dte 148 fr lmi n393dce 149 fr lmi n393dte 150 fr lmi t392dce 151
4● 3Com Router 5000 Family and Router 6000 Family Command Reference isdn number-property 187 isdn overlap-sending 191 isdn pri-slipwnd-size 192 isdn protocol-mode 193 isdn protocol-type 194 isdn q921-permanent 196 isdn send-restart 197 isdn spid auto_trigger 198 isdn spid nit 199 isdn spid resend 200 isdn spid service 201 isdn spid timer 202 isdn spid1 203 isdn spid2 204 isdn statistics 205 isdn two-tei 207 lapb retry 208 lapb window-size 209 lapd modulo 210 lapd timer 211 link-protocol fr 212 link-protoc
3Com Router 5000 Family and Router 6000 Family Command Reference ppp chap password 247 ppp compression iphc 248 ppp compression iphc rtp-connections 249 ppp compression iphc tcp-connections 250 ppp compression stac-lzs 251 ppp ipcp dns 252 ppp ipcp dns admit-any 253 ppp ipcp dns request 254 ppp ipcp remote-address forced 255 ppp lcp mru consistent 256 ppp lqc 257 ppp mp 259 ppp mp binding-mode 260 ppp mp lfi 261 ppp mp lfi 262 ppp mp lfi delay-per-frag 263 ppp mp max-bind 264 ppp mp min-bind 265 ppp mp min
6● 3Com Router 5000 Family and Router 6000 Family Command Reference service vbr-nrt 306 service vbr-rt 308 shutdown 310 timer hold 311 timer hold 312 timer hold 313 translate ip 314 translate x25 315 transmit-priority 316 x25 alias-policy 317 x25 call-facility 319 x25 cug-service 321 x25 default-protocol 323 x25 hunt-group 324 x25 ignore called-address 325 x25 ignore calling-address 326 x25 local-cug 327 x25 map 328 x25 map bridge 331 x25 modulo 332 x25 packet-size 333 x25 pvc 335 x25 queue-length 337 x25
3Com Router 5000 Family and Router 6000 Family Command Reference annexg ● 7 annexg Purpose Use the annexg command to enable T1.617 Annext G on the frame relay interface for data transmission. Use the undo annexg command to disable T1.617 Annext G on the frame relay interface. Syntax annexg { dte | dce } undo annexg { dte | dce } Parameters dte Annex G DTE mode. dce Annex G DCE mode. Default By default, T1.617 Annext G is disabled on the frame relay interface. Example Enable T1.
8 ● atm-class 3Com Router 5000 Family and Router 6000 Family Command Reference atm-class Purpose Use the atm-class command to apply a set of parameters (which are defined in ATM-Class) to an ATM interface or a PVC. Use the undo atm-class command to delete the specified ATM-Class. Syntax atm-class atm-class-name undo atm-class atm-class-name Parameters atm-class-name Example Apply an ATM-Class named "main" to the interface Atm1/0/0. Name of ATM-Class.
3Com Router 5000 Family and Router 6000 Family Command Reference atm class ● 9 atm class Purpose Use the atm class command to create an ATM-Class and enter the ATM-Class view. Use the undo atm class command to delete the specified ATM-Class. Syntax atm class atm-class-name undo atm class atm-class-name Parameters atm-class-name Example Create an ATM-Class named "main". Name of ATM-Class.
10 ● atm-ctt 3Com Router 5000 Family and Router 6000 Family Command Reference atm-ctt Purpose Use the atm-ctt command to set all interfaces on a board to transparent transmission. Use the undo atm-ctt command to set all interfaces on a board to non transparent transmission state. Syntax atm-ctt undo atm-ctt Parameters None Default By default, all interfaces on all boards are in non transparent transmission state. Example Set the board to transparent transmission.
3Com Router 5000 Family and Router 6000 Family Command Reference atm-link check ● 11 atm-link check Purpose Use the atm-link check command to have the protocol state of the ATM P2P subinterface changes depending on whether the physical interface is up and whether a PVC is configured on the subinterface. Use the undo atm-link check command to restore the default protocol state on the ATM P2P subinterface.
12 ● bridge aging-time 3Com Router 5000 Family and Router 6000 Family Command Reference bridge aging-time Purpose Use the bridge aging-time command to configure the aging time of the dynamic address table. Use the undo bridge aging-time command to restore the default aging time of the dynamic address table. Syntax bridge aging-time seconds undo bridge aging-time Parameters seconds Example Configure the aging time of the dynamic address table to 500 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge bridge-set enable ● 13 bridge bridge-set enable Purpose Use the bridge bridge-set enable command to enable the specified bridge set. Use the undo bridge bridge-set enable command to disable the specified bridge set. Syntax bridge bridge-set enable undo bridge bridge-set enable Parameters bridge-set Example Enable bridge-set 1. Bridge-set number. Valid values are 1 to 255.
14 ● bridge bridging 3Com Router 5000 Family and Router 6000 Family Command Reference bridge bridging Purpose Use the bridge bridging command to enable the bridging functuin of a network layer protocol on a specified bridge set. Use the undo bridge bridging command to disable the bridging function of a network layer protocol on specified bridge set. Syntax bridge bridge-set bridging { ip | ipx | others} undo bridge bridge-set bridging { ip | ipx | others } Parameters bridge-set Bridge set number.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge enable ● 15 bridge enable Purpose Use the bridge enable command to enable the bridging function. Use the undo bridge enable command to disable the bridging function. Syntax bridge enable undo bridge enable Parameters None Default By default, the bridging function is disabled. Example Disable the bridging function.
16 ● bridge learning 3Com Router 5000 Family and Router 6000 Family Command Reference bridge learning Purpose Use the bridge learning command to enable forwarding by dynamic address table. Use the undo bridge learning command to disable forwarding by dynamic address table and forward by static address table only. Syntax bridge bridge-set learning undo bridge bridge-set learning Parameters bridge-set Default By default, the dynamic address table is used in forwarding.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge mac-address ● 17 bridge mac-address Purpose Use the bridge mac-address command to manually configure a static address table entry of bridge. Use the undo bridge mac-address command to delete the static address entry.
18 ● bridge routing 3Com Router 5000 Family and Router 6000 Family Command Reference bridge routing Purpose Use the bridge routing command to enable the routing function of a specified bridge-set for the specified network protocol. Use the undo bridge routing command to disable the routing function of the bridge-set for the specified network protocol. Syntax bridge bridge-set routing { ip | ipx } undo bridge bridge-set routing { ip | ipx } Parameters bridge-set Bridge-set number.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge routing-enable ● 19 bridge routing-enable Purpose Use the bridge routing-enable command to enable the routing function of the bridge. Use the undo bridge routing-enable command to disable the routing function of the bridge. Syntax bridge routing-enable undo bridge routing-enable Parameters None Default By default, the routing function of the bridge is disabled. Example Enable routing on the bridge.
20 ● bridge-set 3Com Router 5000 Family and Router 6000 Family Command Reference bridge-set Purpose Use the bridge set command to add an interface to a bridge set. Use the undo bridge set command to delete the interface from the bridge set. Syntax bridge-set bridge-set undo bridge-set bridge-set Parameters bridge-set Default By default, no interface is added to the bridge set. Example Add Ethernet0/0/0 to bridge set 1. Bridge set number. Valid values are an integer from 1 to 255.
22 ● bridge-set stp port pathcost 3Com Router 5000 Family and Router 6000 Family Command Reference bridge-set stp port pathcost Purpose Use the bridge-set stp port pathcost command to configure the path cost of the bridge port. Use the undo bridge-set stp port pathcost command to restore the default. Syntax bridge-set bridge-set stp port pathcost cost undo bridge-set bridge-set stp port pathcost Parameters Example bridge-set Number of a bridge set. Valid values are 1 to 255.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge-set stp port priority ● 23 bridge-set stp port priority Purpose Use the bridge-set stp port priority command to configure the priority of the bridge port. Use the undo bridge-set stp port priority command to restore the default priority of the bridge port. Syntax bridge-set bridge-set stp port priority value undo bridge-set bridge-set stp port priority Parameters Example bridge-set Number of a bridge set.
24 ● bridge stp ieee 3Com Router 5000 Family and Router 6000 Family Command Reference bridge stp ieee Purpose Use the bridge stp ieee command to specify a bridge set to support IEEE STP. Use the undo bridge stp ieee command to disable a bridge set to support STP. Syntax bridge bridge-set stp ieee undo bridge bridge-set stp ieee Parameters bridge-set Number of a bridge set. Valid values are an integer between 1 and 255. ieee Ethernet spanning tree protocol (STP).
3Com Router 5000 Family and Router 6000 Family Command Reference bridge stp max-age ● 25 bridge stp max-age Purpose Use the bridge stp max-age command to set the Max Age timer on the bridge. Use the undo bridge stp max-age command to restore the default. Syntax bridge stp max-age seconds undo bridge stp max-age Parameters seconds Example Set the Max Age timer on the bridge to 30 seconds. Value for the Max Age timer on the bridge. Valid values are 6 to 40 seconds.
26 ● bridge stp priority 3Com Router 5000 Family and Router 6000 Family Command Reference bridge stp priority Purpose Use the bridge stp priority command to assign a priority to the bridge. Use the undo bridge stp priority command to restore the default priority of the bridge. Syntax bridge stp priority value undo bridge stp priority Parameters value Example Set the bridge priority to 500. Bridge priority. Valid values are 0 to 65,535. If no value is specified, the default value is 32,768.
3Com Router 5000 Family and Router 6000 Family Command Reference bridge stp timer forward-delay ● 27 bridge stp timer forward-delay Purpose Use the bridge stp timer forward-delay command to set the Forward Delay timer on the bridge. Use the undo bridge stp timer forward-delay command to restore the default. Syntax bridge stp timer forward-delay seconds undo bridge stp timer forward-delay Parameters seconds Example Set the Forward Delay timer on the bridge to 50 seconds.
28 ● bridge stp timer hello 3Com Router 5000 Family and Router 6000 Family Command Reference bridge stp timer hello Purpose Use the bridge stp timer hello command to set the Hello Time timer on the bridge. Use the undo bridge stp timer hello command to restore the default. Syntax bridge stp timer hello seconds undo bridge stp timer hello Parameters seconds Example Set the Hello Time timer on the bridge to 5 seconds. Value for the Hello Time timer on the bridge (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference bridge vlanid-transparent-transmit enable ● 29 bridge vlanid-transparent-transmit enable Purpose Use the bridge vlanid-transparent-transmit enable command to enable VLAN ID transparent transmission. Use the undo bridge vlanid-transparent-transmit enable to disable VLAN ID transparent transmission.
30 ● bump 3Com Router 5000 Family and Router 6000 Family Command Reference bump Purpose Use the bump command to configure the standby PVC that will take over when a specified PVC goes down. Use the undo bump command to remove the backup configuration. Syntax bump { pvc-name [ vpi/vci ] | vpi/vci } grade undo bump { pvc-name [ vpi/vci ] | vpi/vci } Parameters pvc-name PVC name, a case-insensitive string up to 16 characters. It must be unique on an ATM interface and cannot be any valid VPI/VCI pair.
3Com Router 5000 Family and Router 6000 Family Command Reference Description Related Commands bump ● 31 The standby PVC configured using this command must be in the same PVC group as the PVC to be backed up.
32 ● cell-packing 3Com Router 5000 Family and Router 6000 Family Command Reference cell-packing Purpose Use the cell-packing command to set the maximum number of cells to be packed in one PVC. Use the undo cell-packing command to restore to the default value. Syntax cell-packing cell-number undo cell-packing Parameters cell-number Default By default, the maximum number of packet is one. Example Configure on PVC1/32 the maximum number of cells to be packed to 22.
3Com Router 5000 Family and Router 6000 Family Command Reference channel ● 33 channel Purpose Use the channel command to add X.25 interface or XOT channel of one serial port to the current hunt group. Use the undo channel command to delete the specified interface or XOT channel from the current hunt group. Syntax channel { interface serial interface-number | xot ip-address } undo channel { interface serial interface-number | xot ip-address } Parameters Example interface-number Interface number.
34 ● channel-set timeslot 3Com Router 5000 Family and Router 6000 Family Command Reference channel-set timeslot Purpose Use the channel-set timeslot command to configure a B channel for leased line service. Use the undo channel-set timeslot command to remove both the leased line configuration of a B channel and the serial interface created by the channel-set timeslot command.
3Com Router 5000 Family and Router 6000 Family Command Reference channel-set timeslot ● 35 On an ISDN BRI interface configured with the channel-set timeslot command, you cannot configure leased line service with the dialer isdn-leased command.
36 ● clock 3Com Router 5000 Family and Router 6000 Family Command Reference clock Purpose Use the clock command to specify ATM interface to use internal transmission clock signal. Use the undo clock command to restore the usage of network clock signal. Syntax clock { master | slave } undo clock Parameters master Specify ATM interface to use the internal transmission clock signal. slave Restore the line clock signal. Default By default, ATM interface uses the network clock signal.
3Com Router 5000 Family and Router 6000 Family Command Reference datetime local ● 37 datetime local Purpose Use the datetime local command to configure the Datetime information element in the Connect message to use local time in an ISDN call. Use the undo datetime command to configure the Datetime information element not to use local time. Syntax datetime local undo datetime Parameters None Default By default, no local time is used.
38 ● debugging atm all 3Com Router 5000 Family and Router 6000 Family Command Reference debugging atm all Purpose Use the debugging atm all command to enable all the debugging switches of ATM. Use the undo debugging atm all command to disable the debugging. Syntax debugging atm all undo debugging atm all Parameters None Default By default, all the ATM debugging switches are disabled. Example Refer to the examples for the commands debugging atm error, debugging atm event, and debugging atm packet.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging atm error ● 39 debugging atm error Purpose Use the debugging atm error command to enable the error debugging of ATM. Use the undo debugging atm error command to disable the debugging.
40 ● debugging atm event 3Com Router 5000 Family and Router 6000 Family Command Reference debugging atm event Purpose Use the debugging atm event command to enable the event debugging of ATM. Use the undo debugging atm event command to disable the debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging atm packet ● 41 debugging atm packet Purpose Use the debugging atm packet command to enable the packet debugging of ATM. Use the undo debugging atm packet command to disable the debugging.
42 ● debugging atm packet View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description User view If no interface is specified, all ATM packet debugging, global, interface level, or PVC level, is enabled. After the packet switch is enabled, the detailed information about receiving/sending packets at the ATM interface or PVC will be displayed. This will be very helpful for system troubleshooting.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging bridge ● 43 debugging bridge Purpose Use the debugging bridge command to enable the debugging function of a bridge set. Use the undo debugging bridge command to disable the debugging function. Syntax debugging bridge eth-forwarding [ dlsw | interface interface-type interface-number ] undo debugging bridge eth-forwarding [ dlsw | interface interface-type interface-number ] Parameters Example interface-type Interface type.
44 ● debugging fr 3Com Router 5000 Family and Router 6000 Family Command Reference debugging fr Purpose Use the debugging fr command to enable frame relay information debugging. Use the undo debugging fr command to disable frame relay information debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference Example debugging fr ● 45 Enable the FRTS congestion management debugging of serial interface 5/0/1. <3Com> debugging fr congestion interface serial 5/0/1 Enable DE debugging of FRTS on serial interface 5/0/1. <3Com> debugging fr de interface serial 5/0/1 Enable FRTS transmit rate debugging of serial interface 5/0/1.
46 ● debugging fr compress 3Com Router 5000 Family and Router 6000 Family Command Reference debugging fr compress Purpose Use the debugging fr compress command to enable FRF9 IPHC debugging of frame relay. Use the undo debugging fr compress command to disable FRF9 IPHC debugging of frame relay.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging fr compression ● 47 debugging fr compression Purpose Use the debugging fr compression iphc command to enable FRF20 IPHC debugging of frame relay. Use the undo debugging fr compression iphc command to disable FRF20 IPHC debugging of frame relay.
48 ● debugging fr pvc-group 3Com Router 5000 Family and Router 6000 Family Command Reference debugging fr pvc-group Purpose Use the debugging fr pvc-group command to enable debugging for the specified PVC group or all PVC groups. Use the undo debugging fr pvc-group command to disable the debugging output.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging isdn ● 49 debugging isdn Purpose Use the debugging isdn command to enable ISDN debugging. Use the undo debugging isdn command to disable ISDN debugging. Syntax debugging isdn { cc | q921 | q931 | qsig | | spid } [ interface type number ] undo debugging isdn { cc | q921 | q931| qsig | spid } [ interface type number ] Parameters Example cc Enables ISDN CC module debugging. q921 Enables Q.921 debugging. q931 Enables ISDN Q.
50 ● debugging lapd 3Com Router 5000 Family and Router 6000 Family Command Reference debugging lapd Purpose Use the debugging lapb command to enable LAPB debugging. Use the undo debugging lapb command to disable LAPB debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pad ● 51 debugging pad Purpose Use the debugging pad command to enable PAD debugging. Use the undo debugging pad command to disable PAD debugging. Syntax debugging pad { all | error | event | packet } undo debugging pad { all | error | event | packet } Parameters Example all All PAD debugging. error PAD error debugging. event PAD event debugging. packet PAD packet debugging. Enable PAD packet debugging.
52 ● debugging ppp compression iphc rtp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ppp compression iphc rtp Purpose Use the debugging ppp compression iphc rtp command to view debugging information about IP/UDP/RTP header compression in IP header compression. Use the undo debugging ppp compression iphc rtp command to disable IP/UDP/RTP header debugging in IP header compression.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ppp compression iphc tcp ● 53 debugging ppp compression iphc tcp Purpose Use the debugging ppp compression iphc tcp command to view the single packet information of the IP/TCP header compression. Use the undo debugging ppp compression iphc tcp command to disable IP/TCP header debugging in IP header compression.
54 ● debugging pppoe-client 3Com Router 5000 Family and Router 6000 Family Command Reference debugging pppoe-client Purpose The command debugging pppoe-client is used to enable PPPoE Client debugging switch. Syntax debugging pppoe-client option [ interface type number ] Parameters option PPPoE Client debugging switch type, see the following table for more details. interface type number Interface type and number, used to enable the debugging switch of the specified interface.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pppofr ● 55 debugging pppofr Purpose Use the debugging pppofr command to enable PPPoFR debugging. Use the undo debugging pppofr command to disable PPPoFR debugging. Syntax debugging pppofr { all | packet | event } [ interface virtual-template number ] Parameters all Enable all PPPoFR debugging switches. packet Enable PPPoFR packet debugging switch. event Enable event debugging switch.
56 ● debugging slip 3Com Router 5000 Family and Router 6000 Family Command Reference debugging slip Purpose Use the debugging slip command to enable the debugging switch of the SLIP protocol. Syntax debugging slip { event | error | packet | all } Parameters packet Enables packet debugging. event Enables event debugging. error Enables error debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging stp ● 57 debugging stp Purpose Use the debugging stp command to enable STP debugging. Use the undo debugging stp command to disable STP debugging. Syntax debugging stp { error | event | packet } undo debugging stp { error | event | packet } Parameters Example error Enables STP error debugging. event Enables STP event debugging. packet Enables STP packet debugging. Enable STP packet debugging.
58 ● debugging stp 3Com Router 5000 Family and Router 6000 Family Command Reference STP STP STP STP STP STP STP STP STP STP : : : : : : : : : : HelloTicks is run Port 0 id is 1,port state is 0,designatedport is 0 Port 0 id is 2,port state is 0,designatedport is 0 Creat HoldTimer on port 3 ,timeout is 1 Port 32771 id is 3,port state is 4,designatedport is 32771 Creat HoldTimer ,timeout is 2 HoldTicks is run on port 3 HelloTicks is run Creat TcnTimer ,timeout is 2 Delete tcn timer id 5413032 Table 2 Descr
3Com Router 5000 Family and Router 6000 Family Command Reference debugging x25 ● 59 debugging x25 Purpose Use the debugging x25 command to enable X.25 debugging. Use the undo debugging x25 command to disable X.25 debugging. Syntax debugging x25 { all | error | event | packet } undo debugging x25 { all | error | event | packet } Parameters Example all All X.25 debugging. error X.25 error debugging. event X.25 event debugging. packet X.25 packet debugging. Enable X.25 error debugging.
60 ● debugging x25 x2t 3Com Router 5000 Family and Router 6000 Family Command Reference debugging x25 x2t Purpose Use the debugging x25 x2t command to enable X2T debugging. Use the undo debugging x25 x2t to disable X2T debugging. Syntax debugging x25 x2t { all | event | packet } undo debugging x25 x2t { all | event | packet } Parameters Example all All X2T debugging. event X2T event debugging. packet X2T packet debugging. Enable all X2T debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging x25 xot ● 61 debugging x25 xot Purpose Use the debugging x25 xot command to enable XOT debugging Use the undo debugging x25 xot command to disable XOT debugging. Syntax debugging x25 xot { all | event | packet } undo debugging x25 xot { all | event | packet } Parameters Example all All XOT debugging. event XOT event debugging. packet XOT packet debugging. Enable XOT packet debugging.
62 ● dialer isdn-leased 3Com Router 5000 Family and Router 6000 Family Command Reference dialer isdn-leased Purpose Use the dialer isdn-leased 128k command to configure 128K leased line connection. Use the undo dialer isdn-leased 128k command to delete 128K leased line connection. Use the dialer isdn-leased number command to configure 64K leased line connection. Use the undo dialer isdn-leased number command to delete 64K leased line connection.
3Com Router 5000 Family and Router 6000 Family Command Reference display atm class ● 63 display atm class Purpose Use the display atm class command to view the information about ATM-Class. By default, if no ATM-Class name is specified, the information of all ATM-Class is displayed. Syntax display atm class [ atm-class-name ] Parameters atm-class-name Example Display the information about the ATM-Class named "main" in devices. ATM-Class name.
64 ● display atm interface 3Com Router 5000 Family and Router 6000 Family Command Reference display atm interface Purpose Use the display atm map-info command to view the information about the upper layer protocol mapping table of ATM. Syntax display atm interface [ interface-type interface-num ] Parameters interface-type Interface type, specifies an ATM interface together with interface-num. interface-num Interface number, specifies an ATM interface together with interface-type.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command display atm display atm interface ● 65
66 ● display atm map-info 3Com Router 5000 Family and Router 6000 Family Command Reference display atm map-info Purpose Use the display atm map-info command to view the information about the upper layer protocol mapping table of ATM. Syntax display atm map-info [ interface interface-type interface-num [ pvc { pvc-name | vpi/vci } ] ] Parameters interface-type Interface type, specifies an ATM interface together with interface-num.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ map bridge ■ map ip ■ map ppp display atm map-info ● 67
68 ● display atm pvc-group 3Com Router 5000 Family and Router 6000 Family Command Reference display atm pvc-group Purpose Use the display atm pvc-group command to view the information about PVC-Group. Syntax display atm pvc-group [ interface interface-type interface-num [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] Parameters interface-type Interface type, specifies an ATM interface together with interface-num. interface-num Interface number, specifies an ATM interface together with interface-type.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command pvc-group display atm pvc-group ● 69
70 ● display atm pvc-info 3Com Router 5000 Family and Router 6000 Family Command Reference display atm pvc-info Purpose Use the display atm pvc-info command to view the information about PVC. Syntax display atm pvc-info [ interface interface-type interface-num [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] Parameters interface-type Interface type, specifies an ATM interface together with interface-num. interface-num Interface number, specifies an ATM interface together with interface-type.
3Com Router 5000 Family and Router 6000 Family Command Reference display atm pvc-info ● 71 output pkts: 13905, output bytes: 513668, output pkt errors: 0 Interface State: UP, OAM State: UP, PVC State: UP Output queue : (Urgent queue : Size/Length/Discards) 0/50/0 Output queue : (Protocol queue : Size/Length/Discards) 0/500/0 Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0 OAM cells received: 0 F5 InEndloop: 0, F5 InAIS: 0, F5 InRDI: 0 OAM cells sent: 0 F5 OutEndloop: 0 OAM cell drops: 0 Table
72 ● display bridge address-table 3Com Router 5000 Family and Router 6000 Family Command Reference display bridge address-table Purpose Use the display bridge address-table command to view the information of MAC address forwarding table. Syntax display bridge address-table [ bridge-set bridge-set | interface interface-type interface-number | mac mac-address | dlsw ] [ dynamic | static ] Parameters bridge-set Bridge set number. Valid values are 1 to 255. interface-type Interface type.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display bridge address-table ● 73
74 ● display bridge information 3Com Router 5000 Family and Router 6000 Family Command Reference display bridge information Purpose Use the display bridge information command to view the information of one or all the enabled bridge sets in bridge module. Syntax display bridge information [ bridge-set bridge-set ] Parameters bridge-set Example Display the information of all the enabled bridge sets. Bridge set number. Valid values are 1 to 255.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display bridge information ● 75
76 ● display bridge spanning tree 3Com Router 5000 Family and Router 6000 Family Command Reference display bridge spanning tree Purpose Use the display bridge spanning-tree command to view STP state and statistics for traffic analysis and control. Syntax display bridge spanning-tree Parameters None Example Display STP state and statistics. [Router] display bridge spanning-tree Current root is me.
3Com Router 5000 Family and Router 6000 Family Command Reference display bridge spanning tree ● 77 Table 1 Description on the fields of the display bridge spanning-tree View Field Description cost of root path Cost of the root path Topology change flag Topology change flag Topology change detected flag Topology change detected flag Times Time hold Hold-in time hello hello time max age Maximum age aging The valid time for forwarding entries of bridge forwarding tables Timers Timers he
78 ● display bridge traffic 3Com Router 5000 Family and Router 6000 Family Command Reference display bridge traffic Purpose Use the display bridge traffic command to view the traffic statistics on an interface. Syntax display bridge traffic [ bridge-set bridge-set | interface interface-type interface-number | dlsw ] Parameters bridge-set Bridge set number. Valid values are 1 to 255. interface-type Interface type. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display bridge traffic ● 79 Table 1 Description on the fields of the display bridge traffic command View Field Description Input Type and quantity of input packets on the interface. “10 total,1bpdu, 2 single” indicates there are totally 10 data packets input, with 1 BPDU packet and 2 single broadcast packets. Output Type and quantity of output packets on the interface. Send way Way of data transmission.
80 ● display firewall ethernet-frame-filter 3Com Router 5000 Family and Router 6000 Family Command Reference display firewall ethernet-frame-filter Purpose Use the display firewall ethernet-frame-filter command to view the filtering statistics by ACL on the interface, namely, the detailed filtering information based on the ACL configured via the firewall ethernet-frame-filter { acl-number | acl-name } { inbound | outbound } command.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr compress ● 81 display fr compress Purpose Use the display fr compress command to view the statistics information of the frame relay compression. Syntax display fr compress [ interface interface-type interface-number ] Parameters interface-type interface-number Example Specifies an interface. View the frame relay compression statistics information of MFR interface 4/0/0.
82 ● display fr dlci-switch 3Com Router 5000 Family and Router 6000 Family Command Reference display fr dlci-switch Purpose Use the display fr dlci-switch command to view the information of the configured FR switching to check if the frame relay switching of a user is correctly configured. Syntax display fr dlci-switch [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. It can only be a main interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr inarp-info ● 83 display fr inarp-info Use the display fr inarp-info command to view statistics about frame relay inverse ARP (INARP) packets, including requests and replies. Syntax display fr inarp-info [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. It can only be a main interface. Display statistics about frame relay INARP packets.
84 ● display fr interface 3Com Router 5000 Family and Router 6000 Family Command Reference display fr interface Purpose Use the display fr interface command to view frame relay state on the specified or all interfaces. Syntax display fr interface interface-type interface-num Parameters interface-type interface-num Example Specifies an interface. It can be a main interface or a sub-interface. Display frame relay state on all interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr lmi-info ● 85 display fr lmi-info Purpose Use the display fr lmi-info command to view the statistics of LMI protocol frame. Syntax display fr lmi-info [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. Display the statistics of LMI protocol frame.
86 ● display fr statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display fr statistics Purpose Use the display fr statistics command to view the current Frame Relay statistics about receiving and sending packets. Syntax display fr statistics [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. It can only be a main interface. Display the Frame Relay statistics about receiving and sending packets.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr map-info ● 87 display fr map-info Purpose Use the display fr map-info command to view all FR address maps or the one for the specified interface. Syntax display fr map-info [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. It can be a main interface or a sub-interface. Display frame relay address map table.
88 ● display fr map-info pppofr 3Com Router 5000 Family and Router 6000 Family Command Reference display fr map-info pppofr Purpose Use the display fr map-info pppofr command to display information about the current PPPoFR map and its state. Syntax display fr map-info pppofr Parameters None Example Display information about the current PPPoFR map and its state.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr pvc-group ● 89 display fr pvc-group Purpose Use the display fr pvc-group command to view status, name, backup, protection, and other information about the specified PVC group, PVC groups on a specified interface, or all PVC groups if no argument is specified. Syntax display fr pvc-group [ interface interface-type interface-number ] [ pvc-group-name ] Parameters interface-type Interface type.
90 ● display fr pvc-group 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Descriptions on the fields of the display fr pvc-group command View Field Description PVC group information for interface Serial1/0/0 (DCE, physical UP) The interface Serial1/0/0 functions as DCE and its physical layer is up. PVC-GROUP NAME: 123 The name of the PVC group is 123. Interface: Serial1/0/0 PVC group 123 is located on interface Serial1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference display fr pvc-infoc ● 91 display fr pvc-infoc Purpose Use the display fr pvc-info command to view the frame relay PVC table. This command displays the statistics about the frame relay PVC status and receiving/sending data on this PVC. Syntax display fr pvc-info [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface. It can be a main interface or a sub-interface.
92 ● display fr pvc-infoc Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference fr dlci
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ● 93 display interface Purpose Use the display interface command to view the LAPB or X.25 interface information. After configuring PVC of X.25, users can use the command to obtain the status information on one interface. Syntax display interface serial [ number ] Parameters number Example Encapsulate Serial0/0/0 with LAPB protocol and view the encapsulated interface information using the following commands.
94 ● display interface 3Com Router 5000 Family and Router 6000 Family Command Reference The following table describes the description on the fields of the display interface command. Table 1 Desrciption on the fields of the display interface command Field Description Link-protocol is X.25 DCE Ietf Current encapsulation protocol of this interface is X.25 protocol that works in DCE mode, and the data packet encapsulation format is IETF. address is X.121 address of this X.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface ● 95 Table 1 Desrciption on the fields of the display interface command (continued) View Field Description Invalid ns Error statistics of this interface LAPB, including total of received information frames carrying erroneous sequence numbers. Invalid nr Error statistics of this interface LAPB, including total of received information frames and monitoring frames carrying erroneous acknowledgment numbers.
96 ● display interface bri 3Com Router 5000 Family and Router 6000 Family Command Reference display interface bri Purpose Use the display interface bri command to view status about the specified ISDN BRI interface. Syntax display interface bri interface-type interface-number Parameters interface-type interface-number Example Specifies an interface by its type and number. Display status about ISDN BRI interface BRI 3/0/0:1.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface mfr ● 97 display interface mfr Purpose Use the display interface mfr command to view information on one or all MFR interfaces, including configuration, state, and packet statistics. Syntax display interface mfr [ interface-number [ .subnumber ] ] Parameters interface-number MFR interface number. subnumber MFR subinterface number.
98 ● display interface mfr 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display interface mfr command (continued) View Field Description 1058 packets input, 832389 bytes, 0 drops Packets and bytes received on the interface and packets dropped as the result of full receive buffer This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display isdn active-channel ● 99 display isdn active-channel Purpose Use the display isdn active-channel command to view the active call information on ISDN interfaces. Syntax display isdn active-channel [ interface type number ] Parameters interface type number Example Display the active call information on the interface bri 0/0/0. Interface type and number.
100 ● display isdn call-info 3Com Router 5000 Family and Router 6000 Family Command Reference display isdn call-info Purpose Use the display isdn call-info command to view the current states of ISDN interfaces. Syntax display isdn call-info [ interface type number ] Parameters interface type number Example Display the current state of ISDN interface 2/0/0. Interface type and number.
3Com Router 5000 Family and Router 6000 Family Command Reference display isdn call-info ● 101 Table 1 Description on the fields of the display isdn call-info command (continued) Field Description Network Layer: 1 connection(s) Only one network layer connection is present on the interface. CCIndex Index of the call at the CC layer State Current state of the layer 3 link of the BRI interface.
102 ● display isdn call-record 3Com Router 5000 Family and Router 6000 Family Command Reference display isdn call-record Purpose Use the display isdn call-record command to view the information of ISDN call history. Syntax display isdn call-record [ interface type number ] Parameters interface type number Example Display the information of ISDN call history. Displays only the call history of the specified interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display isdn parameters ● 103 display isdn parameters Purpose Use the display isdn parameters command to view the system parameters at layers 2 and 3 of the ISDN protocol, such as the durations of system timers and frame size. Syntax display isdn parameters { protocol | interface type number } Parameters protocol ISDN protocol type, which can be DSS1, NTT, NI, NI2, QSIG, ETSI, ANSI or AT&T.
104 ● display isdn parameters 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description of the fields of the display isdn parameters command (continued) View Item Description K(Pri) The maximum number of unacknowledged frames (slide window size) on the ISDN PRI port Timer-Number ISDN L3 timer Value(sec) Duration (in seconds) of each ISDN L3 timer This command can be used in the following views: ■ Any view Description If only ISDN protocol is specified, the system wi
3Com Router 5000 Family and Router 6000 Family Command Reference display isdn spid ● 105 display isdn spid Purpose Use the display isdn spid command to view information on SPID on the BRI interface encapsulated with the NI protocol. Syntax display isdn spid [ interface type number ] Parameters interface type number Example Display the related information of SPID on the NI-supported interface bri 0/0/0. Specifies interface type and number.
106 ● display isdn spid View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Any view You may execute this command to view the SPID type, SPID value and some other information when ISDN is running. Executing this command without specifying an interface, you may view information on SPI on all the SPID-supported BRI interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display mfr ● 107 display mfr Purpose Use the display mfr command to view configuration and statistics information of multilink frame relay bundle and bundle link. If no bundle or bundle link is specified, information of all bundles and bundle links will be displayed. Syntax display mfr [ interface interface-type interface-number | verbose ] Parameters interface-type Interface type. interface-number Interface number.
108 ● display mfr 3Com Router 5000 Family and Router 6000 Family Command Reference Add_link_rej(TX/RX): 0/0 Remove_link(TX/RX): 0/0 Pkts dropped(in/out): 0/0 Timer: ACK 4, Hello 10 Retry: Max 2, Current 0 Cause code: nonew Remove_link_ack(TX/RX): 0/0 Table 1 Description on the fields of the display mfr command Field Description Bundle interface –– Bundle state Operating state of the bundle interface.
3Com Router 5000 Family and Router 6000 Family Command Reference View Related Commands This command can be used in the following views: ■ Any view ■ link-protocol fr mfr ■ interface mfr display mfr ● 109
110 ● display ppp compression iphc rtp 3Com Router 5000 Family and Router 6000 Family Command Reference display ppp compression iphc rtp Purpose Use the display ppp compression iphc rtp command to view the statistic information of the RTP header compression. Syntax display ppp compression iphc rtp [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display statistics about RTP header compression.
3Com Router 5000 Family and Router 6000 Family Command Reference display ppp compression iphc tcp ● 111 display ppp compression iphc tcp Purpose Use the display ppp compression iphc tcp command to view the statistic information of the TCP header compression. Syntax display ppp compression iphc tcp [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display statistics about TCP header compression.
112 ● display ppp compression stac-lzs 3Com Router 5000 Family and Router 6000 Family Command Reference display ppp compression stac-lzs Purpose Use the display ppp compression stac-lzs command to view information about STAC-LZS compression. Syntax display ppp compression stac-lzs [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display information about STAC-LZS compression.
3Com Router 5000 Family and Router 6000 Family Command Reference display ppp mp ● 113 display ppp mp Purpose Use the display ppp mp command to view all interface information and statistics of MP. Syntax display ppp mp [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies the interface to be checked. Display information about MP interfaces, which are configured using virtual templates.
114 ● display ppp mp 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display ppp mp command (continued) Field Description sequence 0/0 rcvd/sent Received sequence number/sent sequence number The member channels bundled are: The following displays all the member channels bundled on this logical channel Serial1/0/0 Up-Time:2005/03/13 15:04:08:870 Subchannel Serial1/0/0 is up at 15:04:08:870 on March 13, 2005 Display information about MP inter
3Com Router 5000 Family and Router 6000 Family Command Reference display pppoe-server session ● 115 display pppoe-server session Purpose Use the display pppoe-server session command to view the status and statistics of PPPoE session. Syntax display pppoe-server session { all | packet | statistics interface interface-type interface-number } Parameters all Displays all information about each PPPoE session. packet Displays statistics about the packets on each PPPoE session.
116 ● display pppoe-server session 3Com Router 5000 Family and Router 6000 Family Command Reference Table 2 Description of the output (continued) View Related Commands Field Description OutO Out Octets, Bytes sent OutD Out Discard, Discarded packages that might be sent.
3Com Router 5000 Family and Router 6000 Family Command Reference display pppoe-server session ● 117 display pppoe-server session Purpose The command display pppoe-client session is used to display the status and statistics of PPPoE session. Syntax display pppoe-client session { summary | packet } [ dial-bundle-number number ] Parameters summary Displays the summary of PPPoE session. packet Displays the statistics of PPPoE session data packet.
118 ● display pppoe-server session 3Com Router 5000 Family and Router 6000 Family Command Reference For more details of the display information, see the following table.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 alias-policy ● 119 display x25 alias-policy Purpose Use the display x25 alias-policy command to view X.25 alias table. Syntax display x25 alias-policy [ interface interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display X.25 alias table.
120 ● display x25 cug 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 cug Purpose Use the display x25 cug command to view the CUG configuration on the router ports. Syntax display x25 cug Parameters None Example Display the CUG configuration on the router ports.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 hunt-group-info ● 121 display x25 hunt-group-info Purpose Use the display x25 hunt-group-info command to view the status information of X.25 hunt group. Syntax display x25 hunt-group-info [ hunt-group-name ] Parameters hunt-group-name Example Display the status information of X.25 hunt group hg1. Hunt group name.
122 ● display x25 map 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 map Purpose Use the display x25 map command to view the X.25 address mapping table. Syntax display x25 map View This command can be used in the following views: ■ Any view Parameters None Example Display the X.25 address map table. <3Com> display x25 map Interface:Serial3/0/0(protocol status is up): ip address:202.38.162.2 X.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 pad ● 123 display x25 pad Purpose Use the display x25 pad command to view X.25 PAD connection information. Syntax display x25 pad [ pad-id ] Parameters pad-id Example Display X.25 PAD connection information. PAD ID. Valid values are 0 to 255. If it is not specified, all PAD connection information will be displayed. [3Com] display x25 pad UI-INDEX130: From remote 22 connected to local 11, State: Normal X.
124 ● display x25 switch-table pvc 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 switch-table pvc Purpose Use the display x25 switch-table pvc command to view X.25 switching virtual circuit table. Syntax display x25 switch-table pvc Parameters None Example Display X.25 switching virtual circuit table.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 switch-table svc ● 125 display x25 switch-table svc Purpose The command display x25 switch-table svc is used to display X.25 switching routing table. Syntax display x25 switch-table svc { dynamic | static } Parameters None Example Display X.25 switching routing table. [3Com] display x25 switch-table svc static Number Destination Substitute- Substitute- CUD src dst 1 11 2 22 3 133 4 132 5 133 T/124.124.124.124 T/125.125.
126 ● display x25 vc 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 vc Purpose Use the display x25 vc command to view the information about the X.25 virtual circuit. Syntax display x25 vc [ lci ] Parameters lci Example Display X.25 virtual circuit. Logical channel identifier. Valid values are 1 to 4095. If the logical channel identifier is not specified, all virtual circuits will be displayed. <3Com> display x25 vc Interface: Serial2/0/0 SVC 1 State: P4 Map: ip 10.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 vc ● 127 Interface: Serial2/0 PVC 1 State: D3 PVC <--> XOT Serial2/0/0-1.1.1.
128 ● display x25 x2t switch-table 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 x2t switch-table Purpose Use the display x25 x2t switch-table command to display the dynamic switching routing table and static routing table. Syntax display x25 x2t switch-table Parameters None Example Display the X2T dynamic switching routing table on the router. [Router] display x25 x2t switch-table ■ X.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 xot ● 129 display x25 xot Purpose Use the display x25 xot command to view XOT link information. Syntax display x25 xot Parameters None Example Display XOT link information. [3Com] display x25 xot SVC 1024: ( ESTAB ) tcp peer ip: 10.1.1.1, peer port: 1998 tcp local ip: 10.1.1.2, local port: 1024 socket keepalive period: 5, keepalive tries: 3 come interface name: Serial0/0/0-10.1.1.
130 ● dlsw ethernet-frame-filter 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw ethernet-frame-filter Purpose Use the dlsw ethernet-frame-filter command to apply an ACL in the transmitting and receiving directions of DLSW module towards bridge module so that it can transmit and receive only the Ethernet frames with permitted source MAC addresses. Use the undo dlsw ethernet-frame-filter command to delete the MAC-address-based ACL applied in the transmitting or receiving direction.
3Com Router 5000 Family and Router 6000 Family Command Reference enable deactivate ● 131 enable deactivate Purpose Use the enable deactivate command to enable the router to actively deactivate the BSV interface. Use the undo enable deactivate command to disable the router to actively deactivate the BSV interface. Syntax enable deactivate undo enable deactivate Parameters None Default By default, the router is enabled to actively deactivate the BSV interface.
132 ● encapsulation 3Com Router 5000 Family and Router 6000 Family Command Reference encapsulation Purpose Use the encapsulation command to specify ATM AAL5 encapsulation type for PVC. Use the undo encapsulation command to restore the default encapsulation.
3Com Router 5000 Family and Router 6000 Family Command Reference encapsulation ● 133 Table 1 Support of ATM PVC encapsulation to carried protocols EoA (IPoEoA/ Encapsulation PPPoEoA) PPPoA InARP Multiprotocol support IPoA aal5snap Yes Yes Yes Yes Yes aal5mux Yes Yes Yes No No aal5nlpid Yes No No No Yes
134 ● firewall ethernet-frame-filter 3Com Router 5000 Family and Router 6000 Family Command Reference firewall ethernet-frame-filter Purpose Use the firewall ethernet-frame-filter command to apply a MAC-based ACL on the interface. Use the undo firewall ethernet-frame-filter command to remove the MAC-based ACL from the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference fr bump ● 135 fr bump Purpose Use the fr bump command to configure the standby PVC that will take over when a specified PVC goes down. Use the undo fr bump command to remove the backup configuration. Syntax fr bump dlci grade undo fr bump dlci Parameters dlci DLCI number of the PVC to be backed up. Valid values are 16 to 1007.
136 ● fr compression iphc 3Com Router 5000 Family and Router 6000 Family Command Reference fr compression iphc Purpose Use the fr compression iphc command to enable the IP header compression. Use the undo fr compression iphc command to disable the function. Syntax fr compression iphc undo fr compression iphc Parameters None Default By default, the Frame Relay compression function is disabled. Example Configure the Frame Relay interface Serial 4/1/0 to adopt IP header compression.
3Com Router 5000 Family and Router 6000 Family Command Reference fr compression frf9 ● 137 fr compression frf9 Purpose Use the fr compression frf9 command to enable the FRF9 compression function. Use the fr compression frf9 command to disable the FRF9 compression function. Syntax fr compression frf9 undo fr compression Parameters interface-type interface-number Specifies an interface. Default By default, the frame relay function is disabled.
138 ● fr dlci 3Com Router 5000 Family and Router 6000 Family Command Reference fr dlci Purpose Use the fr dlci command to configure the virtual circuit for Frame Relay interface. Use the undo fr dlci command to cancel the configuration. Syntax fr dlci dlci undo fr dlci dlci Parameters dlci Example Assign a virtual circuit with DLCI 100 to Frame Relay sub-interface Serial1/0/0.1. Virtual circuit number allocated for Frame Relay interface. Valid values are 16 to 1007.
3Com Router 5000 Family and Router 6000 Family Command Reference fr dlci-switch ● 139 fr dlci-switch Purpose Use the fr dlci-switch command to configure a static route for frame relay PVC switching. Use the undo fr dlci-switch command to delete a static route for frame relay PVC switching. Syntax fr dlci-switch in-dlci interface interface-type interface-number dlci out-dlci undo fr dlci-switch in-dlci Parameters Default in-dlci DLCI in the packets received on the interface.
140 ● fr inarp 3Com Router 5000 Family and Router 6000 Family Command Reference fr inarp Purpose Use the fr inarp command to enable the inverse address resolution of Frame Relay. Use the undo fr inarp command to disable this function. Syntax fr inarp [ ip [ dlci ] | ipx [ dlci ] ] undo fr inarp [ ip [ dlci ] | ipx [ dlci ] ] Parameters ip Performs inverse address resolution for IP addresses. ipx Performs inverse address resolution for IPX addresses.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ display fr map-info ■ fr map ■ reset fr inarp fr inarp ● 141
142 ● fr interface-type 3Com Router 5000 Family and Router 6000 Family Command Reference fr interface-type Purpose Use the fr interface-type command to set the Frame Relay interface type. Use the undo fr interface-type command to restore the default Frame Relay interface type. Syntax fr interface-type { dce | dte | nni } undo fr interface-type Parameters dte, dce and nni Default By default, the frame relay interface type is DTE Example Set the type of the Frame Relay interface Serial1/0/0 to DCE.
3Com Router 5000 Family and Router 6000 Family Command Reference fr ip-dscp ● 143 fr ip-dscp Purpose Use the fr ip-dscp command to configure the PVC to carry packets of the specified priority levels when the DSCP identifier in the IP packet is used to identify the priority levels of packets. Use the undo fr ip-dscp command to remove the configuration. Syntax fr ip-dscp dlci { min [ max ] | default } undo fr ip-dscp dlci Parameters Example dlci DLCI number of the PVC. Valid values are 16 to 1007.
144 ● fr ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference fr ip-precedence Purpose Use the fr ip-precedence command to configure the PVC to carry packets of the specified priority levels when the Precedence identifier in the IP packet is used to identify the priority levels of packets. Use the undo fr ip-precedence command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference fr iphc ● 145 fr iphc Purpose Use the fr iphc command to enable IP header compression function, including RTP/TCP header compression. Use the undo fr iphc command to disable this function.
146 ● fr lmi n391dte 3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi n391dte Purpose Use the fr lmi n391dte command to configure N391 parameter at the DTE side. Use the undo fr lmi n391dte command to restore the default value. Syntax fr lmi n391dte n391-value undo fr lmi n391dte Parameters n391-value Default By default, its value is 6. Example Set DTE as the operating mode of Frame Relay interface Serial1/0/0, and the counter value of the PVC status to 10.
3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi n392dce ● 147 fr lmi n392dce Purpose Use the fr lmi n392dce command to set N392 parameter at the DCE side. Use the undo fr lmi n392dce command to restore the default configuration. Syntax fr lmi n392dce n392-value undo fr lmi n392dce Parameters n392-value Default By default, the parameter value is 3. Example Set the operation of frame relay interface Serial1/0/0 as DCE mode and sets N392 to 5 and N393 to 6. Error threshold.
148 ● fr lmi n392dte 3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi n392dte Purpose Use the fr lmi n392dte command to set N392 parameter at the DTE side. Use the undo fr lmi n392dte command to restore the default configuration. Syntax fr lmi n392dte n392-value undo fr lmi n392dte Parameters n392-value Default By default, the parameter is 3. Example Set the operation of frame relay interface Serial1/0/0 as the DTE mode and sets N392 to 5 and N393 to 6.
3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi n393dce ● 149 fr lmi n393dce Purpose Use the fr lmi n393dce command to set the N393 parameter at the DCE side. Use the undo fr lmi n393dce command to restore the default configuration. Syntax fr lmi n393dce n393-value undo fr lmi n393dce Parameters n393-value Example Set the operation of frame relay interface Serial1/0/0 as DCE mode and sets N392 to 5 and N393 to 6. Event counter. Valid values are 1 to 10.
150 ● fr lmi n393dte 3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi n393dte Purpose Use the fr lmi n393dte command to set N393 parameter at the DTE side. Use the undo fr lmi n393dte command to restore the default configuration. SyntaxSyntax fr lmi n393dte n393-value undo fr lmi n393dte Parameters Event counter. In the range 1 to 10. Default By default, the parameter value is 4.
3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi t392dce ● 151 fr lmi t392dce Purpose Use the fr lmi t392dce command to set T392 parameter at the DCE side. Use the undo fr lmi t392dce command to restore the default configuration. Syntax fr lmi t392dce t392-value undo fr lmi t392dce Parameters t392-value Default By default, the parameter value is 15s. Example Set the Frame Relay interface Serial1/0/0 to operate in DCE mode and set T392 to 10s.
152 ● fr lmi type 3Com Router 5000 Family and Router 6000 Family Command Reference fr lmi type Purpose Use the fr lmi type command to configure the Frame Relay LMI protocol type. Use the undo fr lmi type command to restore to the default value of LMI protocol type. Syntax fr lmi type { ansi | nonstandard | q933a } undo fr lmi type Parameters ansi Standard LMI protocol type of ANSI T1.617 Appendix D. nonstandard Nonstandard compatible LMI protocol type. q933a Standard LMI protocol type of Q.
3Com Router 5000 Family and Router 6000 Family Command Reference fr map bridge ● 153 fr map bridge Purpose Use the fr map bridge command to add a bridge-set to frame relay map entry. Use the undo fr map bridge command to delete a bridge-set to frame relay map entry. Syntax fr map bridge dlci broadcast undo fr map bridge dlci Parameters dlci Local VC number. Valid values are 16 to 1007. broadcast Specifies the broadcast attribute of the map.
154 ● fr map ip 3Com Router 5000 Family and Router 6000 Family Command Reference fr map ip Purpose Use the fr map ip command to add an IP address map entry for FR. Use the undo fr map ip command to remove an IP address map entry for FR.
3Com Router 5000 Family and Router 6000 Family Command Reference fr map ip ● 155 Interface Serial 1/0/0 is connected to a router with IP address 10.1.1.1. Map PVC group 123 to this remote IP address for data forwarding. [3Com-Serial1/0/0] fr map ip 10.1.1.1 pvc-group 123 View This command can be used in the following views: ■ Description Interface view You may map an IP address to a PVC by specifying DLCI, or to a PVC group by specifying PVC group name.
156 ● fr map ipx 3Com Router 5000 Family and Router 6000 Family Command Reference fr map ipx Purpose Use the fr map ipx command to add an IPX address map entry. Use the undo fr map ipx command to remove an IPX address map entry of FR. Syntax fr map ipx protocol-address dlci [ broadcast ] [ nonstandard | ietf ] [ compression frf9 ] undo fr map ipx protocol-address dlci Parameters protocol-address IPX address of the remote host. dlci Local virtual circuit number. Valid values are 16 to 1007.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ display fr map ■ fr inarp fr map ipx ● 157
158 ● fr map ppp interface virtual-template 3Com Router 5000 Family and Router 6000 Family Command Reference fr map ppp interface virtual-template Purpose Use the fr map ppp interface virtual-template command to map the FR DLCI (corresponds to an FR PVC) to a PPP link, so the PPPoFR link is established, and thus PPP packets can be sent/received on FR PVC. Use the undo map ppp command to cancel this map, and thus eliminates this PPPoFR link.
3Com Router 5000 Family and Router 6000 Family Command Reference fr match ● 159 fr match Purpose Use the fr match command to configure a PVC group to differentiate traffic by the Precedence or DSCP identifier in the TOS field of the IP header. Use the undo fr match command to remove the configuration. Syntax fr match {dscp | precedence } undo fr match Parameters dscp Specifies to differentiate IP packets by the 6-bit DSCP identifier in the TOS field of the IP header.
160 ● fr mpls-exp 3Com Router 5000 Family and Router 6000 Family Command Reference fr mpls-exp Purpose Use the fr mpls-exp command to configure the PVC to carry packets of the specified priority levels when the EXP identifier in the MPLS packet is used to identify the priority levels of packets. Use the undo fr mpls-exp command to remove the configuration. Syntax fr mpls-exp dlci { min [ max ] | default } undo fr mpls-exp dlci Parameters dlci DLCI number of the PVC. Valid values are 16 to 1007.
3Com Router 5000 Family and Router 6000 Family Command Reference fr pvc-group ● 161 fr pvc-group Purpose Use the fr pvc-group command to create a PVC group. Use the undo fr pvc-group command to remove a PVC group. Syntax fr pvc-group pvc-group-name undo fr pvc-group pvc-group-name Parameters pvc-group-name Default By default, no PVC group is configured. Example Create a PVC group named 123. Name for the PVC group, comprised of a string from 1 to 16 characters long.
162 ● fr pvc-protect 3Com Router 5000 Family and Router 6000 Family Command Reference fr pvc-protect Purpose Use the fr pvc-protect command to configure the protection mode for a PVC in a PVC group. Use the undo fr pvc-protect command to remove protection of a PVC group member. Syntax fr pvc-protect dlci { group | individual } undo fr pvc-protect dlci Parameters dlci DLCI number of the PVC to be protected. Valid values are 17 to 1006. group Specifies to use group protection mode.
3Com Router 5000 Family and Router 6000 Family Command Reference fr pvc-protect ● 163 Note that: ■ With a PVC in a PVC group configured to be protected in individual mode, the whole PVC group becomes unavailable when the PVC goes down. Even if the PVC is configured with a standby PVC, the standby PVC does not take over.
164 ● fr switch 3Com Router 5000 Family and Router 6000 Family Command Reference fr switch Purpose Use the fr switch command to create a PVC used for frame relay switching and enter frame relay switching view. Use the undo fr switch command to delete a specified PVC.
3Com Router 5000 Family and Router 6000 Family Command Reference fr switching ● 165 fr switching Purpose Use the fr switching command to enable frame relay PVC switching. Use the undo fr switching command to disable frame relay PVC switching. Syntax fr switching undo fr switching Parameters None Default By default, no FR switching is enabled. Example Enable PVC switching on FR interface.
166 ● interface bridge-template 3Com Router 5000 Family and Router 6000 Family Command Reference interface bridge-template Purpose Use the interface bridge-template command to create a bridge template interface, connecting the specified bridge set to the routing network. Use the undo interface bridge-template command to delete the bridge template interface.
3Com Router 5000 Family and Router 6000 Family Command Reference interface mfr ● 167 interface mfr Purpose Use the interface mfr command to create a multilink frame relay bundle interface or sub-interface and enter the corresponding interface view. Use the undo interface mfr command to delete a specified multilink frame relay bundle interface or sub-interface. Syntax interface mfr interface-number [ .subnumber ] undo interface mfr interface-number [ .
168 ● interface serial [ p2p | p2mp ] 3Com Router 5000 Family and Router 6000 Family Command Reference interface serial [ p2p | p2mp ] Purpose Use the interface serial [ p2p | p2mp ] command to configure type of the specified FR subinterface and enter frame relay subinterface view. Use the undo interface serial [ p2p | p2mp ] command to restore the default frame relay subinterface type. Syntax interface serial interface-number.subinterface-number [ p2p | p2mp ] undo interface serial interface-number.
3Com Router 5000 Family and Router 6000 Family Command Reference ip-dscp ● 169 ip-dscp Purpose Use the ip-dscp command to configure the PVC to carry packets of the specified priority levels when the DSCP identifier in the IP packet is used to identify the priority levels of packets. Use the undo ip-dscp command to remove the configuration.
170 ● ip-dscp Description Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference Note that: ■ If you do not configure the ip-dscp command, IP packets of all priorities are carried by the fundamental PVC of the PVC group, that is, the PVC used to construct the PVC group.
3Com Router 5000 Family and Router 6000 Family Command Reference ip-precedence ● 171 ip-precedence Purpose Use the ip-precedence command to set the precedence of IP packets carried over PVC. Use the undo ip-precedence command to delete the precedence configuration of IP packets carried over PVC.
172 ● ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference ■ The IP packets carrying certain priorities are transmitted over the PVCs specified for them using the ip-precedence { pvc-name [ vpi/vci ] | vpi/vci } min [ max ] command. If no PVC is specified for the IP packets with certain priorities, they are transmitted over the PVC specified using the ip-precedence { pvc-name [ vpi/vci ] | vpi/vci } default command if there is any.
3Com Router 5000 Family and Router 6000 Family Command Reference ip tcp vjcompress ● 173 ip tcp vjcompress Purpose Use the ip tcp vjcompress command to enable a PPP interface to compress the VJ TCP header. Use the undo ip tcp vjcompress command to disable the PPP interface to compress the VJ TCP header. Syntax ip tcp vjcompress undo ip tcp vjcompress Parameters None Default By default, the VJ TCP header is disabled to compress at the PPP interface.
174 ● isdn bch-local-manage 3Com Router 5000 Family and Router 6000 Family Command Reference isdn bch-local-manage Purpose Use the isdn bch-local-manage command to enable local ISDN B channel management. Use the undo isdn bch-local-manage command to disable the setting. Syntax isdn bch-local-manage [ exclusive ] undo isdn bch-local-manage Parameters exclusive Example Enable local ISDN B channel management. Exclusive local management mode for ISDN B channels.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn bch-select-way ● 175 isdn bch-select-way Purpose Use the isdn bch-select-way command to set a B channel selection method. Syntax isdn bch-select-way { ascending | descending } Parameters ascending Selects B channels in ascending order. descending Selects B channels in descending order. Example Configure B channel selection method on the interface Bri2/0/0 to descending order.
176 ● isdn caller-number 3Com Router 5000 Family and Router 6000 Family Command Reference isdn caller-number Purpose Use the isdn caller-number command to configure the range of the numbers that the router can receive. Use the undo isdn caller-number command to delete the configured caller number. Syntax isdn caller-number caller-number undo isdn caller-number Parameters caller-number Example Configure the router to receive only the incoming calls from the caller numbers with 400.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn calling ● 177 isdn calling Use the isdn calling command to have the messages from a calling party to a called party carry the calling number. Use the undo isdn calling command to delete calling number in the messages that a calling party transmitted.
178 ● isdn check-called-number 3Com Router 5000 Family and Router 6000 Family Command Reference isdn check-called-number Purpose Use the isdn check-called-number command to configure the called number or subaddress that the system should verify when receiving a digital call. Use the undo isdn check-called-number command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn crlength ● 179 isdn crlength Purpose Use the isdn crlength command to set length of the call reference used when a call is placed on an ISDN interface. Use the undo isdn crlength command to restore the default ISDN call reference length on the interface.
180 ● isdn ie passthrough 3Com Router 5000 Family and Router 6000 Family Command Reference isdn ie passthrough Purpose Use the isdn ie passthrough command to enable transparent transmission of certain or all related information element and you can use this command to configure transparent transmission direction. Use the undo isdn ie passthrough command to disable transparent transmission for Q.931 related information element.
3Com Router 5000 Family and Router 6000 Family Command Reference Example isdn ie passthrough ● 181 Set to enable transparent transmission for facility on both direction on Serial 0/0/0:15. <3Com> system-view [3Com] interface serial 0/0/0:15 [3Com-Serial0/0/0:15] isdn ie passthrough facility both View This command can be used in the following views: ■ Description ISDN interface view (not applicable on BRI interface) This command is only valid when ISDN initiates or receives an H.
182 ● isdn ignore connect-ack 3Com Router 5000 Family and Router 6000 Family Command Reference isdn ignore connect-ack Purpose Use the isdn ignore connect-ack command to configure the router to switch the ISDN protocol state to ACTIVE to start the data and voice service communications after sending a CONNECT message without having to wait for a CONNECT ACK message. Use the undo isdn ignore connect-ack command to restore the default setting.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn ignore hlc ● 183 isdn ignore hlc Purpose Use the isdn ignore hlc command to disable ISDN to carry the higher layer compatibility (HLC) information element in the SETUP messages sent when placing voice calls. Use the undo isdn ignore hlc command to configure ISDN to carry the HLC information element in SETUP messages.
184 ● isdn ignore llc 3Com Router 5000 Family and Router 6000 Family Command Reference isdn ignore llc Purpose Use the isdn ignore llc command to disable ISDN to carry the Lower Layer Compatibility (LLC) information element in the SETUP messages sent when placing voice calls. Use the undo isdn ignore llc command to configure ISDN to carry the LLC information element in SETUP messages.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn ignore sending-complete ● 185 isdn ignore sending-complete Purpose Use the isdn ignore sending-complete command to configure the ISDN protocol to ignore the processing on the Sending Complete Information Element. Use the undo isdn ignore sending-complete command to restore the default setting.
186 ● isdn L3-timer 3Com Router 5000 Family and Router 6000 Family Command Reference isdn L3-timer Purpose Use the isdn L3-timer command to configure the duration of an ISDN L3 timer. Use the undo isdn L3-timer command to restore the default duration of the ISDN L3 timer on the interface. Syntax isdn L3-timer timer-name time-interval undo isdn L3-timer { timer-name | all } Parameters timer-name Name of a L3 timer of the ISDN protocol.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn number-property ● 187 isdn number-property Purpose Use the isdn number-property command to set the type and code scheme of calling or called numbers in incoming or outgoing ISDN calls. Use the undo isdn number-property command to restore the default.
188 ● isdn number-property 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Types and code schemes of ISDN numbers (continued) Protocol Field (Bit) value Types 8 ETSI NI NTT QSIG 7 6 Definition Code schemes 5 4 3 1 1 0 0 0 1 ISDN/telephony numbering plan( Recommendation E.164) 0 0 1 1 Data numbering plan( Recommendation X.121) 0 1 0 0 Telex numbering plan( Recommendation F.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn number-property ● 189 Table 1 Types and code schemes of ISDN numbers (continued) Protocol Field (Bit) value Types 8 Definition Code schemes 7 6 5 4 3 1 1 0 0 0 0 0 0 1 Unknown number in ISDN/Telephony numbering plan (ITU-T Rec.E.164/E.163) 0 0 1 0 0 0 1 International number in ISDN/Telephony numbering plan (ITU-T Rec.E.164/E.163) 0 1 0 0 0 0 1 National number in ISDN/Telephony numbering plan (ITU-T Rec.
190 ● isdn number-property Description 3Com Router 5000 Family and Router 6000 Family Command Reference If the isdn number-property command is configured, the system adopts the configured ISDN number type and code scheme without considering the upper layer service. The following table shows how to set number type and code scheme.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn overlap-sending ● 191 isdn overlap-sending Purpose Use the isdn overlap-sending command to set the system to send the called number information in the overlap mode on the ISDN interface. Use the undo isdn overlap-sending command to set the system to send the called information in full mode. Syntax isdn overlap-sending [ digits ] undo isdn overlap-sending Parameters digits Default By default, full-sending mode applies.
192 ● isdn pri-slipwnd-size 3Com Router 5000 Family and Router 6000 Family Command Reference isdn pri-slipwnd-size Purpose Use the isdn pri-slipwnd-size command to set the slide window size on a PRI interface. Use the isdn pri-slipwnd-size default command to restore the default slide window size on the PRI interface. Syntax isdn pri-slipwnd-size window-size isdn pri-slipwnd-size default Parameters window-size Example Configure the slide window size on the interface e1 0/0/0 to 10.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn protocol-mode ● 193 isdn protocol-mode Purpose Use the isdn protocol-mode command to set the ISDN interface to operate on the user side or network side of ISDN protocol. Syntax isdn protocol-mode mode undo isdn protocol-mode Parameters mode Default By default, both ISDN BRI and ISDN PRI interfaces are operating on the user-side of ISDN protocol. Among BRI interfaces, only BSV interfaces support network-side BRI.
194 ● isdn protocol-type 3Com Router 5000 Family and Router 6000 Family Command Reference isdn protocol-type Purpose Use the isdn protocol-type command to set the ISDN protocol to be run on an ISDN interface. Syntax isdn protocol-type protocol Parameters protocol Default By default, both BRI and PRI interfaces run the ISDN protocol DSS1. Example Apply ISDN ETSI on interface Bri0/0/0. ISDN protocol, which can be DSS1, NTT, NI, QSIG, ETSI, ANSI, or AT&T.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn protocol-type ● 195 executing the undo shutdown command. The operations, however, will lead to the disconnection of the call existing on the interface.
196 ● isdn q921-permanent 3Com Router 5000 Family and Router 6000 Family Command Reference isdn q921-permanent Purpose Use the isdn q921-permanent command to enable the Q.921 permanent link function. Use the undo isdn q921-permanent command to disable the Q.921 permanent link function. Syntax isdn q921-permanent undo isdn q921-permanent Parameters None Default By default, the Q.921 permanent link function is disabled. Example Enable the Q.921 permanent link function on interface BRI 2/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn send-restart ● 197 isdn send-restart Purpose Use the isdn send-restart command to enable PRI interfaces to actively send ISDN RESTART messages to clear calls of the remote end before maintaining B channels. Use the undo isdn send-restart command to disable PRI interfaces to actively send ISDN RESTART messages.
198 ● isdn spid auto_trigger 3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid auto_trigger Purpose Use the isdn spid auto_trigger command to enable SPID auto-negotiation once on the BRI interface running the NI protocol. Syntax isdn spid auto_trigger Parameters None Default By default, a BRI interface does not originate a SPID negotiation request unless triggered by a call. Example Manually trigger a new SPID negotiation request on the interface bri0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid nit ● 199 isdn spid nit Purpose Use the isdn spid nit command to set the SPID processing mode to NIT (Not Initial Terminal) on an NI-compliant BRI interface. Use the undo isdn spid nit command to disable the NIT mode on the BRI interface. Syntax isdn spid nit undo isdn spid nit Parameters None Default By default, NIT mode does not apply on BRI interfaces. Instead, static SPID or dynamic SPID negotiation is applied.
200 ● isdn spid resend 3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid resend Purpose Use the isdn spid resend command to set the number of INFORMATION message retransmission attempts for SPID negotiation or initialization on an NI-compliant BRI interface. Use the undo isdn spid resend command to restore the default number of INFORMATION message retransmission attempts on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid service ● 201 isdn spid service Purpose Use the isdn spid service command to configure the service types that must be supported in SPI negotiation on the BRI interface adopting NI protocol. Use the undo isdn spid service command to delete he service types that must be supported in SPI negotiation on the BRI interface adopting NI protocol.
202 ● isdn spid timer 3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid timer Purpose Use the isdn spid timer command to set the duration of the timer TSPID for an NI-compliant BRI interface to timer_length. Use the undo isdn spid timer command to restore the default duration of the timer TSPID for the NI-compliant BRI interface. Syntax isdn spid timer seconds undo isdn spid timer Parameters seconds Example Set the duration of TSPID on the interface bri0/0/0 to 50 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid1 ● 203 isdn spid1 Purpose Use the isdn spid1 command to configure SPID information for the B1 channel on the NI-compliant BRI interface. Use the undo isdn spid1 command to remove the SPID information of the B1 channel on the interface. Syntax isdn spid1 spid [ LDN ] undo isdn spid1 Parameters spid A string from 1 to 20 digits long. LDN Local dialing number, consisting of a string from 1 to 30 digits long.
204 ● isdn spid2 3Com Router 5000 Family and Router 6000 Family Command Reference isdn spid2 Purpose Use the isdn spid2 command to configure SPID information for the B1 channel on an NI-compliant BRI interface. Use the undo isdn spid2 command to remove the SPID information of the B1 channel on the interface. Syntax isdn spid2 spid [ LDN ] undo isdn spid2 Parameters spid A string from 1 to 20 digits long. LDN Local dialing number, consisting of a string from 1 to 30 digits long.
3Com Router 5000 Family and Router 6000 Family Command Reference isdn statistics ● 205 isdn statistics Purpose Use the isdn statistics command to have the system make statistics on the information received and transmitted at an ISDN interface. Use the isdn statistics start command in the view of an interface to start making statistics on the messages received and transmitted at the interface. Use the isdn statistics display command to view the statistic information.
206 ● isdn statistics 3Com Router 5000 Family and Router 6000 Family Command Reference CONNECT_ACK DISCONNECT RELEASE RELEASE_COM View Send(5) Send(3) Send(1) Send(18) Recv(13) Recv(16) Recv(18) Recv(1) This command can be used in the following views: ■ ISDN Interface view
3Com Router 5000 Family and Router 6000 Family Command Reference isdn two-tei ● 207 isdn two-tei Purpose Use the isdn two-tei command to have the router requests the connected switch for a new TEI value before calling for a B channel. Use the undo isdn two-tei command to restore the default TEI handling practice on the BRI interface. Syntax isdn two-tei undo isdn two-tei Parameters None Default By default, all the B channels on the BRI interface use one TEI value.
208 ● lapb retry 3Com Router 5000 Family and Router 6000 Family Command Reference lapb retry Purpose Use the lapb retry command to configure LAPB parameter N2. Use the undo lapb retry command to restore the default value. Syntax lapb retry n2-value undo lapb retry Parameters n2-value Example Set the LAPB parameter N2 on Serial0/0/0 to 20. The value of N2. Valid values are 1 to 255. If no value is specified, the default parameter N2 of LAPB is 10.
3Com Router 5000 Family and Router 6000 Family Command Reference lapb window-size ● 209 lapb window-size Purpose Use the lapb window-size command to configure the LAPB window parameter K. Use the undo lapb window-size command to restore the default value of the LAPB window parameter K. Syntax lapb window-size k-value undo lapb window-size Parameters k-value Example Set the LAPB window parameter K on the interface Serial 0/0/0 to be 5.
210 ● lapd modulo 3Com Router 5000 Family and Router 6000 Family Command Reference lapd modulo Purpose Use the lapb modulo command to specify the LAPB frame numbering view (also called modulo). Use the undo lapb modulo command to restore the default value. Syntax lapb modulo { 128 | 8 } undo lapb modulo Parameters 12 Using modulus 128 numbering view. 8 Using modulus 8 numbering view. Default By default, the LAPB frame protocol view is modulo 8.
3Com Router 5000 Family and Router 6000 Family Command Reference lapd timer ● 211 lapd timer Purpose Use the lapb timer command to configure the LAPB timers T1, T2 and T3. Use the undo lapb timer command to restore their default values. Syntax lapb timer { t1 t1-value | t2 t1-value | t3 t3-value } undo lapb timer { t1 | t2 | t3 } Parameters Example t1-value The value of timer T1 (in milliseconds). Valid values are 1 to 64000. If no value is specified, the default is 3000 milliseconds.
212 ● link-protocol fr 3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol fr Purpose Use the link-protocol fr command to encapsulate interface link layer protocol as Frame Relay. Syntax link-protocol fr [ nonstandard | ietf ] Parameters nonstandard Nonstandard compatible encapsulation format. ietf Default encapsulation format according to the Internet Engineering Task Force (IETF) standard.
3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol fr mfr ● 213 link-protocol fr mfr Purpose Use the link-protocol fr mfr command to configure the current physical interface as an MFR bundle link and bundle it onto a specified MFR interface. Syntax link-protocol fr mfr interface-number Parameters interface-number Default By default, there is no MFR bundle link.
214 ● link-protocol hdlc 3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol hdlc Purpose Use the link-protocol hdlc command to configure the interface encapsulation as HDLC. Syntax link-protocol hdlc Parameters None Default By default, the interface is encapsulated with PPP. Example Configure HDLC encapsulation on interface Serial1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol lapb ● 215 link-protocol lapb Purpose Use the link-protocol lapb command to specify the link layer protocol of the interface as LAPB. Syntax link-protocol lapb [ dte | dce ] [ ip | multi-protocol ] Parameters dte Indicates that the interface works in DTE mode of LAPB. dce Indicates that the interface works in DCE mode of LAPB. ip Indicates that the network layer protocol borne by LAPB is IP.
216 ● link-protocol ppp 3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol ppp Purpose Use the link-protocol ppp command to configure the link-layer protocol encapsulated on the interface as PPP. Syntax link-protocol ppp Parameters None Default By default, the link-layer protocol for interface encapsulation is PPP. Example Configure PPP encapsulation on interface Serial 0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol slip ● 217 link-protocol slip Purpose Use the link-protocol slip command to set the link layer protocol of the interface as SLIP. Syntax link-protocol slip Parameters None Default By default, the link-layer protocol for interface is PPP. Example Configure the link layer protocol on the interface Serial0/0/0 as SLIP.
218 ● link-protocol x25 3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol x25 Purpose Use the link-protocol x25 command to encapsulate X.25 protocol to the specified interface. Syntax link-protocol x25 [ dte | dce ] [ ietf | nonstandard ] Parameters dte Indicates that the interface works in DTE mode. dce Indicates that the interface works in DCE mode. letf Based on the standard stipulation of the IETF RFC 1356, encapsulate IP or other network protocols on the X.
3Com Router 5000 Family and Router 6000 Family Command Reference map bridge ● 219 map bridge Purpose Use the map bridge command to establish the IPoEoA mapping or PPPoEoA mapping on the PVC. Use the undo map bridge command to delete the mapping. Syntax map bridge virtual-ethernet interface-num undo map bridge Parameters interface-num Default By default, no mapping is configured. Example The following example shows a complete process of IPoEoA configuration. Interface number of a VE interface.
220 ● map bridge-group 3Com Router 5000 Family and Router 6000 Family Command Reference map bridge-group Purpose Use the map bridge-group broadcast command to enable the PVC to transmit and receive BPDUs. Use the undo map bridge-group command to disable the PVC to transmit or receive BPDUs. Syntax map bridge-group broadcast undo map bridge-group Parameters None Default By default, no bridge-group broadcast map is configured, and thus ATM interfaces are disabled to transmit BPDUs.
3Com Router 5000 Family and Router 6000 Family Command Reference map ip ● 221 map ip Purpose Use the map ip command to create IPoA mapping for PVC. Use the undo map ip command to delete the mapping. Syntax map ip { ip-address [ ip-mask ] | default | inarp [ minutes ] } [ broadcast ] undo map ip { ip-address | default | inarp } Parameters ip-address Opposite IP address mapping to PVC. ip-mask IP address mask, optional.
222 ● map ip 3Com Router 5000 Family and Router 6000 Family Command Reference Display how to enable InARP at PVC 1/33 to automatically obtain the opposite address and send InARP packets every 10 minutes. [3Com-atm-pvc-Atm1/0/0.1-1/33] map ip inarp 10 View This command can be used in the following views: ■ Description PVC view When InARP is used, it must be aal5snap encapsulation type. InARP is not supported when aal5mux and aal5nlpid encapsulations are adopted.
3Com Router 5000 Family and Router 6000 Family Command Reference map ppp ● 223 map ppp Purpose Use the map ppp command to create a PPPoA map on the PVC. Use the undo map ppp command to delete the map. Syntax map ppp { virtual-template vt-number [ server ] | dialer dialer-member } undo map ppp Parameters vt-number Number of the virtual template interface corresponding to common PPPoA or PPPoA server. It must be one that already exists. server Configures the PPPoA as the server.
224 ● map ppp 3Com Router 5000 Family and Router 6000 Family Command Reference To configure PPPoA server, use the map ppp virtual-template vt-number server command. To configure PPPoA client, use the map ppp dialer dialer-member command. When PPPoA client mode is adopted, you may configure the dialer timer idle command and the dialer queue-length command in dialer interface view to modify the idle-timeout timer and the buffer queue length.
3Com Router 5000 Family and Router 6000 Family Command Reference map routed-bridge ● 225 map routed-bridge Purpose Use the map routed-bridge command to configure routed bridge encapsulation on the PVC. Use the undo map routed-bridge command to remove routed bridge encapsulation on the PVC. Syntax map routed-bridge virtual-ethernet interface-number undo map routed-bridge Parameters Example virtual-ethernet interface-number The bound VE interface in a routed bridge map entry.
226 ● match 3Com Router 5000 Family and Router 6000 Family Command Reference match Purpose Use the match command to configure a PVC group to differentiate traffic by the Precedence or DSCP identifier in the TOS field of the IP header. Use the undo match command to restore the default. Syntax match { dscp | precedence } undo match Parameters dscp Specifies to differentiate IP packets by the 6-bit DSCP identifier in the TOS field of the IP header.
3Com Router 5000 Family and Router 6000 Family Command Reference mfr bundle-name ● 227 mfr bundle-name Purpose Use the mfr bundle-name command to set frame relay bundle identification (BID). Use the undo mfr bundle-name command to restore the default value. Syntax mfr bundle-name [ name ] undo mfr bundle-name [ name ] Parameters name Default By default, BID is represented by mfr plus frame relay bundle number, for example, mfr4. Example Set the frame relay link BID to bundle 1.
228 ● mfr fragment 3Com Router 5000 Family and Router 6000 Family Command Reference mfr fragment Purpose Use the mfr fragment command to enable FRF.16 fragmentation on the MFR bundle. Use the undo mfr fragment command to disable the function. Syntax mfr fragment undo mfr fragment Parameters None Default By default, FRF.16 fragmentation is disabled on the MFR bundle. Example Enable fragmentation on interface MFR 4.
3Com Router 5000 Family and Router 6000 Family Command Reference mfr fragment-size ● 229 mfr fragment-size Purpose Use the mfr fragment-size command to configure the maximum fragment size allowed on a frame relay bundle link. Use the undo mfr fragment-size command to restore the default setting. Syntax mfr fragment-size bytes undo mfr fragment-size Parameters bytes Example Configure the maximum fragment size allowed on the multilink frame relay bundle link Serial4/1/2 to be 70 bytes.
230 ● mfr link-name 3Com Router 5000 Family and Router 6000 Family Command Reference mfr link-name Purpose Use the mfr link-name command to set the frame relay bundle link identification (LID). Use the undo mfr link-name command to restore the default setting. Syntax mfr link-name [ name ] undo mfr link-name [ name ] Parameters name Default By default, LID is the name of the corresponding physical interface.
3Com Router 5000 Family and Router 6000 Family Command Reference mfr retry ● 231 mfr retry Purpose Use the mfr retry command to set the maximum times that a frame relay bundle link can resend hello message when waiting for a hello acknowledgement message. Use the undo mfr retry command to restore the default setting. Syntax mfr retry number undo mfr retry Parameters number Example Set the bundle link Serial4/1/2 to resend hello message for 3 times at most.
232 ● mfr timer ack 3Com Router 5000 Family and Router 6000 Family Command Reference mfr timer ack Purpose Use the mfr timer ack command to set the time of waiting for hello acknowledgment message before frame relay bundle link resends hello message. Use the undo mfr timer ack command to restore the default setting. Syntax mfr timer ack seconds undo mfr timer ack Parameters seconds Example Set the frame relay bundle link Serial4/1/2 to wait for six seconds before resending hello message.
3Com Router 5000 Family and Router 6000 Family Command Reference mfr timer hello ● 233 mfr timer hello Purpose Use the mfr timer hello command to set the interval for a frame relay bundle link to send hello message. Use the undo mfr timer hello command to restore the default setting. Syntax mfr timer hello seconds undo mfr timer hello Parameters seconds Example Set the bundle link Serial4/0/2 to send hello message once every 15 seconds.
234 ● mfr window-size 3Com Router 5000 Family and Router 6000 Family Command Reference mfr window-size Purpose Use the mfr window-size command to configure the number of fragments that can be held by the window used in sliding window algorithm when multilink frame relay reassembles received fragments. Syntax mfr window-size number undo mfr window-size Parameters number Default By default, the size of a sliding window is equal to the number of physical interfaces of an MFR bundle.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls-exp ● 235 mpls-exp Purpose Use the mpls-exp command to configure the PVC to carry packets of the specified priority levels when the EXP identifier in the MPLS packet is used to identify the priority levels of packets. Use the undo mpls-exp command to remove the configuration.
236 ● mpls-exp Description Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference Note that: ■ If you do not configure the mpls-exp command, MPLS packets of all priorities are carried by the fundamental PVC of the PVC group, that is, the PVC used to construct the PVC group.
3Com Router 5000 Family and Router 6000 Family Command Reference mtu ● 237 mtu Purpose Use the mtu command to set the size of Maximum Transmission Unit (MTU) of the ATM interface. Use the undo mtu command to restore the default of the value. Syntax mtu mtu-number undo mtu Parameters mtu-number Example Display how to set MTU of ATM interface Atm1/0/0 to 1492 bytes. MTU size of ATM interface (in bytes). Valid values are 128 to 2000. If no value is specified, the default is 1500 bytes.
238 ● oam ais-rdi 3Com Router 5000 Family and Router 6000 Family Command Reference oam ais-rdi Purpose Use the oam ais-rdi command to change the parameters related to AIS/RDI alarm cell detection. If no argument is specified, the default value applies. Use the undo oam ais-rdi command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference oam frequency ● 239 oam frequency Purpose Use the oam frequency command to enable the transmission of OAM F5 Loopback cell so as to check the PVC status. You can also enable OAM F5 Loopback retransmission check or modify the related parameters of the retransmission check. Use the undo oam frequency command to disable the transmission and retransmission check of the cell.
240 ● oamping interface 3Com Router 5000 Family and Router 6000 Family Command Reference oamping interface Purpose Use the oamping interface command to enable the specified ATM interface to send OAM cells on the specified PVC for checking link state. Receiving no response upon expiration of the specified time indicates that the link is disconnected, busy, or prone to packet loss.
3Com Router 5000 Family and Router 6000 Family Command Reference pad ● 241 pad Purpose Use the pad command to establish a PAD connection with the remote site. Syntax pad x121-address Parameters x121-address Example Establish a PAD connection, and the destination x121 address is 2. The x121 destination address. <03Com> pad 2 View This command can be used in the following views: ■ Description User view PAD is a kind of application similar to telnet.
242 ● packing timer 3Com Router 5000 Family and Router 6000 Family Command Reference packing timer Purpose Use the packing-timer command to set the maximum waiting time for one PVC. Use the undo packing-timer command to restore the default. Syntax packing-timer time undo packing-timer Parameters time Default By default, the maximum waiting time for PVC packing is 40 milliseconds. Example Configure the maximum waiting time for PVC packing on PVC1/32 to 22. Maximum waiting time for PVC packing.
3Com Router 5000 Family and Router 6000 Family Command Reference pvp create ● 243 pvp create Purpose Use the pvp create command to create a virtual path. Use the undo pvp create command to delete the virtual path. Syntax pvp create vpi undo pvp create Parameters vpi Default By default, no virtual path is created. Example Create a virtual path with vpi of 22. Virtual path identifier of ATM network. Valid values are 0 to 4095.
244 ● ppp authentication-mode 3Com Router 5000 Family and Router 6000 Family Command Reference ppp authentication-mode Purpose Use the ppp authentication-mode command to set the mode that the local PPP uses to authenticate the peer router. Use the undo ppp authentication-mode command to disable authentication. Syntax ppp authentication-mode { chap | pap } [call-in | domain isp-name ] undo ppp authentication-mode Parameters chap, pap Authentication mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp authentication-mode ● 245 In addition, the defined AAA authentication algorithm list can be used. Either CHAP or PAP is just an authentication process. The success of the authentication is decided by AAA, which can authenticate on the basis of the local authentication database or AAA server.
246 ● ppp chap user 3Com Router 5000 Family and Router 6000 Family Command Reference ppp chap user Purpose Use the ppp chap user command to configure the user name when performing the CHAP authentication. Use the undo ppp chap user command to delete the existing configuration. Syntax ppp chap user username undo ppp chap user Parameters username Default By default, the user name of the CHAP authentication is blank.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp chap password ● 247 ppp chap password Purpose Use the ppp chap password command to configure the password for CHAP authentication. Use the undo ppp chap password command to cancel the configuration. Syntax ppp chap password { simple | cipher } password undo ppp chap password Parameters Example password Password. simple Indicates to display the password in plain text. cipher Indicates to display the password in ciphertext.
248 ● ppp compression iphc 3Com Router 5000 Family and Router 6000 Family Command Reference ppp compression iphc Purpose Use the ppp compression iphc command to enable IP header compression on the interface. Use the undo ppp compression iphc command to disable IP header compression. Syntax ppp compression iphc [ nonstandard ] undo ppp compression iphc Parameters nonstandard Default By default, TCP header compression and RTP header compression are disabled on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp compression iphc rtp-connections ● 249 ppp compression iphc rtp-connections Purpose Use the ppp compression iphc rtp-connections command to designate the connections number of IP Header Compression allowed on one interface. Use the undo ppp compression iphc rtp-connections command to cancel the configuration and restore the default value.
250 ● ppp compression iphc tcp-connections 3Com Router 5000 Family and Router 6000 Family Command Reference ppp compression iphc tcp-connections Purpose Use the ppp compression iphc tcp-connections command to configure the connection number of TCP compression mode. Use the undo ppp compression iphc tcp-connections command to restore the default connection number of TCP compression mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp compression stac-lzs ● 251 ppp compression stac-lzs Purpose Use the ppp compression stac-lzs command to enable STAC-LZS compression for PPP. Use the undo ppp compression stac-lzs command to disable STAC-LZS compression on the current interface. Syntax ppp compression stac-lzs undo ppp compression stac-lzs Parameters None Default By default, compression is disabled. Example Enable STAC compression on the local router.
252 ● ppp ipcp dns 3Com Router 5000 Family and Router 6000 Family Command Reference ppp ipcp dns Purpose Use the ppp ipcp dns command to enable the router to allocate a DNS address to the peer. Use the undo ppp ipcp dns command to disable the router to allocate a DNS server address to the peer. Syntax ppp ipcp dns primary-dns-address [ secondary-dns-address ] undo ppp ipcp dns primary-dns-address [ secondary-dns-address ] Parameters primary-dns-address Address of the primary DNS server.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp ipcp dns admit-any ● 253 ppp ipcp dns admit-any Purpose Use the ppp ipcp dns admit-any command to enable the router to accept the unsolicited DNS server address allocated by the peer without sending a DNS request. Use the undo ppp ipcp dns admit-any command to disable the router to accept the unsolicited DNS server address allocated by the peer.
254 ● ppp ipcp dns request 3Com Router 5000 Family and Router 6000 Family Command Reference ppp ipcp dns request Purpose Use the ppp ipcp dns request command to enable the router to request the peer for a DNS server address. Use the undo ppp ipcp dns request command to disable the router to request the peer for a DNS server address. Syntax ppp ipcp dns request undo ppp ipcp dns request Parameters None Default By default, the router is disabled to request the peer for a DNS server address.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp ipcp remote-address forced ● 255 ppp ipcp remote-address forced Purpose Use the ppp ipcp remote-address forced command to forbid the peer to use the fix self-configured IP address but the one allocated by this router. Use the undo ppp ipcp remote-address forced command to cancel the setting of forcible address allocation, allowing the peer to use its self-configured IP address.
256 ● ppp lcp mru consistent 3Com Router 5000 Family and Router 6000 Family Command Reference ppp lcp mru consistent Purpose Use the ppp lcp mru consistent command to enable PPP LCP to negotiation maximum receive unit (MRU). Use the undo ppp lcp mru consistent command to restore the default. Syntax ppp lcp mru consistent undo ppp lcp mru consistent Parameters None Default By default, PPP LCP does not negotiate MRU; the local end modifies MTU depending on the remote MRU.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp lqc ● 257 ppp lqc Purpose Use the ppp lqc command to enable PPP link quality control (LQC). Use the undo ppp lqc command to disable PPP link quality control. Syntax ppp lqc forbidden-percentage [ resumptive-percentage ] undo ppp lqc Parameters Default forbidden-percentage Link quality percentage threshold. Once the quality of a link decreased below this percentage, the link is taken down. Valid values are 0 to 100.
258 ● ppp lqc 3Com Router 5000 Family and Router 6000 Family Command Reference resulting in inability of LQC to work. LQC can operate again only after the DCC brings the dial-up line up again for transmitting data.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp ● 259 ppp mp Purpose Use the ppp mp command to enable the interface encapsulated with PPP to operate in the MP mode. Use the undo ppp mp command to enable the interface to operate in the Single PPP mode Syntax ppp mp undo ppp mp Parameters None Default By default, the interface encapsulated with PPP operates in the Single PPP mode. Example Configure the PPP encapsulated interface Serial0/0/0 to work in MP mode.
260 ● ppp mp binding-mode 3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp binding-mode Purpose Use the ppp mp binding-mode command to set the MP binding condition. Use the undo ppp mp binding-mode command to restore the default value of the MP binding condition. Syntax ppp mp binding-mode { authentication | both | descriptor } undo ppp mp binding-mode Parameters authentication Performs the MP binding according to the authentication user name of PPP.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp lfi ● 261 ppp mp lfi Purpose Use the ppp mp lfi command to enable link fragmentation and interleaving (LFI) on the interface. Use the undo ppp mp lfi command to remove LFI from the interface. Syntax ppp mp lfi undo ppp mp lfi Parameters None Default By default, the time delay of the fragment is 10ms after LFI is enabled on the Virtual Template interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp lfi delay-per-frag ● 263 ppp mp lfi delay-per-frag Purpose Use the ppp mp lfi delay-per-frag command to set the maximum time delay for transmitting a LFI fragment. Use the undo ppp mp lfi delay-per-frag command to restore the default maximum time delay for transmitting an LFI fragment.
264 ● ppp mp max-bind 3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp max-bind Purpose Use the ppp mp max-bind command to configure maximum number of bound links of MP. Use the undo ppp mp max-bind command to restore the default configuration. Syntax ppp mp max-bind max-bind-num undo ppp mp max-bind Parameters max-bind-num Default By default, its value is 16. Example Set the maximum number of bound links to 12. Indicates maximum number of links that can be bound.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp min-bind ● 265 ppp mp min-bind Purpose Use the ppp mp min-bind command to configure the minimum number of PPP links that an MP bundle must have. Use the undo ppp mp min-bind command to restore the default when a call requires only one PPP link. Syntax ppp mp min-bind min-bind-num undo ppp mp min-bind Parameters min-bind-num Default By default, no lower limit of links is set for MP bundling.
266 ● ppp mp min-fragment 3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp min-fragment Purpose Use the ppp mp min-fragment command to set minimum size of outgoing fragments. Use the undo ppp mp min-fragment command to restore the default, that is, 128 bytes. Syntax ppp mp min-fragment size undo ppp mp min-fragment Parameters size Example Set the minimum packet of the MP packet fragmentation to 500 bytes. Minimum packet size for MP outgoing packet fragmentation.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp mp-group ● 267 ppp mp mp-group Purpose Use the ppp mp mp-group command to add the current interface to the specified MP-group. Use the undo ppp mp mp-group command to remove the current interface from the specified MP-group. Syntax ppp mp mp-group number undo ppp mp mp-group number Parameters number Example Add serial interface 3/0/0 to MP-group 3. MP-group interface number.
268 ● ppp mp sort-buffer-size 3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp sort-buffer-size Purpose Use the ppp mp sort-buffer-size command to set the size of the MP sort window. Use the undo ppp mp sort-buffer-size command to restore the default. Syntax ppp mp sort-buffer-size size undo ppp mp sort-buffer-size Parameters size Example Configure and display the size of the sort window. Size of the sort window. Valid values are 1 to 64.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp user ● 269 ppp mp user Purpose Use the ppp mp user command to bind an MP user to a virtual template. Use the undo ppp mp user command to remove the specified binding. Syntax ppp mp user username bind virtual-template number undo ppp mp user username Parameters Example username User name, consisting of a string from 1 to 80 characters long. number Virtual-template number.
270 ● ppp mp virtual-template 3Com Router 5000 Family and Router 6000 Family Command Reference ppp mp virtual-template Purpose Use the ppp mp virtual-template command to configure the virtual template number to be bound by the interface. Use the undo ppp mp command to disable the MP binding of the interface. Syntax ppp mp virtual-template number undo ppp mp Parameters number Default By default, the MP binding of the interface is disabled, and the interface works in ordinary PPP mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp pap local-user ● 271 ppp pap local-user Purpose Use the ppp pap local-user command to configure the username and password sent by the local router when it is authenticated by the peer router via the PAP method. Use the undo ppp pap local-user command to disable the configuration.
272 ● ppp timer negotiate 3Com Router 5000 Family and Router 6000 Family Command Reference ppp timer negotiate Purpose Use the ppp timer negotiate command to set the PPP negotiation timeout. Use the undo ppp timer negotiate command to restore the default value. Syntax ppp timer negotiate seconds undo ppp timer negotiate Parameters seconds Example Set the PPP negotiation timeout to 5 seconds. Time of negotiation timeout (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-client ● 273 pppoe-client Purpose Use the pppoe-client command to establish a PPPoE session and specify the Dialer Bundle corresponding to the session. Use the undo pppoe-client command to delete a PPPoE session.
274 ● pppoe-client 3Com Router 5000 Family and Router 6000 Family Command Reference one-to-one. If the Dialer Bundle at a certain Dialer has had one Ethernet interface used by PPPoE, any other interfaces cannot be added to this Dialer Bundle. Likewise, if Dialer Bundle has had interfaces other than the PPPoE Ethernet interface, this Dialer Bundle can also not be added to the Ethernet interface used by PPPoE Client.
3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-server bind virtual-template ● 275 pppoe-server bind virtual-template Purpose Use the pppoe-server bind virtual-template command to enable PPPoE on the virtual-template specified by the Ethernet interface. Use the undo pppoe-server bind command to disable PPPoE protocol on the relevant interface.
276 ● pppoe-server log-information off 3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-server log-information off Purpose Use the pppoe-server log-information off command to enable the PPPoE server to output the PPP-related log information. Use the undo pppoe-server log-information off command to disable the PPPoE server to output the PPP-related log information.
3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-server max-sessions local-mac ● 277 pppoe-server max-sessions local-mac Purpose Use the pppoe-server max-sessions local-mac command to set the maximum number of PPPoE sessions that can be established at a local MAC address. Use the undo pppoe-server max-sessions local-mac command to restore the default configuration.
278 ● pppoe-server max-sessions remote-mac 3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-server max-sessions remote-mac Purpose Use the pppoe-server max-sessions remote-mac command to set the maximum number of PPPoE sessions that can be established at a peer MAC address. Use the undo pppoe-server max-sessions remote-mac command to restore the default configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference pppoe-server max-sessions total ● 279 pppoe-server max-sessions total Purpose Use the pppoe-server max-sessions total command to set the maximum number of PPPoE sessions that the system can establish. Use the undo pppoe-server max-sessions total command to restore the default configuration.
280 ● pvc 3Com Router 5000 Family and Router 6000 Family Command Reference pvc Purpose Use the pvc command to create a PVC or enter the PVC view at ATM interface or in PVC-Group view. Use the undo pvc command to delete the specified PVC. Syntax pvc { pvc-name [ vpi/vci ] | vpi/vci } undo pvc { pvc-name [ vpi/vci ] | vpi/vci } Parameters pvc-name PVC name, whose maximum length is 16 characters. It shall be unique at ATM interface (case insensitive), and can not be a legal VPI/VCI pair.
3Com Router 5000 Family and Router 6000 Family Command Reference View Description pvc ● 281 This command can be used in the following views: ■ ATM Interface view ■ PVC-Group view Use the pvc command to create a PVC or enter the PVC view at ATM interface or in PVC-Group view. Use the undo pvc command to delete the specified PVC. This command is used to create a PVC with specified VPI/VCI. Once pvc-name is specified for one PVC (e.g.
282 ● pvc-group 3Com Router 5000 Family and Router 6000 Family Command Reference pvc-group Purpose Use the pvc-group command to create a PVC-Group or enter the PVC-Group view at ATM interface. Use the undo pvc-group command to delete the specified PVC-Group. Syntax pvc-group { pvc-name [ vpi/vci ] | vpi/vci } undo pvc-group { pvc-name [ vpi/vci ] | vpi/vci } Parameters Example pvc-name PVC name, whose maximum length is 16 characters. It is case insensitive and should be unique at ATM interface.
3Com Router 5000 Family and Router 6000 Family Command Reference pvc max-number ● 283 pvc max-number Purpose Use the pvc max-number command to set the maximum number of ATM interface virtual circuits (VC). Use the undo pvc max-number command to restore the default value. Syntax pvc max-number max-number undo pvc max-number Parameters Maximum number of supported VCs.
284 ● pvc max-number 3Com Router 5000 Family and Router 6000 Family Command Reference This command is used to set the maximum number of the total available VCs for ATM main interfaces and sub-interfaces. Although this command is valid on both ATM main interface and sub-interface, it can only be used in ATM main interface view and there is not this command in ATM sub-interface view.
3Com Router 5000 Family and Router 6000 Family Command Reference pvc-protect ● 285 pvc-protect Purpose Use the pvc-protect command to configure the protection mode for a PVC in a PVC group. Use the undo pvc-protect command to remove protection of a PVC group member.
286 ● pvc-protect 3Com Router 5000 Family and Router 6000 Family Command Reference ■ When a PVC group member that is configured to be protected in individual mode goes down, its standby PVC (if any) does not take over, while the PVC specified with the default keyword does instead. If no PVC is specified with the default keyword, the fundamental PVC takes over.
3Com Router 5000 Family and Router 6000 Family Command Reference pvp limit ● 287 pvp limit Purpose Use the pvp limit command to set the parameters for VP policing. Use the undo pvp limit command to delete the VP policing. Syntax pvp limit vpi peak-rate undo pvp limit vpi Parameters vpi Virtual path identifier of ATM network, its value ranges from 0 to 255. peak-rate Normal flow to be held.
288 ● pvp limit 3Com Router 5000 Family and Router 6000 Family Command Reference ■ service vbr-rt ■ service ubr
3Com Router 5000 Family and Router 6000 Family Command Reference reset bridge address-table ● 289 reset bridge address-table Purpose Use the reset bridge command to clear all the dynamic address entries or the entries of a specified bridge set or a specified interface in the forwarding table. Syntax reset bridge address-table [ bridge-set bridge-set | interface interface-type interface-number ] Parameters bridge-set Bridge set number. Valid values are an integer from 1 to 255.
290 ● reset bridge traffic 3Com Router 5000 Family and Router 6000 Family Command Reference reset bridge traffic Purpose Use the reset bridge traffic command to clear the traffic statistics of a bridge set on a interface. Syntax reset bridge traffic [ bridge-set bridge-set | interface interface-type interface-number | dlsw ] Parameters bridge-set Bridge set number. Valid values are 1 to 255. interface-type Interface type. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset firewall ethernet-frame-filter ● 291 reset firewall ethernet-frame-filter Purpose Use the reset firewall ethernet-frame-filter command to clear the ACL-based firewall statistics. Syntax reset firewall ethernet-frame-filter { all | dlsw | interface interface-type interface–number } Parameters all Statistics of all ACLs. dlsw Statistics about DLSw on the firewall. interface-type Interface type.
292 ● reset fr inarp 3Com Router 5000 Family and Router 6000 Family Command Reference reset fr inarp Purpose Use the reset fr inarp command to clear the address mapping established by inverse ARP. Syntax reset fr inarp Parameters None Example Clear all the Frame Relay dynamic address maps.
3Com Router 5000 Family and Router 6000 Family Command Reference reset lapb ● 293 reset lapb Purpose Use the reset lapb statistics command to clear the statistics about LAPB. Syntax reset lapb statistics Parameters None Example Clear the statistics about LAPB.
294 ● reset ppp compression iphc 3Com Router 5000 Family and Router 6000 Family Command Reference reset ppp compression iphc Purpose Use the reset ppp compression iphc command to delete the invalid IP/UDP/RTP header compression or decompression context storage table and clear statistic information of IP/UDP/RTP header compression. Syntax reset ppp compression iphc [ interface-type interface-number ] Parameters Interface-type Interface type. Interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ppp compression stac-lzs ● 295 reset ppp compression stac-lzs Purpose Use the reset ppp compression stac-lzs command to clear statistics about STAC-LZS compression. Syntax reset ppp compression stac-lzs [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Clear statistics about STAC-LZS on all the interfaces.
296 ● reset pppoe-client 3Com Router 5000 Family and Router 6000 Family Command Reference reset pppoe-client Purpose Use the reset pppoe-client command to terminate PPPoE session and re-initiate the connection later. Syntax reset pppoe-client { all | dial-bundle-number number } Parameters all Clears all PPPoE sessions. dial-bundle-number number Dialer Bundle number, which is used to clear the PPPoE session corresponding to Dialer Bundle. Valid values are 1 to 255..
3Com Router 5000 Family and Router 6000 Family Command Reference reset pppoe-server ● 297 reset pppoe-server Purpose Use the reset pppoe-server command to clear PPPoE sessions at the server end. Syntax reset pppoe-server { all | virtual-template number | interface interface-type interface-num } Parameters all Clears all PPPoE sessions. virtual-template number Specifies a virtual template by its number. interface interface-type interface-num Specifies an interface by its type and number.
298 ● reset stp statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset stp statistics Purpose Use the reset stp statistics command to clear statistics about the spanning tree. Syntax reset stp statistics Parameters None Example Clear statistics about the spanning tree.
3Com Router 5000 Family and Router 6000 Family Command Reference reset x25 ● 299 reset x25 Purpose Use the reset x25 command to reset statistics about X.25 on the specified interface or to reset the specified X.25 VC. Syntax reset x25 { counters interface type number | vc interface type number [ pvc-number ] } Parameters counters Resets interface statistics. vc Rests X.25 circuits. interface type number Specifies an interface by its type and number. pvc-number PVC number.
300 ● reset xot 3Com Router 5000 Family and Router 6000 Family Command Reference reset xot Purpose For SVC, use the reset xot command to initiatively clear an XOT link. For PVC, use the reset xot command to initiatively reset an XOT link. Syntax reset xot local local-ip-address local-port remote remote-ip-address remote-port Parameters local-ip-address Local IP address of the XOT connection. local-port Local port number of the XOT connection.
3Com Router 5000 Family and Router 6000 Family Command Reference routed-bridge protocol ● 301 routed-bridge protocol Purpose Use the routed-bridge protocol command to enable the support of routed bridge encapsulation to a network protocol. Use the undo routed-bridge protocol command to disable the support of routed bridge encapsulation to a network protocol.
302 ● service cbr 3Com Router 5000 Family and Router 6000 Family Command Reference service cbr Purpose Use the service cbr command to specify PVC service type as constant bit rate (CBR). Syntax service cbr output-pcr [ cdvt cdvt_value ] Parameters output-pcr Output peak rate of ATM cell in kbps. Value range of this parameter depends on interface type, as shown in the following table.
3Com Router 5000 Family and Router 6000 Family Command Reference service cbr ● 303 This command is used to set the PVC service type and parameter. The newly specified PVC service type will replace the existing service type. It is recommended that the PVC with larger bandwidth be created first and then the one with smaller bandwidth. If the creation fails, the cdvt_value can be adjusted larger to create the PVC once more.
304 ● service ubr 3Com Router 5000 Family and Router 6000 Family Command Reference service ubr Purpose Use the service ubr command to specify the service type of PVC as Unspecified Bit Rate (UBR) and specify the related rate parameters. Syntax service ubr output-pcr Parameters output-pcr Output peak rate of ATM cell in kbps. For the value ranges of this parameter, see the following table.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ service vbr-nrt ■ service vbr-rt ■ service cbr service ubr ● 305
306 ● service vbr-nrt 3Com Router 5000 Family and Router 6000 Family Command Reference service vbr-nrt Purpose Use the service vbr-nrt command to specify the service type of PVC as Variable Bit Rate-Non Real Time (VBR-NRT) and specify the related rate parameters. Syntax service vbr-nrt output-pcr output-scr output-mbs Parameters output-pcr Peak rate of ATM cell output in kbps. For the value ranges of this parameter, see Table 1. output-scr Sustainable rate of ATM cell output in Kbps.
3Com Router 5000 Family and Router 6000 Family Command Reference Description service vbr-nrt ● 307 Use the service vbr-nrt command to specify the service type of PVC as Variable Bit Rate-Non Real Time (VBR-NRT) and specify the related rate parameters. This command as well as the service ubr, service vbr-rt and service cbr commands can be used to set the service type and service parameters of PVC. The newly specified PVC service type will replace the existing service type.
308 ● service vbr-rt 3Com Router 5000 Family and Router 6000 Family Command Reference service vbr-rt Purpose Use the service vbr-rt command to set the service type of PVC to Variable Bit Rate- Real Time (VBR-RT) and specify the related rate parameters in the PVC view. Syntax service vbr-rt output-pcr output-scr output-mbs Parameters output-pcr Peak cell rate of ATM output in Kbps. For the value ranges of this parameter, see Table 1. output-scr Sustainable cell rate of ATM output in Kbps.
3Com Router 5000 Family and Router 6000 Family Command Reference Description service vbr-rt ● 309 Use the service vbr-rt command to set the service type of PVC to Variable Bit Rate - Real Time (VBR-RT) and specify the related rate parameters in the PVC view. This command as well as the service ubr, service cbr and service vbr-nrt commands can be used to set the service type and service parameters of PVC. The newly specified PVC service type will replace the existing service type.
310 ● shutdown 3Com Router 5000 Family and Router 6000 Family Command Reference shutdown Purpose Use the shutdown command to disable the current switching PVC. Use the undo shutdown command to enable the current switching PVC. Syntax shutdown undo shutdown Default By default, the switching PVC is enabled. Example Disable the current switching PVC.
3Com Router 5000 Family and Router 6000 Family Command Reference timer hold ● 311 timer hold Purpose Use the timer hold command to set the polling interval. Use the undo timer hold command to restore the default value of the polling interval. Syntax timer hold seconds undo timer hold Parameters seconds Default By default, the value of seconds is 10 seconds. Example Set the value of polling interval on interface Serial1/0/0 to 100 seconds. Value of the polling interval (in seconds).
312 ● timer hold 3Com Router 5000 Family and Router 6000 Family Command Reference timer hold Purpose Use the timer hold command to configure the polling timer at the DTE side. Use the undo timer hold command to restore its default value. Syntax timer hold seconds undo timer hold Parameters seconds Example Configure that Frame Relay interface serial1/0/0 to work in DTE mode, and set the value of polling timer to 15 seconds. Value of polling timer (in seconds). Valid values are 0 to 32767.
3Com Router 5000 Family and Router 6000 Family Command Reference timer hold ● 313 timer hold Purpose Use the timer hold command to set the timer to send keepalive packet. Use the undo timer hold command to restore the default value. Syntax timer hold seconds undo timer hold Parameters seconds Example Set the PPP timer hold to 20 seconds. Time interval for the interface to send keepalive packet (in seconds). Valid values are 0 to 32767. If no value is specified, the default is 10.
314 ● translate ip 3Com Router 5000 Family and Router 6000 Family Command Reference translate ip Purpose Use the translate ip command to configure an X2T forwarding route from IP network to X.25 network. Use the undo translate ip command to cancel a configured X2T forwarding route from IP network to X.25 network. Syntax translate ip ip-address port port-number { x25 x.
3Com Router 5000 Family and Router 6000 Family Command Reference translate x25 ● 315 translate x25 Purpose Use the translate x25 command to configure an X2T forwarding route from X.25 network to IP network. Use the undo translate x25 command to cancel this configuration. Syntax translate x25 x.121-address ip ip-address port port-number undo translate x25 x.121-address Parameters Example x.121-address Destination address of X.121. ip IP address of the remote host to be connected.
316 ● transmit-priority 3Com Router 5000 Family and Router 6000 Family Command Reference transmit-priority Purpose Use the transmit-priority command to assign a transmit priority to the ATM PVC associated with the UBR, VBR-T, or VBR-NRT service. The higher priority PVC is allocated bandwidth before any other PVCs. Uses the undo transmit-priority command to restore the default transmit priority of the PVC according to the associated service type.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 alias-policy ● 317 x25 alias-policy Purpose Use the x25 alias-policy command to configure the alias of an X.121 address. Use the undo x25 alias-policy command to delete the alias of an X.121 address. Syntax x25 alias-policy match-type alias-string undo x25 alias-policy match-type alias-string Parameters match-type alias-string Match type of the alias.
318 ● x25 alias-policy Description 3Com Router 5000 Family and Router 6000 Family Command Reference When an X.25 call is forwarded between networks, different X.25 networks may perform some operations on the destination addresses (that is, the called DTE address) carried by this call packet, for example, regularly adding or deleting the prefix and suffix. In this case, a user needs to set an interface alias for the router to adapt this change.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 call-facility ● 319 x25 call-facility Purpose Use the x25 call-facility command to set user options for an X.25 interface. After an option is set, all X.25 calls from the X.25 interface will carry the relevant information field in call packet. Use the undo x25 call-facility command to delete the set option.
320 ● x25 call-facility 3Com Router 5000 Family and Router 6000 Family Command Reference Default By default, no facility is set. Example Specify the flow control parameter negotiation with the peer end for the calls from the X.25 interface serial0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 cug-service ● 321 x25 cug-service Purpose Use the x25 cug-service command to enable CUG service and suppression policies. Use the undo x25 cug-service command to disable CUG service.
322 ● x25 cug-service 3Com Router 5000 Family and Router 6000 Family Command Reference If the suppress all parameter is chosen, the system removes CUG facilities for the incoming calls with CUG facilities and makes call processing. This parameter is ineffective to outgoing calls. When the suppress preferential parameter, if an incoming call with CUG facilities and the suppression rule is preferential, the system then removes its CUG facilities and make call processing.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 default-protocol ● 323 x25 default-protocol Purpose Use the x25 default-protocol command to set the default upper-layer protocol carried over X.25 for the X.25 interface. Use the undo x25 default-protocol command to restore the default upper-layer protocol. Syntax x25 default-protocol protocol-type undo x25 default-protocol Parameters protocol-type Default By default, IP is carried over X.25.
324 ● x25 hunt-group 3Com Router 5000 Family and Router 6000 Family Command Reference x25 hunt-group Purpose Use the x25 hunt-group command to create or enter an X.25 hunt group. Use the undo x25 hunt-group command to delete the specified X.25 hunt group. Syntax x25 hunt-group hunt-group-name { round-robin | vc-number } undo x25 hunt-group hunt-group-name Parameters Example hunt-group-name Name of hunt group. round-robin Select call channel using cyclic selection policy.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 ignore called-address ● 325 x25 ignore called-address Purpose Use the x25 ignore called-address command to enable it to ignore the X.121 address of the called DTE when X.25 initiates calls. Use the undo x25 ignore called-address command to disable this function. Syntax x25 ignore called-address undo x25 ignore called-address Parameters None Default By default, this function is disabled.
326 ● x25 ignore calling-address 3Com Router 5000 Family and Router 6000 Family Command Reference x25 ignore calling-address Purpose Use the x25 ignore calling-address command to enable it to ignore the X.121 address of the calling DTE when X.25 initiates calls. Use the undo x25 ignore calling-address command to disable this function. Syntax x25 ignore calling-address undo x25 ignore calling-address Parameters None Default By default, this function is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 local-cug ● 327 x25 local-cug Purpose Use the x25 local-cug command to configure mapping from local CUG to network CUG and define its suppression rule. Use the undo x25 local-cug command to remove the mapping from local CUG to network CUG. Syntax x25 local-cug cug-number network-cug cug-number [ no-incoming ] [ no-outgoing ] [ preferential ] undo x25 local-cug cug-number Parameters local-cug cug-number Number of local cug.
328 ● x25 map 3Com Router 5000 Family and Router 6000 Family Command Reference x25 map Purpose Use the x25 map command to set the address mapping between IP address used by LANs and X.121 address. Use the undo x25 map command to delete one existing mapping. Syntax x25 map { ip | compressedtcp } protocol-address x121-address x.121-address [ option ] undo x25 map { ip | compressedtcp } protocol-address Parameters ip Uses IP protocol. compressedtcp Uses TCP header compression.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 map ● 329 Two or more address mappings with an identical protocol address shall not exist on the same X.25 interface. Detailed explanations are as follows: broadcast: Sends any broadcasts of internetworking protocol and the multicast of IP to the destination. This option provides powerful support for some routing protocols (such as Routing Information Protocol).
330 ● x25 map 3Com Router 5000 Family and Router 6000 Family Command Reference ■ x25 timer idle ■ x25 vc-per-map
3Com Router 5000 Family and Router 6000 Family Command Reference x25 map bridge ● 331 x25 map bridge Purpose Use the x25 map bridge command to map an X.121 address to a bridge-set. Use the undo x25 map bridge command to delete the configured map entry. Syntax x25 map bridge x121-address x.121-address broadcast undo x25 map bridge x121-address x.121-address Parameters x121-address x.121-addressRemote X.121 address. broadcast Sends broadcast packets to the X.25 destination.
332 ● x25 modulo 3Com Router 5000 Family and Router 6000 Family Command Reference x25 modulo Purpose Use the x25 modulo command to set the window modulus of an X.25 interface. Use the undo x25 modulo command to restore its default window modulus. Syntax x25 modulo modulus undo x25 modulo Parameters modulus Example Set the modulus on the X.25 interface Serial0/0/0 to 128. Modulus, whose value is 8 or 128. If no value is specified, the default window modulus of the X.25 interface is modulus 8 mode.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 packet-size ● 333 x25 packet-size Purpose Use the x25 packet-size command to set the maximum input and output packet lengths of X.25 interface. Use the undo x25 packet-size command to restore their default values. Syntax x25 packet-size input-packet output-packet undo packet-size Parameters Example input-packet Maximum input packet length (in bytes).
334 ● x25 packet-size 3Com Router 5000 Family and Router 6000 Family Command Reference ■ x25 switch pvc ■ x25 xot pvc ■ x25 fr pvc
3Com Router 5000 Family and Router 6000 Family Command Reference x25 pvc ● 335 x25 pvc Purpose Use the x25 pvc command to configure one PVC route encapsulated with datagram. Use the undo x25 pvc command to delete this route. Syntax x25 pvc pvc-number protocol-type protocol-address [ compressedtcp ] x121-address x.121-address [ option ] undo x25 pvc pvc-number Parameters pvc-number PVC number. Valid values are 1 to 4094 (inclusive), and must be in the PVC channel range.
336 ● x25 pvc 3Com Router 5000 Family and Router 6000 Family Command Reference Before establishing PVCs, users should first enable the PVC channel section. The section is between 1 and the latest unprohibited channel section PVC number minus 1 (including 1 and the lowest PVC number minus 1). Naturally, if the lowest PVC number is 1, the PVC section will be disabled naturally. The following table shows some typical PVC sections.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 queue-length ● 337 x25 queue-length Purpose Use the x25 queue-length command to set the data queue length on X.25 VC. Use the undo x25 queue-length command to restore its default value. Syntax x25 queue-length queue-length undo x25 queue-length Parameters queue-length Example Set the VC data queue length of the X.25 interface Serial0/0/0 to 75 datagrams. Queue length (in packets).
338 ● x25 receive-threshold 3Com Router 5000 Family and Router 6000 Family Command Reference x25 receive-threshold Purpose Use the x25 receive-threshold command to set the number of receivable maximum packets before X.25 sends the acknowledged packet. Use the undo x25 receive-threshold command to restore its default value. Syntax x25 receive-threshold count undo x25 receive-threshold Parameters count Example Specify that each VC on the X.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 response called-address ● 339 x25 response called-address Purpose Use the x25 response called-address command to enable X.25 to carry the address information of the called DTE in sending call reception packet. Use the undo x25 response called-address command to disable the above function. Syntax x25 response called-address undo x25 response called-address Parameters None Default By default, this function is disabled.
340 ● x25 response calling-address 3Com Router 5000 Family and Router 6000 Family Command Reference x25 response calling-address Purpose Use the x25 response calling-address command to enable X.25 to carry the address information of the calling DTE in sending call reception packet. Use the undo x25 response calling-address command to disable the above function. Syntax x25 response calling-address undo x25 response calling-address Parameters None Default By default, this function is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 reverse-charge-accept ● 341 x25 reverse-charge-accept Purpose Use the x25 reverse-charge-accept command to enable this interface to accept the call with “reverse charging request”, the information added by some certain user facilities. Use the undo x25 reverse-charge-accept command to disable this above function.
342 ● x25 roa-list 3Com Router 5000 Family and Router 6000 Family Command Reference x25 roa-list Purpose Use the x25 roa-list command to define ROA list. Use the undo x25 roa-list command to delete ROA list items. Syntax x25 roa-list roa-name roa-id1 [ , id2, id3.... ] undo x25 roa-list roa-name id1 [ , id2, id3.... ] Parameters roa-name Name of ROA. id ID specified for this ROA. Valid values are 0 to 9999. You can specify multiple IDs for the ROA. Default By default, no ROA list is defined.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 switch pvc ● 343 x25 switch pvc Purpose Use the x25 switch pvc (packet switching) command to configure one PVC route. Use the undo x25 switch pvc command to delete one PVC route. Syntax x25 switch pvc pvc-number1 interface serial number pvc ] pvc-number2 [ option undo x25 switch pvc pvc-number1 Parameters pvc-number1 PVC number on the input interface. Valid values are 1 to 4095. pvc-number2 PVC number on the output interface.
344 ● x25 switch pvc 3Com Router 5000 Family and Router 6000 Family Command Reference packet-size input-packet output-packet: Specifies the maximum receiving packet length and maximum sending packet length. The length is counted in byte, which must range from 16 to 4096 (including 16 and 4096), and must be the integer power of 2.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 switch svc hunt-group ● 345 x25 switch svc hunt-group Purpose Use the x25 switch svc hunt-group command to add an X.25 switching route whose forwarding address is a hunt group. Use the undo x25 switch svc hunt-group command to delete the specified X.25 switching route. Syntax x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source source-address ] hunt-group hunt-group-name undo x25 switch svc x.
346 ● x25 switch svc hunt-group 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 x.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 switch svc interface ● 347 x25 switch svc interface Purpose Use the x25 switch svc interface command to add an X.25 switching route whose forwarding address is a serial interface or Annex G DLCI. Use the undo x25 switch svc xot command to delete the specified X.25 switching route. Syntax x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source source-address ] interface serial interface-number undo x25 switch svc x.
348 ● x25 switch svc interface Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ x25 switch svc xot ■ display x25 x2t switch-table ■ x25 switching
3Com Router 5000 Family and Router 6000 Family Command Reference x25 switch svc xot ● 349 x25 switch svc xot Purpose Use the x25 switch svc xot command to add an X.25 switching route whose forwarding address is XOT channel. Use the undo x25 switch svc xot command to delete the specified X.25 switching route. Syntax x25 switch svc x.121-address [ sub-dest destination-address ] [ sub-source source-address ] xot ip-address1 [ ip-address2 ] … [ ip-address6 ] [ xot-option ] undo x25 switch svc x.
350 ● x25 switch svc xot 3Com Router 5000 Family and Router 6000 Family Command Reference Table 2 input rules of x.121 address mode matching string (continued) Characters Input rules ^ Cannot be placed before the symbols + and *. sub-dest destination-address Substitution destination address. sub-source source-address Substitution source address. ip-address1 - ip-address6 Destination IP address of XOT connection, up to 6 addresses can be configured. xot-option XOT channel parameter option.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 switching ● 351 x25 switching Purpose Use the x25 switching command to enable the X.25 switching function. Use the undo x25 switching command to disable this function, which will not affect the established VC switching function. Syntax x25 switching undo x25 switching Parameters None Default By default, X.25 packet switching function is disabled. Example Enable X.25 switching function.
352 ● x25 template 3Com Router 5000 Family and Router 6000 Family Command Reference x25 template Purpose Use the x25 template command in system view to create an X.25 template and in DLCI view to reference the template. Use the undo x25 template command to delete an X.25 template or remove the referenced template from the frame relay interface. Syntax x25 template name undo x25 template name Parameters name Example Create an X.25 template. X.25 template name.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer hold ● 353 x25 timer hold Purpose Use the x25 timer hold command to set the delay to send calls to a destination with failed calls. Use the undo x25 timer hold command to restore its default value. Syntax x25 timer hold minutes undo x25 timer hold Parameters minutes Example Set the parameter of the X.25 interface Serial0/0/0 to 5 minutes. Value of delay time (in minutes). Valid values are 0 to 1000.
354 ● x25 timer idle 3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer idle Purpose Use the x25 timer idle command to set the maximum idle time of the SVC on the interface. Use the undo x25 timer idle command to restore its default value. Syntax x25 timer idle minutes undo x25 timer idle Parameters minutes Example Set the maximum idle time of the SVC on the interface Serial 0/0/0 to 10 minutes. Maximum idle time of SVC in minutes. Valid values are 0 to 255.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer tx0 ● 355 x25 timer tx0 Purpose Use the x25 timer tx0 command to set the restart/retransmission timer delay for DTE (or DCE). Use the undo x25 timer tx0 command to restore their default values. Syntax x25 timer tx0 seconds undo x25 timer tx0 Parameters seconds Delay time for the X.25 restarting timer (in seconds). Valid values are 0 to 1000. By default, the delay on the X.
356 ● x25 timer tx1 3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer tx1 Purpose Use the x25 timer tx1 command to set calling request (indication) transmission timer delay for DTE (or DCE). Use the undo x25 timer tx1 command to restore its default value. Syntax x25 timer tx1 seconds undo x25 timer tx1 Parameters seconds Example Set the timer delay on the X.25 interface Serial0/0/0 to 100 seconds. Delay time of calling request (indication) transmission timer (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer tx2 ● 357 x25 timer tx2 Purpose Use the x25 timer tx2 command to set resetting request (indication) transmission timer delay for DTE (or DCE). Use the undo x25 timer tx2 command to restore its default value. Syntax x25 timer tx2 seconds undo x25 timer tx2 Parameters seconds Example Set the reset timer delay on the X.25 interface Serial0/0/0 to 120 seconds. Delay time of resetting request (indication) timer (in seconds).
358 ● x25 timer tx3 3Com Router 5000 Family and Router 6000 Family Command Reference x25 timer tx3 Purpose Use the x25 timer tx3 command to set clearing request (indication) transmission timer delay for DTE (or DCE). Use the undo x25 timer tx3 command to restore its default value. Syntax x25 timer tx3 seconds undo x25 timer tx3 Parameters seconds Example Set the delay time of clearing timer on the X.25 interface Serial0/0/0 to 100 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 vc-per-map ● 359 x25 vc-per-map Purpose Use the x25 vc-per-map command to set the maximum number of VCs for connections with the same destination device. Use the undo x25 vc-per-map command to restore their default values. Syntax x25 vc-per-map count undo x25 vc-per-map Parameters count Example Set the maximum value of VCs on the X.25 interface Serial 0/0/0 to 3. Maximum number of VCs. Valid values are 1 to 8.
360 ● x25 vc-range 3Com Router 5000 Family and Router 6000 Family Command Reference x25 vc-range Purpose Use the x25 vc-range command to set highest and lowest values of X.25 VC range. Use the undo x25 vc-range command to restore their default values. Syntax x25 vc-range { in-channel lic hic | bi-channel ltc htc | out-channel loc hoc } undo x25 vc-range Parameters lic hic Lowest and highest incoming-only channels of X.25 VC. Valid values are 0 to 4095.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 window-size ● 361 x25 window-size Purpose Use the x25 window-size command to set the sizes of input and output windows on the interface X.25. Use the undo x25 window-size command to restore their default values. Syntax x25 window-size input-window-size output-window-size undo x25 window-size Parameters Example input-window-size Size of input window. When X.25 window modulus is 8, valid values are 1 to 7. When X.
362 ● x25 window-size 3Com Router 5000 Family and Router 6000 Family Command Reference ■ x25 fr pvc ■ x25 receive-threshold
3Com Router 5000 Family and Router 6000 Family Command Reference x25 x121-address ● 363 x25 x121-address Purpose Use the x25 x121-address command to set the X.121 address of an X.25 interface. Use the undo x25 x121-address command to delete the address. Syntax x25 x121-address x.121-address undo x25 x121-address Parameters x.121-address Example Configure the link layer protocol on the interface Serial 0/0/0 as X.25, and X.121 address as 20112451. X.121 address of an interface.
364 ● x25 xot pvc 3Com Router 5000 Family and Router 6000 Family Command Reference x25 xot pvc Purpose Use the x25 xot pvc command to add a PVC route of XOT. Use the undo x25 pvc command to delete the specified PVC route of XOT. Syntax x25 xot pvc pvc-number1 ip-address interface type number pvc pvc-number2 [ xot-option ] [ packet-size input-packet output-packet window-size input-window-size output-window-size ] undo x25 pvc pvc-number1 Parameters pvc-number1 Number of PVC on the local interface.
3Com Router 5000 Family and Router 6000 Family Command Reference Example x25 xot pvc ● 365 Connect PVC1 on the interface Serial0/0/0(10.1.1.1) of Router RTA with PVC2 on the interface Serial1/0/0(10.1.1.2) of Router RTB via XOT tunnel, and then perform packet switching. Perform the configurations on the Router RTA. [3Com-Serial0/0/0] ip address 10.1.1.1 255.255.255.0 [3Com-Serial0/0/0] link-protocol x25 dce ietf [3Com-Serial0/0/0] x25 xot pvc 1 10.1.1.
366 ● x29 timer inviteclear-time 3Com Router 5000 Family and Router 6000 Family Command Reference x29 timer inviteclear-time Purpose Use the x29 timer inviteclear-time command to set the delay waiting for response after the PAD clear procedure is initiated. Upon expiration of this timer, the server aborts the connection by force and starts X.25 clear procedures. Use the undo x29 timer inviteclear-time command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 NETWORK PROTOCOL ALPHABETICAL LISTING OF COMMANDS accounting domain 6 apply default output-interface 8 apply ip-address default next-hop 9 apply ip-address next-hop (for Multicast Policy Routing) 10 apply ip-address next-hop (for Multicast Policy Routing) 11 apply ip-address next-hop (for Unicast Policy Routing) 12 apply ip-dscp 13 apply ip-precedence 14 apply output-interface (for Multicast Policy Routing) 15 apply output-interface (for
2● 3Com Router 5000 Family and Router 6000 Family Command Reference debugging qllc 54 debugging tcp event 55 debugging tcp md5 57 debugging tcp packet 58 debugging udp-helper 59 debugging udp packet 60 default entity modem compatible-param 61 default entity modem protocol 62 dhcp accounting domain (Interface view) 64 dhcp enable 65 dhcp relay information 66 dhcp relay information strategy 67 dhcp relay release 68 dhcp server accounting domain interface (System view) 69 dhcp server bims-server (Interface v
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server tree 123 display dhcprelay-security 125 display dns domain 126 display dns dynamic host 127 display dns server 128 display fib 129 display fib acl 130 display fib begin 131 display fib ip-prefix 132 display fib longer 133 display fib statistics 135 display icmp statistics 136 display ip count 138 display ip count rule 139 display ip fast-forwarding cache 140 display ip host 141 display ip interface 142 display ip interface
4● 3Com Router 5000 Family and Router 6000 Family Command Reference ip address ppp-negotiate 187 ip address unnumbered 188 ip count enable 189 ip count exterior threshold 190 ip count firewall denied 191 ip count inbound packets 192 ip count interior threshold 193 ip count rule 194 ip count outbound-packets 195 ip count timeout 196 ip host 197 ip local policy route-policy 198 ip multicast-fast-forwarding 199 ip multicast-policy route-policy 200 ip policy route-policy 201 ip relay address cycle 202 ip rela
3Com Router 5000 Family and Router 6000 Family Command Reference reset tcp statistics 243 reset udp statistics 244 route-policy 245 route-policy 247 sot counter keepalive 249 sot gather 250 sot group-set 251 sot peer 252 sot sdlc broadcast 253 sot sdlc controller 254 sot sdlc-status primary 255 sot sdlc-status secondary 256 sot send address 257 sot send all tcp 258 sot timer keepalive 259 static-bind ip-address 260 static-bind { mac address | client identifier } 261 synchronize arp 262 tcp timer syn-timeou
6 ● accounting domain 3Com Router 5000 Family and Router 6000 Family Command Reference accounting domain Purpose Use the accounting domain command to enable DHCP server accounting for addresses from the global DHCP address pools and configure a domain for DHCP accounting. Use the undo accounting domain command to disable DHCP accounting for addresses from the DHCP address pools.
3Com Router 5000 Family and Router 6000 Family Command Reference accounting domain ● 7 When configured with the undo accounting domain command, a DHCP server does not send any accounting stop request to the RADIUS server when releasing an existing lease. If you modify the RADIUS domain, the DHCP server will send accounting start and stop requests to the new RADIUS server for subsequent lease allocation and releasing events.
8 ● apply default output-interface 3Com Router 5000 Family and Router 6000 Family Command Reference apply default output-interface Purpose Use the apply default output-interface command to set default forwarding interface for packets. Use the undo apply default output-interface command to cancel the configuration of the default forwarding interface of packets.
3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-address default next-hop ● 9 apply ip-address default next-hop Purpose Use the apply ip-address default next-hop command to set the default next hop of a packet. Use the undo apply ip-address default next-hop command to cancel the configured default packet next hop.
10 ● apply ip-address next-hop (for Multicast Policy Routing) 3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-address next-hop (for Multicast Policy Routing) Purpose Use the apply ip-address command to configure the next hop IP address list in a route-node. Use the undo apply ip-address command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-address next-hop (for Multicast Policy Routing) ● 11 apply ip-address next-hop (for Multicast Policy Routing) Purpose Use the apply ip-address command to configure the next hop IP address list in a route-node. Use the undo apply ip-address command to remove the configuration.
12 ● apply ip-address next-hop (for Unicast Policy Routing) 3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-address next-hop (for Unicast Policy Routing) Purpose Use the apply ip-address next-hop command to set the packet next hop. Use the undo apply ip-address next-hop command to cancel the configuration about the next hop.
3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-dscp ● 13 apply ip-dscp Purpose Use the apply ip-dscp command to configure to modify the packet DSCP value matching the policy. Use the undo ip-dscp command to delete the configuration.
14 ● apply ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-precedence Purpose Use the apply ip-precedence command to set precedence of IP packets. Use the undo apply ip-precedence command to remove the precedence of IP packets. Syntax apply ip-precedence value undo apply ip-precedence Parameters Example value The preference value.
3Com Switch 5500 Family Command Reference apply output-interface (for Multicast Policy Routing) ● 15 apply output-interface (for Multicast Policy Routing) Purpose Use the apply output-interface command to configure an outgoing interface list in a route-node. Use the undo apply output-interface command to remove the configuration. Syntax apply output-interface acl acl-number undo apply output-interface [ acl acl-number ] Parameters acl-number Default By default, no apply clause is defined.
16 ● apply output-interface (for Multicast Policy Routing) 3Com Router 5000 Family and Router 6000 Family Command Reference apply output-interface (for Multicast Policy Routing) Purpose Use the apply output-interface command to configure an outgoing interface list in a route-node. Use the undo apply output-interface command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference apply output-interface (for Unicast Policy Routing) ● 17 apply output-interface (for Unicast Policy Routing) Purpose Use the apply output-interface command to set a packet forwarding interface. Use the undo apply output-interface command to cancel the configuration on a forwarding interface.
18 ● arp check enable 3Com Router 5000 Family and Router 6000 Family Command Reference arp check enable Purpose Use the arp check enable command to enable ARP entry check to have the device not learn the ARP entries with broadcast MAC addresses. Use the undo arp check enable command to disable ARP entry check to have the system learn the ARP entries with broadcast MAC addresses. Syntax arp check enable undo arp check enable Parameters None Default By default, ARP entry check is enabled.
3Com Router 5000 Family and Router 6000 Family Command Reference arp security ● 19 arp security Purpose Use the arp security command to disable dynamic ARP learning on an Ethernet interface. Use the undo arp security command to restore dynamic ARP learning on an Ethernet interface. Syntax arp security undo arp security Parameters None Default By default, dynamic ARP learning is enabled on an Ethernet interface. Example Disable dynamic ARP learning on Ethernet interface Ethernet1/0/0.
20 ● arp security time-out 3Com Router 5000 Family and Router 6000 Family Command Reference arp security time-out Purpose Use the arp security time-out command to configure the aging time of the authorized ARP entries. Use the undo arp security time-out command to restore the default aging time of the authorized ARP entries.
3Com Router 5000 Family and Router 6000 Family Command Reference arp send-gratuitous-arp ● 21 arp send-gratuitous-arp Purpose Use the arp send-gratuitous-arp command to enable sending gratuitous ARP packet on this interface periodically and set the sending period. Use the undo arp send-gratuitous-arp command to disable the function. Syntax arp send-gratuitous-arp seconds undo arp-gratuitous-arp Parameters seconds Default By default, the function is disabled.
22 ● arp static 3Com Router 5000 Family and Router 6000 Family Command Reference arp static Purpose Use the arp static command to configure ARP mapping table. Use the undo arp command to delete mapping items corresponding to some addresses in the ARP mapping table. Syntax arp static ip-address ethernet-address [ vpn-instance-name ] undo arp ip-address [ vpn-instance-name ] Parameters ip-address IP addresses of the ARP mapping entries in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference arp timer aging ● 23 arp timer aging Purpose Use the arp timer aging command to set the aging timer for dynamic ARP entries. Use the undo arp timer aging command to restore the default. Syntax arp timer aging minutes undo arp timer aging Parameters minutes Example Set the aging timer for dynamic ARP entries to 30 minutes. Sets the aging timer for dynamic ARP entries. Valid values are 1 to 1440 minutes.
24 ● bims-server 3Com Router 5000 Family and Router 6000 Family Command Reference bims-server Purpose Use the bims-server command to enable and configure BIMS option for a global address pool on the DHCP server. Use the undo bims-server command to disable BIMS option for a global address pool on the DHCP server. Syntax bims-server ip ip-address [ port port-number ] sharekey key undo bims-server Parameters ip ip-address IP address of the BIMS server.
3Com Router 5000 Family and Router 6000 Family Command Reference connection-limit default ● 25 connection-limit default Purpose Use the connection-limit default command to configure the action when the limit policy is not available. Use the undo connection-limit default command to delete the action. Syntax connection-limit default { permit | deny } undo connection-limit default { permit | deny } Parameters Example permit Performs limit, with the upper limit and lower limit being the default value.
26 ● connection-limit default amount 3Com Router 5000 Family and Router 6000 Family Command Reference connection-limit default amount Purpose Use the connection-limit default amount command to set default threshold for connection limit. Use the undo connection-limit default amount command to delete the threshold.
3Com Router 5000 Family and Router 6000 Family Command Reference connection-limit enable ● 27 connection-limit enable Purpose Use the connection-limit enable command to enable the connection limit function. Use the undo connection-limit enable command to disable the function. Syntax connection-limit enable undo connection-limit enable Parameters None. Default By default, the function is disabled. Example Enable connection limit function.
28 ● connection-limit policy 3Com Router 5000 Family and Router 6000 Family Command Reference connection-limit policy Purpose Use the connection-limit policy command to create connection limit policy and enter its view. Use the undo connection-limit policy command to delete the policy. Syntax connection-limit policy policy-number undo connection-limit policy { policy-number | all } Parameters Example policy-number Number of connection limit policy. Valid values are 0 to 19.
3Com Router 5000 Family and Router 6000 Family Command Reference dchp select (Interface view) ● 29 dchp select (Interface view) Purpose Use the dhcp select command in Interface view to select a method for disposing the DHCP packets destined to the local device. Use the undo dhcp select command in Interface view to restore the default setting.
30 ● dchp select (Interface view) Description Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference Currently, DHCP is available only on the following interfaces: ■ Ethernet interface or subinterface ■ Virtual Ethernet interface ■ Synchronous/asynchronous serial interface encapsulated with PPP, HDLC, or frame relay ■ E1 interface dchp select (System view)
3Com Router 5000 Family and Router 6000 Family Command Reference dchp select (System view) ● 31 dchp select (System view) Purpose Use the dhcp select command in System view to select a method for multiple interfaces in a specified range to dispose the DHCP packets destined to the local device. Use the undo dhcp select command in System view to restore the default setting.
32 ● dchp select (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference Default By default, DHCP packets destined to the local device will be sent to the internal server and the clients sending them will be allocated with addresses selected from a global address pool (in global approach). Example Configure the interfaces in the range of Ethernet2/0/0.1 to Ethernet2/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference ddns domainname ● 33 ddns domainname Purpose Use the ddns domainname command to configure a domain name whose domain name-to-IP address mapping on DNS needs update by using the service of the DDNS service provider. Use the undo ddns domainname to delete the configured domain name. Syntax ddns domainname name undo ddns domainname Parameters name Default By default, no domain name is configured. Example Configure domain name www.3Com.
34 ● ddns password 3Com Router 5000 Family and Router 6000 Family Command Reference ddns password Purpose Use the ddns password command to configure a password for accessing the DDNS service provider. Use the undo ddns password command to delete the password used for accessing the DDNS service provider. Syntax ddns password password undo ddns password Parameters password Default By default, no password is configured for accessing the DDNS service provider.
3Com Router 5000 Family and Router 6000 Family Command Reference ddns refresh ● 35 ddns refresh Purpose Use the ddns refresh command to request the DDNS service provider to notify the DNS server that the bound IP address of the domain name specified by the ddns domainname command has changed. Syntax ddns refresh Parameters None Example Request DDNS service provider 3322.org to notify the DNS server that the bound IP address of the domain name specified by the ddns domainname command has changed.
36 ● ddns server 3Com Router 5000 Family and Router 6000 Family Command Reference ddns server Purpose Use the ddns-server command to specify a DDNS service provider and enter its view. At present, only 3322.org is available. Use the undo ddns-server command to delete the configured DDNS service provider. Syntax ddns-server 3322.org undo ddns-server Parameters 3322.org Default By default, no DDNS service provider is configured. Example Set the DDNS service provider to 3322.org.
3Com Router 5000 Family and Router 6000 Family Command Reference ddns source interface ● 37 ddns source interface Purpose Use the ddns source-interface command to configure the interface used for accessing the DDNS service provider. Use the undo ddns source-interface to delete the interface used for accessing the DDNS service provider.
38 ● ddns username 3Com Router 5000 Family and Router 6000 Family Command Reference ddns username Purpose Use the ddns username command to configure a user name for accessing the DDNS service provider. Use the undo ddns username command to delete the user name used for accessing the DDNS service provider. Syntax ddns username name undo ddns username Parameters name Default By default, no user name is specified for accessing the DDNS service provider.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging arp packet ● 39 debugging arp packet Purpose Use the debugging arp packet command to enable ARP packets debugging. Use the undo debugging arp packet command to disable the function. Syntax debugging arp packet undo debugging arp packet Parameters None Example Enable ARP packets debugging.
40 ● debugging connection-limit 3Com Router 5000 Family and Router 6000 Family Command Reference debugging connection-limit Purpose Use the debugging connection-limit command to enable connection limit debugging. Use the undo debugging connection-limit command to disable the debugging. Syntax debugging connection-limit undo debugging connection-limit Parameters None. Default By default, the debugging function is disabled. Example Enable connection limit debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dhcp client ● 41 debugging dhcp client Purpose Use the debugging dhcp client command to enable debugging on the DHCP client. Use the undo debugging dhcp client command to disable debugging on the DHCP client. By default, DHCP client debugging is disabled.
42 ● debugging dhcp relay 3Com Router 5000 Family and Router 6000 Family Command Reference debugging dhcp relay Purpose Use the debugging dhcp relay command to enable debugging on the DHCP-relay module. Use the undo debugging dhcp relay command to disable DHCP-relay module debugging. Syntax debugging dhcp relay { all | error | event | packet [ client mac mac-address ] } undo debugging dhcp relay { all | error | event | packet } Parameters Example all All DHCP-relay debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dhcp server ● 43 debugging dhcp server Purpose Use the debugging dhcp server command to enable debugging on the DHCP server. Use the undo debugging dhcp server command to disable debugging. Syntax debugging dhcp server { all | error | events | packets } undo debugging dhcp server { all | error | events | packets } Parameters all All debugging functions of DHCP server.
44 ● debugging dhcp server 3Com Router 5000 Family and Router 6000 Family Command Reference *0.62082733-DHCP SER-8-DHCPS_DEBUG_COMMON: DhcpServer: Sending ICMP ECHO to Target IP: 5.5.5.2 *0.62083233-DHCP SER-8-DHCPS_DEBUG_COMMON: DhcpServer: Send DHCPOFFER to MAC=> 00.05.5D.85.D5.45. Offer IP=> 5.5.5.2 *0.62083366-DHCP SER-8-DHCPS_DEBUG_COMMON: DhcpServer: receive DHCPREQUEST from 00.05.5D.85.D5.45. *0.62083483-DHCP SER-8-DHCPS_DEBUG_COMMON: DhcpServer: Send DHCPACK to MAC=> 00.05.5D.85.D5.45.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dns ● 45 debugging dns Purpose Use the debugging dns command to enable DNS client debugging. Use the undo debugging dns command to disable DNS client debugging. Syntax debugging dns undo debugging dns Parameters None Default By default, DNS client debugging is disabled. Example Enable DNS client debugging. debugging dns Disable DNS client debugging.
46 ● debugging ip 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip Purpose Using debugging ip icmp command to enable the ICMP debugging. Use the undo debugging ip icmp command to disable the ICMP debugging. The debugging ip packet command is used to enable the IP packet debugging. The filtration to the debugging information can be accomplished by filtering the IP packets via acl. Use the undo debugging ip packet command to disable the IP packet debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ User view debugging ip ● 47
48 ● debugging ip count 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip count Purpose Use the debugging ip count command to enable debugging for the IP Accounting module (the IP Accounting). Use the undo debugging ip count command to disable debugging for the IP Accounting. Syntax debugging ip count { data | error | all } undo debugging ip count { data | error | all } Parameters data Enables data procedure debugging. error Enables error debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference Description debugging ip count ● 49 Table 1 Description on the fields of the debugging ip count data command Field Description IPA_In: Begin processing of inbound-packet. IPA is enabled on the router. An IP packet arrived at the router. Protocol:1 Direction: 10.153.72.1 --> 10.153.72.150 From:Ethernet0/0/0 IPA is enabled on the router. An IP packet arrived at the router. Dealing with the inbound-packet permitted by the firewall.
50 ● debugging ip count 3Com Router 5000 Family and Router 6000 Family Command Reference Table 2 Description on the fields of the debugging ip count error command table head table head Failed to allocate memory Memory allocation failed. Null parameter inputted Delete a null protocol entry. while clearing protocol hash list. Error: Deleting address node failed because of giving a NULL pointer! The system failed to delete an address node because of a null pointer.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip multicast-policy ● 51 debugging ip multicast-policy Purpose Use the debugging ip multicast-policy command to enable the debugging of IP multicast policy routing. Use the undo debugging ip multicast-policy command to disable the debugging of multicast policy routing.
52 ● debugging ip urpf 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ip urpf Purpose Use the debugging ip urpf command to display the information on the rejected packets by URPF. Use the undo debugging ip urpf command to disable the function. Syntax debugging ip urpf discards [ interface interface-type interface-number ] undo debugging ip urpf discards [ interface interface-type interface-number ] Parameters Example interface-type interface-number Interface name.
54 ● debugging qllc 3Com Router 5000 Family and Router 6000 Family Command Reference debugging qllc Purpose Use the debugging qllc command to enable QLLC debugging. Use the undo debugging qllc command to disable QLLC debugging. Syntax debugging qllc { all | packet | event } undo debugging qllc { all | packet | event } Parameters Example all Enables all QLLC information debugging. packet Enables QLLC packet debugging. event Enables QLLC negotiation process debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging tcp event ● 55 debugging tcp event Purpose Use the debugging tcp event command to enable TCP events debugging. Use the undo debugging tcp event command to disable TCP events debugging. Syntax debugging tcp event [ task_id socket_id ] undo debugging tcp event [ task_id socket_id ] Parameters Example task_id The ID of a task. socket_id The ID of a socket. Enable debugging of TCP events. <3Com> debugging tcp event *0.
56 ● debugging tcp event View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description User view There is limitation for the number of debugging switches enabled, that is, only a fixed number of debugging switches can be enabled at one time (combination of task ID and socket ID).
3Com Router 5000 Family and Router 6000 Family Command Reference debugging tcp md5 ● 57 debugging tcp md5 Purpose Use the debugging tcp md5 command to enable the MD5 authentication debugging of the TCP connection. Use the undo debugging tcp md5 command to disable the MD5 authentication debugging of the TCP connection. Syntax debugging tcp md5 undo debugging tcp md5 Parameters None Example Enable the MD5 authentication debugging of the TCP connection.
58 ● debugging tcp packet 3Com Router 5000 Family and Router 6000 Family Command Reference debugging tcp packet Purpose Use the debugging tcp packet command to enable the debugging of TCP connection. The number of debugging switches users can enable is limited, that is, at the same time only a fixed number of debugging switches can be enabled (combination of task ID and socket ID). Use the undo debugging tcp packet command to disable the debugging of TCP connection.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging udp-helper ● 59 debugging udp-helper Purpose Use the debugging udp-helper command to enable UDP Helper debugging. Use the undo debugging udp-helper command to disable UDP Helper debugging. Syntax debugging udp-helper { event | packet [ receive | send ] } undo debugging udp-helper { event | packet [ receive | send ] } Parameters event UDP Helper event debugging. packet UDP Helper packet debugging.
60 ● debugging udp packet 3Com Router 5000 Family and Router 6000 Family Command Reference debugging udp packet Purpose Use the debugging udp packet command to enable the debugging of UDP connection. Use the undo debugging udp packet command to disable the debugging of UDP connection. Syntax debugging udp packet [ task_id socket_id ] undo debugging udp packet [ task_id socket_id ] Parameters Example task_id The ID of a task. socket_id The ID of a socket. Enable the debugging of UDP connection.
3Com Router 5000 Family and Router 6000 Family Command Reference default entity modem compatible-param ● 61 default entity modem compatible-param Purpose Use the default entity modem compatible-param command in the case that you fail to use standard Modem PCM to interoperate with devices from other vendors. Use the undo default entity modem compatible-param command to restore the voice entity Modem compatible parameter globally to the default.
62 ● default entity modem protocol 3Com Router 5000 Family and Router 6000 Family Command Reference default entity modem protocol Purpose Use the default entity modem protocol none command to globally disable Modem function of voice entity. Use the default entity modem protocol pcm command to globally configure PCM Modem protocol type of voice entity, including coding/decoding and Modem negotiation mode. Use the undo default entity modem protocol command to restore the Modem protocol to default value.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Voice Dial Program view default entity modem protocol ● 63
64 ● dhcp accounting domain (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp accounting domain (Interface view) Purpose Use the dhcp server accounting domain command to enable DHCP accounting for addresses from the interface address pool and configure a domain for DHCP accounting. Use the undo dhcp server accounting domain command to disable DHCP accounting for addresses from the interface address pool.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp enable ● 65 dhcp enable Purpose Use the dhcp enable command to enable DHCP. Use the undo dhcp enable command to disable DHCP. Syntax dhcp enable undo dhcp enable Parameters None Default By default, DHCP is enabled. Example Enable DHCP on the current router. [3Com] dhcp enable View This command can be used in the following views: ■ Description System view Before you can configure DHCP, you must enable DHCP.
66 ● dhcp relay information 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp relay information Purpose Use the dhcp relay information enable command to enable the DHCP relay to support option 82 globally. Use the undo dhcp relay information enable command to disable the DHCP relay to support option 82. Syntax dhcp relay information enable undo dhcp relay information enable Parameters None Default By default, DHCP relay is disabled to support option 82.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp relay information strategy ● 67 dhcp relay information strategy Purpose Use the dhcp relay information strategy command to configure a strategy for handling packets with option 82 on the DHCP relay. Use the undo dhcp relay information strategy command to restore the default strategy for handling packets with option 82.
68 ● dhcp relay release 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp relay release Purpose Use the dhcp relay release command to send an IP address releasing request to a DHCP server via the DHCP relay. Syntax dhcp relay release { client-ip mac-address } [ server-ip ] Parameters client-ip IP address of the DHCP client. mac-address MAC address of the DHCP client, which is in the format of H-H-H. server-ip IP address of the DHCP server.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server accounting domain interface (System view) ● 69 dhcp server accounting domain interface (System view) Purpose Use the dhcp server accounting domain interface command to enable DHCP accounting for addresses from the address pools of the specified interfaces and configure a domain for DHCP accounting.
70 ● dhcp server accounting domain interface (System view) Related Command accounting domain 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server bims-server (Interface view) ● 71 dhcp server bims-server (Interface view) Purpose Use the dhcp server bims-server command to enable and configure BIMS option support on the current interface. Use the undo dhcp server bims-server command to disable BIMS option support on the current interface.
72 ● dhcp server bims-server interface (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server bims-server interface (System view) Purpose Use the dhcp server bims-server interface command to enable and configure BIMS option support for an interface or all interfaces configured with interface address pools. Use the undo dhcp server bims-server command to disable BIMS option support for an interface or all interfaces configured with interface address pools.
3Com Router 5000 Family and Router 6000 Family Command Reference Description dhcp server bims-server interface (System view) ● 73 After you configure BIMS option support on the DHCP server, the DHCP server encapsulates the BIMS option information in the DHCP_OFFER and DHCP_ACK packets sent to the DHCP clients according to these rules: ■ If you configure BIMS option support for an interface, the DHCP server sends the BIMS option information together with the lease when assigning an IP address from the in
74 ● dhcp server detect 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server detect Purpose Use the dhcp server detect command to enable pseudo-DHCP-server detection. Use the undo dhcp server detect command to disable the function. Syntax dhcp server detect undo dhcp server detect Parameters None Default By default, pseudo-DHCP-server detection is disabled. Example Enable pseudo DHCP server detection.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server dns-list ● 75 dhcp server dns-list Purpose Use the dhcp server dns-list command in interface view to configure DNS IP addresses for an interface configured with a DHCP address pool. Use the undo dns-list command in interface view to delete the configuration.
76 ● dhcp server dns-list interface (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server dns-list interface (System view) Purpose Use the dhcp server dns-list interface command to assign DNS IP addresses to the DHCP address pool of multiple interfaces in a specified range. Use the undo server dns-list interface command in system view to delete the allocated IP addresses.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ dhcp server dns-list ■ dhcp server ip-pool ■ dns-list dhcp server dns-list interface (System view) ● 77
78 ● dhcp server domain-name (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server domain-name (Interface view) Purpose Use the dhcp server domain-name command in interface view to configure the domain name that the DHCP address pool of the current interface allocates to clients. Use the undo dhcp server domain-name command in interface view to delete the configured domain name.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server domain-name interface (System view) ● 79 dhcp server domain-name interface (System view) Purpose Use the dhcp server domain-name interface command in system view to configure the domain name that the DHCP address pool of the interfaces in a specified range allocates to DHCP clients. Use the undo dhcp server domain-name interface command in system view to delete the configured domain name.
80 ● dhcp server domain-name interface (System view) Related Command dhcp server ip-pool 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server expired (Interface view) ● 81 dhcp server expired (Interface view) Purpose Use the dhcp server expired command in interface view to configure a valid period allowed for leasing IP addresses in the current interface DHCP address pool. Use the undo dhcp server expired command in interface view to restore the default setting.
82 ● dhcp server forbidden-ip 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server forbidden-ip Purpose Use the dhcp server forbidden-ip command to exclude IP addresses in a specified range to participate in the auto-allocation. Use the undo dhcp server forbidden-ip command to delete the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server interface (System view) ● 83 dhcp server interface (System view) Purpose Use the dhcp server expired interface command in system view to configure a valid period allowed for leasing IP addresses in the interface DHCP address pool of the interfaces in a specified range. Use the undo dhcp server expired interface command in system view to restore the default setting.
84 ● dhcp server interface (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference After configuring this command, you cannot view the configuration by executing the display current-configuration command. By calling the dhcp server expired command respectively on the specified interfaces, you can fulfill the batch configurations of the command.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server ip-pool ● 85 dhcp server ip-pool Purpose Use the dhcp server ip-pool command to create a DHCP address pool and access the DHCP address pool view. Use the undo dhcp server ip-pool command to delete the specified address pool. Syntax dhcp server ip-pool pool-name undo dhcp server ip-pool pool-name Parameters pool-name Default By default, no DHCP address pool is created. Example Create DHCP address pool 0.
86 ● dhcp server nbns-list (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server nbns-list (Interface view) Purpose Use the dhcp server nbns-list command in interface view to configure NetBIOS server addresses in the DHCP address pool of current interface. Use the undo dns-list command in interface view to delete the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server nbns-list interface (System view) ● 87 dhcp server nbns-list interface (System view) Purpose Use the dhcp server nbns-list interface command in system view to configure NetBIOS server addresses for the clients that get ip address from the DHCP address pool of the interfaces in a specified range. Use the undo dhcp server nbns-list interface command in system view to delete the configuration.
88 ● dhcp server nbns-list interface (System view) Description 3Com Router 5000 Family and Router 6000 Family Command Reference By far, only up to eight NetBIOS addresses can be configured in each DHCP address pool. After configuring this command, you cannot view the configuration by executing the display current-configuration command. By calling the dhcp server nbns-list command respectively on the specified interfaces, you can fulfill the batch configurations of the command.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server netbios-type (Interface view) ● 89 dhcp server netbios-type (Interface view) Purpose Use the dhcp server netbios-type command in interface view to configure the NetBIOS node type of the DHCP clients of the current interface. Use the undo dhcp server netbios-type command in interface view to restore the default setting.
90 ● dhcp server netbios-type interface (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server netbios-type interface (System view) Purpose Use the dhcp server netbios-type interface command in system view to configure a NetBIOS node type for the DHCP clients of the interfaces in a specified range. Use the undo dhcp server netbios-type interface command in system view to restore the default setting.
3Com Router 5000 Family and Router 6000 Family Command Reference Description dhcp server netbios-type interface (System view) ● 91 Hostname-IP maps are required in the event that DHCP clients use the NetBIOS protocol on a WAN. After configuring this command, you cannot view the configuration by executing the display current-configuration command. By calling dhcp server netbios-type respectively on the specified interfaces, you can fulfill the batch configurations of the command.
92 ● dhcp server option (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server option (Interface view) Purpose Use the dhcp server option command in interface view to configure a DHCP self-defined option for the DHCP address pool of the current interface. Use the undo dhcp server option command in interface view to delete the configuration.
94 ● dhcp server option interface (System view) Description Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference After you configure this command, you cannot view the configuration by executing the display current-configuration command. By calling the dhcp server option cyclically, you can fulfill the batch configurations of the command.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server ping ● 95 dhcp server ping Purpose Use the dhcp server ping command to configure the maximum number of ping packets that the DHCP server is allowed to send and the longest time period that the DHCP server should wait for the response to each ping packet. Use the undo dhcp server ping command to restore the default settings.
96 ● dhcp server relay information enable 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server relay information enable Purpose Use the dhcp server relay information enable command to enable the DHCP server to support option 82. Use the undo dhcp server relay information enable command to disable the DHCP server to support option 82.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server static-bind ● 97 dhcp server static-bind Purpose Use the dhcp server static-bind command to configure a static address binding in the DHCP address pool of the current interface. Use the undo dhcp server static-bind command to delete the configuration.
98 ● dhcp server synchronize arp (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server synchronize arp (Interface view) Purpose Use the dhcp server synchronize arp command to enable authorized ARP for a DHCP interface address pool. Use the undo dhcp server synchronize arp command to disable authorized ARP for a DHCP interface address pool.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server synchronize arp interface (System view) ● 99 dhcp server synchronize arp interface (System view) Purpose Use the dhcp server synchronize arp interface command to enable authorized ARP for specified DHCP interface address pools. Use the undo dhcp server domain-name interface command to disable authorized ARP for specified DHCP interface address pools.
100 ● dhcp server synchronize arp interface (System view) Related Command dhcp server ip-pool 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server voice-config (Interface view) ● 101 dhcp server voice-config (Interface view) Purpose Use the dhcp server voice-config command to enable the DHCP server to send option 184 and suboptions of 184 when it assigns addresses from the current interface address pool.
102 ● dhcp server voice-config (Interface view) View This command can be used in the following views: ■ Description 3Com Router 5000 Family and Router 6000 Family Command Reference Interface view The DHCP server sends option 184 and suboptions of 184 only when thus required by the DHCP client. Configure the NCP-IP suboption before configuring other suboptions; otherwise, they cannot take effect.
3Com Router 5000 Family and Router 6000 Family Command Reference dhcp server voice-config interface (System view) ● 103 dhcp server voice-config interface (System view) Purpose Use the dhcp server voice-config interface command to enable the DHCP server to send option 184 and suboptions of 184 when it assigns addresses from the specified interface address pool.
104 ● dhcp server voice-config interface (System view) Example Enable the DHCP server to send option 184 and its suboptions when assigning addresses from interface Ethernet 0/0/1, setting IP address of NCP to 1.1.1.1, IP address of the alternate NCP server to 2.2.2.2, state of voice VLAN to enable, ID of voice VLAN to 1, IP address for failover call routing to 3.3.3.3, and dial string for failover call routing to 99*.
3Com Router 5000 Family and Router 6000 Family Command Reference display arp ● 105 display arp Purpose Use the display arp command to view the ARP mapping table. Syntax display arp [ static | dynamic | all | | { begin text | exclude text | include text } ] Parameters static Indicates to show the static ARP entries. dynamic Indicates to show the dynamic ARP entries. all Indicates to show all ARP entries. | Outputs the matched entries.
106 ● display arp Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ arp static ■ reset arp
3Com Router 5000 Family and Router 6000 Family Command Reference display arp timer aging ● 107 display arp timer aging Purpose Use the display arp timer aging command to display the aging timer for dynamic ARP entries. Syntax display arp timer aging Parameters None Example Display the aging timer for dynamic ARP entries.
108 ● display bootp client 3Com Router 5000 Family and Router 6000 Family Command Reference display bootp client Purpose Use the display bootp client command to display information about the BOOTP client, such as MAC address and IP address. Syntax display bootp client [ interface interface-type interface-number ] Parameters interface interface-type interface-number Specifies an interface by its type and number. Example Display information about the BOOTP client.
3Com Router 5000 Family and Router 6000 Family Command Reference display connection-limit policy ● 109 display connection-limit policy Purpose Use the display connection-limit policy command to display connection limit policy. Syntax display connection-limit policy { policy-number | all } Parameters policy-number Policy number to be displayed. Valid values are 0 to 255. all Displays all policies. Example Display the policy 1.
110 ● display connection-limit statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display connection-limit statistics Purpose Use the display connection-limit statistics command to display the connection limit statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference Example display connection-limit statistics ● 111 Display all connection limit statistics. <3Com> system-view [3Com] display connection-limit statistics View This command can be used in the following views: ■ Description Any view Users can view the desired connection limit statistics flexibly by executing this command. Statistics of all connections will be displayed when no other parameters are followed with this command.
112 ● display dhcp client 3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp client Purpose Use the display dhcp client command to display the statistic information of the DHCP client. Executing the command attached without the keyword parameter verbose will display only the brief address allocation information on the DHCP client. Syntax display dhcp client [ verbose ] Parameters verbose Example Display the statistic details of the DHCP client.
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp client ● 113 Alloced IP: 169.254.0.2 255.255.0.0 Alloced lease: 300 seconds, T1: 150 seconds, T2: 262 seconds Lease from 2002.09.15 07:11:55 to 2002.09.15 07:16:55 Server IP: 169.254.0.1 Transaction ID = 0x3d8432b1 Client ID: HUAWEI-00e0.fc0a.c3ef-Ethernet0/0 Next timeout will happen after 0 days 0 hours 1 minutes 36 seconds.
114 ● display dhcp relay address 3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp relay address Purpose Use the display dhcp relay address command to view the DHCP relay address configuration of an interface. Syntax display dhcp relay address [ interface all ] Parameters interface-type interface-num Specifies an interface by its type and number. all All the interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp relay statistics ● 115 display dhcp relay statistics Purpose Use the display dhcp relay statistics command to view the statistics of DHCP relay in packet errors, DHCP packets received from clients, DHCP packets received from and sent to servers, and DHCP packets sent to clients (including unicast and broadcast packets). Syntax display dhcp relay statistics Parameters None Example View DHCP relay statistics.
116 ● display dhcp server conflict 3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server conflict Purpose Use the display dhcp server conflict command to view the DHCP address conflict statistics, including the information in conflicted IP address, conflict detection type, and conflict time. Syntax display dhcp server conflict { ip ip-address | all } Parameters ip-address A specified IP address. all All the IP addresses.
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server expired ● 117 display dhcp server expired Purpose Use the display dhcp server expired command to view the expired address leases in a DHCP address pool. In certain conditions, the addresses of the expired leases will be allocated to other DHCP clients.
118 ● display dhcp server free-ip 3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server free-ip Purpose Use the display dhcp server free-ip command to view the free address ranges in DHCP address pools, that is, information about IP addresses that have not been allocated yet. Syntax display dhcp server free-ip Parameters None Example Display the free address ranges in DHCP address pools. <3Com> display dhcp server free-ip IP Range from 1.0.0.0 to IP Range from 2.2.2.
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server ip-in-use ● 119 display dhcp server ip-in-use Purpose Use the display dhcp server ip-in-use command to view the address binding information of DHCP clients, such as the information in hardware address, IP address, and address lease expiration. Syntax display dhcp server ip-in-use { all | ip ip-address | pool [ pool-name ] | interface [ interface-type interface-number ] } Parameters all Displays all the information.
120 ● display dhcp server ip-in-use 3Com Router 5000 Family and Router 6000 Family Command Reference Table 7 Description on the fields of the display dhcp server ip-in-use command View Field Description Global pool Address binding information of global address pools Interface pool Address binding information of interface address pools IP address The bound IP address Client identifier/Hardware address The bound MAC address or VLAN ID VlanId Identifies a user uniquely together with a MAC addres
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server statistics ● 121 display dhcp server statistics Purpose Use the display dhcp server statistics command to view the statistics on the DHCP server, including such information as number of DHCP address pools, automatically or manually bound address and expired addresses, number of unknown packets, number of DHCP request packets, and number of response packets.
122 ● display dhcp server statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Table 8 Description of the information output by executing display dhcp server statistics Major item Description Global Pool: Statistics of global address pools Interface Pool: Statistics of interface address pools Pool Number Number of address pools Auto Number of automatically bound IP addresses Manual Number of manually bound IP addresses Expire Number of IP addresses of expired leases Bo
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcp server tree ● 123 display dhcp server tree Purpose Use the display dhcp server tree command to view the tree-structure information of DHCP address pools, including the address pool at each node, option, address lease period, and DNS server information.
124 ● display dhcp server tree 3Com Router 5000 Family and Router 6000 Family Command Reference Parent node:8 option 1 ip-address 255.0.0.0 gateway-list 2.2.2.2 dns-list 1.1.1.1 domain-name 444444 nbns-list 3.3.3.3 netbios-type m-node expired 2 0 0 option 58 hex 00 01 51 80 option 59 hex 00 00 00 3C Interface pool: Pool name: Ethernet11/2/0 network 5.5.5.0 mask 255.255.255.0 option 1 ip-address 255.255.255.0 gateway-list 5.5.5.
3Com Router 5000 Family and Router 6000 Family Command Reference display dhcprelay-security ● 125 display dhcprelay-security Purpose Use the display dhcprelay-security command to display the IP-to-MAC mappings of the clients obtaining IP addresses dynamically through the DHCP relay. Syntax display dhcprelay-security Parameters None Example Display the IP-to-MAC mappings of the clients obtaining IP addresses dynamically through the DHCP relay.
126 ● display dns domain 3Com Router 5000 Family and Router 6000 Family Command Reference display dns domain Purpose Use the display dns domain command to view the DNS domain names that are manually configured. Use the display dns domain dynamic command to view the DNS domain names that are dynamically obtained through DHCP or other protocols. Syntax display dns domain [dynamic] Parameters dynamic Example Display the DNS domain names that are manually configured.
3Com Router 5000 Family and Router 6000 Family Command Reference display dns dynamic host ● 127 display dns dynamic host Purpose Use the display dns dynamic-host command to view the current contents in the domain name cache of the DNS client. Syntax display dns dynamic-host Parameters None Example Display the current contents in the domain name cache of the DNS client. [Router]display dns dynamic-host No Host --> Ipaddress 1 www.sohu.com 91.1.1.1 2 www.sina.com.cn 87.1.1.1 No Host 1 www.163.
128 ● display dns server 3Com Router 5000 Family and Router 6000 Family Command Reference display dns server Purpose Use the display dns server command to view the DNS server addresses manually configured. Use the display dns server dynamic command to view the DNS server addresses that are dynamically obtained through DHCP or other protocols. Syntax display dns server [ dynamic ] Parameters dynamic Example Display the DNS server addresses that are dynamically obtained.
3Com Router 5000 Family and Router 6000 Family Command Reference display fib ● 129 display fib Purpose Use the display fib command to view the summary of the Forwarding Information Base. Syntax display fib Parameters None Example Display the summary of the forwarding information base. <3Com> display fib Flag: U: Usable G:Gateway H:Host B:Blackhole S:Static R:Reject E:Equal cost multi-path L:Generated Destination/Mask Nexthop Flag TimeStamp 196.1.1.0/24 220.1.1.2 GU t[418913] 195.1.1.0/24 220.1.1.
130 ● display fib acl 3Com Router 5000 Family and Router 6000 Family Command Reference display fib acl Purpose Use the display fib acl command to filter and display FIB information. Syntax display fib acl number Parameters number Example Display the FIB table entries matched by the ACL. The ACL rules expressed in number. Valid values are 2000 to 2999. <3Com> display fib acl 2000 Route entry matched by access-list 2000: Summary counts: 1 Destination/MaskNexthop FlagTimeStamp Interface 127.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display fib begin ● 131 display fib begin Purpose Use the display fib command to output the lines related to the line containing the character string text in the buffer according to the regular expression. Use the display fib | begin text command to view the lines beginning from the line containing the character string text to the end line of the buffer.
132 ● display fib ip-prefix 3Com Router 5000 Family and Router 6000 Family Command Reference display fib ip-prefix Purpose Use the display fib ip-prefix command to filter and display FIB information by prefix-list name in certain format. Syntax display fib Parameters listname Example Display the FIB table entries matched by the prefix list abc0. ip-prefix listname The name of the prefix list.
3Com Router 5000 Family and Router 6000 Family Command Reference display fib longer ● 133 display fib longer Purpose display fib dest-addr1 [ dest-mask2 ] [ longer ] Use this command to display the FIB table entries matching the destination address. Different parameters selected leads to different matching methods.
134 ● display fib longer Description 3Com Router 5000 Family and Router 6000 Family Command Reference Different parameters selected leads to different matching methods. display fib dest-addr: According to the destination address, if FIB table entries can be found within the range of natural mask, all the subnets will be displayed. Otherwise, only the FIB table entries found by operating the longest match will be displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display fib statistics ● 135 display fib statistics Purpose Use the display fib statistics command to display the total numbers of FIB table entries. Syntax display fib statistics Parameters None Example Display the total numbers of FIB table entries.
136 ● display icmp statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display icmp statistics Purpose Use the display icmp statistics command to view statistics about ICMP messages. Syntax display icmp statistics Parameters None Example Display statistics about ICMP messages.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command display interface display icmp statistics ● 137
138 ● display ip count 3Com Router 5000 Family and Router 6000 Family Command Reference display ip count Purpose Use the display ip count command to display IP packet statistics gathered by the IP Accounting. Syntax display ip count { inbound-packets | outbound-packets } { interior | exterior | firewall-denied } Parameters inbound-packets Displays information about inbound IP packets. outbound-packets Displays information about outbound IP packets.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip count rule ● 139 display ip count rule Purpose Use the display ip count rule command to display IP accounting rules. Syntax display ip count rule Parameters None Example Display IP accounting rules. [3Com] display ip count rule IP Count rule list: IP address address mask 192.168.0.0 255.255.255.0 1.0.0.0 255.0.0.
140 ● display ip fast-forwarding cache 3Com Router 5000 Family and Router 6000 Family Command Reference display ip fast-forwarding cache Purpose Use the display ip fast-forwarding cache command to view information on the unicast fast forwarding table. Syntax display ip fast-forwarding cache Parameters None Example Display the information of the unicast fast forwarding table.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip host ● 141 display ip host Purpose Use the display ip host command to display all the host names and their corresponding IP addresses. Syntax display ip host Parameters None Example Display all the host names and their corresponding IP addresses. <3Com> display ip host Host Age eth 0 3Com 0 Flags Address static 6.1.1.1 static 1.1.1.
142 ● display ip interface 3Com Router 5000 Family and Router 6000 Family Command Reference display ip interface Purpose Use the display ip interface command to view IP-related information about the specified or all interfaces. Syntax display ip interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Default By default, if no interface is specified, the IP-related information about all interfaces is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference Description The information is helpful for troubleshooting.
144 ● display ip interface brief 3Com Router 5000 Family and Router 6000 Family Command Reference display ip interface brief Purpose Use the display ip interface brief command to view IP-related summary about the specified or all interfaces. Syntax display ip interface brief [ interface-type [interface-number] ] Parameters interface-type Interface type. interface-number Interface number. Default By default, if no interface is specified, the IP-related summary about all interfaces is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip multicast-fast-forwarding cache ● 145 display ip multicast-fast-forwarding cache Purpose Use the display ip multicast-fast-forwarding cache command to display summary information about the fast forwarding table entries in the multicast fast forwarding cache.
146 ● display ip multicast-fast-forwarding cache Description 3Com Router 5000 Family and Router 6000 Family Command Reference If you issue the command without specifying the argument, summary information about all fast forwarding table entries in the multicast fast forwarding cache is displayed. If you issue the command with a multicast address specified, summary information about all fast forwarding table entries related to the multicast address is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip multicast-policy ● 147 display ip multicast-policy Purpose Use the display ip multicast-policy command to view the multicast policy routing information. Syntax display ip multicast-policy [ setup interface interface-type interface-num | statistic interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies an interface by its type and number.
148 ● display ip policy 3Com Router 5000 Family and Router 6000 Family Command Reference display ip policy Purpose Use the display ip policy command to view the routing policies of local and configured interface policy routings. Syntax display ip policy Parameters None Example Display the routing policies of the local and configured interface policy routings. <3Com> display ip policy Route-policy Interface pr02 Local pr02 Virtual-Template0 pr01 Ethernet 0/0/0 The first line is prompt information.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip policy setup ● 149 display ip policy setup Purpose Use the display ip policy setup command to view the setting information of policy routings. Syntax display ip policy setup { local | interface interface-type interface-number } Parameters local Displays the setting information of local policy routings. interface Displays the setting information of interface policy routings. interface-type Interface type.
150 ● display ip policy statistic 3Com Router 5000 Family and Router 6000 Family Command Reference display ip policy statistic Purpose Use the display ip policy statistic command to view the statistics of policy routings. Syntax display ip policy statistic { local | interface interface-type interface-number } Parameters local Displays the statistics of local policy routing packets. interface Displays the statistics of interface policy routings. interface-type Interface type.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip socket ● 151 display ip socket Purpose Use the display ip socket command to display the information about all sockets in the current system. Syntax display ip socket [ socktype sock_type ] [ task_id socket_id ] Parameters sock_type The type of a socket: (tcp:1, udp 2, raw ip 3) task_id The ID of a task. socket_id The ID of a socket. Example Display the information about the socket of TCP type.
152 ● display ip socket View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display ip statistics ● 153 display ip statistics Purpose Use the display ip statistics command to view IP traffic statistics information. This command is used to display such statistics information as IP packet transmit/receive, packet assembly/disassembly, which is helpful to fault diagnosis. Syntax display ip statistics Parameters None Example Display the IP traffic statistic information.
154 ● display ip statistics 3Com Router 5000 Family and Router 6000 Family Command Reference before fast forwarding is enabled and/or other types of packets sent/received after fast forwarding fails.
3Com Router 5000 Family and Router 6000 Family Command Reference display nat ● 155 display nat Purpose Use the display nat command to display the configuration of address translation. Syntax display nat { address-group | aging-time | all | outbound | server | statistics | session [ vpn-instance vpn-instance-name ] [ slot slot-number ] [source global global-addr | source inside inside-addr ] [ destination ip-addr ] } Parameters address-group Displays the information of the address pool.
156 ● display nat 3Com Router 5000 Family and Router 6000 Family Command Reference Table 15 Description on the fields of the display nat command Field Description Protocol Protocol number. VPN indicates that the entry corresponds to a MPLS VPN virtual route forwarding instance. GlobalAddr Port Translated external address (source address) and port (source port).
3Com Router 5000 Family and Router 6000 Family Command Reference display nat connection-limit ● 157 display nat connection-limit Purpose Use the display nat connection-limit command to display the NAT-related connection limit statistics.
158 ● display nat connection-limit Example 3Com Router 5000 Family and Router 6000 Family Command Reference Display all NAT-related connection limit statistics. <3Com> display nat connection-limit View This command can be used in the following views: ■ Description Any view Users can view the desired connection limit statistics flexibly by executing this command. Statistics of all NAT-related connections will be displayed when no other parameters are followed with this command.
3Com Router 5000 Family and Router 6000 Family Command Reference display sot ● 159 display sot Purpose Use the display sot command to display the current state about SOT connections. Syntax display sot Parameters None Example Display the state about SOT connections. [Router] display sot This peer : 1.1.1.1 Serial0/0/0 group 1 (simple) sdlc-addr ip-addressstate frame_s frame_r conn_frames 1 2.2.2.
160 ● display sot 3Com Router 5000 Family and Router 6000 Family Command Reference Table 18 SOT connection states in simple/SDLC pass-through mode View SOT connection state is... When...
3Com Router 5000 Family and Router 6000 Family Command Reference display tcp statistics ● 161 display tcp statistics Purpose Use the display tcp statistics command to view TCP traffic statistic information. Syntax display tcp statistics Parameters None Example Display the TCP traffic statistic information.
162 ● display tcp statistics 3Com Router 5000 Family and Router 6000 Family Command Reference The confirmed packets number: 0 (the bytes of the confirmed data: 0), the repeated confirmed packets number: 0, ACK packets number already being confirmed but not being sent yet: 0. Sending statistics: Total number of packets sent: 0. The urgent packets number: 0. The control packets number: 0. (RST packets number: 0). The window detection packets number: 0, the window upgrading packets number: 0.
3Com Router 5000 Family and Router 6000 Family Command Reference display tcp status ● 163 display tcp status Purpose Use the display tcp status command to monitor TCP connection any time. Syntax display tcp status Parameters None Example Display the TCP connection status. <3Com> display tcp status TCPCB Local AddressForeign Address State 0442c394 10.110.93.146.2310.110.93.175.1538ESTAB 045d8074 0.0.0.0.210.0.0.0.
164 ● display udp statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display udp statistics Purpose Use the display udp statistics command to view TCP traffic statistic information. Syntax display udp statistics Parameters None Example Display the UDP traffic statistic information.
3Com Router 5000 Family and Router 6000 Family Command Reference display udp statistics ● 165 Description The command is used to display the traffic statistic information of all the active TCP connections. Statistics information is classified into two parts: receiving and sending, and each part can be further classified according to different types of packets, as checksum packets and error packets, for example.
166 ● display udp-helper server 3Com Router 5000 Family and Router 6000 Family Command Reference display udp-helper server Purpose Use the display udp-helper server command to display the information about the destination servers associated with the specified or all Ethernet interfaces. Syntax display udp-helper server [interface number ] Parameters number Example Display the information about the destination servers associated with Ethernet interface 0/0/0. Ethernet interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference dns domain ● 167 dns domain Purpose Use the dns domain command to configure a DNS domain name. Use the undo dns domain command to delete one or all DNS domain names. Syntax dns domain domain-name undo dns domain [ domain-name ] Parameters domain-name Example Configure a DNS domain name. DNS domain name. [Router] dns domain 3com.com Delete a specified DNS domain name. [Router] undo dns domain 3com.
168 ● dns-list 3Com Router 5000 Family and Router 6000 Family Command Reference dns-list Purpose Use the dns-list command to configure DNS server IP addresses in a global DHCP address pool. Use the undo dns-list command to delete the configuration. Syntax dns-list ip-address [ ip-address ] undo dns-list { ip-address | all } Parameters ip-address Default By default, no DNS server address is configured. Example Specify 1.1.1.254 as a DNS server address for DHCP address pool 0.
3Com Router 5000 Family and Router 6000 Family Command Reference dns-proxy enable ● 169 dns-proxy enable Purpose Use the dns-proxy enable command to enable DNS proxy. Use the undo dns-proxy enable command to disable DNS proxy. Syntax dns-proxy enable undo dns-proxy enable Parameters None Default By default, DNS proxy is disabled. Example Enable DNS proxy on the router.
170 ● dns resolve 3Com Router 5000 Family and Router 6000 Family Command Reference dns resolve Purpose Use the dns resolve command to enable DNS resolving. Use the undo dns resolve command to disable DNS resolving. Syntax dns resolve undo dns resolve Parameters None Default By default, DNS resolving is disabled. Example Enable DNS resolving.
3Com Router 5000 Family and Router 6000 Family Command Reference dns server ● 171 dns server Purpose Use the dns server command to configure IP address of a DNS server. Use the undo dns server command to delete IP address of a DNS server. Syntax dns server ip-address undo dns server [ ip-address ] Parameters ip-address Example Configure IP address of a DNS server. IP address of a DNS server. [Router] dns server 10.110.66.1 Delete IP address of a specified DNS server. [Router] undo dns server 10.
172 ● domain-name 3Com Router 5000 Family and Router 6000 Family Command Reference domain-name Purpose Use the domain-name command to configure the domain name that a global address pool of the DHCP server allocates to clients. Use the undo domain-name command to delete the configured domain name. Syntax domain-name domain-name undo domain-name domain-name Parameters domain-name Default By default, no domain name has been allocated to DHCP clients and domain name is null.
3Com Router 5000 Family and Router 6000 Family Command Reference expired ● 173 expired Purpose Use the expired command to configure a valid period allowed for leasing IP addresses in a global DHCP address pool. Use the undo expired command to restore the default setting. Syntax expired { day day [ hour hour [ minute minute ] ] | unlimited } undo expired Parameters day day Number of days. Valid values are 0 to 365. hour hour Number of hours. Valid values are 0 to 23.
174 ● gateway-list 3Com Router 5000 Family and Router 6000 Family Command Reference gateway-list Purpose Use the gateway-list command to configure IP addresses of the egress GW routers used by DHCP clients. Use the undo gateway-list command to delete the configuration. Syntax gateway-list ip-address [ ip-address ] undo gateway-list { ip-address | all } Parameters ip-address IP address of egress GW router. You can configure up to eight IP addresses separated by spaces in a command.
3Com Router 5000 Family and Router 6000 Family Command Reference gratuitous-arp-learning enable ● 175 gratuitous-arp-learning enable Purpose Use the gratuitous-arp-learning enable command to enable the address learning function of gratuitous ARP. Use the undo gratuitous-arp-learning enable command to disable the address learning function of gratuitous ARP.
176 ● gratuitous-arp-sending enable 3Com Router 5000 Family and Router 6000 Family Command Reference gratuitous-arp-sending enable Purpose Use the gratuitous-arp-sending enable command to configure the system to return ARP responses when receiving gratuitous ARP packets from other network segments. The system, however, does not learn the received ARP entries. Use the undo gratuitous-arp-sending enable command to disable the system to respond to gratuitous ARP requests from .
3Com Router 5000 Family and Router 6000 Family Command Reference icmp redirect send ● 177 icmp redirect send Purpose Use the icmp redirect send command to enable the sending of ICMP Redirect messages. Use the undo icmp redirect send command to disable the sending of ICMP messages. Syntax icmp redirect send undo icmp redirect send Parameters None Default By default, the system can send ICMP Redirect messages. Example Enable the sending of ICMP Redirect messages.
178 ● if-match acl 3Com Router 5000 Family and Router 6000 Family Command Reference if-match acl Purpose Use the if-match acl command to set the match condition for IP address. Use the undo if-match acl command to delete the IP address match condition. Syntax if-match acl acl-number undo if-match acl Parameters acl-number Example Set packets that accord with the access list 2010 to be matched. Address access control list number.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match acl ● 179 if-match acl Purpose Use the if-match acl command to set conditions that multicast packets should meet in each policy node. Use the undo if-match acl command to remove the match conditions set. Syntax if-match acl acl-number undo if-match acl acl-number Parameters acl-number Default By default, no if-match clause is defined. Example Set the ACL conditions that multicast packets need to meet.
180 ● if-match packet length 3Com Router 5000 Family and Router 6000 Family Command Reference if-match packet length Purpose Use the if-match packet-length command to set length match conditions of IP packets. Use the undo if-match packet-length command to delete the configuration about IP packet length match conditions. Syntax if-match packet-length min-len max-len undo if-match packet-length Parameters Example min-len Minimum size of network layer packets. Valid values are 0 to 2147483647.
3Com Router 5000 Family and Router 6000 Family Command Reference ip address ● 181 ip address Purpose Use the ip address command to set an IP address for an interface. Use the undo ip address command to delete an IP address of the interface. Syntax ip address ip-address net-mask [ sub ] undo ip address [ ip-address net-mask [sub] ] Parameters ip-address Interface IP address, in dot delimitated decimal format. net-mask The mask of the corresponding subnet, in dot delimitated decimal format.
182 ● ip address 3Com Router 5000 Family and Router 6000 Family Command Reference ip-address net-mask sub indicates to delete the slave address. All the slave addresses must be deleted before the master IP address can be deleted. In addition, any two IP addresses configured for all interfaces on a router cannot be located in the same subnet.
3Com Router 5000 Family and Router 6000 Family Command Reference ip address bootp-alloc ● 183 ip address bootp-alloc Purpose Use the ip address bootp-alloc command to configure the Ethernet interface to obtain IP address using BOOTP. Use the undo ip address bootp-alloc command to disable the Ethernet interface to obtain IP address using BOOTP. Syntax ip address bootp-alloc undo ip address bootp-alloc Parameters None Default By default, the Ethernet interface does not obtain IP address using BOOTP.
184 ● ip address dhcp-alloc 3Com Router 5000 Family and Router 6000 Family Command Reference ip address dhcp-alloc Purpose Use the ip address dhcp-alloc command to enable DHCP client on the Ethernet or WAN interface for obtaining local IP address. Use the undo ip address dhcp-alloc command to disable DHCP client. Syntax ip address dhcp-alloc undo ip address dhcp-alloc Parameters None Default By default, DHCP client is disabled. Example Enable DHCP client on Ethernet0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference ip forward-broadcast ● 185 ip forward-broadcast Purpose Use the ip forward-broadcast command to enable the current interface to forward broadcasts. Use the undo ip forward-broadcast command to disable the current interface to forward broadcasts. Syntax ip forward-broadcast [ acl-number ] undo ip forward-broadcast Parameters acl-number Default By default, the router does not forward broadcasts.
186 ● ip fast-forwarding 3Com Router 5000 Family and Router 6000 Family Command Reference ip fast-forwarding Purpose Use the ip fast-forwarding command to enable unicast fast packet forwarding on both inbound and outbound interfaces. Use the ip fast-forwarding inbound command to enable unicast fast packet forwarding on the inbound interface. Use the ip fast-forwarding outbound command to enable unicast fast packet forwarding on the outbound interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ip address ppp-negotiate ● 187 ip address ppp-negotiate Purpose Use the ip address ppp-negotiate command to allow IP address be assigned through negotiation at the interface. Use the undo ip address ppp-negotiate command to disable this function. Syntax ip address ppp-negotiate undo ip address ppp-negotiate Parameters None Default By default, no interface IP address negotiation is allowed.
188 ● ip address unnumbered 3Com Router 5000 Family and Router 6000 Family Command Reference ip address unnumbered Purpose Use the ip address unnumbered command to enable an interface to borrow the IP address of another interface. Use the undo ip address unnumbered command to disable this function on the interface. Syntax ip address unnumbered interface interface-type interface-number undo ip address unnumbered Parameters interface-type Name of the unnumbered interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ip count enable ● 189 ip count enable Purpose Use the ip count enable command to enable IP accounting. Use the undo ip count enable command to disable IP accounting. Syntax ip count enable undo ip count enable Parameters None Default By default, IP accounting is disabled. Example Enable IP accounting.
190 ● ip count exterior threshold 3Com Router 5000 Family and Router 6000 Family Command Reference ip count exterior threshold Purpose Use the ip count exterior-threshold command to configure maximum number of entries in the exterior hash table, with each entry for an IP packet that does not match any IP accounting rule. Use the undo ip count exterior-threshold command to restore the default value, that is, 0.
3Com Router 5000 Family and Router 6000 Family Command Reference ip count firewall denied ● 191 ip count firewall denied Purpose Use the ip count firewall-denied command to configure the IP Accounting to count the IP packets denied by the firewall on the current interface. Use the undo ip count firewall-denied command to restore the default.
192 ● ip count inbound packets 3Com Router 5000 Family and Router 6000 Family Command Reference ip count inbound packets Purpose Use the ip count inbound-packets command to configure the IP Accounting to count inbound IP packets on the current interface. Use the undo ip count inbound-packets command to configure the IP Accounting to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference ip count interior threshold ● 193 ip count interior threshold Purpose Use the ip count interior-threshold command to configure maximum number of entries in the interior hash table, with each entry for an IP packet matching the IP accounting rule. Use the undo ip count interior-threshold command to restore the default.
194 ● ip count rule 3Com Router 5000 Family and Router 6000 Family Command Reference ip count rule Purpose Use the ip count rule command to configure IP accounting rules. Use the undo ip count rule command to delete the specified or all IP accounting rules. Syntax ip count rule ip-address net-mask undo ip count rule [ ip-address net-mask ] Parameters ip-address Interface IP address, in dotted decimal format. It cannot be a loopback address.
3Com Router 5000 Family and Router 6000 Family Command Reference ip count outbound-packets ● 195 ip count outbound-packets Purpose Use the ip count outbound-packets command to configure the IP Accounting to count outbound IP packets on the current interface. Use the undo ip count outbound-packets command to restore the default. Syntax ip count outbound-packets undo ip count outbound-packets Parameters None Default By default, outbound IP packets on the interface are not counted.
196 ● ip count timeout 3Com Router 5000 Family and Router 6000 Family Command Reference ip count timeout Purpose Use the ip count timeout command to configure the aging time of IP accounting entries. Use the undo ip count timeout command to restore the default aging time. Syntax ip count timeout minutes undo ip count timeout Parameters minutes Example Set the aging time of IP accounting entries to 100 minutes. Aging time of IP accounting entries (in minutes). Valid values are 60 to 10,080 minutes.
3Com Router 5000 Family and Router 6000 Family Command Reference ip host ● 197 ip host Purpose Use the ip host command to configure the IP address corresponding to a host name. Use the undo ip host command to remove the IP address corresponding to a host name. Syntax ip host hostname ip-address undo ip host hostname [ ip-address ] Parameters hostname The name of a host, comprised of a string from 1 to 20 characters long.
198 ● ip local policy route-policy 3Com Router 5000 Family and Router 6000 Family Command Reference ip local policy route-policy Purpose Use the ip local policy route-policy command to enable local policy routing. Use the undo ip local policy route-policy command to delete the existing setting of the policy routing. Syntax ip local policy route-policy policy-name undo ip local policy route-policy policy-name Parameters policy-name Default By default, interface local policy routing is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference ip multicast-fast-forwarding ● 199 ip multicast-fast-forwarding Purpose Use the ip multicast-fast-forwarding command to enable multicast fast forwarding on an interface. Use the undo ip multicast-fast-forwarding command to disable multicast fast forwarding on an interface. When you configure this command on an interface, all fast forwarding table entries with this interface as the inbound interface in the cache are cleared.
200 ● ip multicast-policy route-policy 3Com Router 5000 Family and Router 6000 Family Command Reference ip multicast-policy route-policy Purpose Use the ip multicast-policy route-policy command to enable a multicast policy routing on an interface. Use the undo ip multicast-policy route-policy command to remove a multicast policy route applied on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ip policy route-policy ● 201 ip policy route-policy Purpose Use the ip policy route-policy command to enable policy routing at an interface. Use the undo ip policy route-policy command to delete the existing policy routing at an interface. Syntax ip policy route-policy policy-name undo ip policy route-policy policy-name Parameters policy-name Default By default, interface policy routing is disabled.
202 ● ip relay address cycle 3Com Router 5000 Family and Router 6000 Family Command Reference ip relay address cycle Purpose Use the ip relay address cycle command to enable the DHCP relay to allocate servers using the load sharing approach, where the HASH algorithm applies allowing different clients to use different DHCP servers and the same client to use the same DHCP server so long as it is possible.
3Com Router 5000 Family and Router 6000 Family Command Reference ip relay address (Interface view) ● 203 ip relay address (Interface view) Purpose Use the ip relay address command to specify the exact location of a DHCP server by configuring an IP relay address for it on the current interface. Use the undo ip relay address command to delete one or all relay IP addresses used by an interface.
204 ● ip relay address interface (System view) 3Com Router 5000 Family and Router 6000 Family Command Reference ip relay address interface (System view) Purpose Use the ip relay address interface command to configure a relay address for the Ethernet interfaces in a specified range for the purpose of transparent forwarding. Use the undo ip relay address interface command to delete the configured relay address.
3Com Router 5000 Family and Router 6000 Family Command Reference ip urpf ● 205 ip urpf Purpose Use the ip urpf command to enable URPF check on the interface. Use the undo ip urpf command to disable URPF check. Syntax ip urpf { strict | loose } [ allow-default ] [ acl acl-number ] undo ip urpf Parameters strict Strict check. The packet’s source address must be in the router’s FIB table. It searches reversely for outgoing interfaces for the packet.
206 ● limit 3Com Router 5000 Family and Router 6000 Family Command Reference limit Purpose Use the limit command to create rule under corresponding connection limit policy. Use the undo limit command to delete the rule under corresponding connection limit policy. Syntax limit limit-id acl acl-number [ { per-source | per-destination | per-service }* amount upper-limit lower-limit ] undo limit limit-id Parameters limit-id Rule ID for connection limit policy. Valid values are 0 to 255.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description limit ● 207 Connection Limit Policy view When a rule is bound with NAT, it cannot be modified or deleted. To modify or delete it needs to first unbind the rule from NAT.
208 ● link-protocol sot 3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol sot Purpose Use the link-protocol sot command to encapsulate the serial interface with SOT. Syntax link-protocol sot Parameters None Default By default, the serial interface is encapsulated with PPP. Example Encapsulate the Serial0/0/0 interface with SOT.
3Com Router 5000 Family and Router 6000 Family Command Reference nbns-list ● 209 nbns-list Purpose Use the nbns-list command to configure NetBIOS server addresses in a global DHCP address pool for the clients. Use the undo nbns-list command to remove the configured NetBIOS server addresses. Syntax nbns-list ip-address [ ip-address ] undo nbns-list { ip-address | all } Parameters ip-address IP address of NetBIOS server. You can configure up to eight IP addresses separated by spaces in a command.
210 ● netbios-type 3Com Router 5000 Family and Router 6000 Family Command Reference netbios-type Purpose Use the netbios-type command to configure the NetBIOS node type of the clients of a global DHCP address pool. Use the undo netbios-type command to restore the default setting. Syntax netbios-type { b-node | h-node | m-node | p-node } undo netbios-type Parameters b-node Broadcast mode, that is, hostname-IP maps are obtained by means of broadcast.
3Com Router 5000 Family and Router 6000 Family Command Reference network ● 211 network Purpose Use the network command to configure an IP address range used for dynamic allocation. Use the undo network command to delete the configuration. Syntax network ip-address [ mask netmask ] undo network Parameters ip-address The subnet address of an IP address pool used for dynamic allocation. mask netmask Network mask of the IP address pool. Natural mask will be adopted if the parameter is not specified.
212 ● option 3Com Router 5000 Family and Router 6000 Family Command Reference option Purpose Use the option command to configure the self-defined options for a DHCP global address pool. Use the undo option command to delete the DHCP self-defined options. Syntax option code { ascii ascii-string | hex hex-string | ip-address ip-address } undo option code Parameters Example code Option value that needs to be assigned by the user. ascii ascii-string ASCII string.
3Com Router 5000 Family and Router 6000 Family Command Reference nat address-group ● 213 nat address-group Purpose Use the nat address-group command to configure an address pool. Use the undo nat address-group command to delete an IP address pool. Syntax nat address-group group-number start-addr end-addr undo nat address-group group-number Parameters Example group-number Defined Address pool ID. Valid values are an integer ranging from 0 to 31. start-addr Starting IP address in the address pool.
214 ● nat aging-time 3Com Router 5000 Family and Router 6000 Family Command Reference nat aging-time Purpose Use the nat aging-time command to set the lifetime of NAT connections. Syntax nat aging-time { default | { dns | ftp-ctrl | | tcp | tcp-fin | tcp-syn | udp } seconds } Parameters default Sets the address translation lifetime values to the defaults. dns Sets the address translation lifetime for DNS to 60 seconds (default).
3Com Router 5000 Family and Router 6000 Family Command Reference nat agl ● 215 nat agl Purpose Use the nat alg command to enable the application gateway function of NAT. Use the undo nat alg command to disable the application gateway function of NAT. Syntax nat alg { dns | ftp | h323 | ils | nbt | pptp | sip } undo nat alg { dns | ftp | h323 | ils | nbt | pptp | sip } Parameters dns Supports DNS. ftp Supports FTP. h323 Supports H.323. ils Supports Internet locator service (ILS).
216 ● nat connection-limit-policy 3Com Router 5000 Family and Router 6000 Family Command Reference nat connection-limit-policy Purpose Use the nat connection-limit-policy command to specify the NAT connection limit policy. Use the undo nat connection-limit-policy command to delete the policy. Syntax nat connection-limit-policy policy-number undo nat connection-limit-policy policy-number Parameters policy-number Default By default, the policy is not bound with NAT. Example Bind policy 1 with NAT.
3Com Router 5000 Family and Router 6000 Family Command Reference nat dns-map ● 217 nat dns-map Purpose Use the nat dns-map command to configure a NAT entry, mapping a domain name to a triplet of external IP address, port number, and protocol type.
218 ● nat oubound 3Com Router 5000 Family and Router 6000 Family Command Reference nat oubound Purpose Use the nat outbound command to associate an ACL with an address pool, indicating that the address specified in the acl-number can be translated by using address pool group-number. Use the undo nat outbound command to remove the corresponding address translation.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description nat oubound ● 219 Interface view Translation of the source address of the packet that conforms to the ACL is accomplished by configuring the association between the ACL and the address pool. The system performs address translation by selecting one address in the address pool or by directly using the IP address of the interface.
220 ● nat outbound interface 3Com Router 5000 Family and Router 6000 Family Command Reference nat outbound interface Purpose Use the nat outbound interface command to associate an ACL with an interface and to use the address of the interface as the target address in the translations for the packets matching the ACL. After that, this address substitutes for the source addresses of the packets matching the ACL. Use the undo nat outbound interface command to remove an ACL to interface association.
3Com Router 5000 Family and Router 6000 Family Command Reference nat outbound static ● 221 nat outbound static Purpose Use the nat outbound static command to apply on the interface one-to-one address translation configured using the nat static command. Syntax nat outbound static Parameters None. Example Apply one-to-one address translation on the interface Serial0/0/0.
222 ● nat overlapaddress 3Com Router 5000 Family and Router 6000 Family Command Reference nat overlapaddress Purpose Use the nat overlapaddress command to map an overlapping address pool to a temporary address pool. Use the undo nat overlapaddress command to remove the specified map entry.
3Com Router 5000 Family and Router 6000 Family Command Reference Description nat overlapaddress ● 223 Overlapping address pools and temporary address pools come in pairs.
224 ● nat server 3Com Router 5000 Family and Router 6000 Family Command Reference nat server Purpose Use the nat server command to define a mapping table for internal servers. Users can access the internal server with the address and port as host-addr and host-port respectively through the address port defined by global-addr and global-port. Use the undo nat server command to remove the mapping table.
3Com Router 5000 Family and Router 6000 Family Command Reference nat server ● 225 host-addr IP address of the server in internal LAN. host-port Service port number provided for a server in the range of 0 to 65535, and the common used port numbers are replaced by key words. For example, www service port number is 80, which can also be represented by www. ftp service port number is 21, and ftp can also stands for it.
226 ● nat server 3Com Router 5000 Family and Router 6000 Family Command Reference [3Com-Serial0/0/0] undo nat server protocol tcp global 202.110.10.11 8070 inside 10.110.10.11 ftp Specify an outside address as 202.110.10.10, and map the ports ranging from 1001 to 1100 to the addresses of 10.110.10.1 to 10.110.10.100 respectively to access ftp service inside VPN vrf10. 202.110.10.10:1001 accesses 10.110.10.1 and 202.110.10:1002 accesses 10.110.10.2, etc.
3Com Router 5000 Family and Router 6000 Family Command Reference nat static ● 227 nat static Purpose Use the nat static command to configure a one-to-one private-to-public address binding. Use the undo nat static command to delete an existing one-to-one private-to-public address binding.
228 ● nat static inside 3Com Router 5000 Family and Router 6000 Family Command Reference nat static inside Purpose Use the nat static inside command to create a static net-to-net NAT entry. When the router translates addresses based on this type of NAT entry, it translates the network address portion without touching the host address portion. Use the undo nat static inside command to delete a static net-to-net NAT entry.
230 ● nslookup type 3Com Router 5000 Family and Router 6000 Family Command Reference nslookup type Purpose Use the nslookup type command to resolve the specified IP address or domain name to a domain name or IP address. Syntax nslookup type { ptr ip-address | a domain-name } Parameters ptr ip-address Resolves the specified IP address to a domain name. a domain-name Resolves the specified domain name to an IP address. The domain name may be any string up to 30 characters long.
3Com Router 5000 Family and Router 6000 Family Command Reference remote address ● 231 remote address Purpose Use the remote address command to configure to assign IP address for the peer interface. Use the undo remote address command to disable to assign IP address for the peer interface. Syntax remote address { ip-address | pool [ pool-number ] } undo remote address Parameters ip-address IP address. pool-number Global address pool number. Valid values are 0 to 99.
232 ● reset arp 3Com Router 5000 Family and Router 6000 Family Command Reference reset arp Purpose Use the reset arp command to clear the ARP entries in the ARP mapping table. Syntax reset arp [ all | dynamic | static | interface interface-type interface-number ] Parameters all Indicates to clear all ARP entries. dynamic Indicates to clear the dynamic ARP entries. static Indicates to clear the static ARP entries. interface Indicates the selected interface. interface-type Interface type.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dhcp ip-in-use ● 233 reset dhcp ip-in-use Purpose Use the reset dhcp server ip-in-use command to clear the DHCP dynamic address binding information, outdated or not. Syntax reset dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface [ interface-type interface-number ] | all } Parameters ip-address Binding information of a specified IP address. pool-name Specifies a global address pool.
234 ● reset dhcp relay statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset dhcp relay statistics Purpose Use the reset dhcp relay statistics command to clear the DHCP relay statistics. Syntax reset dhcp relay statistics Parameters None Example Clear the DHCP relay statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dhcp server conflict ● 235 reset dhcp server conflict Purpose Use the reset dhcp server conflict command to clear the statistics about DHCP address collision. Syntax reset dhcp server conflict { ip-address | all } Parameters ip-address A specified IP address. all All the address pools. Example Clear all the address collision statistics.
236 ● reset dhcp server statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset dhcp server statistics Purpose Use the reset dhcp server statistics command to clear the statistics on the DHCP server, including such information as number of DHCP address pools, automatically and manually bound addresses and expired addresses, number of unknown packets, number of DHCP request packets, and number of response packets.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dns dynamic-host ● 237 reset dns dynamic-host Purpose Use the reset dns dynamic-host command to clear the current contents in the domain name cache of the DNS client. Syntax reset dns dynamic-host Parameters None Example Clear the current contents in the domain name cache of the DNS client.
238 ● reset ip count 3Com Router 5000 Family and Router 6000 Family Command Reference reset ip count Purpose Use the reset ip count command to clear information that the IP Accounting retained about IP packets. Syntax reset ip count { interior | exterior | firewall-denied | all } Parameters firewall-denied Information about the IP packets denied by the firewall. interior Information about the IP packets in an interior hash table.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ip fast-forwarding cache ● 239 reset ip fast-forwarding cache Purpose Use the reset ip fast-forwarding cache command to reset the unicast fast forwarding cache. Syntax reset ip fast-forwarding cache Parameters None Example Clear the unicast fast forwarding cache.
240 ● reset ip multicast-fast-forwarding cache 3Com Router 5000 Family and Router 6000 Family Command Reference reset ip multicast-fast-forwarding cache Purpose Use the reset ip multicast-fast-forwarding cache command to clear the multicast fast forwarding cache. However, this command does not release the space occupied by the cache. Syntax reset ip multicast-fast-forwarding cache Parameters None Example Clear the multicast fast forwarding cache.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ip statistics ● 241 reset ip statistics Purpose Use the reset ip statistics command to clear the IP statistics information. In some special cases, it is necessary to clear the IP statistics information and perform new statistics. Syntax reset ip statistics Parameters None Example Clear IP statistics information.
242 ● reset nat 3Com Router 5000 Family and Router 6000 Family Command Reference reset nat Purpose Use the reset nat command to clear up the mapping tables of address translation in the memory and release all the memory dynamically allocated to store the mapping tables. Syntax reset nat session slot slot-number Parameters slot slot-number Number of the interface card, which only exists in the distributed environment. session Clears the information of the address translation table.
3Com Router 5000 Family and Router 6000 Family Command Reference reset tcp statistics ● 243 reset tcp statistics Purpose Use the reset tcp statistics command to clear TCP traffic statistic information. After the execution of this command, there’s no prompt information on the screen, and the existing statistics are cleared. Syntax reset tcp statistics Parameters None Example Display the TCP traffic statistic information.
244 ● reset udp statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset udp statistics Purpose Use the reset udp statistics command to clear the UDP statistics information. After the execution of this command, there’s no prompt information on the screen, and the existing statistics are cleared. Syntax reset udp statistics Parameters None Example Clear UDP traffic statistics information.
3Com Router 5000 Family and Router 6000 Family Command Reference route-policy ● 245 route-policy Purpose Use the route-policy command to create a route-policy or a route-policy node and enter the corresponding view. Use the undo route-policy command to remove a route-policy or a route-policy node.
246 ● route-policy Description 3Com Router 5000 Family and Router 6000 Family Command Reference Route-policies are used for policy routing. One route-policy may contain multiple nodes, each consisting of multiple if-match and apply clauses. The if-match clauses of a route-policy node define the match rules whereas its apply clauses define the actions performed on the packets filtered in by the node.
3Com Router 5000 Family and Router 6000 Family Command Reference route-policy ● 247 route-policy Purpose Use the route-policy command to configure a route-policy node and enter the route-policy view. Use the undo route-policy command to remove a route-policy or a node.
248 ● route-policy Description 3Com Router 5000 Family and Router 6000 Family Command Reference The policy of IP multicast policy routing is implemented by configuring route-policies. Multiple route-policies can be configured on the router. Each route-policy may contain multiple route-nodes. Different route-nodes in a route-policy are identified by different integer sequence-numbers.
3Com Router 5000 Family and Router 6000 Family Command Reference sot counter keepalive ● 249 sot counter keepalive Purpose Use the sot counter keepalive command to specify the number of keepalive checks before disconnecting from the peer SOT entity. Use the undo sot counter keepalive command to disable keepalive check before disconnection. The peer SOT entity is disconnected without keepalive check.
250 ● sot gather 3Com Router 5000 Family and Router 6000 Family Command Reference sot gather Purpose Use the sot gather command to assign the serial interface to an existing SOT protocol group. Use the undo sot gather command to remove the serial interface from its SOT protocol group. Syntax sot gather group-number undo sot gather group-number Parameters group-number Example Assign interface Serial 0/0/0 to SOT protocol group 2. Any integer bettween 1 and 255.
3Com Router 5000 Family and Router 6000 Family Command Reference sot group-set ● 251 sot group-set Purpose Use the sot group-set command to set up a SOT protocol group. Use the undo sot group-set command to remove a SOT protocol group. Syntax sot group-set group-number { simple | sdlc } undo sot group-set group-number Parameters group-number An integer between 1 and 255. simple Simple protocol group, corresponding to simple SOT mode.
252 ● sot peer 3Com Router 5000 Family and Router 6000 Family Command Reference sot peer Purpose Use the sot peer command to assign an IP address to the local SOT entity. Use the undo sot peer command to remove the local SOT entity. Syntax sot peer ip-address undo sot peer Parameters ip-address Example Assign the IP address 131.108.254.6 to the local SOT entity. IP address of the local SOT entity. [Router] sot peer 131.108.254.
3Com Router 5000 Family and Router 6000 Family Command Reference sot sdlc broadcast ● 253 sot sdlc broadcast Purpose Use the sot sdlc broadcast command to configure the broadcast address FF for the connected SDLC terminals, allowing them to receive broadcast frames. Use the undo sot sdlc broadcast command to disable SDLC broadcast. Syntax sot sdlc broadcast undo sot sdlc broadcast Parameters None Default By default, SDLC broadcast is disabled.
254 ● sot sdlc controller 3Com Router 5000 Family and Router 6000 Family Command Reference sot sdlc controller Purpose Use the sot sdlc controller command to configure the SDLC address of a connected terminal. Use the undo sot sdlc controller command to remove the SDLC address of a connected terminal. Syntax sot sdlc controller sdlc-address undo sot sdlc controller sdlc-address Parameters sdlc-address Default By default, no terminal is specified. Example Configure the terminal C2.
3Com Router 5000 Family and Router 6000 Family Command Reference sot sdlc-status primary ● 255 sot sdlc-status primary Purpose Use the sot sdlc-status primary command to set the role of the router to SDLC primary node. Use the undo sot sdlc-status command to delete the role setting. Syntax sot sdlc-status primary undo sot sdlc-status Parameters None Default By default, no role is assigned to the router. Example Specify the router to be SDLC primary node.
256 ● sot sdlc-status secondary 3Com Router 5000 Family and Router 6000 Family Command Reference sot sdlc-status secondary Purpose Use the sot sdlc-status secondary command to set the role of the router to SDLC secondary node. Use the undo sot sdlc-status command to delete the role setting. Syntax sot sdlc-status secondary undo sot sdlc-status Parameters None Default By default, no role is assigned to the router. Example Set the role of the router to SDLC secondary node.
3Com Router 5000 Family and Router 6000 Family Command Reference sot send address ● 257 sot send address Purpose Use the sot send address command to configure the route for sending SDLC frames to the specified specific terminal. Use the undo sot send address command to remove the specified route.
258 ● sot send all tcp 3Com Router 5000 Family and Router 6000 Family Command Reference sot send all tcp Purpose Use the send all tcp command to forward all received SDLC frames to the specified address. Use the undo send all tcp command to disable the router to forward the SDLC frames received on the interface. Syntax sot send all tcp ip-address undo sot send all tcp ip-address Parameters ip-address Default By default, the received SDLC frames are not forwarded.
3Com Router 5000 Family and Router 6000 Family Command Reference sot timer keepalive ● 259 sot timer keepalive Purpose Use the sot timer keepalive command to configure the keepalive timer. Use the undo sot timer keepalive command to restore the default. Syntax sot timer keepalive [ seconds ] undo sot timer keepalive Parameters seconds Example Set the keepalive timer to 60 seconds. Keepalive timer (in seconds). Valid values are 1 to 300. If no value is specified, the default is 30 seconds.
260 ● static-bind ip-address 3Com Router 5000 Family and Router 6000 Family Command Reference static-bind ip-address Purpose Use the static-bind ip-address command to configure an IP address for a static address binding in DHCP address pool view. Use the undo static-bind ip-address command to delete the static address binding in DHCP address pool view. Syntax static-bind ip-address ip-address [ mask netmask ] undo static-bind ip-address Parameters ip-address IP address to be bound.
3Com Router 5000 Family and Router 6000 Family Command Reference static-bind { mac address | client identifier } ● 261 static-bind { mac address | client identifier } Purpose Use the static-bind { mac-address | client-identifier } command to configure a MAC address or client identifier for a static binding. Use the undo static-bind { mac-address | client-identifier } command to delete the MAC address or client identifier from a static binding.
262 ● synchronize arp 3Com Router 5000 Family and Router 6000 Family Command Reference synchronize arp Purpose Use the synchronize arp command to enable authorized ARP for global DHCP address pools. Use the undo synchronize arp command to disable authorized ARP that has been enabled for global DHCP address pools. Syntax synchronize arp undo synchronize arp Parameters None Default By default, authorized ARP is disabled. Example Enter global address pool view and enable authorized ARP.
3Com Router 5000 Family and Router 6000 Family Command Reference tcp timer syn-timeout ● 263 tcp timer syn-timeout Purpose Use the tcp timer syn-timeout command to configure the TCP synwait timer. Use the undo tcp timer syn-timeout command to restore the default value of the timer. Syntax tcp timer syn-timeout time-value undo tcp timer syn-timeout Parameters time-value Example Configure the TCP synwait timer value as 55 seconds. TCP synwait timer value (in seconds). Valid values are 2 to 600.
264 ● tcp timer fin-timeout 3Com Router 5000 Family and Router 6000 Family Command Reference tcp timer fin-timeout Purpose Use the tcp timer fin-timeout command to configure the TCP finwait timer. Use the undo tcp timer fin-timeout command to restore the default value of the timer. Syntax tcp timer fin-timeout time-value undo tcp timer fin-timeout Parameters time-value Example Configure the TCP finwait timer value as 675 seconds. TCP finwait timer value (in seconds). Valid values are 76 to 3600.
3Com Router 5000 Family and Router 6000 Family Command Reference tcp mss ● 265 tcp mss Purpose Use the tcp mss command to designate a value as a threshold for TCP packets to be fragmented. Use the undo tcp mss command to prevent TCP packets from being fragmented. Syntax tcp mss value undo tcp mss Parameters Value Default By default, TCP packets are not fragmented. Example Configure the threshold of TCP packet fragmentation to be 300. The threshold for the TCP packet to be fragmented.
266 ● tcp window 3Com Router 5000 Family and Router 6000 Family Command Reference tcp window Purpose Use the tcp window command to configure the size of the transceiving buffer of the connection-oriented Socket. Use the undo tcp window command to restore the default size of the buffer, or 8 KB. Syntax tcp window-size window-size undo tcp window Parameters window-size Example Configure the size of the transceiving buffer of the connection-oriented Socket as 4 KB.
3Com Router 5000 Family and Router 6000 Family Command Reference udp-helper enable ● 267 udp-helper enable Purpose Use the udp-helper enable command to enable UDP Helper. Use the undo udp-helper enable command to disable UDP Helper. Syntax udp-helper enable undo udp-helper enable Parameters None Default By default, UDP Helper is disabled. Example Enable UDP Helper.
268 ● udp-helper port 3Com Router 5000 Family and Router 6000 Family Command Reference udp-helper port Purpose Use the udp-helper port command to specify the UDP port number in the UDP broadcasts to be forwarded. Use the undo udp-helper port command to disable the system to forward the UDP broadcasts with the specified UDP port number.
3Com Router 5000 Family and Router 6000 Family Command Reference udp-helper server ● 269 udp-helper server Purpose Use the udp-helper server command to configure the destination server to which the UDP broadcasts received on the interface are forwarded. Use the undo udp-helper server command to remove the configured destination server. Syntax udp-helper server ip-address undo udp-helper server [ip-address ] Parameters ip-address Default By default, no destination server is configured.
270 ● voice-config 3Com Router 5000 Family and Router 6000 Family Command Reference voice-config Purpose Use the voice-config command to enable the DHCP server to send option 184 and suboptions of 184 when it assigns addresses from the global address pool. Use the undo dhcp server voice-config command to disable the DHCP server to send option 184 and suboptions of 184 when it assigns addresses from the global address pool.
3Com Router 5000 Family and Router 6000 Family Command Reference Description voice-config ● 271 The DHCP server sends option 184 and suboptions of 184 only when thus required by the DHCP client. Configure the NCP-IP suboption before configuring other suboptions; otherwise, they cannot take effect.
272 ● x25 qllc-switch 3Com Router 5000 Family and Router 6000 Family Command Reference x25 qllc-switch Purpose Use the X25 qllc-switch command to create a QLLC switching map entry, an association of X.121 address, MAC address of the SNA device, and local virtual MAC address. Use the undo X25 qllc-switch command to delete the QLLC switching map entry. Syntax X25 qllc-switch x.121-address virtual-mac mac-address [ partner-mac mac-address ] X25 qllc-switch x.121-address Parameters x.121-address X.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 ROUTING PROTOCOL ALPHABETICAL LISTING OF COMMANDS abr-summary 7 aggregate 8 apply as-path 10 apply community 11 apply cost 12 apply cost-type 13 apply ip-address 14 apply isis 16 apply local-preference 17 apply origin 18 apply tag 19 area 21 area-authentication-mode 22 asbr-summary 23 authentication-mode 24 balance 25 band-based-sharing 26 bgp 27 checkzero 28 compare-different-as-med 29 confederation id 30 confederation nonstandard 31 co
2● 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp network 57 display bgp paths 58 display bgp peer 59 display bgp routing 61 display bgp routing as-path-acl 63 display bgp routing cidr 65 display bgp routing community 66 display bgp routing community-list 67 display bgp routing dampened 68 display bgp routing different-origon-as 69 display bgp routing flap-info 70 display bgp routing peer { advertised | received } 72 display bgp routing peer dampened 73 display bgp routing pe
3Com Router 5000 Family and Router 6000 Family Command Reference display rip 128 display rip interface 129 display rip routing 130 display rip vpn-instance 131 display route-policy 132 domain-authentication-mode 133 filter-policy 134 filter-policy export 135 filter-policy export 136 filter-policy export 137 filter-policy export 138 filter-policy gateway 139 filter-policy import 141 filter-policy import 143 filter-policy import 144 filter-policy import 145 group 147 host-route 148 if-match acl 149 if-match
4● 3Com Router 5000 Family and Router 6000 Family Command Reference isis timer lsp 194 isis timer retransmit 195 loadbandwidth 196 log-peer-change 197 log-peer-change 198 log-peer-change 199 md5-compatible 200 memory 201 memory auto-establish disable 203 memory auto-establish enable 204 multi-path-number 205 network 206 network 208 network 209 network-entity 210 nssa 211 opaque-capability 212 ospf 213 ospf authentication-mode 215 ospf cost 216 ospf dr-priority 217 ospf mib-binding 218 ospf mtu-enable 219
3Com Router 5000 Family and Router 6000 Family Command Reference preference 251 preference 252 preference 253 preference 254 reflect between-clients 255 reflector cluster-id 256 refresh bgp 257 reset 258 reset bgp 259 reset bgp flap-info 260 reset bgp group 261 reset dampening 262 reset ip routing-table 263 reset isis all 264 reset isis peer 265 reset loadsharing 266 reset ospf 267 rip 268 rip authentication-mode 269 rip input 271 rip metricin 272 rip metricout 273 rip output 274 rip split-horizon 275 rip
6● 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference abr-summary ● 7 abr-summary Purpose Use the abr-summary command to configure the route aggregation on the area border router (ABR). Use the undo abr-summary command to cancel the function of route aggregation on the area border router. Syntax abr-summary ip-address mask [ advertise | not-advertise ] undo abr-summary ip-address mask Parameters ip-address Network segment address. mask Network mask.
8 ● aggregate 3Com Router 5000 Family and Router 6000 Family Command Reference aggregate Purpose Use the aggregate command to establish an aggregated record in the BGP routing table. Use the undo aggregate command to cancel the function.
3Com Router 5000 Family and Router 6000 Family Command Reference Description aggregate ● 9 The keywords are explained as follows: Table 1 Functions of the keywords Keywords Function as-set Used to create an aggregated route, whose AS path information includes individual routes. Use this keyword carefully when many AS paths need to be aggregated, for the frequent change of individual routes may lead to route vibration.
10 ● apply as-path 3Com Router 5000 Family and Router 6000 Family Command Reference apply as-path Purpose Use the apply as-path command to specify the AS numbers to be added in front of the original AS path in route-policy. Use the undo apply as-path command to cancel the AS sequence numbers added in front of the original AS path. Syntax apply as-path as-number-1 [ as-number-2 [ as-number-3 ... ] ] undo apply as-path Parameters as-number-1... as-number-nAS numbers to be added.
3Com Router 5000 Family and Router 6000 Family Command Reference apply community ● 11 apply community Purpose Use the apply community command to set BGP community attributes in route-policy. Use the undo apply community command to cancel the configured BGP community attributes. Syntax apply community { { {aa:nn | no-export-sunconfed | no-export | no-advertise} … [ additive ] } | additive | none } undo apply community Parameters aa:nn Community number.
12 ● apply cost 3Com Router 5000 Family and Router 6000 Family Command Reference apply cost Purpose Use the apply cost command to set the route cost value of route information. Use the undo apply cost command to cancel the apply clause. Syntax apply cost value undo apply cost Parameters value Example Display how to define one apply clause. When it is used for setting route information attribute, it sets the route cost value of route information as 120.
3Com Router 5000 Family and Router 6000 Family Command Reference apply cost-type ● 13 apply cost-type Purpose Use the apply cost-type command to set the route cost type of route information. Use the undo apply cost-type command to cancel the apply clause. Syntax apply cost-type [ internal | external ] undo apply cost-type Parameters internal Uses the cost type of IGP as MED value of BGP to advertise route to EBGP peer. external External cost type value of IS-IS.
14 ● apply ip-address 3Com Router 5000 Family and Router 6000 Family Command Reference apply ip-address Purpose Use the apply ip-address command to set the next hop address of route information. Use the undo apply ip-address command to cancel the apply clause. Syntax apply ip-address [ default ] { next-hop ip-address [ ip-address ] | acl acl-number } undo apply ip-address [ default ] { next-hop ip-address [ ip-address ] | acl acl-number } Parameters default Specifies the default next-hop address.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ if-match interface ■ if-match acl ■ if-match ip-prefix ■ if-match ip next-hop ■ if-match cost ■ if-match tag ■ route-policy ■ apply local-preference ■ apply cost ■ apply origin ■ apply tag apply ip-address ● 15
16 ● apply isis 3Com Router 5000 Family and Router 6000 Family Command Reference apply isis Purpose Use the apply isis command to apply the level of a matched route to be redistributed to Level-1, Level-2 or Level-1-2. Use the undo apply isis command to remove the setting clause. Syntax apply isis [ level-1 | level-2 | level-1-2 ] undo apply isis Parameters level-1 Redistributes the matched route to Level-1 area. level-2 Redistributes the matched route to Level-2 area.
3Com Router 5000 Family and Router 6000 Family Command Reference apply local-preference ● 17 apply local-preference Purpose Use the apply local-preference command to apply the local preference of route information. Use the undo apply local-preference command to cancel the apply clause.
18 ● apply origin 3Com Router 5000 Family and Router 6000 Family Command Reference apply origin Purpose Use the apply origin command to set the routing source of BGP routing information. Use the undo apply origin command to cancel the apply clause.
3Com Router 5000 Family and Router 6000 Family Command Reference apply tag ● 19 apply tag Purpose Use the apply tag command to set the tag area of OSPF route information. Use the undo apply tag command to cancel the apply clause. Syntax apply tag value undo apply tag Parameters value Example Display how to define one apply clause. When it is used for setting route information attribute, it sets the tag area of route information as 100. Specifies the tag value of route information.
20 ● apply tag Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ if-match interface ■ if-match acl ■ if-match ip-prefix ■ if-match ip next-hop ■ if-match cost ■ if-match tag ■ route-policy ■ apply ip-address ■ apply local-preference ■ apply cost ■ apply origin
3Com Router 5000 Family and Router 6000 Family Command Reference area ● 21 area Purpose Use the area command to enter OSPF area view. Use the undo area command to cancel the designated area. Syntax area area-id undo area area-id Parameters area-id Example Enter area 0 view. ID of the OSPF area. Valid values are a decimal integer (ranging from 0 to 4294967295) or in IP address format. [3Com -ospf-1] area 0 [3Com -ospf-1-area-0.0.0.
22 ● area-authentication-mode 3Com Router 5000 Family and Router 6000 Family Command Reference area-authentication-mode Purpose Use the area-authentication-mode command to configure IS-IS to authenticate the received Level-1 routing information packets (LSP, CSNP and PSNP), according to the pre-defined mode and password. Use the undo area-authentication-mode command to configure IS-IS not to authenticate the said packets.
3Com Router 5000 Family and Router 6000 Family Command Reference asbr-summary ● 23 asbr-summary Purpose Use the asbr-summary command to configure summarization of redistributed routes by OSPF. Use the undo asbr-summary command to cancel the summarization. Syntax asbr-summary ip-address mask [ not-advertise | tag tag-value ] undo asbr-summary ip-address mask Parameters ip-address Matched IP address in dotted decimal notation. mask IP address mask in dotted decimal notation.
24 ● authentication-mode 3Com Router 5000 Family and Router 6000 Family Command Reference authentication-mode Purpose Use the authentication-mode command to configure one area of OSPF to support the authentication attribute. Use the undo authentication-mode command to cancel the authentication attribute of this area. Syntax authentication-mode { simple | md5 } undo authentication-mode Parameters simple Simple text authentication mode. md5 MD5 cipher text authentication mode.
3Com Router 5000 Family and Router 6000 Family Command Reference balance ● 25 balance Purpose Use the balance command to configure the number of routes participating in BGP load balancing. Use the undo balance command to restore the default, that is, 1. In this case, load balancing is disabled. Syntax balance num undo balance Parameters num Example Set the number of routes participating in BGP load balancing to 2. Number of the BGP routes participating in load balancing. It is in the range 1 to 8.
26 ● band-based-sharing 3Com Router 5000 Family and Router 6000 Family Command Reference band-based-sharing Purpose Use the band-based-sharing command to enable bandwidth-based unbalanced load sharing. Use the undo band-based-sharing command to disable bandwidth-based unbalanced load sharing. Syntax band-based-sharing undo band-based-sharing Parameters None Default By default, bandwidth-based unbalanced load sharing is disabled. Example Enable bandwidth-based unbalanced load sharing.
3Com Router 5000 Family and Router 6000 Family Command Reference bgp ● 27 bgp Purpose Use the bgp command to enable BGP and enter the BGP view. Use the undo bgp command to disable BGP. Syntax bgp as-number undo bgp [ as-number ] Parameters as-number Default By default, BGP is not enabled. Example Enable BGP. Specifies the local AS number, ranging from 1 to 65535.
28 ● checkzero 3Com Router 5000 Family and Router 6000 Family Command Reference checkzero Purpose Use the checkzero command to check the zero field of RIP-1 packet. Use the undo checkzero command to cancel the check of the zero fields. Syntax checkzero undo checkzero Parameters None Default By default, RIP-1 performs the zero field check. Example Configure not to perform zero check for RIP-1 packet.
3Com Router 5000 Family and Router 6000 Family Command Reference compare-different-as-med ● 29 compare-different-as-med Purpose Use the compare-different-as-med command to enable comparison of MED values of routes from neighbors residing in different ASs when determining the best route. Use the undo compare-different-as-med command to disable the comparison.
30 ● confederation id 3Com Router 5000 Family and Router 6000 Family Command Reference confederation id Purpose Use the confederation id command to configure confederation identifier. Use the undo confederation id command to cancel the configured confederation ID. Syntax confederation id as-number undo confederation id Parameters as-number Default By default, the confederation ID is not configured. Example Confederation 9 consists of four sub-ASs, namely, 38, 39, 40 and 41. Here, the peer 10.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference confederation nonstandard ● 31 confederation nonstandard Purpose Use the confederation nonstandard command, the router can be compatible with the AS confederation not adopting RFC1965. Use the undo confederation nonstandard command to cancel this function. Syntax confederation nonstandard undo confederation nonstandard Parameters None Default By default, the configured confederation is consistent with RFC1965.
32 ● confederation peer-as 3Com Router 5000 Family and Router 6000 Family Command Reference confederation peer-as Purpose Use the confederation peer-as command to specify the sub-ASs constituting a confederation. Use the undo confederation peer-as command to expel the specified sub-ASs from the confederation. Syntax confederation peer-as as-number-1 [ ......as-number-n ] undo confederation peer-as [ as-number-1 ] [......as-number-n ] Parameters as-number-1...
3Com Router 5000 Family and Router 6000 Family Command Reference cost-style ● 33 cost-style Purpose Use the cost-style command to set the cost type of an IS-IS packet received/sent by the router. Use the undo cost-style command to restore the default setting. Syntax cost-style { narrow | wide | compatible [ relax-spf-limit ] | narrow-compatible [ relax-spf-limit ] | wide-compatible } Parameters narrow Only receives/sends packets whose cost type is narrow.
34 ● dampening 3Com Router 5000 Family and Router 6000 Family Command Reference dampening Purpose Use the dampening command to make BGP route dampening valid or modify various BGP route dampening parameters. Use the undo dampening command to make the characteristics invalid. Syntax dampening [ half-life-reachable half-life-unreachable reuse suppress ceiling ] [ route-policy policy-name ] undo dampening Parameters half-life-reachable Specifies the half-life when the route is reachable.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ reset dampening ■ reset bgp flap-info ■ display bgp routing dampened ■ display bgp routing flap-info dampening ● 35
36 ● debugging bgp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging bgp Purpose Use the debugging bgp command to enable debugging of specified BGP packets and events. Use the undo debugging bgp command to disable debugging of specified BGP packets or events.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging isis ● 37 debugging isis Purpose Use the debugging isis command to enable IS-IS debugging. Use the undo debugging isis command to disable the function.
38 ● debugging isis Example 3Com Router 5000 Family and Router 6000 Family Command Reference Enable all the information debugging of IS-IS.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ospf ● 39 debugging ospf Purpose Use the debugging ospf command to enable OSPF debugging. Use the undo debugging ospf command to disable the function.
40 ● debugging ospf Description 3Com Router 5000 Family and Router 6000 Family Command Reference In OSPF multi-process, using debugging command, you can enable the debugging of all the process simultaneously or one of the processes only. If no process number is specified in the debugging command, the command is valid to all the processes. And it keeps the state during the router running period no matter OSPF process exits or not.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging rip ● 41 debugging rip Purpose Use the debugging rip command to enable RIP debugging. Use the undo debugging rip command to disable RIP debugging. Syntax debugging rip { packet [ interface type number ] | receive | send } Parameters packet Enables the RIP packets debugging. interface type number Enables RIP packet debugging on the specified interface. receive Enables the RIP receiving packets debugging.
42 ● default cost 3Com Router 5000 Family and Router 6000 Family Command Reference default cost Purpose Use the default cost command to configure the default routing cost of a redistributed route. Use the undo default cost command to restore the default value. Syntax default cost value undo default cost Parameters value Example Set the default routing cost of redistributing other routing protocol routes as 3. Default routing cost to be set. Valid values are 1 to 16.
3Com Router 5000 Family and Router 6000 Family Command Reference default cost ● 43 default cost Purpose Use the default cost command to configure the default cost for OSPF to redistribute external routes. Use the undo default cost command to restore the default value of the default routing cost configured for OSPF to redistribute external routes. Syntax default cost value undo default cost Parameters value Example Specify the default routing cost for OSPF to redistribute external routes as 10.
44 ● default-cost 3Com Router 5000 Family and Router 6000 Family Command Reference default-cost Purpose Use the default-cost command to configure the cost of the default route transmitted by OSPF to the STUB or NSSA area. Use the undo default-cost command to restore the cost of the default route transmitted by OSPF to the STUB or NSSA area to the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference default interval ● 45 default interval Purpose Use the default interval command to configure the default interval for OSPF to redistribute external routes. Use the undo default interval command to restore the default value of the default interval of redistributing external routes.
46 ● default limit 3Com Router 5000 Family and Router 6000 Family Command Reference default limit Purpose Use the default limit command to configure default value of maximum number of redistributed routes. Use the undo default limit command to restore the default value. Syntax default limit routes undo default limit Parameters routes Example Specify the default value of OSPF redistributing external routes as 200. Default value to the redistributed external routes in a unit time.
3Com Router 5000 Family and Router 6000 Family Command Reference default local-preference ● 47 default local-preference Purpose Use the default local-preference command to configure the local preference. Use the undo default local-preference command to restore the default value. Syntax default local-preference value undo default local-preference Parameters value Example Two routers RTA and RTB reside in the same autonomous area and use the X.
48 ● default med 3Com Router 5000 Family and Router 6000 Family Command Reference default med Purpose Use the default med command to configure the system MED value. Use the undo default med command to restore the default MED value. Syntax default med med-value undo default med Parameters med-value Example Routers RTA and RTB belong to AS100, and router RTC belongs to AS200. RTC is the peer of RTA and RTB. The network between RTA and RTC is X.
3Com Router 5000 Family and Router 6000 Family Command Reference default-route-advertise ● 49 default-route-advertise Purpose Use the default-route-advertise command to make the system generate a default route to OSPF area. Use the undo default-route-advertise command to cancel the generating of default route. Use the default-route-advertise command at ABR to generate a default route which is advertised via the Type-5 LSA or Type-7 LSA no matter whether there is a default route in the routing table.
50 ● default-route-advertise View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description OSPF view An OSPF router after the default-route-advertise command is executed will become an ASBR, as is similar to executing the import-route command on an OSPF router. But you cannot redistribute the default route into the OSPF area with the import-route command.
3Com Router 5000 Family and Router 6000 Family Command Reference default-route-advertise ● 51 default-route-advertise Purpose Use the default-route-advertise command to configure the default route of Level-1 and Level-2 routers. Use the undo default-route-advertise command to cancel this configuration.
52 ● default-route imported 3Com Router 5000 Family and Router 6000 Family Command Reference default-route imported Purpose Use the default-route imported command to redistribute local default routes into BGP. Use the undo default-route imported command to disable the redistribution. Syntax default-route imported undo default-route imported Parameters None Default By default, local default routes are not redistributed into BGP.
3Com Router 5000 Family and Router 6000 Family Command Reference default tag ● 53 default tag Purpose Use the default tag command to configure the default tag of OSPF when it redistributes an external route. Use the undo default tag command to restore the default tag of OSPF when it redistributes the external route. Syntax default tag tag undo default tag Parameters tag Example Set the default tag of OSPF redistributed external route of the autonomous system as 10. Default tag.
54 ● default type 3Com Router 5000 Family and Router 6000 Family Command Reference default type Purpose Use the default type command to configure the default type when OSPF redistributes external routes. Use the undo default type command to restore the default type when OSPF redistributes external routes. Syntax default type { 1 | 2 } undo default type Parameters type 1 External routes of type 1. type 2 External routes of type 2.
3Com Router 5000 Family and Router 6000 Family Command Reference delete static-routes all ● 55 delete static-routes all Purpose Use the delete static-routes all command to cancel all the static routes. Syntax delete static-routes all Parameters None Example Delete all the static routes configured on router.
56 ● display bgp group 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp group Purpose Use the display bgp group command to view the information of peer groups. Syntax display bgp [ multicast | [ vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } ] ] group [ group-name ] Parameters group-name A specified peer group. vpn-instance vpn-instance-name Name of VPN instance Example. Display the information of the peer group "aaa".
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp network ● 57 display bgp network Purpose Use the display bgp network command to view the routing information that has been configured. Syntax display bgp [ multicast | [ vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } ] ] network Parameters vpn-instance vpn-instance-name Name of VPN instance. route-distinguisher route-distinguisher Name of route-distinguisher.
58 ● display bgp paths 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp paths Purpose Use the display bgp paths command to view the information about AS paths Syntax display bgp paths as-regular-expression Parameters as-regular-expression Example Display the information about the AS paths. Matched AS path regular expression.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp peer ● 59 display bgp peer Purpose Use the display bgp peer command to view the information of peer. Use the display bgp multicast peer command to view the information of MBGP peer. Use the display bgp vpnv4 peer command to view the information of VPN peer.
60 ● display bgp peer 3Com Router 5000 Family and Router 6000 Family Command Reference View the details of peer 1.1.1.10. <3Com > display bgp peer 1.1.1.10 verbose Peer: 1.1.1.10+1024 Local: 1.1.1.20+179 Type: Internal State: Established Flags: <> Expiring Time: 00:02:49 Last State: OpenConfirm Last Event: RecvKeepAlive Last Error: None Options: <> Peer Version: 4 Peer ID: 1.1.1.10 Local ID: 8.8.8.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing ● 61 display bgp routing Purpose Use the display bgp routing command to view the BGP routing information in the BGP routing table. Use the display bgp multicast routing command to view the MBGP routing information in the BGP routing table. Use the display bgp vpnv4 routing command to view the VPN routing information in the BGP routing table.
62 ● display bgp routing 3Com Router 5000 Family and Router 6000 Family Command Reference #^ 129.1.10.0/24 5.5.5.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing as-path-acl ● 63 display bgp routing as-path-acl Purpose Use the display bgp routing as-path-acl command to view routes that match an as-path ACL. Syntax display bgp [ multicast | [ vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } ] ] routing as-path-acl aspath-acl-number Parameters acl-number Example Display routes that match filtering list.
64 ● display bgp routing as-path-acl View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing cidr ● 65 display bgp routing cidr Purpose Use the display bgp routing cidr command to view the routing information about the non-natural mask (namely the classless inter-domain routing, CIDR).
66 ● display bgp routing community 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing community Purpose Use the display bgp routing community command to view the routing information related to the specified BGP community number in the routing table.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing community-list ● 67 display bgp routing community-list Purpose Use the display bgp routing community-list command to view the routing information matching the specified BGP community list.
68 ● display bgp routing dampened 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing dampened Purpose Use the display bgp routing dampened command to view BGP dampened routes. Syntax display bgp routing dampened Parameters None Example Display BGP dampened routes.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing different-origon-as ● 69 display bgp routing different-origon-as Purpose Use the display bgp routing different-origin-as command to view routes that have different source autonomous systems. Syntax display bgp [ multicast ] routing different-origin-as Parameters None Example View the routes that have different source ASs.
70 ● display bgp routing flap-info 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing flap-info Purpose Use the display bgp routing flap-info command to view BGP flap statistics. When is <0.0.0.0 0.0.0.0>, this command will view the flap statistics of all BGP routes.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing flap-info ● 71 Table 10 Description on the fields of the display bgp routing flap-info command Field Description Flags State flags: # – valid ^ – best D – damped H – history I – internal (IGP) S – aggregate suppressed (suppressed) B – balance #D Valid and damped routes Dest/Mask The route to this destination network segment is damped.
72 ● display bgp routing peer { advertised | received } 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing peer { advertised | received } Purpose Use the display bgp routing peer command to view the routing information the specified BGP peer advertised or received. Syntax display bgp routing peer peer-address { advertised | received } [ network-address [ mask ] | statistic ] Parameters peer-address Specifies the peer to be displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing peer dampened ● 73 display bgp routing peer dampened Purpose Use the display bgp routing peer dampened command to view the information about the dampened routes received from the specified peer. Syntax display bgp routing peer peer-address dampened [ statistic | ip-address ] Parameters peer-address IP address of the BGP peer. statistic Statistics about dampened routes.
74 ● display bgp routing peer dampened 3Com Router 5000 Family and Router 6000 Family Command Reference Table 11 Description on the fields of display bgp routing peer dampened Field Description Flags State flags: # – valid ^ – best D – damped H – history I – internal (IGP) S – aggregate suppressed (suppressed) B – balance Dest/Mask Destination address/mask Source Source IP address Damping-limit Time after which the route can recover from the damped state Origin Origin attribute of the route, wh
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing peer regular-expression ● 75 display bgp routing peer regular-expression Purpose Use the display bgp routing peer regular-expression command to view the route information received from the specified peer and matching the specified regular expression. Syntax display bgp routing peer peer-address regular-expression text Parameters peer-address IP address of the BGP peer. statistic Statistics about dampened routes.
76 ● display bgp routing regular-expression 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing regular-expression Purpose Use the display bgp routing regular-expression command to view the routing information matching the specified AS regular expression.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing statistic ● 77 display bgp routing statistic Purpose Use the display bgp routing statistic command to display statistics about BGP routes. Syntax display bgp routing statistic Parameters None Example Display statistics about BGP routes.
78 ● display debugging ospf 3Com Router 5000 Family and Router 6000 Family Command Reference display debugging ospf Purpose Use the display debugging ospf command to view the state of the debug switches for each OSPF process. Syntax display debugging ospf Example View the global OSPF debugging state and each process debugging state.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip ip-prefix ● 79 display ip ip-prefix Purpose Use the display ip ip-prefix command to view the address prefix list. Syntax display ip ip-prefix [ ip-prefix-name ] Parameters ip-prefix-name Example Display the information of the address prefix list named p1. Specifies displayed address prefix list name. <3Com > display ip ip-prefix p1 ip-prefix p1 index 10: permit 192.168.10.
80 ● display ip routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table Purpose Use the display ip routing-table command to view the routing table summary. Syntax display ip routing-table Parameters None Example View the summary of current routing table. <3Com > display ip routing-table Routing Table: public net Destination/Mask Proto Pre Cost Nexthop 1.1.1.0/24 DIRECT 0 0 1.1.1.1 serial1/0/0 1.1.1.1/32 DIRECT 0 0 127.0.0.1 2.2.2.0/24 DIRECT 0 0 2.2.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table acl ● 81 display ip routing-table acl Purpose Use the display ip routing-table acl command to view the route filtered through specified basic access control list (ACL). Syntax display ip routing-table acl acl-number [ verbose ] Parameters acl_number References a basic ACL by its number. Valid values are 2000 to 2999.
82 ● display ip routing-table acl 3Com Router 5000 Family and Router 6000 Family Command Reference **Destination: 169.0.0.0Mask: 255.0.0.0 Protocol: #StaticPreference: 60 *NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1) Vlinkindex: 0 State: Age: 3:47Metric: 0/0 **Destination: 169.0.0.0Mask: 255.254.0.0 Protocol: #StaticPreference: 60 *NextHop: 2.1.1.1Interface: 2.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table ip_address ● 83 display ip routing-table ip_address Purpose Use the display ip routing-table ip_address command to view the routing information of the specified destination address. Syntax display ip routing-table ip_address [ mask ] [ longer-match ] [ verbose ] Parameters ip_address Destination IP address in dotted decimal format.
84 ● display ip routing-table ip_address 3Com Router 5000 Family and Router 6000 Family Command Reference Protocol: #StaticPreference: 60 *NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1) Vlinkindex: 0 State: Age: 3:47Metric: 0/0 There are no corresponding routes in the natural mask range (only display the longest matching route). View the detailed information. <3Com > display ip routing-table 169.253.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table ip_address1 ip_address2 ● 85 display ip routing-table ip_address1 ip_address2 Purpose Use the display ip routing-table ip_address1 ip_address2 command to view the routing information in the specified destination address range. Syntax display ip routing-table ip_address1 mask1 ip_address2 mask2 [ verbose ] Parameters ip_address1, ip_address2 Destination IP address in dotted decimal notation.
86 ● display ip routing-table ip-prefix 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table ip-prefix Purpose Use the display ip routing-table ip-prefix command to view the route that passed the filtering rule according to the specified ip prefix list. Syntax display ip routing-table ip-prefix ip-prefix-name [ verbose ] Parameters ip-prefix-name Prefix list name.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table ip-prefix ● 87 Protocol: #StaticPreference: 60 *NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1) Vlinkindex: 0 State: Age: 3:47 Metric: 0/0 **Destination: 169.0.0.0Mask: 255.254.0.0 Protocol: #StaticPreference: 60 *NextHop: 2.1.1.1Interface: 2.1.1.
88 ● display ip routing-table protocol 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table protocol Purpose Use the display ip routing-table protocol command to view the routing information of specified protocol. Syntax display ip routing-table protocol protocol [ inactive | verbose | vpn-instance vpn-instance-name] Parameters protocol ■ direct: Displays direct connection route information ■ static: Displays static route information.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table protocol ● 89 Display the static routing table. <3Com > display ip routing-table protocol static STATIC Routing tables: Summary count: 1 STATIC Routing tables status:: Summary count: 0 STATIC Routing tables status:: Summary count: 1 Destination/Mask Proto Pre Cost Nexthop 1.2.3.0/24 View 60 0 1.2.4.
90 ● display ip routing-table radix 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table radix Purpose Use the display ip routing-table radix command to view the routing table information in a tree structure. Syntax display ip routing-table radix Parameters None Example View the routing table information in a tree structure. <3Com > display ip routing-table radix Radix tree for INET (2) inodes 7 routes 5: +-32+--{210.0.0.1 +--0+ | | +--8+--{127.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table statistics ● 91 display ip routing-table statistics Purpose Use the display ip routing-table statistics command to view the integrated routing information. Syntax display ip routing-table [ vpn-instance vpn-instance-name ] statistics Parameters vpn-instance vpn-instance-name Example Specifies the name of the VPN-instance. Display the integrated routing information.
92 ● display ip routing-table verbose 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table verbose Purpose Use the display ip routing-table verbose command to view the verbose routing table information. Syntax display ip routing-table verbose Parameters None Example Display the verbose routing table information.
3Com Router 5000 Family and Router 6000 Family Command Reference Description display ip routing-table verbose ● 93 With the verbose parameter, this command displays the verbose routing table information. The descriptor describing the route state will be displayed first, then the statistics of the entire routing table will be output and finally the verbose description of each route will be output.
94 ● display ip routing-table vpn-instance 3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table vpn-instance Purpose Use the display ip routing-table vpn-instance command to view RIP information associated with vpn instance address family. Syntax display ip routing-table vpn-instance vpn-instance-name [ ip-address ] [ verbose ] Parameters vpn-instance-name VPN instance name. ip-address Destination IP address in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference display isis brief ● 95 display isis brief Purpose Use the display isis brief command to view the brief information of IS-IS. Syntax display isis brief View This command can be used in the following views: ■ Any view Parameters None Example View the brief information of IS-IS. display isis brief ISIS zq Protocol Brief Information : network-entity: 01.bbbb.bbbb.bbbb.
96 ● display isis interface 3Com Router 5000 Family and Router 6000 Family Command Reference display isis interface Purpose Use the display isis interface command to view the information of the IS-IS enabled interface. Syntax display isis interface [ verbose ] Parameters verbose Example Display the information about the IS-IS enabled interface. If this parameter is used, the details of the interface will be displayed. <3Com > display isis interface Interface IP Address Id Ethernet1/0/0 2.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display isis lsdb ● 97 display isis lsdb Purpose Use the display isis lsdb command to view the link state database of the IS-IS. Syntax display isis lsdb [ l1 ] [ l2 ] [ level-1 ] [ level-2 ] [ local ] [ verbose ] [ LSPID ] Parameters l1 and Level-1 Both refer to the link state database of Level-1. l2 and level-2 Both refer to the link state database of Level-2.
98 ● display isis mesh-group 3Com Router 5000 Family and Router 6000 Family Command Reference display isis mesh-group Purpose Use the display isis mesh-group command to view the IS-IS mesh group. Syntax display isis mesh-group Parameters None Example Add Interface serial1/0/0 and Interface serial2/0/0 running IS-IS into mesh group 100.
3Com Router 5000 Family and Router 6000 Family Command Reference display isis peer ● 99 display isis peer Purpose Use the display isis peer command to view IS-IS peer information. Syntax display isis peer [ verbose ] Parameters verbose Example Display the output information of the display isis peer command. When this parameter is configured, the area address carried in the Hello message from the peer will be displayed. Otherwise, only the summary information will be displayed.
100 ● display isis routing 3Com Router 5000 Family and Router 6000 Family Command Reference display isis routing Purpose Use the display isis routing command to view IS-IS routing information Syntax display isis routing Parameters None Example View the output information of display isis routing command.
3Com Router 5000 Family and Router 6000 Family Command Reference display isis spf-log ● 101 display isis spf-log Purpose Use the display isis spf-log command to view the SPF calculation log of the IS-IS. Syntax display isis spf-log Parameters None Example View the output information of display isis spf-log command. <3Com > display isis spf-log Details of Level 1 SPF Run: ------------------------------Trig.Event No.
102 ● display loadsharing ip address 3Com Router 5000 Family and Router 6000 Family Command Reference display loadsharing ip address Purpose Use the display loadsharing ip address command to view the statistics about the unbalanced load sharing based on interface bandwidth, including the number and ratio of the packets sent from the interfaces related to the equal-cost routes to a network address.
3Com Router 5000 Family and Router 6000 Family Command Reference display memory ● 103 display memory Purpose Use the display memory command to view the memory setting and state information related to the routing capacity. Syntax display memory [ limit ] Parameters limit Example Display the current memory setting and state information. Displays the lower limit and safety value of the router idle memory.
104 ● display memory View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Any view It includes available memory and state information about connections such as times for disconnecting connections, times for reestablishing connections and whether the current system is in the emergent state or not.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf abr-asbr ● 105 display ospf abr-asbr Purpose Use the display ospf abr-asbr command to view information on the routes to the Area Border Router (ABR) and Autonomous System Border Router (ASBR) of OSPF. Syntax display ospf [ process-id ] abr-asbr Parameters process-id Example Display the information of the OSPF ABR and ASBR. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes.
106 ● display ospf asbr-summary 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf asbr-summary Purpose Use the display ospf asbr-summary command to view summary about the redistributed routes of OSPF. Syntax display ospf [ process-id ] asbr-summary [ ip-address mask ] Parameters process-id OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes. ip-address Matched IP address, in dotted decimal notation.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf asbr-summary ● 107 Description If the parameters are not configured, the summary information of all redistributed routes will be viewed.
108 ● display ospf brief 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf brief Purpose Use the display ospf brief command to view the summary of OSPF. Syntax display ospf [ process-id ] brief Parameters process-id Example Display the OSPF summary. Process ID of OSPF. If no process ID is specified, this command displays the main information of all OSPF processes in configuration sequence.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf brief ● 109 Table 17 Description on the fields of the display ospf brief command Field Description RouterID Router ID of this router Border Router The knowledge that this router has about the ABRs and ASBRs connected to this area spf-schedule-interval SPF calculation interval Authtype OSPF authentication type Routing preference OSPF routing preference.
110 ● display ospf cumulative 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf cumulative Purpose Use the display ospf cumulative command to view the OSPF cumulative information. Syntax display ospf [ process-id ] cumulative Parameters process-id Example Display the OSPF cumulative information. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf cumulative ● 111 Table 18 Description on the fields of the display ospf cumulative command Field IO Statistics Type Type of input and output OSPF packets Input Number of the received packets Output Number of the sent packets ASE Sum of ASE LSAs checksum sum Checksum of ASE LSA LSAs originated Number of self-generated LSAs received Number of the LSAs received from other routers Router Number of Router LSAs SumNe
112 ● display ospf error 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf error Purpose Use the display ospf error command to view the statistics of error information which OSPF received. Syntax display ospf [ process-id ] error Parameters process-id Example Display the statistics of error information which OSPF received. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf error ● 113 Table 19 Description on the fields of the display ospf error command (continued) View Field Description OSPF: wrong authentication key OSPF authentication key error OSPF: too small packet OSPF packet too small OSPF: packet size > ip length OSPF packet size exceeds IP packet length OSPF: transmit error OSPF transmission error OSPF: interface down OSPF interface is down and thus unavailable OSPF: unknown
114 ● display ospf interface 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf interface Purpose Use the display ospf interface command to view the OSPF interface information. Syntax display ospf [ process-id ] interface [ interface-type interface-number ] Parameters process-id interface-type interface-number Example OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes. Specifies an interface by its type and number.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf interface ● 115 Table 20 Description on the fields of the display ospf interface command Field Description Cost Cost of the interface State State of the interface state machine Type OSPF network type on the interface Priority Priority of the interface for DR election in its network Designated Router DR on the network in which the interface resides Backup Designated Router BDR on the network in which the interface re
116 ● display ospf lsdb 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf lsdb Purpose Use the display ospf lsdb command to view the database information about OSPF connecting state. Syntax display ospf [ process-id ] [ area-id ] lsdb [ brief | asbr | ase | network | nssa | opaque { area-local | as | link-local } | router | summary ] [ ip-address ] [ originate-router ip-address ] [ self-originate ] Parameters process-id OSPF process ID.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf lsdb ● 117 Net 10.153.17.89 2.2.2.2 465 32 80000004 0 SpfTree SNet 10.153.18.0 1.1.1.1 355 28 80000003 10 Inter List Area: 0.0.0.1 Type LinkState ID AdvRouter Age Len Sequence Metric Where Rtr 1.1.1.1 1.1.1.1 449 36 80000004 0 SpfTree Rtr 3.3.3.3 3.3.3.3 429 36 8000000a 0 Clist Net 10.153.18.89 3.3.3.3 429 32 80000003 0 SpfTree SNet 10.153.17.0 1.1.1.1 355 28 80000003 10 Inter List ASB 2.2.2.21.1.1.
118 ● display ospf lsdb 3Com Router 5000 Family and Router 6000 Family Command Reference Table 22 Description on the fields of the display ospf lsdb command View Field Description type Type of the LSA ls id Link state ID of the LSA adv rtr Router ID of the router originating the LSA ls age Age of the LSA in seconds len Length of the LSA seq# Sequence number of the LSA chksum Checksum of the LSA Options Options of the LSA Net mask Network mask E type Type of external route Forwardin
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf memory ● 119 display ospf memory Purpose Use the display ospf memory command to view memory occupation status for LSAs. Syntax display ospf memory Parameters None. Example Display memory occupation status for LSAs. <3COM> display ospf memory OSPF Process 1 with Router ID 2.2.2.2 LSDB Memory ASE LSA - count: 0, memory: 0 byte Area: 0.0.0.
120 ● display ospf nexthop 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf nexthop Purpose Use the display ospf nexthop command to view the information about the next-hop Syntax display ospf [ process-id ] nexthop Parameters process-id Example Display the OSPF next-hop information. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes. <3Com > display ospf nexthop OSPF Process 1 with Router ID 2.2.2.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf peer ● 121 display ospf peer Purpose Use the display ospf peer command to view the information about the neighbors in OSPF areas. Use the display ospf peer brief command to view the brief information of neighbors in OSPF, mainly the neighbor number at all states in every area. Syntax display ospf [ process-id ] peer [ brief ] Parameters process-id OSPF process ID.
122 ● display ospf peer 3Com Router 5000 Family and Router 6000 Family Command Reference Table 24 Description on the fields of the display ospf peer command Field Description RouterID Router ID of the neighbor router Address Address of the interface, through which the neighbor router communicates with the router State State of adjacency Mode Master/slave mode formed through negotiation duing DD packet exchange Priority Priority of the neighbor in DR/BDR election DR IP address of the interface
3Com Router 5000 Family and Router 6000 Family Command Reference Description display ospf peer ● 123 The display format of OSPF neighbor valid time is different according to the length of time.
124 ● display ospf request-queue 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf request-queue Purpose Use the display ospf request-queue command to view the information about the OSPF request-queue. Syntax display ospf [ process-id ] request-queue Parameters process-id Example View the information about the OSPF request-queue. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf retrans-queue ● 125 display ospf retrans-queue Purpose Use the display ospf retrans-queue command to view the information about the OSPF retransmission queue. Syntax display ospf [ process-id ] retrans-queue Parameters process-id Example View the information about the OSPF retransmission queue. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes.
126 ● display ospf routing 3Com Router 5000 Family and Router 6000 Family Command Reference display ospf routing Purpose Use the display ospf routing command to view the information about OSPF routing table. Syntax display ospf [ process-id ] routing Parameters process-id Example View the routing table information related to OSPF. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes. <3Com > display ospf routing OSPF Process 1 with Router ID 1.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf vlink ● 127 display ospf vlink Purpose Use the display ospf vlink command to view the information about OSPF virtual links. Syntax display ospf [ process-id ] vlink Parameters process-id Example View OSPF virtual links information. OSPF process ID. If no process ID is specified, the command takes effect on all OSPF processes. <3Com > display ospf vlink OSPF Process 1 with Router ID 1.1.1.
128 ● display rip 3Com Router 5000 Family and Router 6000 Family Command Reference display rip Purpose Use the display rip command to view the current RIP running state and its configuration information. Syntax display rip Parameters None Example Display the current running state and configuration information of the RIP protocol.
3Com Router 5000 Family and Router 6000 Family Command Reference display rip interface ● 129 display rip interface Purpose Use the display rip interface command to display information about the specified RIP interface or all RIP interface. Syntax display rip interface [ vpn-instance vpn-instance-name ] Parameters vpn-instance vpn-instance-name Example Specifies a VPN by its name. Display information about all RIP interfaces.
130 ● display rip routing 3Com Router 5000 Family and Router 6000 Family Command Reference display rip routing Purpose Use the display rip routing command to display the RIP routing table, including normal routes and routes in garbage-collection status. Syntax display rip routing [vpn-instance vpn-instance-name] Parameters vpn-instance vpn-instance-name Example Specifies the name of the VPN. Display RIP routes.
3Com Router 5000 Family and Router 6000 Family Command Reference display rip vpn-instance ● 131 display rip vpn-instance Purpose Use the display rip vpn-instance command to view the related configuration of VPN instance of RIP. Syntax display rip vpn-instance vpn-instance-name Parameters vpn-instance vpn-instance-name VPN instance name.
132 ● display route-policy 3Com Router 5000 Family and Router 6000 Family Command Reference display route-policy Purpose Use the display route-policy command to view the configured route-policy Syntax display route-policy [ route-policy-name ] Parameters route-policy-name Example Display the information of route-policy named policy1. Specifies displayed route-policy name.
3Com Router 5000 Family and Router 6000 Family Command Reference domain-authentication-mode ● 133 domain-authentication-mode Purpose Use the domain-authentication-mode command to configure IS-IS route area to authenticate the received Level-2 routing packets (LSP, CSNP, PSNP), according to the pre-defined mode and password. Use the undo domain-authentication-mode command to configure IS-IS not to authenticate the said packets.
134 ● filter-policy 3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy Purpose Use the filter-policy export command to configure the filtering conditions of the routing information advertised by a certain type of routing protocols. Use the undo filter-policy export command to cancel the filtering conditions set.
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy export ● 135 filter-policy export Purpose Use the filter-policy export command to configure OSPF to filter the LSAs of redistributed routes for advertisement. Use the undo filter-policy export command to cancel the filtering rules that have been set.
136 ● filter-policy export 3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy export Purpose Use the filter-policy export command to configure IS-IS to filter all redistributed routes or routes redistributed from a specified routing protocol. Use the undo filter-policy export command to disable IS-IS to filter all redistributed routes or routes redistributed from a specified routing protocol.
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy export ● 137 filter-policy export Purpose Use the filter-policy export command to filter the advertised routes and only the routes passing the filter can be advertised by BGP. Use the undo filter-policy export command to cancel the filtering to the advertised routes.
138 ● filter-policy export 3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy export Purpose Use the filter-policy export command to configure to filter the advertised routing information by RIP. Use the undo filter-policy export command to configure not to filter the advertised routing information.
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy gateway ● 139 filter-policy gateway Purpose Use the filter-policy gateway import command to filter the routing information advertised by a specified router. Use the undo filter-policy gateway import command to cancel the setting of the filtering condition. Use the filter-policy import command to configure the condition for filtering the routing information.
140 ● filter-policy gateway Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy import
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy import ● 141 filter-policy import Purpose Use the filter-policy import command to configure the OSPF rules of filtering the routing information received. Use the undo filter-policy import command to cancel the filtering of the routing information received. Use the filter-policy import command to filter the routes calculated by OSPF. Only the filtered routes can be added to the routing table.
142 ● filter-policy import Description 3Com Router 5000 Family and Router 6000 Family Command Reference In some cases, it may be required that only the routing information meeting some conditions can be received. Then, the filter-policy command can be used to set the filtering conditions for the routing information to be advertised. Only the routing information passed the filtration can be received.
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy import ● 143 filter-policy import Purpose Use the filter-policy import command to configure to filter the routes received by IS-IS. Use the undo filter-policy import command to configure not to filter the received routes. Syntax filter-policy acl-number import undo filter-policy acl-number import Parameters acl-number Default By default, IS-IS does not filter the received routing information.
144 ● filter-policy import 3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy import Purpose Use the filter-policy gateway import command to filter the learned routing information advertised by the specified address. Use the undo filter-policy gateway import command to remove the filtering to the routing information advertised by the specified address. Use the filter-policy import command to filter the received global routing information.
3Com Router 5000 Family and Router 6000 Family Command Reference filter-policy import ● 145 filter-policy import Purpose Use the filter-policy gateway command to configure to filter the received routing information distributed from the specified address. Use the undo filter-policy gateway command to configure not to filter the received routing information distributed from the specified address. Use the filter-policy import command to configure the filtering to the received global routing information.
146 ● filter-policy import Description Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference The range of the routes received by RIP can be controlled by specifying the access control list and the address prefix list.
3Com Router 5000 Family and Router 6000 Family Command Reference group ● 147 group Purpose Use the group command to create a peer group. Use the undo group command to delete the configured peer group. Syntax group group-name { [ internal ] | external } undo group group-name Parameters group-name Specifies the name of the peer group. It can be an alphanumeric string with the length ranging from 1 to 47. internal Creates an internal peer group.
148 ● host-route 3Com Router 5000 Family and Router 6000 Family Command Reference host-route Purpose Use the host-route command to control the RIP to accept the host route. Use the undo host-route command to reject the host route. Syntax host-route undo host-route Parameters None Default By default, router accepts the host route. Example Configure RIP to reject a host route.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match acl ● 149 if-match acl Purpose Use the if-match acl command to configure the IP address range to match the route-policy. Use the undo if-match acl command to cancel the setting of the match rule. Syntax if-match acl acl-number undo if-match [ acl acl-number ] Parameters Example acl-number Specifies the number of the access control list used for filtering.
150 ● if-match as-path 3Com Router 5000 Family and Router 6000 Family Command Reference if-match as-path Purpose Use the if-match as-path command to filter BGP routing information. Use the undo if-match as-path command to disable the configuration. Syntax if-match as-path aspath-acl-number undo if-match as-path Parameters aspath-acl-number Default By default, Route-policy does not require for matching with the AS path list.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match community ● 151 if-match community Purpose Use the if-match community command to configure the community list number to be matched in route-policy. Use the undo if-match community command to cancel the configuration of the matched community list number.
152 ● if-match cost 3Com Router 5000 Family and Router 6000 Family Command Reference if-match cost Purpose Use the if-match cost command to configure one of the matching rules of route-policy to match the cost of the routing information. Use the undo if-match cost command to cancel the configuration of the matching rule. Syntax if-match cost value undo if-match cost Parameters value Default By default, no if-match clause is defined.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match interface ● 153 if-match interface Purpose Use the if-match interface command to match the route whose next hop is designated interface. Use the undo if-match interface command to cancel the setting of match condition. Syntax if-match interface interface-type interface-number undo if-match interface Parameters interface-type Specifies the type of the interface. interface-number Specifies the number of the interface.
154 ● if-match ip next-hop 3Com Router 5000 Family and Router 6000 Family Command Reference if-match ip next-hop Purpose Use the if-match ip next-hop command to configure one of the match rules of route-policy on the next hop address of the routing information. Use the undo if-match ip next-hop command to cancel the setting of match condition.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ if-match interface ■ if-match acl ■ if-match ip-prefix ■ if-match cost ■ if-match tag ■ route-policy ■ apply ip-address ■ apply cost ■ apply local-preference ■ apply origin ■ apply tag if-match ip next-hop ● 155
156 ● if-match ip-prefix 3Com Router 5000 Family and Router 6000 Family Command Reference if-match ip-prefix Purpose Use the if-match ip-prefix command to configure one of the match rules of route-policy on the IP address range of the routing information. Use the undo if-match ip next-hop command to cancel the setting of match condition.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match tag ● 157 if-match tag Purpose Use the if-match tag command to match the tag field of OSPF route information. Use the undo if-match tag command to cancel the existing matching rules. Syntax if-match tag value undo if-match tag Parameters value Example Display how to define one if-match clause and enable the OSPF route information whose tag field is 8 to pass the if-match clause. Specifies the required tag value.
158 ● if-match tag Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ if-match interface ■ if-match acl ■ if-match ip-prefix ■ if-match ip next-hop ■ if-match cost ■ route-policy ■ apply ip-address ■ apply cost ■ apply local-preference ■ apply origin ■ apply tag
3Com Router 5000 Family and Router 6000 Family Command Reference ignore-lsp-checksum-error ● 159 ignore-lsp-checksum-error Purpose Use the ignore-lsp-checksum-error command to configure the IS-IS to ignore the checksum error of LSP. Use the undo ignore-lsp-checksum-error command to configure the IS-IS not to ignore the checksum error of LSP. Syntax ignore-lsp-checksum-error undo ignore-lsp-checksum-error Parameters None Default By default, the checksum error of LSP is not ignored.
160 ● import-route 3Com Router 5000 Family and Router 6000 Family Command Reference import-route Purpose Use the import-route command to configure IS-IS to filter the redistributed routes. Use the undo import-route command to configure IS-IS not to redistribute the routing information of other protocols.
3Com Router 5000 Family and Router 6000 Family Command Reference Description import-route ● 161 For IS-IS, the routes discovered by other routing protocols are processed as the routes outside the routing domain. When redistributing the routes of other protocols, you can specify the default cost for them. If OSPF routes are redistributed, you can also specify the cost type for them. When IS-IS redistributes routes, you can specify to redistribute the routes to Level-1, Level-2 or Level-1-2.
162 ● import-route 3Com Router 5000 Family and Router 6000 Family Command Reference import-route Purpose Use the import-route command to redistribute routes from other protocols. Use the undo import-route command to disable the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference import-route ● 163 import-route Purpose Use the import-route command to redistribute the routes of other protocols into RIP. Use the undo import-route command to cancel the routes redistributed from other protocols. Syntax import-route protocol [ allow-ibgp ] [ cost value ] [ route-policy route-policy-name ] undo import-route protocol Parameters protocol Specifies the source routing protocol to be redistributed by RIP.
164 ● import-route Description 3Com Router 5000 Family and Router 6000 Family Command Reference The import-route command is used to redistribute the route of another protocol by using a certain value. RIP regards the redistributed route as its own route and transmits it with the specified value. This command can greatly enhance the RIP capability of obtaining routes, thus increasing the RIP performance. If the cost value is not specified, routes will be redistributed according to the default cost.
3Com Router 5000 Family and Router 6000 Family Command Reference import-route ● 165 import-route Purpose Use the import-route command to redistribute the information of another routing protocol. Use the undo import-route command to cancel the redistributed external routing information.
166 ● import-route Example 3Com Router 5000 Family and Router 6000 Family Command Reference Specify an redistributed RIP route as the route of type 2, with the route tag as 33 and the route cost as 50. [3Com -ospf-1] import-route rip type 2 tag 33 cost 50 Specify OSPF process 100 to redistribute the route found by OSPF 160.
168 ● ip as-path-acl 3Com Router 5000 Family and Router 6000 Family Command Reference ip as-path-acl Purpose Use the ip as-path-acl command to configure an AS path regular expression. Use the undo ip as-path-acl command to disable the defined regular expression. Syntax ip as-path-acl aspath-acl-number { permit | deny } as-regular-expression undo ip as-path-acl aspath-acl-number Parameters aspath-acl-number Number of AS path list ranging from 1 to 199.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ System view Description The configured AS path list can be used in BGP policy.
170 ● ip community-list 3Com Router 5000 Family and Router 6000 Family Command Reference ip community-list Purpose Use the ip community-list command to configure a BGP community list. Use the undo ip community-list command to delete the configured BGP community list.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ apply community ■ display bgp routing community-list ip community-list ● 171
172 ● ip ip-prefix 3Com Router 5000 Family and Router 6000 Family Command Reference ip ip-prefix Purpose Use the ip ip-prefix command to configure an address prefix list or one of its items. Use the undo ip ip-prefix command to delete an address prefix list or one of its items.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description ip ip-prefix ● 173 System view The address prefix list is used for IP address filtering. An address prefix list may contain several items, and each item specifies one address prefix range. The inter-item filtering relation is "OR", i.e. passing an item means passing the filtering of this address prefix list.
174 ● ip route-static 3Com Router 5000 Family and Router 6000 Family Command Reference ip route-static Purpose Use the ip route-static command to configure a static route. Use the undo ip route-static command to cancel the configured static route. Use the undo ip route-static command to delete all the static routes to the same destination through the same next hop. Use the undo ip route-static preference command to delete the static routes with the specified preference.
3Com Router 5000 Family and Router 6000 Family Command Reference ip route-static ● 175 nexthop-address Specifies the next hop IP address (in dotted decimal notation) of the static route. preference-value Preference level of the static route in the range from 1 to 255. public Public network. reject Indicates an unreachable route. blackhole Indicates a blackhole route. tag tag-value Tag for the static route. It is used for routing policies. description string Description on the static route.
176 ● ip route-static 3Com Router 5000 Family and Router 6000 Family Command Reference address should be established on link layer. In such condition, transmission interface cannot be specified and the next hop IP address should be configured when configuring static route. Related Command ■ VT interface cannot be configured as outbound interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ipv4-family ● 177 ipv4-family Purpose Use the ipv4-family command to enter IPv4 extended address family view of BGP. Use the undo ipv4-family command to remove all configurations in extended address family view and return to IPv4 unicast address family view of BGP. Use the command to enter the IPv4 extended address family view. In this view, parameters related to the address family can be configured for BGP.
178 ● ipv4-family vpn-instance 3Com Router 5000 Family and Router 6000 Family Command Reference ipv4-family vpn-instance Purpose Use the ipv4-family command to enter MBGP address family view of RIP. Use the undo ipv4-family command to cancel all configurations in extended address family view. Syntax ipv4-family [ unicast ] vpn-instance vpn-instance-name undo ipv4-family [ unicast ] vpn-instance vpn-instance-name Parameters Example unicast Unicast address.
3Com Router 5000 Family and Router 6000 Family Command Reference ipv4-family vpnv4 ● 179 ipv4-family vpnv4 Purpose Use the ipv4-family vpnv4 command to enter VPNv4 address family view of BGP. Use the undo ipv4-family vpnv4 command to delete all configurations in VPNv4 address family view and return to IPv4 unicast address family view of BGP.
180 ● is-level 3Com Router 5000 Family and Router 6000 Family Command Reference is-level Purpose Use the is-level command to configure the IS-IS level. Use the undo is-level command to restore the default setting. Syntax is-level { level-1 | level-1-2 | level-2 } undo is-level Parameters level-1 Configures the router to operate at Level-1, only calculate the intra-area routes and maintain the LSDB of L1.
3Com Router 5000 Family and Router 6000 Family Command Reference is-level ● 181 As described in ISIS protocol, there is only one type of PDU Hello message on a point-to-point link, while there are two types of PDU Hello messages on a LAN interface, namely, Level-1 and Level-2. If you have configured different Level-1 and Level-2 authentication passwords on a point-to-point link, the system will have to choose one type of password, since only one type of Hello message exists on a point-to-point link.
182 ● isis 3Com Router 5000 Family and Router 6000 Family Command Reference isis Purpose Use the isis command to enable the corresponding IS-IS routing process and enter the IS-IS view. Use the undo isis command to cancel the specified IS-IS routing process. Syntax isis [ tag ] undo isis [ tag ] Parameters tag Default By default, IS-IS routing process is not started Example Start an IS-IS routing process, in which the system ID is 0000.0000.0002 and the area ID is 01.0001.
3Com Router 5000 Family and Router 6000 Family Command Reference isis authentication-mode ● 183 isis authentication-mode Purpose Use the isis authentication-mode command to configure the IS-IS to authenticate the hello messages of the corresponding level, in the specified mode and with the specified password on the IS-IS interface. Use the undo isis authentication-mode command to cancel the authentication and delete the password at the same time.
184 ● isis authentication-mode Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ area-authentication-mode ■ domain-authentication-mode
3Com Router 5000 Family and Router 6000 Family Command Reference isis circuit-level ● 185 isis circuit-level Purpose Use the isis circuit-level command to configure the link adjacency relationship. Use the undo isis circuit-level command to restore the default setting. Syntax isis circuit-level [ level-1 | level-1-2 | level-2 ] undo isis circuit-level Parameters level-1 Configures only Level-1 adjacency instead of Level-2 one on the current interface.
186 ● isis cost 3Com Router 5000 Family and Router 6000 Family Command Reference isis cost Purpose Use the isis cost command to configure the link cost of this interface when performing SPF calculation. Use the undo isis cost command to restore the default link cost. Syntax isis cost value [ level-1 | level-2 ] undo isis cost [ level-1 | level-2 ] Parameters Example value Specifies the link cost used in the SPF calculation of corresponding level. If no value is specified, the default value is 10.
3Com Router 5000 Family and Router 6000 Family Command Reference isis dis-priority ● 187 isis dis-priority Purpose Use the isis dis-priority command to configure the priority of an interface for the corresponding level DIS election. Use the undo isis dis-priority command to restore the default priority. Syntax isis dis-priority value [ level-1 | level-2 ] undo isis dis-priority [ level-1 | level-2 ] Parameters Example value Specifies the priority when selecting DIS, ranging from 0 to 127.
188 ● isis enable 3Com Router 5000 Family and Router 6000 Family Command Reference isis enable Purpose Use the isis enable command to configure this interface to activate the corresponding IS-IS routing process. Use the undo isis enable command to cancel this designation. Syntax isis enable [ tag ] undo isis enable [ tag ] Parameters tag Default By default, the IS-IS routing process is not enabled on an interface.
3Com Router 5000 Family and Router 6000 Family Command Reference isis mesh-group ● 189 isis mesh-group Purpose Use the isis mesh-group command to add an interface to a specified mesh group. Use the undo isis mesh-group command to cancel this interface from the mesh group. Syntax isis mesh-group [ mesh-group-number | mesh-blocked ] undo isis mesh-group Parameters mesh-group-number Specifies the mesh group number, ranging from 1 to 4294967295.
190 ● isis small-hello 3Com Router 5000 Family and Router 6000 Family Command Reference isis small-hello Purpose Use the isis small-hello command to disable IS-IS to stuff Hello packets to the size of interface MTU if their data sizes are smaller. Use the undo isis small-hello command to restore the default to have IS-IS stuff Hello packets to the size of interface MTU if their data sizes are smaller.
3Com Router 5000 Family and Router 6000 Family Command Reference isis timer csnp ● 191 isis timer csnp Purpose Use the isis timer csnp command to configure the interval of sending CSNP packets on the broadcast network. Use the undo isis timer csnp command to restore the default value, that is, 10 seconds.
192 ● isis timer hello 3Com Router 5000 Family and Router 6000 Family Command Reference isis timer hello Purpose Use the isis timer hello command to configure the interval of sending hello message of corresponding level. Use the undo isis timer hello command to restore the default value, that is, 10 seconds. Syntax isis timer hello seconds [ level-1 | level-2 ] undo isis timer hello [ level-1 | level-2 ] Parameters seconds Specifies the Hello message interval (in seconds). Valid values are 3 to 255.
3Com Router 5000 Family and Router 6000 Family Command Reference isis timer holding-multiplier ● 193 isis timer holding-multiplier Purpose Use the isis timer holding-multiplier command to configure the number of invalid Hello messages for the interface. Use the undo isis timer holding-multiplier command to restore the default settings.
194 ● isis timer lsp 3Com Router 5000 Family and Router 6000 Family Command Reference isis timer lsp Purpose Use the isis timer lsp command to configure minimum IS-IS LSP interval on the interface. Use the undo isis timer lsp command to restore the default setting. Syntax isis timer lsp time undo isis timer lsp Parameters time Example Set the LSP interval on Interface serial1/0/0 to 500 milliseconds. Specifies the LSP interval (in milliseconds). Valid values are 1 to 1000.
3Com Router 5000 Family and Router 6000 Family Command Reference isis timer retransmit ● 195 isis timer retransmit Purpose Use the isis timer retransmit command to configure the LSP retransmission interval over the point-to-point link. Use the undo isis timer retransmit command to restore the default setting. Syntax isis timer retransmit seconds undo isis timer retransmit Parameters seconds Example Set the LSP retransmission interval to 10 seconds on Interface serial1/0/0.
196 ● loadbandwidth 3Com Router 5000 Family and Router 6000 Family Command Reference loadbandwidth Purpose Use the loadbandwidth command to allocate load bandwidth to the interface. Use the undo loadbandwidth to restore the default load bandwidth of the interface, that is, the physical bandwidth. Syntax loadbandwidth bandwidth undo loadbandwidth Parameters bandwidth Example Configure the bandwidth for load sharing on interface Ethernet 0/0/0. Load bandwidth (in kbps) on the current interface.
3Com Router 5000 Family and Router 6000 Family Command Reference log-peer-change ● 197 log-peer-change Purpose Use the log-peer-change command to turn on the BGP adjacency changes output switch. Use the undo log-peer-change command to turn off the BGP adjacency changes output switch. Syntax log-peer-change undo log-peer-change Parameters None Default By default, BGP adjacency changes output switch is turned off. Example Turn on the BGP adjacency changes output switch on the current router.
198 ● log-peer-change 3Com Router 5000 Family and Router 6000 Family Command Reference log-peer-change Purpose Use the log-peer-change command to configure to log the IS-IS adjacency changes. Use the undo log-peer-change command to configure not to log the IS-IS adjacency changes. Syntax log-peer-change undo log-peer-change Parameters None Default By default, IS-IS adjacency changes log is disabled. Example Configure to log the IS-IS adjacency changes on the current router.
3Com Router 5000 Family and Router 6000 Family Command Reference log-peer-change ● 199 log-peer-change Purpose Use the log-peer-change command to turn on the OSPF adjacency changes output switch for the current OSPF process. Use the undo log-peer-change command to turn off the OSPF adjacency changes output switch. Syntax log-peer-change undo log-peer-change Parameters None Default By default, OSPF adjacency changes output switch is turned off.
200 ● md5-compatible 3Com Router 5000 Family and Router 6000 Family Command Reference md5-compatible Purpose Use the md5-compatible command to configure ISIS to use the 3Com-compatible MD5 algorithm. You need to use this command when MD5 authentication on ISIS is required between your router and a 3Com device. Use the undo md5-compatible command to restore the default MD5 algorithm.
3Com Router 5000 Family and Router 6000 Family Command Reference memory ● 201 memory Purpose Use the memory command to configure the safety value and lower limit of the router idle memory. When the idle memory of the router is less than the lower limit, all the routing protocol connections will be disconnected forcibly.
202 ● memory Description Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference Note that limit-value must be less than safety-value; otherwise, the configuration will fail.
3Com Router 5000 Family and Router 6000 Family Command Reference memory auto-establish disable ● 203 memory auto-establish disable Purpose Use the memory auto-establish disable command to disable the function of restoring the connections of all the routing protocols (even if the idle memory reduces to a safety value). Use the memory auto-establish disable command to disable the above function.
204 ● memory auto-establish enable 3Com Router 5000 Family and Router 6000 Family Command Reference memory auto-establish enable Purpose Use the memory auto-establish enable command to resume connections of all the routing protocols when the idle memory of the router recovers to a safety value. Use the memory auto-establish disable command to disable the above function. Use the memory auto-establish enable command to enable the above function again. By default, the function is always enabled.
3Com Router 5000 Family and Router 6000 Family Command Reference multi-path-number ● 205 multi-path-number Purpose Use the multi-path-number command to configure maximum number of OSPF equal-cost routes. Use the undo multi-path-number command to restore the default. Syntax multi-path-number number undo multi-path-number Parameters number Example Set the number of OSPF equal-cost routes to 2. Number of equal-cost routes. Valid values are 1 to 3. If no value is specified, the default is 3.
206 ● network 3Com Router 5000 Family and Router 6000 Family Command Reference network Purpose Use the network command to configure the interface running OSPF. Use the undo network command to cancel the interface running OSPF. Syntax network ip-address wildcard undo network ip-address wildcard Parameters ip-address Address of the network segment where the interface locates. wildcard IP address wildcard mask, which is similar to the reversed form of the mask of IP address.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description network ● 207 OSPF Area view To run the OSPF protocol on one interface, the master IP address of this interface must be in the range of the network segment specified by this command. If only the slave IP address of the interface is in the range of the network segment specified by this command, this interface will not run OSPF protocol.
208 ● network 3Com Router 5000 Family and Router 6000 Family Command Reference network Purpose Use the network command to configure the network routes advertised by the local BGP system. Use the undo network command to cancel the existing configuration. Syntax network ip-address [ address-mask ] [ route-policy route-policy-name ] undo network ip-address [ address-mask ] [ route-policy route-policy-name ] Parameters ip-address Network address for BGP to advertise.
3Com Router 5000 Family and Router 6000 Family Command Reference network ● 209 network Purpose Use the network command to enable Routing Information Protocol (RIP) on the interface. Use the undo network command to cancel the RIP on the interface. Syntax network network-address undo network network-address Parameters network-address Address of the network enabled/disabled. It can be IP network address of any interface.
210 ● network-entity 3Com Router 5000 Family and Router 6000 Family Command Reference network-entity Purpose Use the network-entity command to configure the name of Network Entity Title (NET) of the IS-IS routing process. Use the undo network-entity command to cancel a NET. Syntax network-entity net undo network-entity net Parameters net Default By default, the value is No NET. Example Specify NET as “10.0001.1010.1020.1030.00”, in which the system ID is “1010.1020.1030”, area ID is “10.0001”.
3Com Router 5000 Family and Router 6000 Family Command Reference nssa ● 211 nssa Purpose Use the nssa command to configure an area as NSSA area. Use the undo nssa command to cancel the function. Syntax nssa [ default-route-advertise ] [ no-import-route ] [ no-summary ] undo nssa Parameters default-route-advertise Only available for the NSSA ABR or ASBR. When using the parameter at NSSA ABR to generate Type-7 LSAs for the default route no matter whether there exists the default route 0.0.0.
212 ● opaque-capability 3Com Router 5000 Family and Router 6000 Family Command Reference opaque-capability Purpose Use the opaque-capability enable command to enable the Opaque capability of OSPF. Use the undo opaque-capability command to disable the Opaque capability of OSPF. Syntax opaque-capability enable undo opaque-capability Parameters None Example Enable Opaque capability.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf ● 213 ospf Purpose Use the ospf command to enable the OSPF protocol. Use the undo ospf command to disable the OSPF protocol. Syntax ospf [ process-id [ [ router-id router-id ] vpn-instance vpn-instance-name ] ] undo ospf [ process-id ] Parameters process-id Number of an OSPF process. If no process number is specified the default number 1 is used. router-id Router ID employed by the OSPF process, in dotted decimal notation.
214 ● ospf Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference network
3Com Router 5000 Family and Router 6000 Family Command Reference ospf authentication-mode ● 215 ospf authentication-mode Purpose Use the ospf authentication-mode command to configure the authentication mode and key between adjacent routers. Use the undo ospf authentication-mode command to cancel the authentication key that has been set.
216 ● ospf cost 3Com Router 5000 Family and Router 6000 Family Command Reference ospf cost Purpose Use the ospf cost command to configure different packet sending costs so as to send packets from different interfaces. Use the undo ospf cost command to restore the default costs. Syntax ospf cost value undo ospf cost Parameters value Default By default, the interface automatically calculates the costs required for running OSPF protocol according to the current Baud rate.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf dr-priority ● 217 ospf dr-priority Purpose Use the ospf dr-priority command to configure the priority for electing the "designated router" on an interface. Use the undo ospf dr-priority command to restore the default value. Syntax ospf dr-priority value undo ospf dr-priority Parameters value Example Set the priority of the interface Ethernet1/0/0 to 8, when electing the DR. Interface priority for electing the "designated router.
218 ● ospf mib-binding 3Com Router 5000 Family and Router 6000 Family Command Reference ospf mib-binding Purpose Use the ospf mib-binding command, MIB operation can be bound on the specified OSPF process. Use the undo ospf mib-binding command to restore the default configuration. Syntax ospf mib-binding process-id undo ospf mib-binding Parameters process-id Default By default, MIB operation is bound on the first enabled OSPF process. Example Bind MIB operation on OSPF process 100.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf mtu-enable ● 219 ospf mtu-enable Purpose Use the ospf mtu-enable command to enable the interface to write MTU value when sending DD packets. Use the undo ospf mtu-enable command to restore the default settings. Syntax ospf mtu-enable undo ospf mtu-enable Parameters None Default By default, the MTU value is 0 when sending DD packets, that is, the actual MTU value of the interface is not written.
220 ● ospf network-type 3Com Router 5000 Family and Router 6000 Family Command Reference ospf network-type Purpose Use the ospf network-type command to configure the network type of OSPF interface. Use the undo ospf network-type command to restore the default network type of the OSPF interface. Syntax ospf network-type { broadcast | nbma | p2mp | p2p } undo ospf network-type Parameters Example broadcast Changes the interface network type to broadcast.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf network-type ● 221 connects any two routers on the network. In other words, the network is full-meshed. If the network cannot satisfy this condition, the interface network type must be changed to point-to-multipoint. In this way, these two routers can exchange routing information via a router directly connected with the two routers.
222 ● ospf timer dead 3Com Router 5000 Family and Router 6000 Family Command Reference ospf timer dead Purpose Use the ospf timer dead command to configure the dead interval of the OSPF neighbor. Use the undo ospf timer dead command to restore the default value of the dead interval of the neighbor.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf timer hello ● 223 ospf timer hello Purpose Use the ospf timer hello command to configure the interval for transmitting Hello messages on an interface. Use the undo ospf timer hello command to restore the default value.
224 ● ospf timer poll 3Com Router 5000 Family and Router 6000 Family Command Reference ospf timer poll Purpose Use the ospf timer poll command to configure the poll Hello message interval on nbma and p2mp network. Use the undo ospf timer poll command to restore the default value. Syntax ospf timer poll seconds undo ospf timer poll Parameters seconds Example Configure to transmit poll Hello message from interface serial2/0/0 every 130 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf timer retransmit ● 225 ospf timer retransmit Purpose Use the ospf timer retransmit command to configure the interval for LSA re-transmitting on an interface. Use the undo ospf timer retransmit command to restore the default interval value for LSA re-transmitting on the interface.
226 ● ospf trans-delay 3Com Router 5000 Family and Router 6000 Family Command Reference ospf trans-delay Purpose Use the ospf trans-delay command to configure the LSA transmitting delay on an interface. Use the undo ospf trans-delay command to restore the default value of the LSA transmitting delay on an interface. Syntax ospf trans-delay seconds undo ospf trans-delay Parameters seconds Example Specify the trans-delay of transmitting LSA on the interface serial1/0/0 as 3 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference peer ● 227 peer Purpose Use the peer command to configure the IP address of adjacent routers and specify a DR priority on an NBMA network. Use the undo peer command to cancel the configuration. Syntax peer ip-address [ dr-priority dr-priority-number ] undo peer ip-address Parameters Example ip-address IP address of the neighboring point. dr-priority-number Represents the corresponding value of the network neighbor priority.
228 ● peer 3Com Router 5000 Family and Router 6000 Family Command Reference peer Purpose Use the peer command to configure the destination address of the peer to which information is sent in unicast mode. Use the undo peer command to cancel the set destination address. Syntax peer ip-address undo peer ip-address Parameters ip-address Default By default, do not send RIP packet to any destination. Example Specify the sending destination address 202.38.165.1.
3Com Router 5000 Family and Router 6000 Family Command Reference peer advertise-community ● 229 peer advertise-community Purpose Use the peer advertise-community command to enable the transmission of community attributes to a peer group. Use the undo peer advertise-community command to cancel the existing configuration.
230 ● peer allow-as-loop 3Com Router 5000 Family and Router 6000 Family Command Reference peer allow-as-loop Purpose Use the peer allow-as-loop command to configure the repeating times of the local AS number. Use the undo peer allow-as-loop command to cancel the configuration. Syntax peer { group-name | peer-address } allow-as-loop [ number ] undo peer { group-name | peer-address } allow-as-loop Parameters Example group-name Specifies the name of the peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference peer as-number ● 231 peer as-number Purpose Use the peer as-number command to specify an AS number for a peer group. Use the undo peer as-number command to delete the AS number of a peer group. Syntax peer group-name as-number as-number undo peer group-name as-number as-number Parameters group-name Specifies the name of the peer group. as-number Peer AS number of the peer group. Valid values are 1 to 65,535.
232 ● peer as-path-acl 3Com Router 5000 Family and Router 6000 Family Command Reference peer as-path-acl Purpose Use the peer as-path-acl command to specify BGP route filtering policy based on AS path list for a peer/peer group. Use the undo peer as-path-acl command to cancel the existing configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference peer connect-interface ● 233 peer connect-interface Purpose Use the peer connect-interface command to specify the source interface for route updates. Use the undo peer connect-interface command to restore the best source interface.
234 ● peer default-route-advertise 3Com Router 5000 Family and Router 6000 Family Command Reference peer default-route-advertise Purpose Use the peer default-route-advertise command to redistribute a default route to a peer group. Use the undo peer default-route-advertise command to cancel the existing configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference peer description ● 235 peer description Purpose Use the peer description command to configure the description information of the peer/peer group. Use the undo peer description command to remove the description information of the peer/peer group. Syntax peer { group-name | peer-address } description description-line undo peer { group-name | peer-address } description Parameters group-name Specifies the name of the peer group.
236 ● peer ebgp-max-hop 3Com Router 5000 Family and Router 6000 Family Command Reference peer ebgp-max-hop Purpose Use the peer ebgp-max-hop command to allow establishing EBGP connection with a neighbor on an indirectly connected network. Use the undo peer ebgp-max-hop command to cancel the existing configuration. Syntax peer group-name ebgp-max-hop [ ttl ] undo peer group-name ebgp-max-hop Parameters group-name Specifies the name of the peer group. ttl Specifies the maximum hop count.
3Com Router 5000 Family and Router 6000 Family Command Reference peer enable ● 237 peer enable Purpose Use the peer enable command to enable the specified peer (group). Use the undo peer enable command to disable the specified peer (group). Syntax peer { group-name | peer-address } enable undo peer { group-name | peer-address } enable Parameters group-name Specifies the name of the peer group. peer-address Specifies the IP address of the peer.
238 ● peer enable Description 3Com Router 5000 Family and Router 6000 Family Command Reference Note that the peer peer-address enable command can be configured in unicast address family view only. Use this command to disable the unicast function of the peer. You can delete the peer from the group in the corresponding address to disable its multicast function or VPNv4 function. If the specified peer/peer group is disabled, the router will not exchange routing information with the specified peer (group).
3Com Router 5000 Family and Router 6000 Family Command Reference peer filter-policy ● 239 peer filter-policy Purpose Use the peer filter-policy import command to configure BGP to filter routes received from the peer (group) based on the ACL. Use the undo peer filter-policy import command to cancel filtering of the received routes based on the ACL. Use the peer filter-policy export command to configure BGP to filter routes advertised to the peer (group) based on the ACL.
240 ● peer group 3Com Router 5000 Family and Router 6000 Family Command Reference peer group Purpose Use the peer group command to add a peer to a peer group. Use the undo peer group command to delete the specified peer from a peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference peer ip-prefix ● 241 peer ip-prefix Purpose Use the peer ip-prefix import command to configure BGP to filter routes received from the peer/peer group based on the ip-prefix list. Use the undo peer ip-prefix import command to cancel filtering of the received routes based on the ip-prefix list. Use the peer ip-prefix export command to configure BGP to filter routes advertised to the peer/peer group based on the ip-prefix list.
242 ● peer next-hop-local 3Com Router 5000 Family and Router 6000 Family Command Reference peer next-hop-local Purpose Use the peer next-hop-local command to configure the next hop in the route to be advertised to the peer group as the address of the local router. Use the undo peer next-hop-local command to cancel the configuration.
244 ● peer password Description 3Com Router 5000 Family and Router 6000 Family Command Reference Once MD5 authentication is enabled, both parties involved in the authentication must be configured with the exact authentication mode and password. Otherwise, the TCP connection will not be set up because of the failed authentication. This command is used to configure MD5 authentication for a specific peer only when the peer group to which the peer belongs is not configured with MD5 authentication.
3Com Router 5000 Family and Router 6000 Family Command Reference peer public-as-only ● 245 peer public-as-only Purpose Use the peer public-as-only command to configure not to carry the private AS number when transmitting BGP updates. Use the undo peer public-as-only command to configure to carry the private AS number when transmitting BGP updates.
246 ● peer reflect-client 3Com Router 5000 Family and Router 6000 Family Command Reference peer reflect-client Purpose Use the peer reflect-client command to configure a peer group as the route reflector client. Use the undo peer reflect-client command to cancel the existing configuration. Syntax peer group-name reflect-client undo peer group-name reflect-client Parameters group-name Default By default, no route reflector is in AS.
3Com Router 5000 Family and Router 6000 Family Command Reference peer route-policy ● 247 peer route-policy Purpose Use the peer route-policy import command to configure MBGP to filter routes received from the peer (group) based on the route-policy. Use the undo peer route-policy import command to disable the specified route-policy. Use the peer route-policy export command to configure MBGP to filter routes advertised to the peer (group) based on the route-policy.
248 ● peer route-update-interval 3Com Router 5000 Family and Router 6000 Family Command Reference peer route-update-interval Purpose Use the peer route-update-interval command to configure the interval for a peer group to advertise route updates. Use the undo peer route-update-interval command to restore the default value. Syntax peer group-name route-update-interval seconds undo peer group-name route-update-interval Parameters Example group-name Specifies the name of the peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference peer shutdown ● 249 peer shutdown Purpose Use the peer shutdown command to disable the specified BGP peer or peer group to initiate or receive BGP connection or to disconnect a BGP connection that has existed. Use the undo peer shutdown command to restore the default, allowing the peer/peer group to intiate or receive BGP connection.
250 ● peer timer 3Com Router 5000 Family and Router 6000 Family Command Reference peer timer Purpose Use the peer timer command to configure Keepalive and Holdtime intervals for a peer (group). Use the undo peer timer command to restore the default values. Syntax peer { group-name | peer-address } timer keep-alive keepalive-interval hold holdtime-interval undo peer { group-name | peer-address } timer Parameters Example group-name Specifies the name of the peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference preference ● 251 preference Purpose Use the preference command to configure the preference of IS-IS protocol. Use the undo preference command to restore the default value. Syntax preference value undo preference Parameters value Example Configure the preference of IS-IS as 25. Specifies the preference. Valid values are 1 to 255. If no value is specified, the default value is 15.
252 ● preference 3Com Router 5000 Family and Router 6000 Family Command Reference preference Purpose Use the preference command to configure the preference of BGP protocol. Use the undo preference command to restore the default preference. Syntax preference value undo preference Parameters value Example Configure the preference of the BGP protocol to 150. Specifies the preference. Valid values are 1 to 256. If no value is specified, the default value is 170.
3Com Router 5000 Family and Router 6000 Family Command Reference preference ● 253 preference Purpose Use the preference command to configure the preference of an OSPF protocol route. Use the undo preference command to restore the default value of the OSPF protocol route. Syntax preference [ ase ] value undo preference [ ase ] Parameters value OSPF protocol route preference. Valid values are 1 to 255. ase Preference of an redistributed external route of the AS.
254 ● preference 3Com Router 5000 Family and Router 6000 Family Command Reference preference Purpose Use the preference command to configure the route preference of RIP. Use the undo preference command to restore the default preference. Syntax preference value undo preference Parameters value Example Specify the RIP preference as 20. Preference level. Valid values are 1 to 255. If no value is specified, the default value is 100.
3Com Router 5000 Family and Router 6000 Family Command Reference reflect between-clients ● 255 reflect between-clients Purpose Use the reflect between-clients command to enable route reflection between clients. Use the undo reflect between-clients command to disable this function. Syntax reflect between-clients undo reflect between-clients Parameters None Default By default, route reflection between clients is enabled Example Disable the route reflection between clients.
256 ● reflector cluster-id 3Com Router 5000 Family and Router 6000 Family Command Reference reflector cluster-id Purpose Use the reflector cluster-id command to configure the cluster ID of the route reflector. Use the undo reflector cluster-id command to remove the configured cluster ID.
3Com Router 5000 Family and Router 6000 Family Command Reference refresh bgp ● 257 refresh bgp Purpose Use the refresh bgp command to request the peer to retransmit routes or retransmit routes to the peer. Syntax refresh bgp { all | peer-address | { group group-name } } [ multicast | vpnv4 | vpn-instance vpn-instance-name ] { import | export } Parameters all Refreshes all the peers. peer-address Refreshes the peer with the specified address.
258 ● reset 3Com Router 5000 Family and Router 6000 Family Command Reference reset Purpose Use the reset command to reset the system parameters of RIP. Syntax reset Parameters None Example Reset the RIP system. [3Com -rip] reset View This command can be used in the following views: ■ Description RIP view When you need to re-configure parameters of RIP, this command can be used to restore the default setting.
3Com Router 5000 Family and Router 6000 Family Command Reference reset bgp ● 259 reset bgp Purpose Use the reset bgp peer-address command to reset the connection of BGP with a specified peer. Use the reset bgp all command to reset all the BGP connections. Syntax reset bgp { all | peer-address } [ vpn-instance vpn-instance-name ] Parameters all Resets all the BGP connections. peer-address Resets only the connection with the specified BGP peer.
260 ● reset bgp flap-info 3Com Router 5000 Family and Router 6000 Family Command Reference reset bgp flap-info Purpose Use the reset bgp flap-info command to reset the flap statistics of routes.
3Com Router 5000 Family and Router 6000 Family Command Reference reset bgp group ● 261 reset bgp group Purpose Use the reset bgp group command to reset the BGP connections of all the members in the specified peer group. Syntax reset bgp group group-name [ vpn-instance vpn-instance-name ] Parameters group-name vpn-instance vpn-instance-name Example Specifies the name of the peer group, in a string with 1 to 47 characters. Specifies the name of the VPN-INSTANCE. Valid values are 1 to 19.
262 ● reset dampening 3Com Router 5000 Family and Router 6000 Family Command Reference reset dampening Purpose Use the reset dampening command to clear the dampening information and flap statistics of a route and release the suppression of a suppressed route. Syntax reset dampening [ network-address [ mask ] ] Parameters network-address Network IP address related to clearing dampening information. mask Network mask. Example Clear the dampening information of the route to network 20.1.0.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ip routing-table ● 263 reset ip routing-table Purpose Use the reset ip routing-table command to clear the routing table. Syntax reset ip routing-table [ vpn-instance vpn-instance-name ] statistics protocol protocol-type Parameters vpn-instance vpn-instance name Specifies the name of the VPN-instance.
264 ● reset isis all 3Com Router 5000 Family and Router 6000 Family Command Reference reset isis all Purpose Use the reset isis all command to reset all the IS-IS data. Syntax reset isis all Parameters None Example Clear all the IS-IS data. <3Com > reset isis all View This command can be used in the following views: ■ Description Related Commands User view This command is used when LSPs need refreshing immediately.
3Com Router 5000 Family and Router 6000 Family Command Reference reset isis peer ● 265 reset isis peer Purpose Use the reset isis peer command to reset the IS-IS data of specified IS-IS neighbor. Syntax reset isis peer system-id Parameters system-id Example Clear the IS-IS data of neighbor whose system ID is 0000.0c11.1111. Specifiesy the system ID of IS-IS neighbor. <3Com > reset isis peer 0000.0c11.
266 ● reset loadsharing 3Com Router 5000 Family and Router 6000 Family Command Reference reset loadsharing Purpose Use the reset loadsharing command to reset statistics about unbalanced load sharing for all interfaces or the interfaces related to the equal-cost routes to the specified destination network. Syntax reset loadsharing { all | ip address ip-address mask } Parameters all Clears the statistics about unbalanced load sharing for all interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ospf ● 267 reset ospf Purpose Use the reset ospf all command to reset all the OSPF processes. Use the parameter of statistics to reset statistics about OSPF. Use the reset ospf command to reset the OSPF process, the following results are expected: Syntax reset ospf [ statistics ] { all | process-id } Parameters statistics Resets statistics of the OSPF process. process-id OSPF process number.
268 ● rip 3Com Router 5000 Family and Router 6000 Family Command Reference rip Purpose Use the rip command to enable the RIP and enter the RIP view. Use the undo rip command to cancel RIP. Syntax rip undo rip Parameters None Default By default, the system does not run RIP. Example Enable the RIP and enter the RIP view.
3Com Router 5000 Family and Router 6000 Family Command Reference rip authentication-mode ● 269 rip authentication-mode Purpose Use the rip authentication-mode command to configure RIP-2 authentication mode and corresponding parameters. Use the undo rip authentication-mode command to cancel the RIP-2 authentication.
270 ● rip authentication-mode Description 3Com Router 5000 Family and Router 6000 Family Command Reference RIP-1 does not support authentication. There are two RIP authentication modes: simple text authentication and MD5 cipher text authentication. When MD5 cipher text authentication mode is used, there are two types of packet formats. One of them is described in RFC 1723, which was brought forward earlier. The other format is the one described specially in RFC 2082.
3Com Router 5000 Family and Router 6000 Family Command Reference rip input ● 271 rip input Purpose Use the rip input command to allow an interface to receive RIP packets. Use the undo rip input command to cancel an interface to receive RIP packets. Syntax rip input undo rip input Parameters None Default By default, RIP packets at all interfaces (except loopback interface) can be received.. Example Specify the interface serial1/0/0 not to receive RIP packets.
272 ● rip metricin 3Com Router 5000 Family and Router 6000 Family Command Reference rip metricin Purpose Use the rip metricin command to configure the additional route metric added to the route when an interface receives RIP packets. Use the undo rip metricin command to restore the default value of this additional route metric. Syntax rip metricin value undo rip metricin Parameters value Example Specify the additional route metric to 2 when the interface serial1/0/0 receives RIP packets.
3Com Router 5000 Family and Router 6000 Family Command Reference rip metricout ● 273 rip metricout Purpose Use the rip metricout value command to enable RIP to send routes out the interface with an additional route metric added. This command applies to routes both locally learned and learned from other routers. Use the rip metricout value all-route command to enable RIP to send routes out the interface with an additional route metric added.
274 ● rip output 3Com Router 5000 Family and Router 6000 Family Command Reference rip output Purpose Use the rip output command to configure an interface to transmit RIP packets to the external. Use the undo rip output command to cancel an interface to transmit RIP packets to the external. Syntax rip output undo rip output Parameters None Default By default, RIP packets at all interfaces (except loopback interface) can be transmitted.
3Com Router 5000 Family and Router 6000 Family Command Reference rip split-horizon ● 275 rip split-horizon Purpose Use the rip split-horizon command to configure an interface to use split horizon when transmitting RIP packets. Use the undo rip split-horizon command to configure an interface not to use split horizon when transmitting RIP packets.
276 ● rip triggered 3Com Router 5000 Family and Router 6000 Family Command Reference rip triggered Purpose Use the rip triggered command to enable trigger RIP (TRIP). Use the undo rip triggered command to disable TRIP. Syntax rip triggered undo rip triggered Parameters None Example Enable TRIP. [3Com ] serial 6/0/0 [3Com -Serial6/0/0] rip triggered View This command can be used in the following views: ■ Description Interface view TRIP only runs on PPP, frame relay, and X.25.
3Com Router 5000 Family and Router 6000 Family Command Reference rip version ● 277 rip version Purpose Use the rip version command to configure the version of RIP packets on an interface. Use the undo rip version command to restore the default value of RIP packet version on the interface. Syntax rip version { 1| { 2 [ broadcast | multicast ] } } undo rip version Parameters Example 1 Interface version is RIP-1. If no interface RIP version is specified, the default is RIP-1.
278 ● rip work 3Com Router 5000 Family and Router 6000 Family Command Reference rip work Purpose Use the rip work command to enable the running of RIP on an interface. Use the undo rip work command to disable the running of RIP on an interface. Syntax rip work undo rip work Parameters None Default By default, RIP is run on an interface. Example Disable the interface serial1/0/0 to run the RIP.
3Com Router 5000 Family and Router 6000 Family Command Reference route-policy ● 279 route-policy Purpose Use the route-policy command to create and enter route-policy view. Use the undo route-policy command to cancel the established route-policy. Syntax route-policy route-policy-name { permit | deny } node { node-number } undo route-policy route-policy-name [ permit | deny | node node-number ] Parameters route-policy-name Specifies the route-policy name to identify one route-policy uniquely.
280 ● route-policy 3Com Router 5000 Family and Router 6000 Family Command Reference The filtering relation between route-policy nodes is "OR", i.e. passing the filtering of one node means passing the filtering of this route-policy. If the information does not pass the filtering of any nodes, it cannot pass the filtering of this route-policy.
3Com Router 5000 Family and Router 6000 Family Command Reference router id ● 281 router id Purpose Use the router id command to configure the ID of a router running the OSPF protocol. Use the undo router id command to cancel the router ID that has been configured. Syntax router id router-id undo router id Parameters router-id Default By default, no router ID is configured. Example Set the router ID to 10.1.1.3. Router ID that is a 32-bit unsigned integer. [3Com ] router id 10.1.1.
282 ● timer lsp-max-age 3Com Router 5000 Family and Router 6000 Family Command Reference timer lsp-max-age Purpose Use the timer lsp-max-age command to configure the maximum lifetime of an LSP generated by the current router. Use the undo timer lsp-max-age command to restore the default value. Syntax timer lsp-max-age seconds undo timer lsp-max-age Parameters seconds Example Set the lifetime of an LSP generated by the current system to 25 minutes, i.e., 1500 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference timer spf ● 283 timer spf Purpose Use the timer spf command to configure the interval for the SPF calculation. Use the undo timer spf command to restore the default setting. Syntax timer spf seconds [ level-1 | level-2 ] undo timer spf [ level-1 | level-2 ] Parameters seconds Specifies the SPF calculation interval (in seconds). Valid values are 1 to 120. If no value is specified, the default value is 5 seconds.
284 ● set-overload 3Com Router 5000 Family and Router 6000 Family Command Reference set-overload Purpose Use the set-overload command to configure overload flag bit for the current router. Use the undo set-overload command to reset the overload flag bit. Syntax set-overload undo set-overload Parameters None Default By default, no overload bit is set. Example Set overload flag bit on the current router.
3Com Router 5000 Family and Router 6000 Family Command Reference silent-interface ● 285 silent-interface Purpose Use the silent-interface command to disable a specified interface to transmit IS-IS packet. Use the undo silent-interface command to enable the interface to transmit IS-IS packet. Syntax silent-interface interface-type interface-number undo silent-interface interface-type interface-number Parameters interface-type Specifies the interface type.
286 ● silent interface 3Com Router 5000 Family and Router 6000 Family Command Reference silent interface Purpose Use the silent-interface command to disable an interface to transmit OSPF packet. Use the undo silent-interface command to restore the default setting. Syntax silent-interface interface-type interface-number undo silent-interface interface-type interface-number Parameters interface-type Specifies the interface type interface-number Specifies the interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap enable ospf ● 287 snmp-agent trap enable ospf Purpose Use the snmp-agent trap enable ospf command to enable the TRAP function of OSPF. Use the undo snmp-agent trap enable ospf command to disable the TRAP function. Syntax snmp-agent trap enable ospf [ process-id ] [ trap-type ] undo snmp-agent trap enable ospf [ process-id ] [ trap-type ] Parameters process-id OSPF process number.
288 ● snmp-agent trap enable ospf View This command can be used in the following views: ■ Description 3Com Router 5000 Family and Router 6000 Family Command Reference System view This command takes no effect on the OSPF process enabled after its execution. For detailed configuration of SNMP TRAP, refer to “system management” section in this manual.
3Com Router 5000 Family and Router 6000 Family Command Reference spf-delay-interval ● 289 spf-delay-interval Purpose Use the spf-delay-interval command to configure the interval for actively releasing CPU in the SPF calculation. Use the undo spf-delay-interval command to restore the default setting. Syntax spf-delay-interval number undo spf-delay-interval Parameters number Default By default, CPU is released once when every 5000 pieces of routes are processed.
290 ● spf-schedule-interval 3Com Router 5000 Family and Router 6000 Family Command Reference spf-schedule-interval Purpose Use the spf-schedule-interval command to configure the route calculation interval of OSPF. Use the undo spf-schedule-interval command to restore the default setting. Syntax spf-schedule-interval interval undo spf-schedule-interval Parameters Interval Example Set the OSPF route calculation interval of 3Com to 6 seconds. SPF calculation interval of OSPF (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference spf-slice-size ● 291 spf-slice-size Purpose Use the spf-slice-size command to configure whether to set slice and the duration time each time when IS-IS performs SPF route calculation. Use the undo spf-slice-size command to restore the default setting. Syntax spf-slice-size seconds undo spf-slice-size Parameters seconds Example Set the SPF duration time to 1 second. Duration time for SPF calculation each time (in seconds).
292 ● stub 3Com Router 5000 Family and Router 6000 Family Command Reference stub Purpose Use the stub command to configure the type of an OSPF area as the STUB area. Use the undo stub command to cancel the settings. Syntax stub [ no-summary ] undo stub Parameters no-summary Default By default, no area is set to be the STUB area. Example Set the type of OSPF area 1 to the STUB area. Only available for the ABR in Stub area.
3Com Router 5000 Family and Router 6000 Family Command Reference summary ● 293 summary Purpose Use the summary command to configure automatic aggregation of sub-network routes. Use the undo summary command to disable automatic aggregation. Syntax summary undo summary Parameters None Default By default, no automatic aggregation of sub-network routes is executed. Example Configure automatic aggregation of the sub-network routes.
294 ● summary 3Com Router 5000 Family and Router 6000 Family Command Reference summary Purpose Use the summary command to configure IS-IS route summary. Use the undo summary command to cancel the summary. Syntax summary ip-address mask [ level-1 | level-1-2 | level-2 ] undo summary ip-address mask [ level-1 | level-1-2 | level-2 ] Parameters ip-address Address segment of the routes to be aggregated. mask Aggregated route mask. level-1 Aggregates the routes redistributed into Level-1.
3Com Router 5000 Family and Router 6000 Family Command Reference summary ● 295 summary Purpose Use the summary command to enable RIP-2 automatic route summarization. Use the undo summary command to disable RIP-2 automatic route summarization. Syntax summary undo summary Parameters None Default By default, RIP-2 route summarization is enabled. Example Set RIP version on the interface serial1/0/0 as RIP-2 and disable the route summarization function.
296 ● timer keep-alive hold 3Com Router 5000 Family and Router 6000 Family Command Reference timer keep-alive hold Purpose Use the timer keep-alive hold command to configure the Keepalive and Holdtime timer of BGP. Use the undo timer keep-alive hold command to restore the default values of the Keepalive and Holdtime timers.
3Com Router 5000 Family and Router 6000 Family Command Reference timer-lsp-refresh ● 297 timer-lsp-refresh Purpose Use the timer lsp-refresh command to configure the refresh interval of LSP. Use the undo timer lsp-refresh command to restore the default value. Syntax timer lsp-refresh seconds undo timer lsp-refresh Parameters seconds Example Set the LSP refresh interval of the current system to 1500 seconds. Specifies the LSP refresh interval ( in seconds). Valid values are 1 to 65535.
298 ● timers 3Com Router 5000 Family and Router 6000 Family Command Reference timers Purpose Use the timers command to modify value for the three timers, Period update, Timeout and Garbage-collection, of RIP. Use the undo timers command to restore the default setting. Syntax timers { update update-timer-length | timeout timeout-timer-length } * undo timers { update | timeout } * Parameters update-timer-length Period update value (in seconds). Valid values are 1 to 3600.
3Com Router 5000 Family and Router 6000 Family Command Reference traffic-share-across-interface ● 299 traffic-share-across-interface Purpose Use the traffic-share-across-interface command to enable RIP to distribute traffic equally on multiple interfaces using equal-cost routes. Use the undo traffic-share-across-interface command to disable traffic sharing across interfaces.
300 ● undo synchronization 3Com Router 5000 Family and Router 6000 Family Command Reference undo synchronization Purpose Use the undo synchronization command to remove the synchronization between BGP and IBGP.
3Com Router 5000 Family and Router 6000 Family Command Reference validate source address ● 301 validate source address Purpose Use the validate-source-address command to enable checking of the source address of a RIP packet upon reception. Use the undo validate-source-address command to cancel checking of the source address of a RIP packet.This command applies to the RIP protocol both running in public networks and private networks in a MPLS VPN.
302 ● vlink-peer 3Com Router 5000 Family and Router 6000 Family Command Reference vlink-peer Purpose Use the vlink-peer command to create and configure a virtual link. Use the undo vlink-peer command to cancel an existing virtual link. Syntax vlink-peer router-id [ hello seconds] [ retransmit seconds ] [ trans-delay seconds ] [ dead seconds ] [ simple password | md5 keyid key ] undo vlink-peer router-id Parameters router-id Router ID of virtual link neighbor.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 MULTICAST PROTOCOL ALPHABETICAL LISTING OF COMMANDS aggregate 5 bsr-policy 6 cache-sa-enable 8 c-bsr 9 c-rp 10 crp-policy 11 debugging bgp mp-update 13 debugging igmp 14 debugging msdp 15 debugging multicast forwarding 16 debugging multicast kernel-routing 17 debugging multicast status-forwarding 18 debugging pim common 19 debugging pim dm 20 debugging pim sm 21 delete rpf-route-static all 22 display bgp multicast group 23 display bgp mu
2● 3Com Router 5000 Family and Router 6000 Family Command Reference display pim neighbor 51 display pim routing-table 52 display pim rp-info 54 igmp enable 55 igmp group-limit 56 igmp group-policy 57 igmp host-join 58 igmp lastmember-queryinterval 59 igmp max-response-time 61 igmp proxy 62 igmp robust-count 63 igmp timer query 65 igmp timer other-querier-present 66 igmp version 67 import-route 68 import-source 69 ip rpf-longest-match 70 ip rpf-route-static 71 ipv4-family multicast 73 msdp 74 msdp-tracert
3Com Router 5000 Family and Router 6000 Family Command Reference pim 112 pim bsr-boundary 113 pim neighbor-limit 114 pim neighbor-policy 115 pim dm 116 pim sm 117 pim timer hello 118 register-policy 119 reset igmp group 120 reset msdp peer 121 reset msdp sa-cache 122 reset msdp statistics 123 reset multicast forwarding-table 124 reset multicast forwarding-table 126 reset multicast routing-table 128 reset multicast routing-table 129 reset pim neighbor 130 reset pim routing-table 131 shutdown 133 source-poli
4● 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference aggregate ● 5 aggregate Purpose Use the aggregate command to create a multicast aggregated record in the BGP routing table. Use the undo aggregate command to remove the aggregation. Use the aggregate command without parameters to create one local aggregated route and set atomic aggregation attributes.
6 ● bsr-policy 3Com Router 5000 Family and Router 6000 Family Command Reference bsr-policy Purpose Use the bsr-policy command to restrict the range for valid BSR, preventing BSR spoofing. Use the undo bsr-policy command to restore the normal state without any range restriction and regard all the messages received are valid. Syntax bsr-policy acl-number undo bsr-policy Parameters acl-number Example Configure BSR filter policy on a router. Only permit 1.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference bsr-policy ● 7 The above two points can partially protect the security of BSR in the network. However, if a legal BSR router is controlled by an attacker, it will also lead to the above problem. The source parameter in the related rule command is translated as BSR address in bsr-policy command.
8 ● cache-sa-enable 3Com Router 5000 Family and Router 6000 Family Command Reference cache-sa-enable Purpose Use the cache-sa-enable command to enable the router to cache SA state. Use the undo cache-sa-enable command to remove the cache from the router. Syntax cache-sa-enable undo cache-sa-enable Parameters None Default By default, the router caches the SA state, tht is, (S, G) entry after it receives SA messages. Example Configure the router to cache all the SA states.
3Com Router 5000 Family and Router 6000 Family Command Reference c-bsr ● 9 c-bsr Purpose Use the c-bsr command to configure a candidate BSR. Use the undo c-bsr command to remove the candidate BSR configuration. Syntax c-bsr interface-type interface-number hash-mask-len [ priority ] undo c-bsr Parameters interface-type interface-number Interface type and interface number of a router. A candidate BSR is configured on this interface.
10 ● c-rp 3Com Router 5000 Family and Router 6000 Family Command Reference c-rp Purpose Use the c-rp command to configure the router to advertise itself as a candidate RP to BSR. Use the undo c-rp command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference crp-policy ● 11 crp-policy Purpose Use the crp-policy command to restrict the range for valid C-RP and the group range served by each C-RP, preventing C-RP cheating. Use the undo crp-policy command to restore the normal state without any range restriction and regard all the messages received are valid. Syntax crp-policy acl-number undo crp-policy Parameters acl-number Example Configure C-RP policy on C-BSR router. Only permit 1.1.1.
12 ● crp-policy Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ acl ■ rule
3Com Router 5000 Family and Router 6000 Family Command Reference debugging bgp mp-update ● 13 debugging bgp mp-update Purpose Use the debugging bgp mp-update command to enable MBGP Update packet debugging. Use the undo debugging bgp mp-update command to disable the functions. Syntax debugging bgp mp-update [ receive | send | verbose ] undo debugging bgp mp-update Parameters Example receive Enables incoming packet debugging of MBGP. send Enables outgoing packet debugging of MBGP.
14 ● debugging igmp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging igmp Purpose Use the debugging igmp command to enable IGMP debugging functions. Use the undo debugging igmp command to disable the debugging functions. Syntax debugging igmp { all | event | host | packet | timer } undo debugging igmp { all | event | host | packet | timer } Parameters all All the debugging information of IGMP. event Debugging information of IGMP event.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging msdp ● 15 debugging msdp Purpose Use the debugging msdp command to enable MSDP debugging functions. Use the undo debugging msdp command to disable MSDP debugging functions. Syntax debugging msdp { all | connect | event | packet | source-active } undo debugging msdp { all | connect | event | packet | source-active } Parameters all All the debugging information of MSDP.
16 ● debugging multicast forwarding 3Com Router 5000 Family and Router 6000 Family Command Reference debugging multicast forwarding Purpose Use the debugging multicast forwarding command to enable multicast packet forwarding debugging functions. Use the undo debugging multicast forwarding command to disable the debugging functions. Syntax debugging multicast forwarding undo debugging multicast forwarding Parameters None Default By default, the debugging function is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging multicast kernel-routing ● 17 debugging multicast kernel-routing Purpose Use the debugging multicast kernel-routing command to enable multicast kernel routing debugging functions. Use the undo debugging multicast kernel-routing command to disable the debugging functions.
18 ● debugging multicast status-forwarding 3Com Router 5000 Family and Router 6000 Family Command Reference debugging multicast status-forwarding Purpose Use the debugging multicast status-forwarding command to enable multicast forwarding status debugging functions. Use the undo debugging multicast status-forwarding command to disable the debugging functions.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pim common ● 19 debugging pim common Purpose Use the debugging pim common command to enable common PIM debugging functions. Use the undo debugging pim common command to disable the debugging functions. Syntax debugging pim common { all | event | packet | timer } undo debugging pim common { all | event | packet | timer } Parameters all All the common debugging information of PIM.
20 ● debugging pim dm 3Com Router 5000 Family and Router 6000 Family Command Reference debugging pim dm Purpose Use the debugging pim dm command to enable PIM-DM debugging functions. Use the undo debugging pim dm command to disable the debugging functions.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pim sm ● 21 debugging pim sm Purpose Use the debugging pim sm command to enable PIM-SM debugging functions. Use the undo debugging pim sm command to disable the debugging functions.
22 ● delete rpf-route-static all 3Com Router 5000 Family and Router 6000 Family Command Reference delete rpf-route-static all Purpose Use the delete rpf-route-static all command to delete all the static multicast routes. Syntax delete rpf-route-static all Parameters None Example Delete all the static multicast routes.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast group ● 23 display bgp multicast group Purpose Use the display bgp multicast group command to view the information about peer groups. Syntax display bgp multicast group [ group-name ] Parameters group-name: Example Display the information about the peer group named my_peer. Name of peer group. If no peer group is specified, the information about all peer groups will be displayed.
24 ● display bgp multicast network 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast network Purpose Use the display bgp multicast network command to view the routing information that MBGP advertises. Syntax display bgp multicast network Parameters None Example Display the network segment routing information that MBGP advertises.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast peer ● 25 display bgp multicast peer Purpose Use the display bgp multicast peer command to view information about MBGP peers. Syntax display bgp multicast peer [ ip-address | verbose ] Parameters ip-address Displays information about the specified peer. verbose Display complete information about peers. Example Display information about MBGP peers.
26 ● display bgp multicast routing 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing Purpose Use the display bgp multicast routing command to view the MBGP routing information whose IP address is specified in the BGP routing table. Syntax display bgp multicast routing ip-address [ mask ] Parameters ip-address Example Display the MBGP routing information with destination network segment 14.1.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing as-path-acl ● 27 display bgp multicast routing as-path-acl Purpose Use the display bgp multicast routing as-path-acl command to view in the BGP routing table the MBGP routes that match the specified AS path list. Syntax display bgp multicast routing as-path-acl as-path-acl Parameters as-path-acl Example Display in the BGP routing table the MBGP routes that match the specified AS path list.
28 ● display bgp multicast routing cidr 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing cidr Purpose Use the display bgp multicast routing cidr command to view the routing information with non-natural network mask (that is, classless inter-domain routing, CIDR). Syntax display bgp multicast routing cidr Parameters None Example Display CIDR routing information.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing community ● 29 display bgp multicast routing community Purpose Use the display bgp multicast routing community command to view the routing information that belongs to the specified MBGP community. Syntax display bgp multicast routing community [ community-number | no-export-subconfed | no-advertise | no-export | whole-match ] Parameters community-number Specifies community number.
30 ● display bgp multicast routing community-list 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing community-list Purpose Use the display bgp multicast routing community-list command to view the routing information that is permitted by the MBGP community list. Syntax display bgp multicast routing community-list list-number [ whole-match ] Parameters list-number Number of community list. whole-match Exact match.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing different-origin-as ● 31 display bgp multicast routing different-origin-as Purpose Use the display bgp multicast routing different-origin-as command to view AS routes with different origins. Syntax display bgp multicast routing different-origin-as Parameters None Example Display AS routes with different origins.
32 ● display bgp multicast routing peer 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing peer Purpose Use the display multicast routing peer command to view the route received from or sent to the specified multicast neighbor. Syntax display bgp multicast routing peer peer-address { received | advertised } Parameters peer-address Address of multicast neighbor, in dotted decimal notation format.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing regular-expression ● 33 display bgp multicast routing regular-expression Purpose Use the display bgp multicast routing regular-expression command to view the routing information matching the specified AS regular expression.
34 ● display bgp multicast routing statistic 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp multicast routing statistic Purpose Use the display bgp multicast routing statistic command to view statistics of MBGP route information. Syntax display bgp multicast routing statistic Parameters None Example Display statistics of MBGP route information.
3Com Router 5000 Family and Router 6000 Family Command Reference display igmp group ● 35 display igmp group Purpose Use the display igmp group command to view the member information of the IGMP multicast group. Syntax display igmp group [ group-address | interface interface-type interface-number | local ] Parameters group-address interface-type interface-number local Example Multicast group address. Interface type and interface number of the router, used to specify the interface.
36 ● display igmp interface 3Com Router 5000 Family and Router 6000 Family Command Reference display igmp interface Purpose Use the display igmp interface command to view the IGMP configuration and running information on an interface. Syntax display igmp interface [ interface-type interface-number ] Parameters interface-type interface-number Example Interface type and interface number of the router, used to specify the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display igmp local ● 37 display igmp local Purpose Use the display igmp local command to view the IGMP configuration and running information of the local interface which receives and sends multicast data. Syntax display igmp local Parameters local Example Display the IGMP configuration and running information of the local interface which receives and sends multicast data.
38 ● display msdp brief 3Com Router 5000 Family and Router 6000 Family Command Reference display msdp brief Purpose Use the display msdp brief command to view the state of MSDP peer. Syntax display msdp brief Parameters None Example Display the state of MSDP peer. <3Com> display msdp brief MSDP Peer Brief Information Peer’s Address State Up/Down time 20.20.20.
3Com Router 5000 Family and Router 6000 Family Command Reference display msdp peer-status ● 39 display msdp peer-status Purpose Use the display msdp peer-status command to view the detailed information of MSDP peer. Syntax display msdp peer-status [ peer-address ] Parameters peer-address Example Display the detailed information of the MSDP peer 10.110.11.11. Address of MSDP peer. <3Com> display msdp peer-status 10.110.11.11 MSDP Peer 20.20.20.
40 ● display msdp sa-cache 3Com Router 5000 Family and Router 6000 Family Command Reference display msdp sa-cache Purpose Use the display msdp sa-cache command to view (S, G) state learnt from MSDP peer. Syntax display msdp sa-cache [ group-address ] [ source-address ] autonomous-system-number ] Parameters group-address Group address of (S, G) entry. source-address Source address of (S, G) entry. With no source address specified, all the source information of the specified group will be displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display msdp sa-count ● 41 display msdp sa-count Purpose Use the display msdp sa-count command to view the number of sources and groups in MSDP cache. Syntax display msdp sa-count [ autonomous-system-number ] Parameters autonomous-system-number: Number of sources and groups from the specified autonomous system. Example <3Com> display msdp sa-count Number of cached Source-Active entries, counted by Peer Peer’s Address Number of SA 10.
42 ● display multicast forwarding-table 3Com Router 5000 Family and Router 6000 Family Command Reference display multicast forwarding-table Purpose Use the display multicast forwarding-table command to view the information of multicast forwarding table.
3Com Router 5000 Family and Router 6000 Family Command Reference display multicast routing-table static ● 43 display multicast routing-table static Purpose Use the display multicast routing-table static command to view the active multicast static routes. Syntax display multicast routing-table static [ source mask ] Parameters source IP address of multicast source (unicast address). mask IP address mask of multicast source. Example Display all active multicast static routes.
44 ● display multicast routing-table static config 3Com Router 5000 Family and Router 6000 Family Command Reference display multicast routing-table static config Purpose Use the display multicast routing-table static config command to view multicast static routes configured. Syntax display multicast routing-table static config [ source mask ] Parameters source IP address of multicast source (unicast address). mask IP address mask of multicast source.
3Com Router 5000 Family and Router 6000 Family Command Reference display multicast routing-table ● 45 display multicast routing-table Purpose Use the display multicast routing-table command to view the information of IP multicast routing table.
46 ● display multicast routing-table Description 3Com Router 5000 Family and Router 6000 Family Command Reference This command displays the multicast routing table information, while the display multicast forwarding-table command displays the multicast forwarding table information. The entry (S, G) in the multicast routing table, i.e., (multicast source, multicast group) acts as the independent entry in the table.
3Com Router 5000 Family and Router 6000 Family Command Reference display multicast routing-table static ● 47 display multicast routing-table static Purpose Use the display multicast routing-table static command to view the configuration information of static multicast route. Syntax display multicast routing-table static [ config ] [ source-address [ mask | mask-length ] ] Parameters config: When this parameter is chosen, all the routing information configured will be displayed.
48 ● display multicast rpf-info 3Com Router 5000 Family and Router 6000 Family Command Reference display multicast rpf-info Purpose Use the display multicast rpf-info command to view the Reverse Path Forwarding (RPF) routing information for specified multicast source. Syntax display multicast rpf-info source-address Parameters source-address Example Display all the RPF routing information. IP address of the multicast source. <3Com> display multicast rpf-info 192.193.194.
3Com Router 5000 Family and Router 6000 Family Command Reference display pim bsr-info ● 49 display pim bsr-info Purpose Use the display pim bsr-info command to view Bootstrap Router (BSR) information. Syntax display pim bsr-info Parameters None Example Execute this command on a router running PIM-SM and display the current BSR information. <3Com> display pim bsr-info Current BSR Address: 20.20.20.
50 ● display pim interface 3Com Router 5000 Family and Router 6000 Family Command Reference display pim interface Purpose Use the display pim interface command to view the PIM interface information. Syntax display pim interface [ interface-type interface-number ] Parameters interface-type interface-number Example Interface type and interface number. Display the PIM information about the interface Ethernet1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference display pim neighbor ● 51 display pim neighbor Purpose Use the display pim neighbor command to view the PIM neighbor information. Syntax display pim neighbor [ interface interface-type interface-number ] Parameters interface-type interface-number Example Interface type and interface number. Display the PIM neighbor information of the interface Ethernet1/0/0 on the router.
52 ● display pim routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference display pim routing-table Purpose Use the display pim routing-table command to view the contents of the PIM multicast routing table.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Related Command Any view display multicast routing-table display pim routing-table ● 53
54 ● display pim rp-info 3Com Router 5000 Family and Router 6000 Family Command Reference display pim rp-info Purpose Use the display pim rp-info command to view the corresponding RP information of multicast group, BSR and static RP information. Syntax display pim rp-info [ group-address ] Parameters group-address Example Display the currently corresponding RP of 224.0.0.0. Group address. <3Com> display pim rp-info 224.0.0.0 PIM-SM RP-SET information: BSR is: 20.20.20.20 Group/MaskLen: 224.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference igmp enable ● 55 igmp enable Purpose Use the igmp enable command to enable IGMP on an interface. Use the undo igmp enable command to disable IGMP on an interface. Syntax igmp enable undo igmp enable Parameters None Default By default, IGMP is disabled on an interface. Example Enable IGMP on interface Ethernet0/0/0.
56 ● igmp group-limit 3Com Router 5000 Family and Router 6000 Family Command Reference igmp group-limit Purpose Use the igmp group-limit command to limit the number of IGMP groups joined on the interface. If the number exceeds the limit, the router will not process the joined IGMP packet any more. Use the undo igmp group-limit command to restore the default configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference igmp group-policy ● 57 igmp group-policy Purpose Use the igmp group-policy command to set the filter of multicast groups on an interface to control the accessing to the IP multicast groups. Use the undo igmp group-policy command to remove the filter configured. Syntax igmp group-policy acl-number [ 1 | 2 ] undo igmp group-policy Parameters acl-number Number of basic IP ACL, defining the range of a multicast group.
58 ● igmp host-join 3Com Router 5000 Family and Router 6000 Family Command Reference igmp host-join Purpose Use the igmp host-join command to enable an interface of a router to join a multicast group. Use the undo igmp host-join command to disable the configuration. Syntax igmp host-join group-address undo igmp host-join group-address Parameters group-address Default By default, an interface does not join any multicast group. Example Configure Ethernet1/0/0 to join the multicast group 255.0.0.1.
3Com Router 5000 Family and Router 6000 Family Command Reference igmp lastmember-queryinterval ● 59 igmp lastmember-queryinterval Purpose Use the igmp lastmember-queryinterval command to set the interval at which IGMP querier sends the IGMP specified group query packet when it receives IGMP Leave packet from the host. Use the undo igmp lastmember-queryinterval command to restore the default value.
60 ● igmp lastmember-queryinterval Related Commands ■ igmp robust-count ■ display igmp interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference igmp max-response-time ● 61 igmp max-response-time Purpose Use the igmp max-response-time command to configure the maximum response time contained in the IGMP query packet. Use the undo igmp max-response-time command to restore the default value. Syntax igmp max-response-time seconds undo igmp max-response-time Parameters seconds: Example Configure the maximum response time to 8 seconds.
62 ● igmp proxy 3Com Router 5000 Family and Router 6000 Family Command Reference igmp proxy Purpose Use the igmp proxy command to specify an interface of a leaf network router as the IGMP proxy of another interface. Use the undo igmp proxy command to remove the configuration. Syntax igmp proxy interface-type interface-number undo igmp proxy Parameters interface-type Proxy interface type. interface-number Proxy interface number. Default By default, IGMP proxy function is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference igmp robust-count ● 63 igmp robust-count Purpose Use the igmp robust-count command to set the times IGMP querier sends the IGMP specified group query packet when it receives IGMP Leave packet from the host. Use the undo igmp robust-count command to restore the default value.
64 ● igmp robust-count Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference ■ igmp lastmember-queryinterval ■ display igmp interface
3Com Router 5000 Family and Router 6000 Family Command Reference igmp timer query ● 65 igmp timer query Purpose Use the igmp timer query command to configure the interval at which a router interface sends IGMP query messages. Use the undo igmp timer query command to restore the default value. Syntax igmp timer query seconds undo igmp timer query Parameters seconds Example Configure the interval at which multicast router Ethernet1/0/0 sends IGMP query packet to 125 seconds.
66 ● igmp timer other-querier-present 3Com Router 5000 Family and Router 6000 Family Command Reference igmp timer other-querier-present Purpose Use the igmp timer other-querier-present command to configure the overtime value of presence of IGMP querier. Use the undo igmp timer other-querier-present command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference igmp version ● 67 igmp version Purpose Use the igmp version command to specify the version of IGMP that a router uses. Use the undo igmp version command to restore the default value. Syntax igmp version { 1 | 2 } undo igmp version Parameters Example 1 IGMP Version 1. 2 IGMP Version 2. If no version is specified, the default IGMP Version is 2. Specify Ethernet1/0/0 to use IGMP Version 1.
68 ● import-route 3Com Router 5000 Family and Router 6000 Family Command Reference import-route Purpose Use the import-route command to import routing information from other protocols to BGP. Use the undo import-route command to cancel the importing of routing information from other protocols.
3Com Router 5000 Family and Router 6000 Family Command Reference import-source ● 69 import-source Purpose Use the import-source command to configure which (S, G) entries in the domain need to be advertised when a MSDP originates an SA message. Use the undo import-source command to remove the configuration. Syntax import-source [ acl acl-number ] undo import-source Parameters acl-number Default By default, all the (S, G) entries in the domain are advertised by the SA message.
70 ● ip rpf-longest-match 3Com Router 5000 Family and Router 6000 Family Command Reference ip rpf-longest-match Purpose Use the ip rpf-longest-match command to configure the longest-match rule to be the multicast RPF route selecting policy. Use the undo ip rpf-longest-match command to restore the default configuration. Syntax ip rpf-longest-match undo ip rpf-longest-match Parameters None Default By default, routes are selected according to the preference-preferred rule.
3Com Router 5000 Family and Router 6000 Family Command Reference ip rpf-route-static ● 71 ip rpf-route-static Purpose Use the ip rpf-route-static command to configure multicast static routes. Use the undo ip rpf-route-static command to remove the multicast static routes from the multicast static routing table.
72 ● ip rpf-route-static 3Com Router 5000 Family and Router 6000 Family Command Reference [3Com] ip rpf-route-static 1.0.0.0 255.0.0.0 null0 Display the multicast static route configured.
3Com Router 5000 Family and Router 6000 Family Command Reference ipv4-family multicast ● 73 ipv4-family multicast Purpose Use the ipv4-family multicast command to enter the IPv4 multicast subaddress family view. Use the undo ipv4-family multicast command to remove all the configurations in the IPv4 multicast subaddress family view. Syntax ipv4-family multicast undo ipv4-family multicast Parameters None Example Enter the IPv4 multicast subaddress family view.
74 ● msdp 3Com Router 5000 Family and Router 6000 Family Command Reference msdp Purpose Use the msdp command to enable MSDP and enter the MSDP view. Use the undo msdp command to clear all configurations of MSDP, release all resources that MSDP occupies, and restore the initial state. Syntax msdp undo msdp Parameters None Example Clear all configurations of MSDP.
3Com Router 5000 Family and Router 6000 Family Command Reference msdp-tracert ● 75 msdp-tracert Purpose Use the msdp-tracert command to trace the transmission path of SA messages in the network. Syntax msdp-tracert source-address group-address rp-address [ max-hops max-hops ] [ next-hop-info ] [ sa-info ] [ peer-info ] [ skip-hops skip-hops ] Parameters source-address Multicast address address. group-address Multicast group address. rp-address IP address of RP.
76 ● msdp-tracert 3Com Router 5000 Family and Router 6000 Family Command Reference Peering info: Peering Uptime: 10 minutes, Count of Peering Resets: 3 Table 3 Description of msdp-tracert command domain Item Description Router Address Address where the local router creates Peering session with Peer-RPF neighbor. Peer Uptime Time for which the local router performs Peering session with Peer-RPF neighbor in minute, with the maximum value of 255.
3Com Router 5000 Family and Router 6000 Family Command Reference mtracert ● 77 mtracert Purpose Use the mtracert command to trace the network path from the multicast source to the destination receiver along Multicast Distribution Tree, according to either the multicast kernel routing table or RPF rule to the source. Syntax mtracert source-address [ last-hop-address ] [ group-address ] Parameters source-address Address of the multicast source.
78 ● mtracert 3Com Router 5000 Family and Router 6000 Family Command Reference Trace reversely the path information of multicast group 225.1.1.1 from the multicast source 10.10.1.3 to the destination address 12.110.0.2. <3Com>mtracert 10.10.1.3 12.110.0.2 225.1.1.1 Type Ctrl+C to abort Mtrace from 10.10.1.3 to 12.110.0.2 via group 225.1.1.1 Querying full reverse path... -1 12.110.0.2 Incoming Interface Address: 11.110.0.2 Previous-Hop Router Address: 11.110.0.
3Com Router 5000 Family and Router 6000 Family Command Reference multicast minimum-ttl ● 79 multicast minimum-ttl Purpose Use the multicast minimum-ttl command to configure the minimum TTL value for multicast forwarding. Use the undo multicast minimum-ttl command to remove the minimum TTL value configured. Syntax multicast minimum-ttl ttl-value undo multicast minimum-ttl Parameters ttl-value: Default By default, no minimum TTL value for multicast forwarding is configured.
80 ● multicast minimum-ttl 3Com Router 5000 Family and Router 6000 Family Command Reference multicast minimum-ttl Purpose Use the multicast minimum-ttl command to configure the minimum TTL value for multicast forwarding. Use the undo multicast minimum-ttl command to remove the minimum TTL value configured. Syntax multicast minimum-ttl ttl-value undo multicast minimum-ttl Parameters ttl-value: Default By default, no minimum TTL value for multicast forwarding is configured.
3Com Router 5000 Family and Router 6000 Family Command Reference multicast packet-boundary ● 81 multicast packet-boundary Purpose Use the multicast packet-boundary command to configure a multicast forwarding boundary. Use the undo multicast packet-boundary command to remove the multicast forwarding boundary configured. Syntax multicast packet-boundary acl-number undo multicast packet-boundary Parameters acl-number Default By default, no multicast forwarding boundary is configured.
82 ● multicast route-limit 3Com Router 5000 Family and Router 6000 Family Command Reference multicast route-limit Purpose Use the multicast route-limit command to limit the multicast routing table capacity. If the capacity exceeds the limit, the router will discard protocols and data packets of the newly-added (S, G). Syntax multicast route-limit limit Parameters limit Default By default, the limit of multicast routing table capacity is MAX_MROUTE_LIMIT.
3Com Router 5000 Family and Router 6000 Family Command Reference multicast route-limit ● 83 multicast route-limit Purpose Use the multicast route-limit command to limit the multicast routing table capacity. If the capacity exceeds the limit, the router will discard protocols and data packets of the newly-added (S, G). Syntax multicast route-limit limit Parameters limit Default By default, the limit of multicast routing table capacity is MAX_MROUTE_LIMIT.
84 ● multicast routing-enable 3Com Router 5000 Family and Router 6000 Family Command Reference multicast routing-enable Purpose Use the multicast routing-enable command to enable IP multicast routing. Use the undo multicast routing-enable command to disable IP multicast routing. Syntax multicast routing-enable undo multicast routing-enable Parameters None Default By default, IP multicast routing is disabled. Example Enable IP multicast routing.
3Com Router 5000 Family and Router 6000 Family Command Reference multicast routing-enable ● 85 multicast routing-enable Purpose Use the multicast routing-enable command to enable IP multicast routing. Use the undo multicast routing-enable command to disable IP multicast routing. Syntax multicast routing-enable undo multicast routing-enable Parameters None Default By default, IP multicast routing is disabled. Example Enable IP multicast routing.
86 ● multicast packet-boundary 3Com Router 5000 Family and Router 6000 Family Command Reference multicast packet-boundary Purpose Use the multicast packet-boundary command to configure a multicast forwarding boundary. Use the undo multicast packet-boundary command to remove the multicast forwarding boundary configured. Syntax multicast packet-boundary acl-number undo multicast packet-boundary Parameters acl-number Default By default, no multicast forwarding boundary is configured.
3Com Router 5000 Family and Router 6000 Family Command Reference mtracert ● 87 mtracert Purpose Use the mtracert command to trace the network path from the multicast source to the destination receiver along Multicast Distribution Tree, according to either the multicast kernel routing table or RPF rule to the source. Syntax mtracert source-address [ last-hop-address ] [ group-address ] Parameters source-address Address of the multicast source.
88 ● mtracert 3Com Router 5000 Family and Router 6000 Family Command Reference Trace reversely the path information of multicast group 225.1.1.1 from the multicast source 10.10.1.3 to the destination address 12.110.0.2. <3Com>mtracert 10.10.1.3 12.110.0.2 225.1.1.1 Type Ctrl+C to abort Mtrace from 10.10.1.3 to 12.110.0.2 via group 225.1.1.1 Querying full reverse path... -1 12.110.0.2 Incoming Interface Address: 11.110.0.2 Previous-Hop Router Address: 11.110.0.
3Com Router 5000 Family and Router 6000 Family Command Reference network ● 89 network Purpose Use the network command to configure the network addresses to be sent by the local BGP. Use the undo network command to remove the existing configuration. Syntax network ip-address [ address-mask ] [ route-policy policy-name ] undo network ip-address [ address-mask ] [ route-policy policy-name ] Parameters ip-address Network address that BGP advertises. address-mask Mask of the network address.
90 ● originating-rp 3Com Router 5000 Family and Router 6000 Family Command Reference originating-rp Purpose Use the originating-rp command to allow a MSDP to use the IP address of specified interface as the RP address in the SA message originated. Use the undo originating-rp command to remove the configuration. Syntax originating-rp interface-type interface-number undo originating-rp Parameters interface-type Interface type. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference peer ● 91 peer Purpose Use the peer command to configure an MSDP peer. Use the undo peer command to remove the MSDP peer configured. Syntax peer peer-address connect-interface interface-type interface-number undo peer peer-address Parameters peer-address connect-interface interface-type interface-number Example Address of MSDP peer.
92 ● peer advertise-community 3Com Router 5000 Family and Router 6000 Family Command Reference peer advertise-community Purpose Use the peer advertise-community command to configure to advertise community attributes to a peer (group). Use the undo peer advertise-community command to remove the existing configuration. Syntax peer group-name advertise-community undo peer group-name advertise-community Parameters group-name Default By default, no community attribute is advertised to any peer (group).
3Com Router 5000 Family and Router 6000 Family Command Reference peer allow-as-loop ● 93 peer allow-as-loop Purpose Use the peer allow-as-loop command to allow the AS_PATH attribute in the received routes to include the local AS number. Use the undo peer allow-as-loop command to disallow the AS_PATH attribute in the received routes to include the local AS number.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ IPv4 Multicast Subaddress Family view peer as-path-acl ● 95
96 ● peer description 3Com Router 5000 Family and Router 6000 Family Command Reference peer description Purpose Use the peer description command to configure descriptive text to MSDP peer. Use the undo peer description command to remove the descriptive text configured. Syntax peer peer-address description text undo peer peer-address description Parameters peer-address Address of MSDP peer. text Descriptive text, being case sensitive. The maximum length is 80 characters.
3Com Router 5000 Family and Router 6000 Family Command Reference peer enable ● 97 peer enable Purpose Use the peer enable command to enable the multicast peer or peer group. Use the undo peer enable command to disable the multicast peer or peer group. Syntax peer group-name enable undo peer group-name enable Parameters group-name Default By default, the multicast peer (or peer group) is disabled. Example Enable the multicast peer test. Name of the multicast peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command peer as-path-acl peer filter-policy ● 99
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ IPv4 Multicast Subaddress Family view peer ip-prefix ● 101
102 ● peer mesh-group 3Com Router 5000 Family and Router 6000 Family Command Reference peer mesh-group Purpose Use the peer mesh-group command to configure an MSDP peer to join an Mesh Group. Use the undo peer mesh-group command to remove the configuration. Syntax peer peer-address mesh-group name undo peer peer-address mesh-group name Parameters name Name of an Mesh Group, being case sensitive. The maximum length is 32 characters.
3Com Router 5000 Family and Router 6000 Family Command Reference peer minimum-ttl ● 103 peer minimum-ttl Purpose Use the peer minimum-ttl command to configure the minimum TTL (Time-to-Live) value of the multicast data packets encapsulated in SA messages to be sent to specified MSDP peer. Use the undo peer minimum-ttl command to restore the default TTL threshold.
104 ● peer next-hop-local 3Com Router 5000 Family and Router 6000 Family Command Reference peer next-hop-local Purpose Use the peer next-hop-local command to remove the processing of the next hop in routes which BGP will advertise to the peer (group) and set the local address as the next hop. Use the undo peer next-hop-local command to remove the existing setting.
3Com Router 5000 Family and Router 6000 Family Command Reference peer public-as-only ● 105 peer public-as-only Purpose Use the peer public-as-only command to configure only to carry public AS number rather than private AS number when BGP sends update packets. Use the undo peer public-as-only command to configure to carry private AS number when BGP sends update packets.
106 ● peer reflect-client 3Com Router 5000 Family and Router 6000 Family Command Reference peer reflect-client Purpose Use the peer reflect-client command to configure a peer (group) as a client of the route reflector. Use the undo peer reflect-client command to remove the existing configuration. Syntax peer group-name reflect-client undo peer group-name reflect-client Parameters group-name Default By default, there is no route reflector in the autonomous system.
3Com Router 5000 Family and Router 6000 Family Command Reference peer request-sa-enable ● 107 peer request-sa-enable Purpose Use the peer request-sa-enable command to enable the router to send SA request message to the specified MSDP peer when receiving a new group join message. Use the undo peer request-sa-enable command to remove the configuration.
108 ● peer sa-cache-maximum 3Com Router 5000 Family and Router 6000 Family Command Reference peer sa-cache-maximum Purpose Use the peer sa-cache-maximum command to limit the number of caches originated when the router receives SA messages from an MSDP peer. Use the undo peer sa-cache-maximum command to restore the default configuration. Syntax peer peer-address sa-cache-maximum sa-limit undo peer peer-address sa-cache-maximum Parameters peer-address Address of MSDP peer.
3Com Router 5000 Family and Router 6000 Family Command Reference peer sa-policy ● 109 peer sa-policy Purpose Use the peer sa-policy command to configure a filter list for SA messages received or forwarded from the specified MSDP peer. Use the undo peer sa-policy command to remove the configuration. Syntax peer peer-address sa-policy { import | export } [ acl acl-number ] undo peer peer-address sa-policy { import | export } Parameters import Receives SA messages from the specified MSDP peer.
110 ● peer sa-request-policy 3Com Router 5000 Family and Router 6000 Family Command Reference peer sa-request-policy Purpose Use the peer sa-request-policy command to limit SA request messages that the router receives from MSDP peers. Use the undo peer sa-request-policy command to remove the limitation.
112 ● pim 3Com Router 5000 Family and Router 6000 Family Command Reference pim Purpose Use the pim command to enter PIM view. Use the undo pim command to clear the configuration in PIM view. Syntax pim undo pim Parameters None Example <3Com> system-view [3Com] multicast routing-enable [3Com] pim [3Com-pim] View This command can be used in the following views: ■ Description System view The global parameter which is related with the PIM must be configured in PIM view.
3Com Router 5000 Family and Router 6000 Family Command Reference pim bsr-boundary ● 113 pim bsr-boundary Purpose Use the pim bsr-boundary command to configure an interface to become the PIM domain boundary. Use the undo pim bsr-boundary command to remove the boundary. Syntax pim bsr-boundary undo pim bsr-boundary Parameters None Default By default, no domain boundary is set. Example Configure a domain boundary on the interface Pos1/0/0.
114 ● pim neighbor-limit 3Com Router 5000 Family and Router 6000 Family Command Reference pim neighbor-limit Purpose Use the pim neighbor-limit command to limit PIM neighbor number on an router interface. If the number exceeds the limit configured, no new neighbor can be added to the router. Use the undo pim neighbor-limit command to restore the default configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference pim neighbor-policy ● 115 pim neighbor-policy Purpose Use the pim neighbor-policy command to configure a router to filter the PIM neighbor of the current interface. Use the undo pim neighbor-policy command to cancel the filtering. Syntax pim neighbor-policy acl-number undo pim neighbor-policy Parameters acl-number Example Configure 10.10.1.2 rather than 10.10.1.1 as the PIM neighbor of Ethernet1/0/0. Number of basic ACL.
116 ● pim dm 3Com Router 5000 Family and Router 6000 Family Command Reference pim dm Purpose Use the pim dm command to enable PIM-DM. Use the undo pim dm command to disable PIM-DM. Syntax pim dm undo pim dm Parameters None Default By default, PIM-DM is disabled. Example Enable PIM-DM on the interface Ethernet1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference pim sm ● 117 pim sm Purpose Use the pim sm command to enable PIM-SM protocol on an interface. Use the undo pim sm command to disable PIM-SM protocol. Syntax pim sm undo pim sm Parameters None Default By default, PIM-SM is disabled. Example Enable PIM-SM on the interface Ethernet1/0/0.
118 ● pim timer hello 3Com Router 5000 Family and Router 6000 Family Command Reference pim timer hello Purpose Use the pim timer hello command to configure the interval for sending PIM router Hello messages. Use the undo pim timer hello command to restore the default value. Syntax pim timer hello seconds undo pim timer hello Parameters seconds Example Configure the interval of sending Hello message on the interface Ethernet1/0/0 on the PIM router to 40 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference register-policy ● 119 register-policy Purpose Use the register-policy command to configure a RP to filter the register packet sent by the DR in the PIM-SM network and to accept the specific packet only. Use the undo register-policy command to remove the configured packet filtering.
120 ● reset igmp group 3Com Router 5000 Family and Router 6000 Family Command Reference reset igmp group Purpose Use the reset igmp group command to delete the IGMP group joined on the interface. The deletion of the group does not affect its joining again. Syntax reset igmp group { all | interface interface-type interface-number { all | group-address [ group-mask ] } } all All IGMP groups. interface interface-type interface-number Interface type and interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset msdp peer ● 121 reset msdp peer Purpose Use the reset msdp peer command to reset TCP connection with the specified MSDP peer, and clear all the statistics of the specified MSDP peer. Syntax reset msdp peer peer-address Parameters peer-address Example Clear TCP connection and statistics of the MSDP peer 125.10.7.6. Address of MSDP peer. <3Com> reset msdp peer 125.10.7.
122 ● reset msdp sa-cache 3Com Router 5000 Family and Router 6000 Family Command Reference reset msdp sa-cache Purpose Use the reset msdp sa-cache command to clear SMDP SA cache entries. Syntax reset msdp sa-cache [ group-address ] Parameters group-address Example Clear the cache entries with group address 225.5.4.3 from the SA cache. Address of the group, (S, G) entries matching which are cleared from the SA cache. If no multicast group address is specified, all SA cache entries will be cleared.
3Com Router 5000 Family and Router 6000 Family Command Reference reset msdp statistics ● 123 reset msdp statistics Purpose Use the reset msdp statistics command to clear statistics of one or more MSDP peers without resetting the MSDP peer. Syntax reset msdp statistics [ peer-address ] Parameters peer-address Example Clear the statistics of the MSDP peer 25.10.7.6. Address of the MSDP peer whose statistics, resetting information and input/output information will be cleared.
124 ● reset multicast forwarding-table 3Com Router 5000 Family and Router 6000 Family Command Reference reset multicast forwarding-table Purpose Use the reset multicast forwarding-table command to clear MFC forwarding entries or the statistics of MFC forwarding entries.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands reset multicast forwarding-table ● 125 ■ reset pim routing-table ■ reset multicast routing-table ■ display multicast forwarding-table
126 ● reset multicast forwarding-table 3Com Router 5000 Family and Router 6000 Family Command Reference reset multicast forwarding-table Purpose Use the reset multicast forwarding-table command to clear MFC forwarding entries or the statistics of MFC forwarding entries.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands reset multicast forwarding-table ● 127 ■ reset pim routing-table ■ reset multicast routing-table ■ display multicast forwarding-table
128 ● reset multicast routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference reset multicast routing-table Purpose Use the reset multicast routing-table command to clear the route entry in the multicast kernel routing table and remove the corresponding forwarding entry in MFC.
3Com Router 5000 Family and Router 6000 Family Command Reference reset multicast routing-table ● 129 reset multicast routing-table Purpose Use the reset multicast routing-table command to clear the route entry in the multicast kernel routing table and remove the corresponding forwarding entry in MFC.
130 ● reset pim neighbor 3Com Router 5000 Family and Router 6000 Family Command Reference reset pim neighbor Purpose Use the reset pim neighbor command to clear PIM neighbor. Syntax reset pim neighbor { all | { neighbor-address | interface interface-type interface-number } * } Parameters all All PIM neighbors. neighbor-address Specifies neighbor address. interface Specifies the interface. interface-type interface-number Interface type and interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset pim routing-table ● 131 reset pim routing-table Purpose Use the reset pim routing-table command to clear PIM route entry. Syntax reset pim routing-table all reset pim routing-table { group-address [ mask group-mask | group-mask-length ] [ source-address [ mask source-mask | source-mask-length ] [ incoming-interface { interface-type interface-number | null } ] } * Parameters all All PIM route entries.
132 ● reset pim routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference After this command is executed, not only the multicast route entry is deleted from PIM, but also the corresponding route entry or forwarding entry in the multicast kernel routing table and MFC is deleted.
3Com Router 5000 Family and Router 6000 Family Command Reference shutdown ● 133 shutdown Purpose Use the shutdown command to disable the MSDP peer specified. Use the undo shutdown command to remove the configuration. Syntax shutdown peer-address undo shutdown peer-address Parameters peer-address Default By default, no MSDP peer is disabled. Example Disable the MSDP peer 125.10.7.6. IP address of MSDP peer. <3Com> system-view [3Com] msdp [3Com-msdp] shutdown 125.10.7.
134 ● source-policy 3Com Router 5000 Family and Router 6000 Family Command Reference source-policy Purpose Use the source-policy command to configure a router to filter the multicast data packet received according to source (group) address. Use the undo source-policy command to remove the configuration. Syntax source-policy acl-number undo source-policy Parameters acl-number Example Configure to accept the multicast data packets with source address of 10.10.1.
3Com Router 5000 Family and Router 6000 Family Command Reference spt-switch-threshold ● 135 spt-switch-threshold Purpose Use the spt-switch-threshold command to set the packet rate threshold when the PIM leaf router switches from the RPT to the SPT. Use the undo spt-switch-threshold command to restore the default setting.
136 ● static-rp 3Com Router 5000 Family and Router 6000 Family Command Reference static-rp Purpose Use the static-rp command to configure static RP. Use the undo static-rp command to remove the configuration. Syntax static-rp rp-address [ acl-number ] undo static-rp Parameters Example rp-address Static RP address. This address must be valid unicast IP address and cannot be configured as the address in 127 network segment.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command display pim rp-info static-rp ● 137
138 ● static-rpf-peer 3Com Router 5000 Family and Router 6000 Family Command Reference static-rpf-peer Purpose Use the static-rpf-peer command to configure static RPF peer. Use the undo static-rpf-peer command to remove the static RPF peer. Syntax static-rpf-peer peer-address [ rp-policy list ] undo static-rpf-peer peer-address Parameters peer-address Address of the static RPF peer to receive SA messages. rp-policy list Filter policy based on RP address, which filters the RP in SA messages.
3Com Router 5000 Family and Router 6000 Family Command Reference timer retry ● 139 timer retry Purpose Use the timer retry command to configure the value of connection request re-try period. Use the undo timer retry command to restore the default value. Syntax timer retry seconds undo timer retry Parameters seconds Example Configure the connection request re-try period to 60 seconds. Value of connection request re-try period in seconds. Valid values are 1 to 60.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 MPLS ALPHABETICAL LISTING OF COMMANDS apply access-vpn vpn-instance 3 apply mpls-label 4 ccc interface out-interface 5 ccc interface transmit-lsp receive-lsp 6 ce 8 connection 9 debugging mpls ldp 10 debugging mpls lspm 11 debugging mpls l2vpn 12 description 13 display bgp routing label 14 display bgp vpnv4 15 display bgp l2vpn 17 display ccc 18 display ip routing-table vpn-instance 19 display ip vpn-instance 20 display mpls cell-transfe
2● 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp 52 mpls ldp enable 53 mpls ldp hops-count 54 mpls ldp loop-detect 55 mpls ldp password 56 mpls ldp path-vectors 57 mpls ldp remote-peer 58 mpls ldp reset-session 59 mpls ldp timer 60 mpls ldp transport-ip 61 mpls lsr-id 62 mpls static-l2vc 63 mpls l2vc 64 mpls l2vpn encapsulation 65 mpls l2vpn 67 mtu 68 peer default-route-advertise 69 peer enable 70 peer label route-capability 71 peer next-hop-invariable 72 ospf vpn instance 73 p
3Com Router 5000 Family and Router 6000 Family Command Reference apply access-vpn vpn-instance ● 3 apply access-vpn vpn-instance Purpose Use the apply access-vpn vpn-instance command to specify to search private network forwarding routes in vpn-name1, vpn-name2, vpn-name3, vpn-name4, vpn-name5, vpn-name6 (if they all exist) and forward packets after policy routing is enabled to satisfy route-policy. Use the undo apply access-vpn vpn-instance command to remove this function.
4 ● apply mpls-label 3Com Router 5000 Family and Router 6000 Family Command Reference apply mpls-label Purpose Use the apply mpls-label command to assign MPLS labels for public network routes that match route-policy filter conditions. Use the undo apply mpls-label command to remove the configuration. Syntax apply mpls-label undo apply mpls-label Parameters None Default By default, no label is assigned for public network routes.
3Com Router 5000 Family and Router 6000 Family Command Reference ccc interface out-interface ● 5 ccc interface out-interface Purpose Use the ccc interface out-interface command to create a local CCC connection. Use the undo ccc command to delete the local CCC connection.
6 ● ccc interface transmit-lsp receive-lsp 3Com Router 5000 Family and Router 6000 Family Command Reference ccc interface transmit-lsp receive-lsp Purpose Use the ccc interface transmit-lsp receive-lsp command to create a remote CCC connection. Use the undo ccc command to delete a remote CCC connection.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command ccc interface out-interface ccc interface transmit-lsp receive-lsp ● 7
8 ● ce 3Com Router 5000 Family and Router 6000 Family Command Reference ce Purpose Use the ce command to create a CE or modify the CE range. Use the undo ce command to delete a CE. Syntax ce name [ id id range range ] [ default-offset offset ] ] undo ce name Parameters Example name CE name, unique in the current PE VPN. id CE ID, unique in VPN, represents a CE, ranging from 1 to 65535. offset Specifies default offset value of the original CE.
3Com Router 5000 Family and Router 6000 Family Command Reference connection ● 9 connection Purpose Use the connection command to create a CE connection. Use the undo connection command to delete a CE connection.
10 ● debugging mpls ldp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging mpls ldp Purpose Use the debugging ldp command to enable debugging of LDP messages. Use the undo debugging ldp command to disable debugging of LDP messages. You can use this command to view LDP debugging information, but take caution when doing so.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging mpls lspm ● 11 debugging mpls lspm Purpose Use the debugging mpls lspm command to enable various LSP debugging. Use the undo debugging mpls lspm command to disable the corresponding debugging.
12 ● debugging mpls l2vpn 3Com Router 5000 Family and Router 6000 Family Command Reference debugging mpls l2vpn Purpose Use the debugging mpls l2vpn command to view L2VPN link information. Use the undo debugging mpls l2vpn command to disable the debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference description ● 13 description Purpose Use the description command to configure description information for a specified VPN instance. Use the undo description command to remove the description of a VPN instance. Syntax description vpn-instance-description undo description Parameters vpn-instance-description Specifies the description information of VPN instance.] Example Configure description information of VPN.
14 ● display bgp routing label 3Com Router 5000 Family and Router 6000 Family Command Reference display bgp routing label Purpose Use the display bgp routing label command to view routing information and label information in the BGP routing table. Syntax display bgp routing label Parameters None Example Display BGP routing information.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp vpnv4 ● 15 display bgp vpnv4 Purpose Use the display bgp vpnv4 command to view VPNv4 information in BGP database.
16 ● display bgp vpnv4 Example 3Com Router 5000 Family and Router 6000 Family Command Reference no-export-subconfed Displays routes that are not advertised outside the local AS. whole-match Displays routes that are exact matches of the specified community. different-origin-as Displays routes that are not originated from the local AS. advertised Displays all the routes advertised to the peer. received Displays all the routes received from the peer.
3Com Router 5000 Family and Router 6000 Family Command Reference display bgp l2vpn ● 17 display bgp l2vpn Purpose Use the display bgp l2vpn all command to view system operating information and all L2VPN information. Syntax display bgp l2vpn { all | peer | route-distinguisher } Parameters all All L2VPN information in the current address family. peer Information of the specified BGP peer. route-distinguisher Information of the specified VPN RD. Example Display all L2VPN information.
18 ● display ccc 3Com Router 5000 Family and Router 6000 Family Command Reference display ccc Purpose Use the display ccc command to view CCC connection information. Syntax display ccc [ ccc-name | type [ local | remote ] ] Parameters ccc-name Name of the connection to be displayed. local Displays local CCC connection only. remote Displays remote CCC connection only. Example Display CCC connection information.
3Com Router 5000 Family and Router 6000 Family Command Reference display ip routing-table vpn-instance ● 19 display ip routing-table vpn-instance Purpose Use the display ip routing-table vpn-instance command to view the specified information in the IP routing table of vpn-instance. Syntax display ip routing-table vpn-instance vpn-instance-name [ statistics | [ ip-address ] [ verbose ] ] Parameters vpn-instance-name Name assigned to vpn-instance.
20 ● display ip vpn-instance 3Com Router 5000 Family and Router 6000 Family Command Reference display ip vpn-instance Purpose Use the display ip vpn-instance command to view the information related to vpn-instance, such as RD, description, and interfaces of the VPN instance. Syntax display ip vpn-instance [ vpn-instance-name | verbose ] Parameters vpn-instance-name Name assigned to vpn-instance. verbose Displays detailed information. Example Display the information about vpn-instance vpn1.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls cell-transfer interface ● 21 display mpls cell-transfer interface Purpose Use the display mpls cell-transfer interface command to view statistics for cells received and sent in a packet on an interface in transparent transmission mode.
22 ● display mpls interface 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls interface Purpose Use the display mpls interface command to view all MPLS-enabled interfaces. Syntax display mpls interface Parameters None Example Display all MPLS-enabled interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp ● 23 display mpls ldp Purpose Use the display mpls ldp command to view LDP and LSR information. Syntax display mpls ldp Parameters None Example Display LDP and LSR information.
24 ● display mpls ldp buffer-info 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp buffer-info Purpose Use the display mpls ldp buffer-info command to view the buffer information of LDP. Syntax display mpls ldp buffer-info Parameters None Example Display LDP buffer information.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp interface ● 25 display mpls ldp interface Purpose Use the display mpls ldp interface command to view the information of an LDP-enabled interface. Syntax display mpls ldp interface Parameters None Example Display the information of an LDP-enabled interface.
26 ● display mpls ldp lsp 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp lsp Purpose Use the display mpls ldp lsp command to view relevant LSP information created via LDP. Syntax display mpls ldp lsp Parameters None Example Display LSP.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp peer ● 27 display mpls ldp peer Purpose Use the display mpls ldp peer command to view peer information. Syntax display mpls ldp peer Parameters None Example Display peer information.
28 ● display mpls ldp remote 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp remote Purpose Use the display mpls ldp remote command to view the configured remote peer information. Syntax display mpls ldp remote Parameters None Example Display the configured remote-peer information.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls ldp session ● 29 display mpls ldp session Purpose Use the display mpls ldp session command to display the session between peer entities. Syntax display mpls ldp session Parameters None Example Display the session between peer entities. [3Com ] display mpls ldp session Local LDP ID: 1.1.1.9:5; Peer LDP ID: 4.4.4.9:0 TCP Connection: 1.1.1.9 <- 4.4.4.
30 ● display mpls lsp 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls lsp Purpose Use the display mpls lsp command to view LSP information. Syntax display mpls lsp [ verbose ] [ include text ] Parameters verbose Displays detailed information. include text Displays the information with the specified string included. Default By default, the display mpls lsp command displays all LSP information. Example Display all LSPs whose incoming interfaces are Serial 3/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls static-l2vc ● 31 display mpls static-l2vc Purpose Use the display mpls static-l2vc command to view the connection information of static MPLS L2VPN. Syntax display mpls static-l2vc [ interface interface-type interface-num ] Parameters interface-type interface -num Interface type and interface number Example Display basic information of static connections.
32 ● display mpls l2vc 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls l2vc Purpose Use the display mpls l2vc command to view the VC information in LDP. Syntax display mpls l2vc [ interface interface-type interface-num | verbose ] Parameters verbose Displays the detailed information. interface-type interface-num Name of the interface connected to CE.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls l2vpn forwarding-info ● 33 display mpls l2vpn forwarding-info Purpose Use the display mpls l2vpn forwarding-info command to view the L2VPN information of a specific interface.
34 ● display mpls static-lsp 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls static-lsp Purpose Use the display mpls static-lsp command to view the information of all or one static LSP(s). Syntax display mpls static-lsp [ verbose ] [ include text ] Parameters verbose Displays detailed information. include text Displays the information with the specified string included. Example Display information of the static LSP named “citiya-cityb”.
3Com Router 5000 Family and Router 6000 Family Command Reference display mpls statistics ● 35 display mpls statistics Purpose Use the display mpls statistics command to view statistics of all or one LSP(s) and LSP statistics on all or one interface(s). Syntax display mpls statistics { interface { all | interface-type interface-number } } | { lsp [ lsp-Index | all | name lsp-name ] } } Parameters interface-type Type of network interface. Interface-number Number of network interface.
36 ● display mpls statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Out Packets of Mpls interface is: 0 Out Errors of Mpls interface is: 0 Out Discard Packets of Mpls interface is: 0 The statistics of interface : Serial6/0/1 The statistics of interface in : In Octets of Mpls interface is: 0 In Packets of Mpls interface is: 0 In Errors of Mpls interface is: 0 In Discard Packets of Mpls interface is: 0 The statistics of interface out : Out Octets of Mpls interface is: 0 Out Packets
3Com Router 5000 Family and Router 6000 Family Command Reference display ospf sham-link ● 37 display ospf sham-link Purpose Use the display ospf sham-link command to view the information of sham links. Syntax display ospf sham-link Parameters None Example Display the information of sham links. <3Com > display ospf sham-link OSPF Process 1 with Router ID 1.1.1.1 Sham Links Sham-link 3.3.3.3 -> 5.5.5.5, State: Down Area: 0.0.0.
38 ● display mpls l3vpn-lsp 3Com Router 5000 Family and Router 6000 Family Command Reference display mpls l3vpn-lsp Purpose Use the display mpls l3vpn-lsp command to view the information of vpn-instance of MPLS L3VPN LSPs. Syntax display mpls l3vpn-lsp [ vpn-instance vpn-instance-name ] [ transit | egress | ingress ] [include text | verbose ] Parameters transit LSP of ASBR VPN. egress LSP of egress VPN. ingress LSP of ingress VPN.
3Com Router 5000 Family and Router 6000 Family Command Reference domain-id ● 39 domain-id Purpose Use the domain-id command to specify domain ID for a VPN instance. Use the undo domain-id command to restore the default domain ID. Syntax domain-id { id-number | id-addr } undo domain-id Parameters id-number Domain ID for a VPN instance, an integer in the range of 0 to 4294967295. By default, it is 0. id-addr IP address format of the domain ID of a VPN instance. By default, it is 0.0.0.0.
40 ● if-match mpls-label 3Com Router 5000 Family and Router 6000 Family Command Reference if-match mpls-label Purpose Use the if-match mpls-label command to configure to match public network routes with MPLS labels only. Use the undo if-match mpls-label command to remove the match rules. Syntax if-match mpls-label undo if-match mpls-label Parameters None Example Define an if-match clause to permit the filtering of routes with labels.
3Com Router 5000 Family and Router 6000 Family Command Reference import-route ospf ● 41 import-route ospf Purpose Use the import-route ospf command to enable to import OSPF route. Use the undo import-route ospf command to disable to import OSPF route. Syntax import-route { ospf | ospf-ase | ospf-nssa } [ process-id ] [ med value | route-policy route-policyname ] undo import-route { ospf | ospf-ase | ospf-nssa } [ process-id ] Parameters Example process-id OSPF process ID. By default, it is 1.
42 ● ip binding vpn-instance 3Com Router 5000 Family and Router 6000 Family Command Reference ip binding vpn-instance Purpose Use the ip binding vpn-instance command to bind an interface or subinterface to a vpn-instance. Use the undo ip binding vpn-instance command to delete the binding. Syntax ip binding vpn-instance vpn-instance-name undo ip binding vpn-instance vpn-instance-name Parameters vpn-instance-name Default By default, global routing table is used.
3Com Router 5000 Family and Router 6000 Family Command Reference ip route-static vpn-instance ● 43 ip route-static vpn-instance Purpose Use the ip route-static vpn-instance command to configure a static route, by specifying a private network interface as the outgoing-interface of this static route. When using a multi-role host, you can configure a static route in a private network with an interface of another private network or public network as its outgoing-interface.
44 ● ip route-static vpn-instance Example 3Com Router 5000 Family and Router 6000 Family Command Reference Configure a static route with destination address 100.1.1.1 and next hop address 1.1.1.2. [3Com ] ip route-static vpn-instance vpn1 100.1.1.1 16 vpn-instance vpn1 1.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference ip vpn-instance ● 45 ip vpn-instance Purpose Use the ip vpn-instance command to create and configure a vpn-instance. Use the undo ip vpn-instance command to delete the specified vpn-instance. Use the ip vpn-instance command to create a vpn-instance named vpn-name. Syntax ip vpn-instance vpn-instance-name undo ip vpn-instance vpn-instance-name Parameters vpn-instance-name Default By default, vpn-instance is not defined.
46 ● ipv4-family 3Com Router 5000 Family and Router 6000 Family Command Reference ipv4-family Purpose Use the ipv4-family multicast command to enter MBGP multicast address family view. Use the undo ipv4-family multicast command to delete the configuration of the specified multicast address family view. Use the ipv4-family vpn-instance command to enter MBGP vpn-instance address family view.
3Com Router 5000 Family and Router 6000 Family Command Reference Enter VPNv4 address family view.
48 ● lsp-trigger 3Com Router 5000 Family and Router 6000 Family Command Reference lsp-trigger Purpose Use the lsp-trigger command to configure topology-triggered LSP creation policy. Use the undo lsp-trigger command to remove the filtering conditions specified by parameters and disable LSP trigger creation at any route. Syntax lsp-trigger { all | ip-prefix ip-prefix } undo lsp-trigger { all | ip-prefix [ ip-prefix ] } Parameters all Triggers LSPs at any route.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ● 49 mpls Purpose Use the mpls command in system view to enable MPLS globally and enter MPLS view. Use the undo mpls command in system view to disable MPLS globally. Use the mpls command in interface view to enable MPLS on the interface. Use the undo mpls command in interface view to disable MPLS on the interface. Syntax mpls undo mpls Parameters None Default By default, MPLS is not enabled.
50 ● mpls label advertise 3Com Router 5000 Family and Router 6000 Family Command Reference mpls label advertise Purpose Use the mpls label advertise command to specify at the egress the type of the label to be distributed to the penultimate hop. Use the undo mpls label advertise command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference Description mpls label advertise ● 51 When the keyword explicit-null is selected, the m-layer label of a packet with m-layer label parameter is popped at the penultimate LSR of the LSP, instead of at the egress LSR. This can lower the stack operation demands at egress node and somewhat mitigate the load on the egress node. If the explicit null label is assigned to the penultimate hop, it can only reside at the bottom of the label stack.
52 ● mpls ldp 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp Purpose Use the mpls ldp command to enable LDP. Use the undo mpls ldp command to disable LDP. Syntax mpls ldp undo mpls ldp Parameters None Default By default, LDP is disabled. Example Enable LDP. [3Com ] mpls ldp View This command can be used in the following views: ■ System view Description Before enabling LDP, you must enable MPLS and configure LSR ID first.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp enable ● 53 mpls ldp enable Purpose Use the mpls ldp enable command to enable LDP on the interface. Use the undo mpls ldp enable command to disable LDP on an interface. Syntax mpls ldp enable mpls ldp disable Parameters None Default By default, LDP is disabled on the interface. Example Enable LDP on the interface.
54 ● mpls ldp hops-count 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp hops-count Purpose Use the mpls ldp hops-count command to set the maximum hops of loop detection. Use the undo mpls ldp hops-count command to restore the default value. Syntax mpls ldp hops-count hop-number undo mpls ldp hops-count Parameters hop-number Default By default, the maximum hops of loop detection are 32. Example Set the maximum hops of loop detection to 22.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp loop-detect ● 55 mpls ldp loop-detect Purpose Use the mpls ldp loop-detect command to enable loop detection. Use the undo mpls ldp loop-detect command to disable loop detection. Syntax mpls ldp loop-detect undo mpls ldp loop-detect Parameters None Default By default, loop detection is disabled in the system. Example Enable loop detection. [3Com ] mpls ldp loop-detect Disable loop detection.
56 ● mpls ldp password 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp password Purpose Use the mpls ldp password command to configure LDP authentication mode. Use the undo mpls ldp password command to delete the configuration. Syntax mpls ldp password { cipher | simple } password undo mpls ldp password Parameters Example simple Transmits password in plain text. cipher Transmits password in encrypted text (MD5). password User password.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp path-vectors ● 57 mpls ldp path-vectors Purpose Use the mpls ldp path-vectors command to set the maximum value of path vector. Use the undo mpls ldp path-vectors command to restore the default maximum value of path vector. Syntax mpls ldp path-vectors pv-number undo mpls ldp path-vectors Parameters pv-number Default By default, pv-number is 32.
58 ● mpls ldp remote-peer 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp remote-peer Purpose Use the mpls ldp remote-peer command to create a remote-peer entity and enter remote-peer view. Use the undo mpls ldp remote-peer command to delete a remote-peer entity. You can use this command to create a remote-peer and accordingly create remote session Syntax mpls ldp remote-peer Index undo mpls ldp remote-peer Index Parameters Index Example Create a remote-peer.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp reset-session ● 59 mpls ldp reset-session Purpose Use the mpls ldp reset-session command to reset a specified session on an interface. Syntax mpls ldp reset-session peer-address Parameters peer-address Example Reset the session at the interface Ethernet0/0/0. Corresponding LDP Peer address (in IP address format). [3Com -Ethernet0/0/0] mpls ldp reset-session 10.1.1.
60 ● mpls ldp timer 3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp timer Purpose Use the mpls ldp timer command to set the duration of a Hello hold timer or session hold timer. Use the undo mpls ldp timer command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls ldp transport-ip ● 61 mpls ldp transport-ip Purpose Use the mpls ldp transport-ip command to configure an LDP session transport address. Use the undo mpls ldp transport-ip command to restore the default LDP transport address. Syntax mpls ldp transport-ip { interface | ip-address } undo mpls ldp transport-ip Parameters interface Sets the IP address of the current interface as the transport address.
62 ● mpls lsr-id 3Com Router 5000 Family and Router 6000 Family Command Reference mpls lsr-id Purpose Use the mpls lsr-id command to configure an LSR ID. Use the undo mpls lsr-id command to delete an LSR ID. Syntax mpls lsr-id ip-address undo mpls lsr-id Parameters ip-address Default By default, no LSR has an ID. Example Set the ID of the LSR to 202.17.41.246. LSR ID, with the format like IP address, used to identify an LSR. [3Com ] mpls lsr-id 202.17.41.246 % Mpls lsr-id changed.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls static-l2vc ● 63 mpls static-l2vc Purpose Use the mpls static-l2vc command to create an SVC MPLS L2VPN connection. Use the undo mpls static-l2vc command to delete the connection.
64 ● mpls l2vc 3Com Router 5000 Family and Router 6000 Family Command Reference mpls l2vc Purpose Use the mpls l2vc command to create an LDP connection. Use the undo mpls l2vc command to delete the connection. Syntax mpls l2vc ip-address vc-id [ atm-cell [ atm-1to1-vcc | atm-1to1-vpc ] ] undo mpls l2vc Parameters Example ip-address lsr-id address of peer PE. vc-id ID of the VC, ranging from 1 to 4294967295. atm-cell N-to-one encapsulation mode for ATM cell transparent transmission.
3Com Router 5000 Family and Router 6000 Family Command Reference mpls l2vpn encapsulation ● 65 mpls l2vpn encapsulation Purpose Use the mpls l2vpn encapsulation command to create Kompella MPLS L2VPN, specify encapsulation type, and enter MPLS L2VPN view. Use the undo mpls l2vpn encapsulation command to remove the encapsulation.
66 ● mpls l2vpn encapsulation Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ ce ■ mtu
3Com Router 5000 Family and Router 6000 Family Command Reference mpls l2vpn Purpose Use the mpls l2vpn command to enable L2VPN. Use the undo mpls l2vpn command to disable L2VPN. Syntax mpls l2vpn undo mpls l2vpn Parameters None Example Enter MPLS view, configure LSR ID, and enable MPLS. [3Com ] undo mpls [3Com -mpls] mpls lsr-id 10.0.0.1 [3Com ] mpls Enable L2VPN.
68 ● mtu 3Com Router 5000 Family and Router 6000 Family Command Reference mtu Purpose Use the mtu command to configure MTU of Kompella MPLS L2VPN. Syntax mtu mtu Parameters mtu Example Configure the mtu of VPN “Huawei” as 1000. Layer2 MTU value of VPN. MTU defaults to 1500.
3Com Router 5000 Family and Router 6000 Family Command Reference peer default-route-advertise ● 69 peer default-route-advertise Purpose Use the peer default-route-advertise command to enable a peer (group) to import a default route. Use the undo peer default-route-advertise command to remove the existing configuration. This command does not require any default route in the routing table but transmits a default route with the next hop being itself to the peer unconditionally.
70 ● peer enable 3Com Router 5000 Family and Router 6000 Family Command Reference peer enable Purpose Use the peer enable command to activate the specified peer (group) in L2VPN address family view. Use the undo peer enable command to deactivate the specified peer (group) in L2VPN address family view. Syntax peer { group-name | peer-address } enable undo peer { group-name | peer-address } enable Parameters group-name Peer group name, refers to the whole peer group.
3Com Router 5000 Family and Router 6000 Family Command Reference peer label route-capability ● 71 peer label route-capability Purpose Use the peer label-route-capability command to enable the capability of a peer to process IPv4 routes with labels. Use the undo peer label-route-capability command to disable the capability.
72 ● peer next-hop-invariable 3Com Router 5000 Family and Router 6000 Family Command Reference peer next-hop-invariable Purpose Use the peer next-hop-invariable command to configure the invariable next hop when sending routes to EBGP peers. Use the undo peer next-hop-invariable command to restore the default configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference ospf vpn instance ● 73 ospf vpn instance Purpose Use the ospf command to enable an OSPF process. Use the undo ospf command to disable an OSPF process. Syntax ospf process-id [ router-id router-id-number ] vpn-instance vpn-instance-name undo ospf process-id Parameters process-id OSPF process ID. By default, it is set to 1. router-id-number Router ID for an OSPF process. It is optional.
74 ● ospf vpn instance 3Com Router 5000 Family and Router 6000 Family Command Reference To enable an OSPF process belonging to a public network without router ID, the following conditions should be satisfied: ■ RM is configured with router ID. ■ There is an interface configured with an IP address. If you enable an OSPF process without specify router ID, and the process is to be bound to a VPN instance, the VPN instance should have an interface that is configured with an IP address.
3Com Router 5000 Family and Router 6000 Family Command Reference peer upe ● 75 peer upe Purpose Use the peer upe command to configure BGP peer as the UPE of hierarchical BGP/MPLS VPN. Use the undo peer upe command to delete this configuration. Syntax peer peer-address upe undo peer peer-address} upe Parameters peer-address Example Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN. IP address of a peer. [3Com -bgp] ipv4-family vpnv4 [3Com -bgp-af-vpn] peer 1.1.1.
76 ● policy vpn-target 3Com Router 5000 Family and Router 6000 Family Command Reference policy vpn-target Purpose Use the policy vpn-target command to filter the received routing information according to the VPN-target extended community attributes. Use the undo policy vpn-target command to remove the filtering. Syntax policy vpn-target undo policy vpn-target Parameters None Default By default, the received routing information is filtered according to the VPN-target extended community attributes.
3Com Router 5000 Family and Router 6000 Family Command Reference remote-ip ● 77 remote-ip Purpose Use the remote-ip command to configure a remote IP address. The address should be the LSR ID of the remote LSR. As remote peers adopt LSR ID as their transport addresses, the last two remote peers use their LSR ID as their transport addresses for creating TCP connection. Syntax remote-ip ip-address Parameters ip-address Example Configure the address of remote-peer. IP address of a remote peer.
78 ● reset mpls cell-transfer interface 3Com Router 5000 Family and Router 6000 Family Command Reference reset mpls cell-transfer interface Purpose Use the reset mpls cell-transfer interface command to reset statistics for the cells received/sent in a packet on an interface in transparent transmission mode. Syntax reset mpls cell-transfer interface [ interface-type interface-num |all] Parameters all interface-type interface-num Resets statistics for all transparent transmission interfaces.
3Com Router 5000 Family and Router 6000 Family Command Reference reset mpls statistics ● 79 reset mpls statistics Purpose Use the reset mpls statistics command to clear MPLS statistics. You can use this command to clear the statistics on all or one interface(s); or the statistics on all or one LSP(s).
80 ● route-distinguisher 3Com Router 5000 Family and Router 6000 Family Command Reference route-distinguisher Purpose Use the route-distinguisher command to configure RD for an MPLS VPN instance. A vpn-instance cannot run until it is configured with an RD. Syntax route-distinguisher route-distinguisher Parameters route-distinguisher Example Configure RD for an MPLS VPN instance.
3Com Router 5000 Family and Router 6000 Family Command Reference route-tag ● 81 route-tag Purpose Use the route-tag command to specify a tag value to identify VPN import route. Use the undo route-tag command to restore the default value. Syntax route-tag tag-number undo route-tag Parameters tag-number Example Configure route-tag 100 to OSPF process 100. Tag value to identify VPN import route, in range of 0 to 4294967295.
82 ● route-tag 3Com Router 5000 Family and Router 6000 Family Command Reference If the route-tag included in the type-5/-7 LSA is identical with its existing tag, the LSA received will be neglected in route calculation. CAUTION: To validate the configured route-tag, you must execute the reset ospf command.
3Com Router 5000 Family and Router 6000 Family Command Reference routing-table limit ● 83 routing-table limit Purpose Use the routing-table limit command to limit the route maximum in a vpn-instance, to avoid too many routes in the ingress interface of the PE router. Use the undo routing-table limit command to remove the limitation.
84 ● sham-link 3Com Router 5000 Family and Router 6000 Family Command Reference sham-link Purpose Use the sham-link command to configure a sham link. Use the undo sham-link command to delete a sham link.
3Com Router 5000 Family and Router 6000 Family Command Reference Example sham-link ● 85 Configure a sham link, with source address 1.1.1.1 and destination address 2.2.2.2. [3Com -ospf-100-area-0.0.0.1] sham-link 1.1.1.1 2.2.2.2 cost 100 View This command can be used in the following views: ■ Description OSPF Area view In the OSPF PE-CE connection, suppose that in an OSPF area there are two sites belonging to the same VPN.
86 ● snmp-agent trap enable ldp 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap enable ldp Purpose Use the snmp-agent trap enable ldp command to enable Trap function in MPLS LDP creation. Use the undo snmp-agent trap enable ldp command to disable Trap function in MPLS LDP creation. Syntax snmp-agent trap enable ldp undo snmp-agent trap enable ldp Parameters None Default By default, TRAP function is not enabled during MPLS LDP creation.
3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap enable lsp ● 87 snmp-agent trap enable lsp Purpose Use the snmp-agent trap enable lsp command to enable Trap function in MPLS LSP creation. Use the undo snmp-agent trap enable lsp command to disable Trap function in MPLS LSP creation. Syntax snmp-agent trap enable lsp undo snmp-agent trap enable lsp Parameters None Default By default, TRAP function is disabled during MPLS LSP creation.
88 ● static-lsp egress 3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp egress Purpose Use the static-lsp egress command to configure a static LSP for an egress LSR. Use the undo static-lsp egress command to delete an LSP for an egress LSR. Syntax static-lsp egress lsp-name incoming-interface interface-type interface-num in-label in-label-value undo static-lsp egress lsp-name Parameters Example lsp-name Name of LSP. interface-type Type of network interface.
3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp egress l2vpn ● 89 static-lsp egress l2vpn Purpose Use the static-lsp egress l2vpn command to configure a static LSP used in L2VPN for egress LSR. Use the undo static-lsp egress l2vpn command to delete an LSP used in L2VPN of egress LSR.
90 ● static-lsp ingress 3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp ingress Purpose Use the static-lsp ingress command to configure a static LSP for the ingress LSR. Use the undo static-lsp ingress command to delete an LSP for the ingress LSR.
3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp ingress l2vpn ● 91 static-lsp ingress l2vpn Purpose Use the static-lsp egress l2vpn command to configure a static LSP used in L2VPN for ingress LSR. Use the undo static-lsp egress l2vpn command to delete an LSP used in L2VPN of ingress LSR.
92 ● static-lsp transit 3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp transit Purpose Use the static-lsp transit command to configure a static LSP for a transit LSR. Use the undo static-lsp transit command to delete an LSP for a transit LSR.
3Com Router 5000 Family and Router 6000 Family Command Reference static-lsp transit l2vpn ● 93 static-lsp transit l2vpn Purpose Use the static-lsp transit command to configure a static LSP used in L2VPN for transit LSR. Use the undo static-lsp transit command to delete an LSP used in L2VPN of transit LSR.
94 ● ttl expiration 3Com Router 5000 Family and Router 6000 Family Command Reference ttl expiration Purpose Use the ttl expiration command to configure the router to forward ICMP responses by local IP routing when the MPLS TTL expires. Use the undo ttl expiration command to disable the function. Use the undo mpls command to clear all the configurations related to the ttl expiration command.
3Com Router 5000 Family and Router 6000 Family Command Reference ttl propagate ● 95 ttl propagate Purpose Use the ttl propagate command to enable IP TTL duplication of MPLS. Use the undo ttl propagate command to disable IP TTL duplication of MPLS. Syntax ttl propagate { public | vpn } undo ttl propagate { public | vpn } Parameters Example public Configures to apply TTL duplication to the packets on the public network. vpn Configures to apply TTL duplication to the VPN packets.
96 ● vpn-instance-capability simple 3Com Router 5000 Family and Router 6000 Family Command Reference vpn-instance-capability simple Purpose Use the routing-table limit command to configure a router as Multi-VPN-Instance CE. Use the undo routing-table limit command to remove the configuration. Syntax vpn-instance-capability simple undo vpn-instance-capability Parameters None Example Configure OSPF procedure 100 as Multi-VPN-Instance CE.
3Com Router 5000 Family and Router 6000 Family Command Reference vpn-target ● 97 vpn-target Purpose Use the vpn-target command to create vpn-target extended community for vpn-instance. Use the undo vpn-target command to remove the vpn-target extended community attributes.
98 ● vpn-target 3Com Router 5000 Family and Router 6000 Family Command Reference Extended community has the following formats: 16-bit ASN: a 32-bit number defined by user, for example, 100:1. 32-bit IP address: a 16-bit number defined by user, for example, 172.1.1.1:1.
3Com Router 5000 Family and Router 6000 Family Command Reference l2vpn-family ● 99 l2vpn-family Purpose Use the l2vpn-family command to create or enter an L2VPN address family view. Use the undo l2vpn-family command to delete an L2VPN address family view. Syntax l2vpn-family undo l2vpn-family Parameters None Default By default, it is BGP unicast view. Example Create an L2VPN address family view.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 SECURITY ALPHABETICAL LISTING OF COMMANDS access-limit 7 accounting 8 accounting 10 accounting 11 accounting-on 12 accounting optional 14 acl 15 acl-reflect timeout 16 aging-time 17 ah authentication-algorithm 18 aspf-policy 19 authentication-method 20 authentication-algorithm 21 authentication 22 authentication 23 authentication 25 authorization 27 authorization 29 ca identifier 30 certificate request entity 31 certificate request from
2● 3Com Router 5000 Family and Router 6000 Family Command Reference debugging web url-filter host 60 debugging web url-filter parameter 61 detect 62 dh 64 display acl 65 display aspf all 66 display aspf interface 67 display aspf policy 68 display aspf session 69 display connection 71 display domain 73 display encrypt-card fast-switch 75 display encrypt-card sa 76 display encrypt-card statistics 78 display encrypt-card syslog 79 display firewall-statistics 80 display hwatacs 81 display ike dpd 83 display i
3Com Router 5000 Family and Router 6000 Family Command Reference firewall default 137 firewall enable 138 firewall fragments-inspect 139 firewall fragments-inspect {high | low} 140 firewall packet-filter 141 fqdn 143 hwatacs change-password self 144 hwatacacs nas-ip 145 hwatacacs scheme 146 id-type 147 ldap-server 148 ike dpd 149 ike local-name 150 ike next-payload check disabled 151 ike peer (IPSec Policy view or IPSec Policy Template view) 152 ike peer (System view) 153 ike proposal 154 ike sa keepalive-
4● 3Com Router 5000 Family and Router 6000 Family Command Reference pki request-certificate 195 pki retrieval-certificate 196 pki retrieval-crl 197 pki validate-certificate 198 play stop-accounting-buffer 199 port-mapping 201 portal 202 portal all-resource-id 203 portal auth-network 204 portal fast-authentication 205 portal free-ip 206 portal free-user 207 portal method 209 portal resource 210 portal server 211 portal service-type 213 portal update-resource 214 portal update-resource-id 215 portal upload-
3Com Router 5000 Family and Router 6000 Family Command Reference retry stop-accounting 253 retry stop-accounting 254 root-certificate fingerprint 255 rule 256 sa authentication-hex 261 sa duration 263 sa duration 265 sa encryption-hex 266 sa spi 268 sa string-key 270 scheme 272 secondary accounting 274 secondary accounting 275 secondary authentication 276 secondary authentication 277 secondary authorization 278 security acl 279 security-policy-server 281 server type 282 service type 283 service-type ppp 28
6● 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host acl-number 318 web url-filter host add 319 web url-filter host default 321 web url-filter host delete 322 web url-filter host delete-all 323 web url-filter host enable 324 web url-filter host ip-address 325 web url-filter host load-file 326 web url-filter host save-file 327 web url-filter parameter add 328 web url-filter parameter add-default 329 web url-filter parameter delete 330 web url-filter parameter delete-all 3
3Com Router 5000 Family and Router 6000 Family Command Reference access-limit ● 7 access-limit Purpose Use the access-limit command to configure a limit to the amount of supplicants in the current ISP domain. Use the undo access-limit command to restore the limit to the default setting. Syntax access-limit { disable | enable max-user-number } undo access-limit Parameters disable No limit to the supplicant number in the current ISP domain.
8 ● accounting 3Com Router 5000 Family and Router 6000 Family Command Reference accounting Purpose Use the accounting command to set the IP address, port number and shared key for the primary and secondary HWTACACS accounting servers. Use the undo accounting command to delete the configured accounting servers.
3Com Router 5000 Family and Router 6000 Family Command Reference accounting ● 9 The HWTACACS client (the router) and HWTACACS server use the MD5 algorithm to encrypt the exchanged packets between them. The two ends verify the packets using a shared key. Only when the same key is used can they properly receive the packets and make responses. Thus, the shared key on the router must be the same with that on the HWTACACS server.
10 ● accounting 3Com Router 5000 Family and Router 6000 Family Command Reference accounting Purpose Use the accounting command to configure an accounting scheme for the current ISP domain. Use the undo accounting command to remove the accounting scheme used by the ISP domain. Syntax accounting { hwtacacs-scheme hwtacacs-scheme-name | radius-scheme radius-scheme-name | none } undo accounting Parameters hwtacacs-scheme radius-scheme-name Specifies the HWTACACS scheme for accounting.
3Com Router 5000 Family and Router 6000 Family Command Reference accounting ● 11 accounting Purpose Use the accounting command to set the IP address, port number and shared key for the primary and secondary RADIUS accounting servers. Use the undo accounting command to restore them to default value.
12 ● accounting-on 3Com Router 5000 Family and Router 6000 Family Command Reference accounting-on Purpose Use the accounting-on enable command to enable the user re-authentication at reboot function. Use the undo accounting-on enable command to disable the user re-authentication at reboot function. Use the undo accounting-on send command to restore the default maximum times for sending Accounting-On packets.
3Com Router 5000 Family and Router 6000 Family Command Reference accounting-on ● 13 ■ When receiving an Accounting-On packet, the CAMS server sends a response packet to the router, locates and deletes information about the original online users according to information about NAS-ID, NAS-IP, and session ID in the Accounting-On packet, and ends the accounting based on the last accounting update packet.
14 ● accounting optional 3Com Router 5000 Family and Router 6000 Family Command Reference accounting optional Purpose Use the accounting optional command to enable optional accounting. Use the undo accounting optional command to disable it. Syntax accounting optional undo accounting optional Parameters None Default By default, optional accounting is disabled. Example Enable optional accounting for users in the domain 3Com163.net. [3Com] domain 3Com163.net [3Com-isp-3Com163.
3Com Router 5000 Family and Router 6000 Family Command Reference acl ● 15 acl Purpose Use the acl command to create an access control list and enter ACL view. Use the undo acl command to delete an access control list. Syntax acl number acl-number [ match-order { config | auto } ] undo acl { number acl-number | all } Parameters Example number Defines a numbered access control list (ACL). acl-number ACL number.
16 ● acl-reflect timeout 3Com Router 5000 Family and Router 6000 Family Command Reference acl-reflect timeout Purpose Use the acl-reflect timeout command to set the global aging time for reflexive ACL. Use the undo acl-reflect timeout command to restore the aging time to default value. Syntax acl-reflect timeout time undo acl-reflect timeout Parameters time Default By default, the global aging time for reflexive ACL is 300 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference aging-time ● 17 aging-time Purpose Use the aging-time command to configure SYN status waiting timeout value and FIN status waiting timeout value of TCP, session entry idle timeout value of TCP and UDP. Use the undo aging-time command to restore the default value.
18 ● ah authentication-algorithm 3Com Router 5000 Family and Router 6000 Family Command Reference ah authentication-algorithm Purpose Use the ah authentication-algorithm command to set the authentication algorithm adopted by Authentication Header protocol in IPSec proposal. Use the undo ah authentication-algorithm command to restore the default setting. Syntax ah authentication-algorithm { md5 | sha1 } undo ah authentication-algorithm Parameters md5 MD5 algorithm is adopted.
3Com Router 5000 Family and Router 6000 Family Command Reference aspf-policy ● 19 aspf-policy Purpose Use the aspf-policy command to define an ASPF policy. For a defined policy, the policy can be invoked through its policy number. Syntax aspf-policy aspf-policy-number undo aspf-policy aspf-policy-number Parameters aspf-policy-number Example Define an ASPF policy and enter ASPF view. ASPF policy number, ranging from 1 to 99.
20 ● authentication-method 3Com Router 5000 Family and Router 6000 Family Command Reference authentication-method Purpose Use the authentication-method command to select the authentication method used by an IKE proposal. Use the undo authentication-method command to restore the authentication method used by an IKE proposal to the default.
3Com Router 5000 Family and Router 6000 Family Command Reference authentication-algorithm ● 21 authentication-algorithm Purpose Use the authentication-algorithm command to select the authentication algorithm for an IKE proposal. Use the undo authentication-algorithm command to restore the authentication algorithm for an IKE proposal to the default. Syntax authentication-algorithm { md5 | sha } undo authentication-algorithm Parameters md5 Selects the authentication algorithm: HMAC-MD5.
22 ● authentication 3Com Router 5000 Family and Router 6000 Family Command Reference authentication Purpose Use the authentication command to set the IP address, port number and shared key for the primary and secondary RADIUS authentication servers. Use the undo authentication command to restore them to default value.
3Com Router 5000 Family and Router 6000 Family Command Reference authentication ● 23 authentication Purpose Use the authentication command to configure an authentication scheme for the current ISP domain. Use the undo authentication command to restore the default authentication scheme of the domain.
24 ● authentication 3Com Router 5000 Family and Router 6000 Family Command Reference local authentication scheme is used only when the RADIUS server or TACACS server is not available. If you want the system to use the local scheme as the first scheme, the local authentication scheme is the only scheme for authentication, and you cannot configure any RADIUS or HWTACACS scheme at the same time. That is, you can only specify the local keyword in the authentication command.
3Com Router 5000 Family and Router 6000 Family Command Reference authentication ● 25 authentication Purpose Use the authentication command to set the IP address, port number and shared key for the primary and secondary HWTACACS authentication servers. Use the undo authentication command to delete the configured authentication servers.
26 ● authentication 3Com Router 5000 Family and Router 6000 Family Command Reference You can remove a server that cannot be removed otherwise, only when it is not used by any active TCP connection for sending authentication packets. The HWTACACS client (the router) and HWTACACS server use the MD5 algorithm to encrypt the exchanged packets between them. The two ends verify the packets using a shared key. Only when the same key is used can they properly receive the packets and make responses.
3Com Router 5000 Family and Router 6000 Family Command Reference authorization ● 27 authorization Purpose Use the authorization command to set the IP address, port number and shared key for the primary and secondary HWTACACS authorization servers. Use the undo authorization command to delete the configured authorization servers.
28 ● authorization 3Com Router 5000 Family and Router 6000 Family Command Reference The HWTACACS client (the router) and HWTACACS server use the MD5 algorithm to encrypt the exchanged packets between them. The two ends verify the packets using a shared key. Only when the same key is used can they properly receive the packets and make responses. Thus, the shared key on the router must be the same with that on the HWTACACS server.
3Com Router 5000 Family and Router 6000 Family Command Reference authorization ● 29 authorization Purpose Use the authorization command to configure an authorization scheme for the current ISP domain. Use the undo authorization command to restore the default authorization scheme of the domain. Syntax authorization { hwtacacs-scheme hwtacacs-scheme-name | none } undo authorization Parameters hwtacacs-scheme hwtacacs-scheme-name none Specifies the HWTACACS scheme for authorization.
30 ● ca identifier 3Com Router 5000 Family and Router 6000 Family Command Reference ca identifier Purpose Use the ca identifier command to specify the CA this device trusts and have the "name" CA bound with this device. Use the undo ca identifier command to delete the CA this device trusts. Syntax ca identifier name undo ca identifier Parameters name Default By default, no trusted CA is specified.
3Com Router 5000 Family and Router 6000 Family Command Reference certificate request entity ● 31 certificate request entity Purpose Use the certificate request entity command to specify the name of the entity for certificate request. Use the undo certificate request entity command to delete the entity for certificate request. Syntax certificate request entity entity-name undo certificate request entity Parameters entity-name Default By default, no entity is specified for certificate request.
32 ● certificate request from 3Com Router 5000 Family and Router 6000 Family Command Reference certificate request from Purpose Use the certificate request from command to choose between CA and RA to register for certificate request. Use the undo certificate request from command to undo the selected registration agent. Syntax certificate request from { ca | ra } undo certificate request from Parameters ca Indicates that the entity registers by CA for certificate request.
3Com Router 5000 Family and Router 6000 Family Command Reference certificate request mode ● 33 certificate request mode Purpose Use the certificate request mode command to decide between the manual or the auto request mode. Use the undo certificate request mode command to restore the default request mode.
34 ● certificate request polling 3Com Router 5000 Family and Router 6000 Family Command Reference certificate request polling Purpose Use the certificate request polling command to specify the interval between two polls and the retry times. Use the undo certificate request polling command to restore the default parameters.
3Com Router 5000 Family and Router 6000 Family Command Reference certificate request url ● 35 certificate request url Purpose Use the certificate request url command to specify the server URL for certificate request through SCEP protocol. SCEP is a protocol specialized in the communication with authentication authorities. Use the undo certificate request url command to delete the concerned location setting.
36 ● common-name 3Com Router 5000 Family and Router 6000 Family Command Reference common-name Purpose Use the common-name command to specify the common name of an entity, take User name for example. Use the undo common-name command to delete the common name of this entity. Syntax common-name name-str undo common-name Parameters name-str Default By default, no common name is specified for any entity. Example Configure the common name of an entity Common name of an entity.
3Com Router 5000 Family and Router 6000 Family Command Reference country ● 37 country Purpose Use the country command to specify the code of the country to which the entity belongs. It is a standard 2-byte code, e.g., CN for China. Use the undo country command to delete the country code of this entity. Syntax country country-code-str undo country Parameters country-code-str Default By default, no country code is specified for any entity.
38 ● crl check disable 3Com Router 5000 Family and Router 6000 Family Command Reference crl check disable Purpose Use the crl check disable command to disable CRL checking. Use the undo crl check disable command to enable CRL checking. Syntax crl check disable undo crl check disable Parameters None Default By default, CRL checking is enabled. Example Disable CRL checking.
3Com Router 5000 Family and Router 6000 Family Command Reference crl update-period ● 39 crl update-period Purpose Use the crl update-period command to specify the update period of CRL, which is the interval between local downloads of CRLs from CRL access server. Use the undo crl update-period command to restore the default CRL update period. Syntax crl update-period hours undo crl update-period Parameters hours Default By default, it updates according to CRL validity period.
40 ● crl url 3Com Router 5000 Family and Router 6000 Family Command Reference crl url Purpose Use the crl url command to specify the distribution point URL for CRL. Use the undo crl url command to undo the specification. Syntax crl url url-string undo crl url Parameters url-string Default By default, no CRL distribution point URL is specified. Example Specify the URL location of CRL database Refers to the distribution point location of CRL.
3Com Router 5000 Family and Router 6000 Family Command Reference data-flow-format ● 41 data-flow-format Purpose Use the data-flow-format command to configure the unit of data flows sent to the TACACS server. Use the undo data-flow-format command to restore the default. Syntax data-flow-format data [ byte | giga-byte | kilo-byte | mega-byte ] data-flow-format packet [ giga-packet | kilo-packet | mega-packet | one-packet ] undo data-flow-format [ data | packet ] Parameters data Sets data unit.
42 ● data-flow-format 3Com Router 5000 Family and Router 6000 Family Command Reference data-flow-format Purpose Use the data-flow-format command to configure the unit in which data flows are sent to a RADIUS Server. Use the undo data-flow-format command to restore the unit to the default setting. Syntax data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-packet | kilo- packet | mega-packet | one-packet } undo data-flow-format Parameters data Sets data unit.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging aspf ● 43 debugging aspf Purpose Use the debugging aspf command to enable ASPF debugging function. Use the undo debugging aspf command to disable ASPF debugging function.
44 ● debugging encrypt-card 3Com Router 5000 Family and Router 6000 Family Command Reference debugging encrypt-card Purpose Use the debugging encrypt-card command to enable debugging on the specified or all encryption cards. Use the undo debugging encrypt-card command to disable debugging on the encryption card.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging firewall ● 45 debugging firewall Purpose Use the debugging firewall command to enable the information debugging of the firewall packet filtering. Use the undo debugging firewall command to disable the information debugging of the firewall packet filtering.
46 ● debugging hwatacs 3Com Router 5000 Family and Router 6000 Family Command Reference debugging hwatacs Purpose Use the debugging hwtacacs command to enable HWTACACS debugging. Use the undo debugging hwtacacs command to disable HWTACACS debugging. Syntax debugging hwtacacs { all | error | event | message | receive-packet | send-packet } undo debugging hwtacacs { all | error | event | message | receive-packet | send-packet } Parameters all Specifies all HWTACACS debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ike ● 47 debugging ike Purpose Use the debugging ike command to enable IKE debugging. Use the undo debugging ike command to disable IKE debugging. Syntax debugging ike { all | error | exchange | message | misc | transport} undo debugging ike { all | error | exchange | message | misc | transport} Parameters all All IKE debugging functions. error IKE error debugging information.
48 ● debugging ike dpd 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ike dpd Purpose Use the debugging ike dpd command to enable IKE DPD debugging. Use the undo debugging ike dpd command to disable IKE DPD debugging. Syntax debugging ike dpd undo debugging ike dpd Parameters None Example Enable IKE DPD debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipsec ● 49 debugging ipsec Purpose Use the debugging ipsec command to turn IPSec debugging on. Use the undo debugging ipsec command to turn IPSec debugging off.
50 ● debugging local-server 3Com Router 5000 Family and Router 6000 Family Command Reference debugging local-server Purpose Use the debugging local-server command to enable debugging for the local RADIUS authentication server. Use the undo debugging local-server command to disable debugging for the local RADIUS authentication server.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pki ● 51 debugging pki Purpose Use the debugging pki command to enable PKI debugging functions. Use the undo debugging pki command to disable PKI debugging functions.
52 ● debugging pki 3Com Router 5000 Family and Router 6000 Family Command Reference host_name: 169.254.0.100 SCEP transaction id: 58D41D0C5A7B1E21C5F4A008B580B1A1 PKCS#7 envelope: creating inner PKCS#7 PKCS#7 envelope: data payload size: 297 bytes data payload: ….
3Com Router 5000 Family and Router 6000 Family Command Reference debugging pki ● 53 [RouterCA] debugging pki validation [RouterCA] pki validate-certificate local domain 1 Verify certificate...... Serial Number: 101E266A 00000000 006B Issuer: emailAddress=myca@3Com.
54 ● debugging pki Description 3Com Router 5000 Family and Router 6000 Family Command Reference Unexpected problems do occur during the device operation. Debugging commands enable the optional output and print of debugging information, facilitating the network monitor and fault diagnosis for the network operators and developers.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging portal ● 55 debugging portal Purpose Use the debugging portal command to enable portal debugging. Use the undo debugging portal command to disable portal debugging. Syntax debugging portal undo debugging portal Parameters None Example Enable portal debugging. debugging portal 1) The normal process for direct authentication: *0.1765820 3Com PORTAL/8/PT_DEBUG: User Index 9 State Change: VOID -> DISCOVERED *0.
56 ● debugging portal 3Com Router 5000 Family and Router 6000 Family Command Reference *0.3107100 3Com PORTAL/8/PT_DEBUG: User Index 12 State Change: WAIT_AUTH_ACK -> VOID 4) The process for accounting failure: *0.3792140 3Com PORTAL/8/PT_DEBUG: User Index 14 State Change: VOID -> DISCOV ERED *0.3792240 3Com PORTAL/8/PT_DEBUG: User Index 14 State Change: DISCOVERED -> WAIT_AUTH_ACK *0.3792500 3Com PORTAL/8/PT_DEBUG: User Index 14 State Change: WAIT_AUTH_ACK -> WAIT_NEW_IP *0.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging portal ● 57 *0.6923900 3Com PORTAL/8/PT_DEBUG: User Index 17 State Change: WAIT_LEAVING_A CK -> VOID Table 1 Description on the fields of the debugging portal command Field Description VOID -> DISCOVERED : The user migrates from the VOID state to the DISCOVERED state. DISCOVERED -> WAIT_AUTH_ACK: The user migrates from the DISCOVERED state to the WAIT_AUTH_ACK state (waiting for authentication acknowledgement).
58 ● debugging radius 3Com Router 5000 Family and Router 6000 Family Command Reference debugging radius Purpose Use the debugging radius command to enable RADIUS debugging. Use the undo debugging radius command to disable RADIUS debugging. Syntax debugging radius packet undo debugging radius packet Parameters packet Default By default, RADIUS debugging is disabled. Example Enable RADIUS debugging. Enables packet debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging web java-blocking ● 59 debugging web java-blocking Purpose Use the debugging web java-blocking command to enable the Java blocking debugging. Use the undo debugging web java-blocking command to disable the debugging Syntax debugging web java-blocking{ all | error | event | filter | packet } undo debugging web java-blocking{ all | error | event | filter | packet } Parameters Example all All debugging functions.
60 ● debugging web url-filter host 3Com Router 5000 Family and Router 6000 Family Command Reference debugging web url-filter host Purpose Use the debugging web url-filter host command to enable the URL address filtering debugging. Use the undo debugging web url-filter host command to disable the debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging web url-filter parameter ● 61 debugging web url-filter parameter Purpose Use the debugging web url-filter parameter command to enable the URL paramater filtering debugging. Use the undo debugging web url-filter parameter command to disable the debugging.
62 ● detect 3Com Router 5000 Family and Router 6000 Family Command Reference detect Purpose Use the detect command to specify ASPF policy for application layer protocols. Use the undo detect command to cancel the configuration. SyntaxSyntax detect protocol [ java-blocking acl-number ] [ aging-time seconds ] undo detect protocol Parameters Example protocol Name of the protocol supported by ASPF.
3Com Router 5000 Family and Router 6000 Family Command Reference detect ● 63 setting applicable to all sessions; it can protect system resources against malicious occupation.
64 ● dh 3Com Router 5000 Family and Router 6000 Family Command Reference dh Purpose Use the dh command to select the Diffie-Hellman group for an IKE proposal. Use the undo dh command to restore the Diffie-Hellman group for an IKE proposal to the default. Syntax dh { group1 | group2 | group5 | group14 } undo dh Parameters group1 Selects group1, that is, the 768-bit Diffie-Hellman group, for key negotiation at phase 1 of IKE.
3Com Router 5000 Family and Router 6000 Family Command Reference display acl ● 65 display acl Purpose Use the display acl command to view the rules of access control list. Syntax display acl { all | acl-number } Parameters all All ACL rules. acl-number ACL expressed by number. Example Display the contents of ACL 2000 rule. [3Com] display acl 2000 Total ACL Number: 1 Basic ACL 2000, 2 rules, Acl’s step is 1 rule 1 permit (0 times matched) rule 2 permit source 1.1.1.
66 ● display aspf all 3Com Router 5000 Family and Router 6000 Family Command Reference display aspf all Purpose Use the display aspf all command to view the information of all ASPF policies and sessions. Syntax display aspf all Parameters None Example View the information of ASPF policy and session.
3Com Router 5000 Family and Router 6000 Family Command Reference display aspf interface ● 67 display aspf interface Purpose Use the display aspf interface command to view the interface configuration of the inspection policy. Syntax display aspf interface Parameters None Example View the interface configuration of the inspection policy.
68 ● display aspf policy 3Com Router 5000 Family and Router 6000 Family Command Reference display aspf policy Purpose Use the the display aspf policy command to view the configuration of a specific inspection policy. Syntax display aspf policy aspf-policy-number Parameters aspf-policy-number Example Display the configuration information of the inspection policy with policy number of 1. ASPF policy number. Valid values are 1 to 99.
3Com Router 5000 Family and Router 6000 Family Command Reference display aspf session ● 69 display aspf session Purpose Use the display aspf session command to view the information of the ASPF sessions. Syntax display aspf session [ verbose ] Parameters verbose Example Display information on current ASPF sessions. Displays the detailed information of the sessions. [3Com] display aspf session [Established Sessions] Session Initiator Responder Application 212BA84 169.254.1.121:1427 169.254.1.
70 ● display aspf session View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display connection ● 71 display connection Purpose Use the display connection command to view the relevant information on the specified user connection or all the connections. The output can help you troubleshoot user connections.
72 ● display connection 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display connection command View Field Description Index Index number Username User name IP IP address of the user This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display domain ● 73 display domain Purpose Use the display domain command to view the configuration of a specified ISP domain or display the summary information of all ISP domains. Syntax display domain [ isp-name ] Parameters isp-name Default By default, the summary of all ISP domains is displayed. Example Display configuration information for the test domain.
74 ● display domain 3Com Router 5000 Family and Router 6000 Family Command Reference and format, as the displayed information of the display domain command. The output information can help with ISP domain diagnosis and troubleshooting.
3Com Router 5000 Family and Router 6000 Family Command Reference display encrypt-card fast-switch ● 75 display encrypt-card fast-switch Purpose Use the display encrypt-card fast-switch command to view the entries in the fast forwarding cache for the encryption cards. Syntax display encrypt-card fast-switch Parameters None Example Display the entries in the fast forwarding cache for the encryption cards.
76 ● display encrypt-card sa 3Com Router 5000 Family and Router 6000 Family Command Reference display encrypt-card sa Purpose Use the display encrypt-card sa command to view SA information. Syntax display encrypt-card sa [ slot-id ] Parameters slot-id Example Display all SA information on the encryption card at slot 5/0/0. Slot ID for the encryption card, whose range depends on the slot number on the router.
3Com Router 5000 Family and Router 6000 Family Command Reference Description display encrypt-card sa ● 77 The command is only available on encryption cards. These kinds of information shall be displayed: SA proposal name, local address, remote address, remaining SA remaining key duration, schedule performance index (SPI), slot ID, and other similar information.
78 ● display encrypt-card statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display encrypt-card statistics Purpose Use the display encrypt-card statistics command to view statistics on the specified or all encryption cards. Syntax display encrypt-card statistics [ slot-id ] Parameters slot-id Example Display the statistics on the encryption card at slot 5/0/0. Slot ID for the encryption card, whose range depends on the number of slots on the router.
3Com Router 5000 Family and Router 6000 Family Command Reference display encrypt-card syslog ● 79 display encrypt-card syslog Purpose Use the display encrypt-card syslog command to view the current system log on the encryption cards. Syntax display encrypt-card syslog [ slot-id ] Parameters slot-id Example Display the system log on the encryption card at slot 5/0/0. Slot ID for the encryption card, whose range depends on the number of slots on the router.
80 ● display firewall-statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display firewall-statistics Purpose Use the display firewall-statistics command to view the firewall statistics. Syntax display firewall-statistics { all | interface type number | fragments-inspect } Parameters all Displays the filtering packet statistics of all the interfaces. interface type number Specifies an interface by its type and number.
3Com Router 5000 Family and Router 6000 Family Command Reference display hwatacs ● 81 display hwatacs Purpose Use the display hwtacacs command to view configuration information of specified or all HWTACACS schemes.
82 ● display hwatacs 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display radius statistics command (continued) Field Description Primary-authentication-server IP address and port number of the primary authentication server Primary-authentication-server IP address and port number of the primary authentication server Primary-authentication-server IP address and port number of the primary authentication server Primary-authentication-server
3Com Router 5000 Family and Router 6000 Family Command Reference display ike dpd ● 83 display ike dpd Purpose Use the display ike dpd command to display the configuration of the specified or all DPD structures about reference count, interval-time, and time_out. Syntax display ike dpd [ dpd-name ] Parameters dpd-name Example Display information about all the configured DPD structures. DPD structure name.
84 ● display ike peer 3Com Router 5000 Family and Router 6000 Family Command Reference display ike peer Purpose Use the display ike peer command to view the configuration about the specified or all IKE peers. Syntax display ike peer [ peer-name ] Parameters peer-name Example Display the configuration about all IKE peers. Name of an IKE peer.
3Com Router 5000 Family and Router 6000 Family Command Reference display ike proposal ● 85 display ike proposal Purpose Use the display ike proposal command to view the parameters configured for each IKE proposal. Syntax display ike proposal Parameters None Example Display the IKE proposal information after two IKE proposals are configured.
86 ● display ike sa 3Com Router 5000 Family and Router 6000 Family Command Reference display ike sa Purpose Use the display ike sa command to view the current security tunnels established by IKE. Syntax display ike sa [ verbose ] Parameters verbose Example View detailed information about the security tunnels established by IKE. Specifies to display detailed information.
3Com Router 5000 Family and Router 6000 Family Command Reference display ike sa ● 87 Table 1 Description on the fields of the display ike sa verbose command (continued) Field Description remaining key duration(sec) Remaining lifetime of the SA exchange-mode IKE negotiation mode, master mode or aggressive mode diffie-hellman group Diffie-Hellman group used by the IKE proposal nat traversal Supports NAT traversal View the security tunnels established by IKE.
88 ● display ike sa View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Related Command Any view ike proposal
3Com Router 5000 Family and Router 6000 Family Command Reference display interface encrypt ● 89 display interface encrypt Purpose Use the display interface encrypt command to view information about interfaces on the specified or all encryption cards. Syntax display interface encrypt [ slot-id ] Parameters slot-id Example Display the port information on the encryption card at slot 5/0/0. Slot ID for the encryption card, whose range depends on the slot number on the router.
90 ● display ipsec policy 3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec policy Purpose Use the display ipsec policy command to view information about the ipsec policy. Syntax display ipsec policy [ brief | name policy-name [ seq-number ] ] Parameters brief Displays brief information about all the ipsec policies. name Displays information of the ipsec policy with the name policy-name and sequence number seq-number. policy-name Name of an ipsec policy.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec policy ● 91 security data flow : 100 selector mode: per-session tunnel remote address: 162.105.10.
92 ● display ipsec policy Description 3Com Router 5000 Family and Router 6000 Family Command Reference The brief keyword is used for displaying brief information about all the ipsec policies, whose display format is the brief format (see the following example). The brief command can be used for quick display of all the ipsec policies. Brief information includes: name and sequence number, negotiation mode, access control list, proposal, local address, and remote address.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec policy-template ● 93 display ipsec policy-template Purpose Use the display ipsec policy-template command to view information about the ipsec policy template. Syntax display ipsec policy-template [ brief | name template-name [ seq-number ] ] Parameters brief Displays brief information about all the ipsec policy templates.
94 ● display ipsec policy-template Related Command ipsec policy-template 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec proposal ● 95 display ipsec proposal Purpose Use the display ipsec proposal command to view information about the proposal. Syntax display ipsec proposal [ proposal-name ] Parameters proposal-name Example View all the proposals. Name of the proposal.
96 ● display ipsec sa 3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec sa Purpose Use the display ipsec sa command to view the relevant information about the SA. Syntax display ipsec sa [ brief | remote ip-address | policy policy-name [ seq-number ] | duration ] Parameters brief Displays brief information about all the SAs. remote Displays information about the SA with remote address as ip-address. ip-address Specifies the remote address in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec sa ● 97 Interface: Ethernet1/0/0 path MTU: 1500 =============================== ---------------------------------IPsec policy name: "policy_isakmp" sequence number: 10 mode: isakmp ---------------------------------connection id: 4 in use settings = {tunnel} tunnel local : 162.105.10.1 tunnel remote : 162.105.10.
98 ● display ipsec sa Description 3Com Router 5000 Family and Router 6000 Family Command Reference The command with brief parameter shows brief information about all the SAs, whose display format is the brief format (refer to the following example). Brief information includes source address, destination address, SPI, protocol, and algorithm. A display beginning with "E" in the algorithm stands for the encryption algorithm, and a display beginning with "A" stands for the authentication algorithm.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipsec statistics ● 99 display ipsec statistics Purpose Use the display ipsec statistics command to view the IPSec packet statistics information, including the input and output security packet statistics, bytes, number of packets discarded and detailed description of discarded packets. Syntax display ipsec statistics Parameters None Example View IPSec packet statistics.
100 ● display local-server statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display local-server statistics Purpose Use the display local-server statistics command to display statistics of the local RADIUS authentication server. Syntax display local-server statistics Parameters None Example Display statistics of the local RADIUS authentication server.
3Com Router 5000 Family and Router 6000 Family Command Reference display local-user ● 101 display local-user Purpose Use the display local-user command to view the relevant information on the specified local user or all the local users. The output can help you troubleshoot faults related to local user.
102 ● display local-user 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display local-user command Field Description State State of the user: active or block ServiceType Mask Service type abbreviation: C: terminal A: pad P: PPP F: FTP S: SSH T: telnet Idle-Cut State of idle-cut switch Access-Limit Access limit setting Current AccessNum Count of current accesses Bind location Information on the binding of the service to port VLAN ID
3Com Router 5000 Family and Router 6000 Family Command Reference display pki certificate ● 103 display pki certificate Purpose Use the display pki certificate command to display and browse through the certificate.
104 ● display pki certificate View Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view ■ pki retrieval-certificate ■ pki domain ■ certificate request polling
3Com Router 5000 Family and Router 6000 Family Command Reference display pki crl ● 105 display pki crl Purpose Use the display pki crl command to display and browse through the locally saved CRL. Syntax display pki crl domain domain-name Parameters domain-name Example Display a CRL Represents the domain of the certificate about to be verified. It is configured by using the pki domain command.
106 ● display port-mapping 3Com Router 5000 Family and Router 6000 Family Command Reference display port-mapping Purpose Use the display port-mapping command to view PAM information. Syntax display port-mapping [ application-name | port port-number ] Parameters application-name Specifies the name of application for PAM. Optional applications include ftp, http, h323, smtp and rtsp. port-number Port number. Valid values are 0 to 65535. Example Display all PAM information.
3Com Router 5000 Family and Router 6000 Family Command Reference display portal ● 107 display portal Purpose Use the display portal command to display the information about portal servers Syntax display portal [ acm statistics | auth-network [ auth-interface interface-type interface-num ] | free-user | free-ip | interface [ interface-type interface-num ] | server [ server-name ] | | server statistics | tcp-cheat statistics] Parameters acm statistics Displays the accumulative statistics of the ACM mo
108 ● display portal 3Com Router 5000 Family and Router 6000 Family Command Reference No Free User Update Resource: 1)IP = 192.168.0.201 Mask = 255.255.255.255 2)IP = 192.168.0.202 Mask = 255.255.0.0 Portal Server: 1)pt: IP = 192.168.0.200 Key = 3Com Port = 50100 URL = "http://192.168.0.
3Com Router 5000 Family and Router 6000 Family Command Reference display portal ● 109 PT_MSG_UPDATE 0 PT_MSG_TMR_AUT 0 PT_MSG_TMR_LGN 0 PT_MSG_TMR_LGT 0 PT_MSG_TMR_LEV 0 PT_MSG_TMR_NIP 0 PT_MSG_TMR_USERIPCHANGE 0 PT_MSG_TMR_REQAUTH 0 ERROR Statistics: MEM Error: 0 RCV MSG ERR: 0 SND MSG ERR: 0 Table 2 Description on the fields of the display portal acm statistics command Field Description ACM Statistics Statistics of the state machine, indicating the number of users in each state.
110 ● display portal View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display portal update-resource ● 111 display portal update-resource Purpose Use the display portal update-resource command to display information about the update resources configured by the user. Syntax display portal update-resource Parameters None Example Display information about the update resources configured by the user. [Router] display portal update-resource Update Resource: 1)IP = 1.1.1.1 Mask = 255.255.255.255 2)IP = 2.2.2.
112 ● display radius 3Com Router 5000 Family and Router 6000 Family Command Reference display radius Purpose Use the display radius command to view the configuration information about the specified or all RADIUS schemes or to view statistics about RADIUS.
3Com Router 5000 Family and Router 6000 Family Command Reference display radius ● 113 Table 1 Information about RADIUS server configuration View Field Description Second Auth IP/ Port/ State IP address/access port number/current state of the secondary authentication server Second Acct IP/ Port/ State IP address/access port number/current state of the secondary accounting server Auth Server Encryption Key Shared key of the authentication server Acct Server Encryption Key Shared key of the accoun
114 ● display radius statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display radius statistics Purpose Use the display radius statistics command to view the statistics information on RADIUS packets. The displayed packet information can help you troubleshoot RADIUS faults. Syntax display radius statistics Parameters None Example Display the statistics information on RADIUS packets.
3Com Router 5000 Family and Router 6000 Family Command Reference display radius statistics ● 115 Timer_Err State Mismatch :0 :0 Alloc_Mem_Err Other_Error :0 :0 No-response-acct-stop packet =0 Discarded No-response-acct-stop packet for buffer overflow =0 Table 1 Description on the fields of the display radius statistics command Field Description state statistic(total=1048) DEAD=1047 AuthSucc=0 AuthProc=0 AcctStart=0 RLTSend=0 RLTWait=1 AcctStop=0 OnLine=1 Stop=0 StateErr=0State statistics for
116 ● display radius statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the fields of the display radius statistics command (continued) Field Description RADIUS received messages statistic: Statistics about received messages for RADIUS, providing count of messages, errors, and successes of each type.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Related Command Any view radius scheme display radius statistics ● 117
118 ● display stop-accounting-buffer 3Com Router 5000 Family and Router 6000 Family Command Reference display stop-accounting-buffer Purpose Use the display stop-accounting-buffer command to view information on the stop-accounting requests buffered in the router.
3Com Router 5000 Family and Router 6000 Family Command Reference display time-range ● 119 display time-range Purpose Use the display time-range command to view the configuration and the status of time range. For the active time range at present, it displays "active" and for the inactive time range, it displays "inactive". Syntax display time-range { all | time-name } Parameters time-name Name of the time range. all Displays all the configured time ranges. Example Display all time ranges.
120 ● display web java-blocking 3Com Router 5000 Family and Router 6000 Family Command Reference display web java-blocking Purpose Use the display web java-blocking command to display the information about Java blocking. Syntax display web java-blocking { enable | all | extension keywords | extension-all } Parameters enable Displays the information about enabling Java blocking. all Displays all information about Java blocking.
3Com Router 5000 Family and Router 6000 Family Command Reference display web url-filter host ● 121 display web url-filter host Purpose Use the display web url-filter host command to display information about URL address filtering. Syntax display web url-filter host { enable | all | item url-address | item-all } Parameters enable Displays the information about enabling URL address filtering. all Displays all information about URL address filtering.
122 ● display web url-filter parameter 3Com Router 5000 Family and Router 6000 Family Command Reference display web url-filter parameter Purpose Use the display web url-filter parameter command to display the filtering information about SQL attack. Syntax display web url-filter parameter { enable | all | item keywords | item-all } Parameters enable Displays the information about enabling SQL attack protection. all Displays all filtering information about SQL attack protection.
3Com Router 5000 Family and Router 6000 Family Command Reference domain ● 123 domain Purpose Use the domain command to configure an ISP domain or enter the view of an existing ISP domain. Use the undo domain command to cancel a specified ISP domain. Syntax domain [ isp-name | default { disable | enable isp-name } ] undo domain isp-name Parameters isp-name Specifies an ISP domain name.
124 ● domain 3Com Router 5000 Family and Router 6000 Family Command Reference userid@isp-name format, the system takes the part "userid" as username for identification and takes the part "isp-name" as domain name. The purpose of introducing ISP domain settings is to support the application environment with multiple ISP domains. In this case, an access device may have supplicants from different ISP domains.
3Com Router 5000 Family and Router 6000 Family Command Reference dpd ● 125 dpd Purpose Use the dpd command to reference a DPD structure. Use the undo dpd command to remove the referenced DPD structure. Syntax dpd dpd-name undo dpd Parameters dpd-name Example Configure IKE peer 1 to reference DPD structure aaa. DPD structure name. [3Com-ike-peer-peer1] dpd aaa Remove the DPD structure referenced by IKE peer 1.
126 ● encapsulation-mode 3Com Router 5000 Family and Router 6000 Family Command Reference encapsulation-mode Purpose Use the encapsulation-mode command to set the encapsulation mode that the security protocol applies to IP packets, which can be transport or tunnel. Use the undo encapsulation-mode command to restore it to the default. Syntax encapsulation-mode { transport | tunnel } undo encapsulation-mode Parameters transport Sets that the encapsulation mode of IP packets is transport mode.
3Com Router 5000 Family and Router 6000 Family Command Reference encapsulation-mode ● 127 two security gateways is not of the security gateway’s own. So the transport mode is not often used between security gateways. The proposal used by the ipsec policies set at both ends of the security tunnel must be set as having the same packet encapsulation mode.
128 ● encrypt-card backuped 3Com Router 5000 Family and Router 6000 Family Command Reference encrypt-card backuped Purpose Use the encrypt-card backuped command to enable backup function for the encryption card. Use the undo encrypt-card backuped command to disable backup function for the encryption card. Syntax encrypt-card backuped undo encrypt-card backuped Parameters None Default By default, backup function for the encryption card is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference encrypt-card fast-switch ● 129 encrypt-card fast-switch Purpose Use the encrypt-card fast-switch command to enable the fast forwarding function of the encryption card. Use the undo encrypt-card fast-switch command to disable the fast forwarding function of the encryption card.
130 ● encryption-algorithm 3Com Router 5000 Family and Router 6000 Family Command Reference encryption-algorithm Purpose Use the encryption-algorithm command to specify the encryption algorithm for an IKE proposal. Use the undo encryption-algorithm command to restore to the default. Syntax encryption-algorithm { des-cbc | 3des-cbc | aes-cbc [ 128 |192 |256 ] } undo encryption-algorithm Parameters des-cbc Selects the 56-bit DES-CBC encryption algorithm for an IKE proposal.
3Com Router 5000 Family and Router 6000 Family Command Reference esp authentication-algorithm ● 131 esp authentication-algorithm Purpose Use the esp authentication-algorithm command to set the authentication algorithm used by ESP. Use the undo esp authentication-algorithm command to set ESP not to authenticate packets. Syntax esp authentication-algorithm { md5 | sha1 } undo esp authentication-algorithm Parameters md5 Use MD5 algorithm with the length of the key 128 bits.
132 ● esp authentication-algorithm Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ ipsec proposal ■ esp encryption-algorithm ■ proposal ■ transform
3Com Router 5000 Family and Router 6000 Family Command Reference esp encryption-algorithm ● 133 esp encryption-algorithm Purpose Use the esp encryption-algorithm command to set the encryption algorithm adopted by ESP. Use the undo esp encryption-algorithm command to set the ESP not to encrypt packets.
134 ● esp encryption-algorithm 3Com Router 5000 Family and Router 6000 Family Command Reference ■ transform
3Com Router 5000 Family and Router 6000 Family Command Reference exchange-mode ● 135 exchange-mode Purpose Use the exchange-mode command to select an IKE negotiation mode. Use the undo exchange-mode command to restore the default negotiation mode. By default, main mode is adopted. Syntax exchange-mode { aggressive | main } undo exchange-mode Parameters Example aggressive Aggressive mode main Main mode. Adopt the main mode for IKE negotiation.
136 ● firewall aspf 3Com Router 5000 Family and Router 6000 Family Command Reference firewall aspf Purpose Use the firewall aspf command to apply ASPF policy in specified direction to an interface. Use the undo firewall aspf command to delete the applied ASPF policy on the interface. Syntax firewall aspf aspf-policy-number { inbound | outbound } undo firewall aspf aspf-policy-number { inbound | outbound } Parameters Example aspf-policy-number ASPF policy number used on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference firewall default ● 137 firewall default Purpose Use the firewall default command to configure the default filtering rule of the firewall, whether to be “permit” or “deny”. Syntax firewall default { permit | deny } Parameters permit Default filter rule is permitting packets to pass. deny Default filter rule is denying packets to pass. Default By default, the system permits packets.
138 ● firewall enable 3Com Router 5000 Family and Router 6000 Family Command Reference firewall enable Purpose Use the firewall enable command to enable the firewall. Use the undo firewall enable command to disable the firewall. Syntax firewall enable undo firewall enable Parameters None Default By default, the firewall is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference firewall fragments-inspect ● 139 firewall fragments-inspect Purpose Use the firewall fragments-inspect command to enable fragment inspection switch. Use the undo firewall fragments-inspect command to disable fragment inspection switch. Syntax firewall fragments-inspect undo firewall fragments-inspect Parameters None Default By default, fragment inspection switch is disabled.
140 ● firewall fragments-inspect {high | low} 3Com Router 5000 Family and Router 6000 Family Command Reference firewall fragments-inspect {high | low} Purpose Use the firewall fragments-inspect { high | low } command to configure the high and low thresholds of records for fragment inspection. Use the undo firewall fragments-inspect { high | low } command to restore the default high and low thresholds.
3Com Router 5000 Family and Router 6000 Family Command Reference firewall packet-filter ● 141 firewall packet-filter Purpose Use the firewall packet-filter command to apply the access control list to the corresponding interface. Use the undo firewall packet-filter command to delete the corresponding setting.
142 ● firewall packet-filter 3Com Router 5000 Family and Router 6000 Family Command Reference For the layer 4 matching rules in an advanced ACL to take effect, you must first configure the firewall fragments-inspect command on the firewall to enable fragment inspection, making the firewall record the layer 4 information in the first fragment of a packet to obtain complete matching information about the non-first-fragments.
3Com Router 5000 Family and Router 6000 Family Command Reference fqdn ● 143 fqdn Purpose Use the fqdn command to specify the FQDN of an entity. Use the undo fqdn command to delete the entity FQDN. Syntax fqdn name-str undo fqdn Parameters name-str Default By default, no entity FQDN is specified. Example Configure the FQDN of an entity FQDN of an entity, within the range of 1 to 127 characters [RouterCA-pki-entity-1] fqdn pki.3Com-3com.
144 ● hwatacs change-password self 3Com Router 5000 Family and Router 6000 Family Command Reference hwatacs change-password self Purpose Use the hwtacacs change-password self command to enable the TACACS online user to change the password. Syntax hwtacacs change-password self Parameters None Example Change the old password. <3Com > hwtacacs change-password self please waitting for connection with tacacs server......
3Com Router 5000 Family and Router 6000 Family Command Reference hwatacacs nas-ip ● 145 hwatacacs nas-ip Purpose Use the hwtacacs nas-ip command to specify the source address of the hwtacacs packet sent from NAS. Use the undo hwtacacs nas-ip command to restore the default setting. Syntax hwtacacs nas-ip ip-address undo hwtacacs nas-ip Parameters ip-address Default By default, the source address is not specified, that is, the address of the interface sending the packet serves as the source address.
146 ● hwatacacs scheme 3Com Router 5000 Family and Router 6000 Family Command Reference hwatacacs scheme Purpose Use the hwtacacs scheme command to enter HWTACACS Server view. If the specified HWTACACS server scheme does not exist, you can create a new HWTACACS scheme. Use the .undo hwtacacs scheme command to delete an HWTACACS scheme.
3Com Router 5000 Family and Router 6000 Family Command Reference id-type ● 147 id-type Purpose Use the id-type command to select the type of ID used in IKE negotiation. Use the undo id-type command to restore the default setting. By default, IP address is the ID used in IKE negotiation. Syntax id-type { ip | name } undo id-type Parameters Example ip Selects IP address as the ID used in IKE negotiation. name Selects name as the ID used in IKE negotiation.
148 ● ldap-server 3Com Router 5000 Family and Router 6000 Family Command Reference ldap-server Purpose Use the ldap-server ip command to configure the LDAP server IP address and the port. Use the undo ldap-server ip command to cancel the related configuration. Syntax ldap-server ip ip-address [ port port-num ] [ version version-number ] undo ldap-server ip Parameters ip-address IP address of LDAP server. port-num Port number of the LDAP server. Valid values are 1 to 65535.
3Com Router 5000 Family and Router 6000 Family Command Reference ike dpd ● 149 ike dpd Purpose Use the ike dpd command to create a DPD structure and enter its view. Use the undo ike dpd command to delete the specified DPD structure. Syntax ike dpd dpd-name undo ike dpd dpd-name Parameters dpd-name Example Create a DPD structure named aaa. Name of dead peer detection (DPD) structure. [3Com] ike dpd aaa Delete the DPD structure named aaa.
150 ● ike local-name 3Com Router 5000 Family and Router 6000 Family Command Reference ike local-name Purpose Use the ike local-name command to set the name of the local GW. Use the undo ike local-name command to restore the default name of the local GW. By default, router name is used as the name of the local GW.
3Com Router 5000 Family and Router 6000 Family Command Reference ike next-payload check disabled ● 151 ike next-payload check disabled Purpose Use the ike next-payload check disabled command to disable the router to check the next-payload field in the last payload of the IKE negotiation packet during IPSec negotiation for compatibility with other vendors. Use the undo ike next-payload check disabled command to restore the default, checking the next payload field.
152 ● ike peer (IPSec Policy view or IPSec Policy Template view) 3Com Router 5000 Family and Router 6000 Family Command Reference ike peer (IPSec Policy view or IPSec Policy Template view) Purpose Use the ike peer command to quote an IKE peer in an IPSec policy or IPSec policy template. Use the undo ike peer command to remove the quoted IKE peer from the IPSec policy or IPSec policy template.
3Com Router 5000 Family and Router 6000 Family Command Reference ike peer (System view) ● 153 ike peer (System view) Purpose Use the ike peer command to configure an IKE peer and access IKE-peer view. Use the undo ike peer command to delete an IKE peer. Syntax ike peer peer-name undo ike peer peer-name Parameters peer-name Example Configure an IKE peer “new_peer” and access its view. IKE peer name, which is comprised of a string of up to 15 characters.
154 ● ike proposal 3Com Router 5000 Family and Router 6000 Family Command Reference ike proposal Purpose Use the ike proposal command to define an IKE proposal. Use the undo ike proposal command to delete an IKE proposal. Syntax ike proposal proposal-number undo ike proposal proposal-number Parameters proposal-number Example Define IKE proposal 10. IKE proposal number. Valid values are 1 to 100. This value also stands for the priority. A smaller value stands for a higher priority.
3Com Router 5000 Family and Router 6000 Family Command Reference ike proposal ● 155 Both sides of the negotiation can be configured more than one IKE proposal. During the negotiation, the IKE proposals in both sides are selected to match one by one, by turns of their priority levels. The parameters that must be same during the match are encryption algorithm, authentication algorithm, authentication method, and DH group. The sa duration is decided by the initiator of the negotiation, needing no agreement.
156 ● ike sa keepalive-timer interval 3Com Router 5000 Family and Router 6000 Family Command Reference ike sa keepalive-timer interval Purpose Use the ike sa keepalive-timer interval command to configure the interval for sending Keepalive packet to the remote end through ISAKMP SA. Use the undo ike sa keepalive-timer interval command to disable the function.
3Com Router 5000 Family and Router 6000 Family Command Reference ike sa keepalive-timer timeout ● 157 ike sa keepalive-timer timeout Purpose Use the ike sa keepalive-timer timeout command to configure a timeout for ISAKMP SA to wait for the Keepalive packet. Use the undo ike sa keepalive-timer timeout command to disable the function. Syntax ike sa keepalive-timer timeout seconds undo ike sa keepalive-timer timeout Parameters seconds Default By default, this function is disabled.
158 ● ike sa nat-keepalive-timer interval 3Com Router 5000 Family and Router 6000 Family Command Reference ike sa nat-keepalive-timer interval Purpose Use the ike sa nat-keepalive-timer interval command to configure the NAT keepalive interval for IKE peers. Use the undo ike sa nat-keepalive-timer interval command to disable NAT keepalive for IKE peers.
3Com Router 5000 Family and Router 6000 Family Command Reference interface encrypt ● 159 interface encrypt Purpose Use the interface encrypt command to enter encryption card interface view. Syntax interface encrypt [ slot-id ] Parameters slot-id Example Enter the interface mode of the encryption card at slot 5/0/0. Slot ID for the encryption card, whose range depends on the slot number on the router.
160 ● interval-time 3Com Router 5000 Family and Router 6000 Family Command Reference interval-time Purpose Use the interval-time command to configure the interval for triggering DPD query. Use the undo interval-time command to restore the default. Syntax interval-time seconds undo interval-time Parameters seconds Example Set interval-time to 20 seconds. Interval for triggering DPD queries. Valid values are 1 to 300 seconds. If no value is specified, the default is 10 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference ip ● 161 ip Purpose Use the ip command to specify the IP address of an entity. Use the undo ip command to delete the specified IP address. Syntax ip ip-address undo ip Parameters ip-address Default By default, no entity IP address is specified. Example Configure the IP address of an entity IP address of an entity in the form of dotted decimal like A.B.C.D [RouterCA-pki-entity-1] ip 161.12.2.
162 ● ip pool 3Com Router 5000 Family and Router 6000 Family Command Reference ip pool Purpose Use the ip pool command to configure a local address pool for assigning addresses to PPP users. Use the undo ip pool command to delete the specified local address pool. Syntax ip pool pool-number low-ip-address [ high-ip-address ] undo ip pool pool-number Parameters pool-number low-ip-address and high-ip-address Address pool number. Valid values are 0 to 99.
3Com Router 5000 Family and Router 6000 Family Command Reference ipsec card-proposal ● 163 ipsec card-proposal Purpose Use the ipsec card-proposal command to create an SA proposal for the encryption card and enter the corresponding view. Use the undo ipsec card-proposal command to delete an SA proposal of the encryption card.
164 ● ipsec policy (Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference ipsec policy (Interface view) Purpose Use the ipsec policy(interface view) command to apply an ipsec policy group with the name policy-name at the interface,. Use the undo ipsec policy (interface view) command to remove one or all ipsec policy group from the interface so as to disable the IPSec function of the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ipsec policy (System view) ● 165 ipsec policy (System view) Purpose Use the ipsec policy command to establish or modify an ipsec policy, and enter IPSec policy view. Use the undo ipsec policy policy-name command to delete an IPSec policy group whose name is policy-name. Use the undo ipsec policy policy-name seq-number command to delete an IPSec policy whose name is policy-name and sequence number is seq-number.
166 ● ipsec policy (System view) Description 3Com Router 5000 Family and Router 6000 Family Command Reference Use the ipsec policy policy-name seq-number isakmp template template-name command to establish an ipsec policy according the template through IKE negotiation. Before using this command, the template should have been created. During the negotiation and policy matching, the parameters defined in the template should be compliant, the other parameters are decided by the initiator.
3Com Router 5000 Family and Router 6000 Family Command Reference ipsec policy-template ● 167 ipsec policy-template Purpose Use the ipsec policy-template command to establish or modify an IPSec policy template, and enter IPSec policy template view. Use the undo ipsec policy-template template-name command to delete the IPSec policy template group named template-name.
168 ● ipsec policy-template 3Com Router 5000 Family and Router 6000 Family Command Reference matched, and the settings of the initiator will be used if the corresponding arguments have not been configured.
3Com Router 5000 Family and Router 6000 Family Command Reference ipsec proposal ● 169 ipsec proposal Purpose Use the ipsec proposal proposal-name command to establish or modify a proposal named proposal-name, and enter IPSec proposal view. Use the undo ipsec proposal proposal-name command to delete the proposal named proposal-name. Syntax ipsec proposal proposal-name undo ipsec proposal proposal-name Parameters proposal-name Default By default, no proposal exists. Name of the specified proposal.
170 ● ipsec sa global-duration 3Com Router 5000 Family and Router 6000 Family Command Reference ipsec sa global-duration Purpose Use the ipsec sa global-duration command to set a global SA duration. Use the undo ipsec sa global-duration command to restore to the default setting of the global SA duration.
3Com Router 5000 Family and Router 6000 Family Command Reference ipsec sa global-duration ● 171 Modifying the global SA duration will not affect a map that has individually set up its own SA duration, or an SA already set up. But the modified global SA duration will be used to set up a new SA in the future IKE negotiation. The SA duration does not function for an SA manually set up, that is, the SA manually set up will never be invalidated.
172 ● level 3Com Router 5000 Family and Router 6000 Family Command Reference level Purpose Use the level command to configure user priority level. Use the undo level command to restore the default user priority level. Syntax level level undo level Parameters level Example Set the priority level of the user to 3. Specifies user priority level. Valid values are any integer between 0 and 3. If no value is specified, the default priority level is 0.
3Com Router 5000 Family and Router 6000 Family Command Reference local ● 173 local Purpose Use the local command to configure the subnet type in IKE negotiation. Use the undo local command to restore the default subnet type. You can use this command to enable interoperability between the router and a Netscreen device. Syntax local { multi-subnet | single-subnet } undo local Parameters multi-subnet Sets the subnet type to multiple. single-subnet Sets the subnet type to single.
174 ● local-address 3Com Router 5000 Family and Router 6000 Family Command Reference local-address Purpose Use the local-address command to configure the IP address of the local GW in IKE negotiation. Use the undo local-address command to delete the IP address of the local GW. Syntax local-address ip-address undo local-address Parameters ip-address Example Set the IP address of the local GW to 1.1.1.1. IP address of the local GW in IKE negotiation. [Router-ike-peer-xhy] local-address 1.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference local-server ● 175 local-server Purpose lUse the local-server command to configure a local RADIUS authentication server. Use the undo local-server command to delete a local RADIUS authentication server. Syntax local-server nas-ip ip-address key password undo local-server nas-ip ip-address Parameters nas-ip ip-address NAS-IP address of the access server, in dotted decimal format. By default, there is a local server with a NAS-IP of 127.
176 ● local-server Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ radius scheme ■ state
3Com Router 5000 Family and Router 6000 Family Command Reference local user ● 177 local user Purpose Use the local-user command to add a local user and enter the local user view. Use the undo local-user command to remove the specified local user.
178 ● local-user password-display-mode 3Com Router 5000 Family and Router 6000 Family Command Reference local-user password-display-mode Purpose Use the local-user password-display-mode command to configure the password display mode of all the local users. Use the undo local-user password-display-mode command to restore the default password display mode of all the local users.
3Com Router 5000 Family and Router 6000 Family Command Reference locality ● 179 locality Purpose Use the locality command to name the geographical locality of an entity, by a city for example. Use the undo locality command to cancel the mentioned naming operation. Syntax locality locality-str undo locality Parameters locality-str Default By default, no geographical locality is specified for any entity.
180 ● log enable 3Com Router 5000 Family and Router 6000 Family Command Reference log enable Purpose Use the log enable command to enable ASPF session logging function. Use the undo log enable command to disable logging function. Syntax log enable undo log enable Parameters None Default By default, session logging function is disabled. Example Enable ASPF session logging function.
3Com Router 5000 Family and Router 6000 Family Command Reference nas-ip ● 181 nas-ip Purpose Use the nas-ip command to have all the HWTACACS packets sent by the NAS (the router) carry the same source address. Use the undo nas-ip command to delete the setting. Syntax nas-ip ip-address undo nas-ip Parameters ip-address Default By default, the source IP address of a HWTACACS packet sent by the NAS is the IP address of the output port.
182 ● nas-ip 3Com Router 5000 Family and Router 6000 Family Command Reference nas-ip Purpose Use the nas-ip command to set the source IP address of the network access server (NAS, the router in this manual), so that all packets destined for the RADIUS server carry the same source IP address. Use the undo nas-ip command to cancel the configuration. Syntax nas-ip ip-address undo nas-ip Parameters ip-address Default By default, the source IP address of packets is the IP address of the output port.
3Com Router 5000 Family and Router 6000 Family Command Reference nat traversal ● 183 nat traversal Purpose Use the nat traversal command to configure the NAT traversal function of IKE/IPSec. Use the undo nat traversal command to disable the NAT traversal function of IKE/IPSec. Syntax nat traversal undo nat traversal Parameters None Example Configure the NAT traversal function under the IKE peer new_peer.
184 ● nesting 3Com Router 5000 Family and Router 6000 Family Command Reference nesting Purpose Use the nesting command to configure nesting rule. Use the undo nesting command to delete the rule. Syntax nesting acl-number undo nesting acl-number Parameters acl-number Default By default, the nesting rule is not configured. Example Configure to nest ACL3000 in ACL3001. Nesting ACL number. Valid values are 3000 to 3999.
3Com Router 5000 Family and Router 6000 Family Command Reference organization ● 185 organization Purpose Use the organization command to specify the name of the organization to which the entity belongs. Use the undo organization command to delete that name. Syntax organization org-str undo organization Parameters org-str Default By default, no organization name is specified for any entity.
186 ● organizational-unit 3Com Router 5000 Family and Router 6000 Family Command Reference organizational-unit Purpose Use the organizational-unit command to specify the name of the organization unit to which this entity belongs. Use the undo organizational-unit command to delete the specified organization unit name. Syntax organizational-unit org-unit-str undo organizational-unit Parameters org-unit-str Default By default, no organization unit name is specified for any entity.
3Com Router 5000 Family and Router 6000 Family Command Reference password ● 187 password Purpose Use the password command to configure a password for a local user. Use the undo password command to cancel the password of the local user. Syntax password { simple | cipher } password undo password Parameters Example simple Specifies to display passwords in simple text. cipher Specifies to display passwords in cipher text. password Defines a password.
188 ● peer 3Com Router 5000 Family and Router 6000 Family Command Reference peer Purpose Use the peer command to configure the subnet type in IKE negotiation. Use the undo peer command to restore the default subnet type. You can use this command to enable interoperability between the router and a Netscreen device. Syntax peer { multi-subnet | single-subnet } undo peer Parameters multi-subnet Sets the subnet type to multiple. single-subnet Sets the subnet type to single.
3Com Router 5000 Family and Router 6000 Family Command Reference pfs ● 189 pfs Purpose Use the pfs command to set the Perfect Forward Secrecy (PFS) feature for the IPSec policy to initiate the negotiation. Use the undo pfs command to set not to use the PFS feature during the negotiation. Syntax pfs { dh-group1 | dh-group2 | dh-group5 | dh-group14 } undo pfs Parameters dh-group1 Specifies that the 768-bit Diffie-Hellman group is used.
190 ● pfs 3Com Router 5000 Family and Router 6000 Family Command Reference ■ sa duration ■ proposal ■ tunnel local ■ tunnel remote
3Com Router 5000 Family and Router 6000 Family Command Reference pki delete-certificate ● 191 pki delete-certificate Purpose Use the pki delete-certificate command to delete the locally stored certificates. Syntax pki delete-certificate { local | ca } domain domain-name Parameters local Indicates the deletion of all local certificates that are locally stored; ca Indicates the deletion of all CA certificates that are locally stored.
192 ● pki domain 3Com Router 5000 Family and Router 6000 Family Command Reference pki domain Purpose Use the pki domain command to enter PKI domain view, and configure the parameters of LDAP server and for certificate request and authentication. Use the undo pki domain command to delete the specified PKI domain. Syntax pki domain name undo pki domain name Parameters name Default By default, no PKI domain name is specified.
3Com Router 5000 Family and Router 6000 Family Command Reference pki entity ● 193 pki entity Purpose Use the pki entity command to name a PKI entity and enter PKI entity view. Use the undo pki entity command to delete the name and cancel all configurations under the name space. Syntax pki entity name-str undo pki entity name-str Parameters name-str Default By default, entity name is not specified.
194 ● pki import-certificate 3Com Router 5000 Family and Router 6000 Family Command Reference pki import-certificate Purpose Use the pki import-certificate command to import an existing CA certificate or local certificate. Syntax pki import-certificate { local | ca } domain domain-name { der | p12 | pem } [ filename filename ] Parameters local Indicates the local certificate. ca Indicates the CA certificate. domain-name PKI domain where the certificate locates.
3Com Router 5000 Family and Router 6000 Family Command Reference pki request-certificate ● 195 pki request-certificate Purpose Use the pki request-certificate command to deliver certificate request through SCEP to CA for the generated RSA key pair. If SCEP fails to go through normal communication, you can print the local certificate request in base64 format using the optional parameter PKCS#10, copy it, and send one to CA in an outband mode.
196 ● pki retrieval-certificate 3Com Router 5000 Family and Router 6000 Family Command Reference pki retrieval-certificate Purpose Use the pki retrieval-certificate command to download a certificate from the certificate issuing server. Syntax pki retrieval-certificate { local | ca } domain domain-name Parameters local Indicates the download of a local certificate; ca Indicates the download of a CA certificate; domain-name Contains CA or RA related information.
3Com Router 5000 Family and Router 6000 Family Command Reference pki retrieval-crl ● 197 pki retrieval-crl Purpose Use the pki retrieval-crl command to obtain the latest CRL from CRL server for the verification of the validity of a current certificate. Syntax pki retrieval-crl domain domain-name Parameters domain-name Example Retrieve a CRL Contains CA or RA related information. It is configured by using the pki domain command.
198 ● pki validate-certificate 3Com Router 5000 Family and Router 6000 Family Command Reference pki validate-certificate Purpose Use the pki validate-certificate command to verify the validity of a certificate. Syntax pki validate-certificate { local | ca } domain domain-name Parameters local Indicates the validation of a local certificate; ca Indicates the validation of a CA certificate; domain-name Specifies the domain of the certificate about to be verified.
3Com Router 5000 Family and Router 6000 Family Command Reference play stop-accounting-buffer ● 199 play stop-accounting-buffer Purpose Use the display stop-accounting-buffer command to view information on the stop-accounting requests buffered in the router by RADIUS scheme, session ID, or time range. The displayed packet information can help you troubleshoot RADIUS faults.
200 ● play stop-accounting-buffer Description Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference If receiving no response after sending a stop-accounting request to a RADIUS server, the router buffers the request packet and retransmits it. The number of allowed transmission attempts can be set using the retry stop-accounting command.
3Com Router 5000 Family and Router 6000 Family Command Reference port-mapping ● 201 port-mapping Purpose Use the port-mapping command to establish a mapping from the port to application layer protocol. Use the undo port-mapping command to delete the PAM ingress defined by the user.
202 ● portal 3Com Router 5000 Family and Router 6000 Family Command Reference portal Purpose Use the portal command to enable portal authentication on an interface. Use the undo portal command to disable portal authentication on an interface. Syntax portal server-name undo portal Parameters server-name Example Enable portal authentication on interface Ethernet0/0/0. Name of a configured portal server.
3Com Router 5000 Family and Router 6000 Family Command Reference portal all-resource-id ● 203 portal all-resource-id Purpose Use the portal all-resource-id command to configure the all-resource ID. Use the undo portal all-resource-id command to delete the all-resource ID. Syntax portal all-resource-id number undo portal all-resource-id Parameters number Default By default, no all-resource ID is configured. Example Set the all-resource ID to 2. All-resource ID.
204 ● portal auth-network 3Com Router 5000 Family and Router 6000 Family Command Reference portal auth-network Purpose Use the portal auth-network command to configure a network segment for portal authentication. Use the undo portal auth-network command to remove a specified authentication network segment or all authentication network segments.
3Com Router 5000 Family and Router 6000 Family Command Reference portal fast-authentication ● 205 portal fast-authentication Purpose Use the portal fast-authentication command to enable fast portal authentication. Use the undo portal fast-authentication command to disable fast portal authentication. Syntax portal fast-authentication server server-name user-name user-name password password undo portal fast-authentication server server-name Parameters server-name Name of the configured portal server.
206 ● portal free-ip 3Com Router 5000 Family and Router 6000 Family Command Reference portal free-ip Purpose Use the portal free-ip command to configure a free IP address. Use the undo portal free-ip command to remove a specified free IP addresses.
3Com Router 5000 Family and Router 6000 Family Command Reference portal free-user ● 207 portal free-user Purpose Use the portal free-user command to configure a portal authentication-free user. Use the undo portal free-user ip command to delete a specified authentication-free user. Use the undo portal free-user interface command to delete all authentication-free users on a specified interface. Use the undo portal free-user all command to delete all set authentication-free users.
208 ● portal free-user 3Com Router 5000 Family and Router 6000 Family Command Reference CAUTION: ■ In re-DHCP authentication mode, the IP address of an authentication-free user and the primary IP address of the interface must be on the same network segment. In direct authentication mode, the IP address of an authentication-free user and the IP address of the interface must be on the same network segment.
3Com Router 5000 Family and Router 6000 Family Command Reference portal method ● 209 portal method Purpose Use the portal method command to specify a portal authentication method. Use the undo portal method command to restore the default authentication method, that is, direct authentication. Syntax portal method { direct | redhcp } undo portal method Parameters Example direct Direct authentication. redhcp Re-DHCP authentication. Set the portal authentication method to redhcp.
210 ● portal resource 3Com Router 5000 Family and Router 6000 Family Command Reference portal resource Purpose Use the portal resource command to create an accessible-resource name. Use the undo portal resource command to restore the default accessible-resource name. Syntax portal resource resource-name undo portal resource Parameters resource-name Default The default accessible-resource name is 3Com. Example Create an accessible-resource name to sina. Name of accessible resource.
3Com Router 5000 Family and Router 6000 Family Command Reference portal server ● 211 portal server Purpose Use the portal server command to configure a portal server or modify the configuration of a portal server.
212 ● portal server 3Com Router 5000 Family and Router 6000 Family Command Reference CAUTION: ■ When configuring a portal server for the first time, you must specify its IP address. ■ To modify the parameters of a portal server which is referenced by an interface, you must first remove the portal server from the port. ■ The IP address of a portal server is a free IP address. If the number of free IP addresses has already reached the maximum number, the portal server configuration will fail.
3Com Router 5000 Family and Router 6000 Family Command Reference portal service-type ● 213 portal service-type Purpose Use the portal service-type command to set the portal authentication mode. Use the undo portal service-type command to restore the default portal authentication mode. Syntax portal service-type { normal | plus } undo portal service-type Parameters normal Sets the portal authentication mode to normal (or portal). plus Sets the portal authentication mode to portal+.
214 ● portal update-resource 3Com Router 5000 Family and Router 6000 Family Command Reference portal update-resource Purpose Use the portal update-resource command to add an IP address to update resources. Use the undo portal update-resource command to remove one or all IP addresses from update resources. Syntax portal update-resource ip ip-address [ mask mask ] undo portal update-resource { ip ip-address [ mask mask ] | all } Parameters ip-address IP address of update-resource.
3Com Router 5000 Family and Router 6000 Family Command Reference portal update-resource-id ● 215 portal update-resource-id Purpose Use the portal update-resource-id command to configure the update-resource ID. Use the undo portal update-resource-id command to delete the update-resource ID. Syntax portal update-resource-id number undo portal update-resource-id Parameters number Default By default, the update-resource ID is not configured. Example Set the update-resource ID to 1.
216 ● portal upload-ip 3Com Router 5000 Family and Router 6000 Family Command Reference portal upload-ip Purpose Use the portal upload-ip command to configure the IP address of the interface connected to the CAMS server. Use the undo portal upload-ip command to delete the IP address of the interface connected to the CAMS server.
3Com Router 5000 Family and Router 6000 Family Command Reference pre-shared-key ● 217 pre-shared-key Purpose Use the pre-shared-key command to configure a pre-shared key to be used in IKE negotiation. Use the undo pre-shared-key command to remove the pre-shared key used in IKE negotiation. Syntax pre-shared-key key undo pre-shared-key Parameters key Example Set the pre-shared key used in IKE negotiation to “abcde”. Specifies a pre-shared key, consisting of a string from 1 to 128 characters long.
218 ● primary accounting 3Com Router 5000 Family and Router 6000 Family Command Reference primary accounting Purpose Use the primary accounting command to configure a primary TACACS accounting server. Use the undo primary accounting command to delete the configured primary TACACS accounting server. Syntax primary accounting ip-address [ port ] undo primary accounting Parameters ip-address IP address of the server, a valid unicast address in dotted decimal format. port Port number of the server.
3Com Router 5000 Family and Router 6000 Family Command Reference primary accounting ● 219 primary accounting Purpose Use the primary accounting command to configure IP address and port number of the primary RADIUS accounting server. Use the undo primary accounting command to restore the default IP address and port number of the primary RADIUS accounting server.
220 ● primary authentication 3Com Router 5000 Family and Router 6000 Family Command Reference primary authentication Purpose Use the primary authentication command to configure a primary TACACS authentication server. Use the undo primary authentication command to delete the configured authentication server. Syntax primary authentication ip-address [ port ] undo primary authentication Parameters ip-address IP address of the server, a valid unicast address in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference primary authentication ● 221 primary authentication Purpose Use the primary authentication command to configure IP address and port number of the primary RADIUS authentication/authorization server. Use the undo primary authentication command to restore the default IP address and port number of the primary RADIUS authentication/authorization server.
222 ● primary authorization 3Com Router 5000 Family and Router 6000 Family Command Reference primary authorization Purpose Use the primary authorization command to configure a primary TACACS authorization server. Use the undo primary authorization command to delete the configured primary authorization server. Syntax primary authorization ip-address [ port ] undo primary authorization Parameters ip-address IP address of the server, a valid unicast address in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference proposal ● 223 proposal Purpose Use the proposal command to set the proposal used by the IPSec policy. Use the undo proposal command to cancel the proposal used by the IPSec policy. Syntax proposal proposal-name1 [ proposal-name2...proposal-name6 ] undo proposal [ proposal-name ] Parameters proposal-name1,…, proposal-name6 Name of the proposals adopted. Default By default, no proposal is used.
224 ● proposal 3Com Router 5000 Family and Router 6000 Family Command Reference ■ security acl ■ tunnel local ■ tunnel remote
3Com Router 5000 Family and Router 6000 Family Command Reference radius nas-ip ● 225 radius nas-ip Purpose Use the radius nas-ip command to specify the source address of the RADIUS packet sent from NAS. Use the undo radius nas-ip command to restore the default setting.. Syntax radius nas-ip ip-address undo radius nas-ip Parameters ip-address Default By default, the source address is not specified, that is, the address of the interface sending the packet serves as the source address.
226 ● radius scheme 3Com Router 5000 Family and Router 6000 Family Command Reference radius scheme Purpose Use the radius scheme command to configure a RADIUS scheme and enter its view. Use the undo radius scheme command to delete the specified RADIUS scheme. Syntax radius scheme radius-scheme-name undo radius scheme radius-scheme-name Parameters radius-scheme-name Default By default, the RADIUS scheme named system exists in the system, with all attributes being the defaults.
3Com Router 5000 Family and Router 6000 Family Command Reference ■ scheme ■ server type ■ state ■ stop-accounting-buffer enable ■ timer realtime-accounting ■ user-name-format radius scheme ● 227
228 ● radius trap 3Com Router 5000 Family and Router 6000 Family Command Reference radius trap Purpose Use the radius trap command to enable the RADIUS server to send traps when it goes down. Use the undo radius trap command to disable the RADIUS server to send traps when it goes down.
3Com Router 5000 Family and Router 6000 Family Command Reference remote-address ● 229 remote-address Purpose Use the remote-address command to configure IP address of the remote GW. Use the undo remote-address command to delete IP address of the remote GW. Syntax remote-address ip-address1 [ ip-address2 ] undo remote-address Parameters ip-address Example Set IP address of the remote GW to 10.0.0.1. IP address, which can be the address of a network segment.
230 ● remote-name 3Com Router 5000 Family and Router 6000 Family Command Reference remote-name Purpose Use the remote-name command to specify a name for the remote GW. Use the undo remote-name command to remove the remote GW. Syntax remote-name name undo remote-name Parameters name Example Set the name of the remote GW to citya. Specifies a name for the peer in IKE negotiation, consisting of a string from 1 to 32 characters long.
3Com Router 5000 Family and Router 6000 Family Command Reference reset acl counter ● 231 reset acl counter Purpose Use the reset acl counter command to clear the statistics of access control list Syntax reset acl counter { all | acl-number } Parameters acl-number ACL expressed by number. all All ACL rules. Example Reset the statistics of access control list 1000.
3Com Router 5000 Family and Router 6000 Family Command Reference reset encrypt-card sa ● 233 reset encrypt-card sa Purpose Use the reset card. Syntax reset encrypt-card sa [ slot-id ] Parameters slot-id Example Clear the SAs on the encryption card on the slot 5/0/0. encrypt-card sa command to clear the SAs on the encryption Slot ID for the encryption card, whose range depends on the slot number on the router.
234 ● reset encrypt-card statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset encrypt-card statistics Purpose Use the reset encrypt-card statistics command to clear the statistics during processing of the encryption card. Syntax reset encrypt-card statistics [ slot-id ] Parameters slot-id Example Clear the processing statistics on the encryption card on the slot 5/0/0. Slot ID for the encryption card, whose range depends on the slot number on the router.
3Com Router 5000 Family and Router 6000 Family Command Reference reset encrypt-card syslog ● 235 reset encrypt-card syslog Purpose Use the reset encrypt-card syslog command to clear all the logging information on the encryption card. Syntax reset encrypt-card syslog [ slot-id ] Parameters slot-id Example Clear all the logging information on the encryption card on the slot 5/0/0. Slot ID for the encryption card, whose range depends on the slot number on the router.
236 ● reset firewall-statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset firewall-statistics Purpose Use the reset firewall-statistics command to clear the firewall statistics. Syntax reset firewall-statistics { all | interface type number } Parameters all Clears the filtering packet statistics of all the interfaces. interface Clears the filtering packet statistics of a certain interface. type number Specifies an interface by its type and number.
3Com Router 5000 Family and Router 6000 Family Command Reference reset hwatacs statistics ● 237 reset hwatacs statistics Purpose Use the reset hwtacacs statistics command to clear HWTACACS protocol statistics.reset hwtacacs statistics Syntax reset hwtacacs statistics { accounting | authentication | authorization | all } Parameters accounting Clears all the HWTACACS accounting statistics. authentication Clears all the HWTACACS authentication statistics.
238 ● reset ike sa 3Com Router 5000 Family and Router 6000 Family Command Reference reset ike sa Purpose Use the reset ike sa command to delete the security tunnel set up by IKE. Syntax reset ike sa [ connection-id ] Parameters connection-id Example Delete the security tunnel to 202.38.0.2. Specifies the SA to be deleted. If this parameter is not specified, all the SAs at phase 1 will be deleted. <3Com> display ike sa conn-id remote flag phase doi 1 202.38.0.2 RD|ST 1 IPSEC 2 202.38.0.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ipsec sa ● 239 reset ipsec sa Purpose Use the reset ipsec sa command to delete an SA already set up (manually or through IKE negotiation). If no parameter (remote, policy, parameters) is specified, all the SA will be deleted. Syntax reset ipsec sa [ remote ip-address | policy policy-name [ seq-number ] | parameters dest-addr protocol spi ] Parameters remote ip-address Specifies remote address, in dotted decimal format.
240 ● reset ipsec sa 3Com Router 5000 Family and Router 6000 Family Command Reference Delete an SA whose remote IP address is 10.1.1.2, security protocol is AH, and SPI is 10000. <3Com> reset ipsec sa parameters 10.1.1.2 ah 10000 View This command can be used in the following views: ■ Description User view An SA is uniquely identified by a triplet of IP address, security protocol and SPI. A SA can be set up either manually or through Internet Key Exchange (IKE) negotiation.
3Com Router 5000 Family and Router 6000 Family Command Reference reset ipsec statistics ● 241 reset ipsec statistics Purpose Use the reset ipsec statistics command to clear IPSec message statistics, and set all the statistics to zero. Syntax reset ipsec statistics Parameters None Example Clear IPSec message statistics.
242 ● reset portal 3Com Router 5000 Family and Router 6000 Family Command Reference reset portal Purpose Use the reset portal command to clear the related portal statistics. Syntax reset portal { acm | server | tcp-cheat } statistics Parameters acm Clears portal ACM statistics, that is, clear the state machine statistics related to authentication, connection, and management. server Clears portal server statistics. tcp-cheat Clears TCP spoofing statistics. Example Clear portal ACM statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset radius statistics ● 243 reset radius statistics Purpose Use the reset radius statistics command to clear the statistic information related to the RADIUS protocol. Syntax reset radius statistics Parameters None Example Clear the RADIUS protocol statistics.
244 ● reset stop-accounting-buffer 3Com Router 5000 Family and Router 6000 Family Command Reference reset stop-accounting-buffer Purpose Use the reset stop-accounting-buffer command to clear the stop-accounting requests that have no response and are buffered on the router.
3Com Router 5000 Family and Router 6000 Family Command Reference reset stop-accounting-buffer ● 245 reset stop-accounting-buffer Purpose Use the reset stop-accounting-buffer command to clear the buffered stop-accounting requests that have no responses.
246 ● reset stop-accounting-buffer Description 3Com Router 5000 Family and Router 6000 Family Command Reference If receiving no response after sending a stop-accounting request to a RADIUS server, the router buffers the request packet and retransmits it. The number of allowed transmission attempts can be set using the retry stop-accounting command. You can clear the buffered stop-accounting requests by RADIUS scheme, session ID, username, or time range.
3Com Router 5000 Family and Router 6000 Family Command Reference reset web java-blocking counter ● 247 reset web java-blocking counter Purpose Use the reset web java-blocking counter command to delete the statistics of Java blocking. Syntax reset web java-blocking counter Parameters None Example Delete the statistics of Java blocking.
248 ● reset web log-buf 3Com Router 5000 Family and Router 6000 Family Command Reference reset web log-buf Purpose Use the reset web log-buf command to delete the web filtering log buffer. Syntax reset web log-buf Parameters None Example Delete the web filtering log buffer.
3Com Router 5000 Family and Router 6000 Family Command Reference reset web url-filter host counter ● 249 reset web url-filter host counter Purpose Use the reset web url-filter host counter command to delete the statistics of the URL address filtering. Syntax reset web url-filter host counter Parameters None Example Delete the statistics of the URL address filtering. <3Com> reset web url-filter host counter Clear the counter of keywords in filter successfully.
250 ● reset web url-filter parameter counter 3Com Router 5000 Family and Router 6000 Family Command Reference reset web url-filter parameter counter Purpose Use the reset web url-filter parameter counter command to delete the statistics of SQL attack protection. Syntax reset web url-filter parameter counter Parameters None Example Delete the statistics of SQL attack protection. <3Com> reset web url-filter parameter counter Clear the counter of keywords in filter successfully.
3Com Router 5000 Family and Router 6000 Family Command Reference retry ● 251 retry Purpose Use the retry command to configure the number of RADIUS request attempts. Use the undo retry command to restore the default. Syntax retry retry-times undo retry Parameters retry-times Example With the RADIUS scheme "3Com", a RADIUS request can be sent up to five times. The maximum number of request attempts. Valid values are 1 to 20. If no value is specified, the default is 3.
252 ● retry realtime-accounting 3Com Router 5000 Family and Router 6000 Family Command Reference retry realtime-accounting Purpose Use the retry realtime-accounting command to configure the maximum number of real-time accounting request attempts allowed to have no responses. Use the undo retry realtime-accounting command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference retry stop-accounting ● 253 retry stop-accounting Purpose Use the retry stop-accounting command to configure the maximal retransmission times after stop-accounting request. Use the undo retry stop-accounting command to restore the retransmission times to the default value.
254 ● retry stop-accounting 3Com Router 5000 Family and Router 6000 Family Command Reference retry stop-accounting Purpose Use the retry stop-accounting command to enable stop-accounting packet retransmission and configure the maximum number of stop-accounting request attempts. Use the undo retry stop-accounting command to restore the default setting.
3Com Router 5000 Family and Router 6000 Family Command Reference root-certificate fingerprint ● 255 root-certificate fingerprint Purpose Use the root-certificate fingerprint command to configure the fingerprint for authenticating the CA root certificate. Use the undo root-certificate fingerprint command to delete the fingerprint for authenticating the CA root certificate.
256 ● rule 3Com Router 5000 Family and Router 6000 Family Command Reference rule Purpose Use the rule command to add a rule in current ACL view. Use the undo rule command to delete a rule. Syntax 1)Create or delete a rule of a basic access control list.
3Com Router 5000 Family and Router 6000 Family Command Reference rule ● 257 permit Permits matched packets. comment text Specifies a comment for each rule. protocol Protocol type over IP expressed by name or number. The number range is from 0 to 255, and the name range covers gre, icmp, igmp, ip, ipinip, ospf, tcp and udp. source Optional, specify source address information of ACL rule. If it is not configured, it indicates that any source address of the packets matches.
258 ● rule 3Com Router 5000 Family and Router 6000 Family Command Reference to), neq (not equal to) and range (between). If the operator is range, two port numbers should follow it. Others only need one port number. port1, port2 Optional, port number of TCP or UDP, expressed by name or number. The number range is from 0 to 65535. dscp dscp Specifies a DSCP field, the DS byte in IP packets.
3Com Router 5000 Family and Router 6000 Family Command Reference rule ● 259 destination Optional. Only the information setting related to the destination address part of the ACL rule number will be deleted. source-port Optional. Only the information setting related to the source port part of the ACL rule number will be deleted, valid only when the protocol is TCP or UDP. destination-port Optional.
260 ● rule 3Com Router 5000 Family and Router 6000 Family Command Reference dest-mask Example Destination MAC address mask. Create ACL 3001 and add a rule to deny RIP packets. [3Com] acl number 3001 [3Com-acl-adv-3001] rule deny udp destination-port eq rip Add a rule to permit hosts in the network segment 129.9.0.0 to send WWW packet to hosts in the network segment 202.38.160.0. [3Com-acl-adv-3001] rule permit tcp source 129.9.0.0 0.0.255.255 destination 202.38.160.0 0.0.0.
3Com Router 5000 Family and Router 6000 Family Command Reference sa authentication-hex ● 261 sa authentication-hex Purpose Use the sa authentication-hex command to set the SA authentication key manually for the ipsec policy of manual mode. Use the undo sa authentication-hex command to delete the SA authentication key already set.
262 ● sa authentication-hex View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description Manually-Established IPSec Policy view This command is only used for the ipsec policy in manual mode. For the ipsec policy in isakmp mode, it is unnecessary to set the SA parameter manually. IKE will automatically negotiate the SA parameter and establish a SA.
3Com Router 5000 Family and Router 6000 Family Command Reference sa duration ● 263 sa duration Purpose Use the sa duration command to set a SA duration of the ipsec policy. Use the undo sa duration command to cancel the SA duration, i.e., restore the use of the global SA duration. Syntax sa duration { traffic-based kilobytes | time-based seconds } undo sa duration { traffic-based | time-based } Parameters Example time-based seconds Time-based SA duration (in seconds).
264 ● sa duration 3Com Router 5000 Family and Router 6000 Family Command Reference expires first, the SA will get invalid. Before the SA is about to get invalid, IKE will set up a new SA for IPSec negotiation. So, a new SA is ready before the existing one gets invalid. The SA duration does not function for an SA manually set up, that is, the SA manually set up will never be invalidated.
3Com Router 5000 Family and Router 6000 Family Command Reference sa duration ● 265 sa duration Purpose Use the sa duration command to specify the ISAKMP Sa duration for an IKE proposal. Use the undo sa duration command to restore it to the default. Syntax sa duration seconds undo sa duration Parameters seconds Default By default, the value of ISAKMP Sa duration is 86400 seconds (one day). Example Specify the ISAKMP Sa duration for IKE proposal 10 as 600 seconds (10 minutes).
266 ● sa encryption-hex 3Com Router 5000 Family and Router 6000 Family Command Reference sa encryption-hex Purpose Use the sa encryption-hex command to set the SA encryption key manually for the ipsec policy of manual mode. Use the undo sa encryption-hex command to delete the SA parameter already set. Syntax sa encryption-hex { inbound | outbound } esp hex-key undo sa encryption-hex { inbound | outbound } esp Parameters Example inbound Sets the encryption-hex parameter for the inbound SA.
3Com Router 5000 Family and Router 6000 Family Command Reference Description sa encryption-hex ● 267 This command is only used for the ipsec policy in manual mode. It is used to set the SA parameter manually and establish a SA manually. For the ipsec policy in isakmp mode, it is unnecessary to set the SA parameter manually, and this command is invalid. IKE will automatically negotiate the SA parameter and establish a SA.
268 ● sa spi 3Com Router 5000 Family and Router 6000 Family Command Reference sa spi Purpose Use the sa spi command to set the SA SPI manually for the ipsec policy of manual mode. Use the undo sa spi command to delete the SA SPI already set. Syntax sa spi { inbound | outbound } { ah | esp } spi-number undo sa spi { inbound | outbound } { ah | esp } Parameters Example inbound Sets the spi parameter for the inbound SA.
3Com Router 5000 Family and Router 6000 Family Command Reference Description sa spi ● 269 This command is only used for the ipsec policy in manual mode. It is used to set the SA parameter manually and establish a SA manually. For the ipsec policy in isakmp mode, it is unnecessary to set the SA parameter manually, and this command is invalid. IKE will automatically negotiate the SA parameter and establish a SA.
270 ● sa string-key 3Com Router 5000 Family and Router 6000 Family Command Reference sa string-key Purpose Use the sa string-key command to set the SA parameter manually for the ipsec policy of manual mode. Use the undo sa string-key command to delete the SA parameter already set. Syntax sa string-key { inbound | outbound } { ah | esp } string-key undo sa string-key { inbound | outbound } { ah | esp } Parameters Example inbound Sets the string-key parameter for the inbound SA.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description sa string-key ● 271 Manually-Established IPSec Policy view This command is only used for the ipsec policy in manual mode. It is used to set the SA parameter manually and establish a SA manually. For the ipsec policy in isakmp mode, it is unnecessary to set the SA parameter manually, and this command is invalid.
272 ● scheme 3Com Router 5000 Family and Router 6000 Family Command Reference scheme Purpose Use the scheme command to configure the AAA scheme to be referenced by the current ISP domain. Use the undo scheme command to restore the default AAA scheme Syntax.
3Com Router 5000 Family and Router 6000 Family Command Reference scheme ● 273 available. If the RADIUS or TACACS server is available, local authentication is not used. If the local or none scheme applies as the first scheme, no RADIUS or HWTACACS scheme can be adopted.
274 ● secondary accounting 3Com Router 5000 Family and Router 6000 Family Command Reference secondary accounting Purpose Use the secondary accounting command to configure the IP address and port number for the secondary RADIUS accounting server. Use the undo secondary accounting command to restore the IP address and port number to the defaults. Syntax secondary accounting ip-address [ port-number ] undo secondary accounting Parameters Example ip-address IP address, in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference secondary accounting ● 275 secondary accounting Purpose Use the secondary accounting command to configure a secondary TACACS accounting server. Use the undo secondary accounting command to delete the configured secondary Syntax secondary accounting ip-address [ port ] undo secondary accounting Parameters ip-address IP address of the server, a valid unicast address in dotted decimal format. port Port number of the server.
276 ● secondary authentication 3Com Router 5000 Family and Router 6000 Family Command Reference secondary authentication Purpose Use the secondary authentication command to configure the IP address and port number of the secondary RADIUS authentication/authorization/accounting server. Use the undo secondary authentication command to restore the IP address and port number to the defaults.
3Com Router 5000 Family and Router 6000 Family Command Reference secondary authentication ● 277 secondary authentication Purpose Use the secondary authentication command to configure a secondary TACACS authentication server. Use the undo secondary authentication command to delete the configured secondary authentication server.
278 ● secondary authorization 3Com Router 5000 Family and Router 6000 Family Command Reference secondary authorization Purpose Use the secondary authorization command to configure a secondary TACACS authorization server. Use the .undo secondary authorization command to delete the configured secondary authorization server. Syntax secondary authorization ip-address [ port ] undo secondary authorization Parameters ip-address IP address of the server, a legal unicast address in dotted decimal format.
3Com Router 5000 Family and Router 6000 Family Command Reference security acl ● 279 security acl Purpose Use the security acl command to set an access control list to be used by the ipsec policy and specify the data stream protection mode. Use the undo security acl command to remove the access control list used by the ipsec policy.
280 ● security acl 3Com Router 5000 Family and Router 6000 Family Command Reference ■ Per-session mode: Specifies the ACL that a packet matches, and then establishes a tunnel to protect the packets that share the same source and destination addresses with this packet. Multiple tunnels are to be established in per-session mode to protect the specified ACL rule, because packets with different source and destination addresses probably match one ACL rule.
3Com Router 5000 Family and Router 6000 Family Command Reference security-policy-server ● 281 security-policy-server Purpose Use the security-policy-server command to specify the IP address of a security policy server. Use the undo security-policy-server command to delete the specified or all security policy servers.
282 ● server type 3Com Router 5000 Family and Router 6000 Family Command Reference server type Purpose Use the server-type command to configure the RADIUS server type supported by the router. Syntax server-type { 3Com | standard | portal } Parameters 3Com Specifies the RADIUS server of 3Com type (generally CAMS), which requires the RADIUS client (router system) and RADIUS server to interact according to the procedures and packet format provisioned by the private RADIUS protocol of 3Com Corporation.
3Com Router 5000 Family and Router 6000 Family Command Reference service type ● 283 service type Purpose Use the service-type command to configure a service type for a particular user. Use the undo service-type command to delete one or all service types configured for the user. Syntax service-type { dvpn | telnet | ssh | terminal | pad } undo service-type { dvpn | telnet | ssh | terminal | pad } Parameters dvpn Authorizes the user to use the DVPN service.
3Com Router 5000 Family and Router 6000 Family Command Reference service-type ftp ● 285 service-type ftp Purpose Use the service-type ftp command to specify a directory accessible for the FTP user. Use the undo service-type ftp command to disable FTP service. Use the undo service-type ftp ftp-directory command to restore the default directory accessible for the FTP user.
286 ● snmp-agent trap enable encrypt-card 3Com Router 5000 Family and Router 6000 Family Command Reference snmp-agent trap enable encrypt-card Purpose Use the snmp-agent trap enable encrypt-card command to enable SNMP agent trap function on the encryption card. Use the undo snmp-agent trap enable encrypt-card command to disable SNMP agent trap function on the card.
3Com Router 5000 Family and Router 6000 Family Command Reference state ● 287 state Purpose Use the state command to clarify the name of the state where an entity lies. Use the undo state command to cancel the previous operation. Syntax state state-str undo state Parameters state-str Default By default, the state of an entity is not specified. Example Specify the state where an entity lies State name, consisting of a string from 1 to 31 characters long.
288 ● state 3Com Router 5000 Family and Router 6000 Family Command Reference state Purpose Use the state command to configure the state of a RADIUS server. Syntax state { primary | secondary } { accounting | authentication } { block | active } Parameters primary Sets the state of the primary RADIUS server. secondary Sets the state of the secondary RADIUS server. accounting Sets the state of RADIUS accounting server. authentication Sets the state of RADIUS authentication/authorization server.
3Com Router 5000 Family and Router 6000 Family Command Reference ■ secondary accounting ■ secondary authentication state ● 289
290 ● state 3Com Router 5000 Family and Router 6000 Family Command Reference state Purpose Use the state command to configure the state of the current ISP domain or local user. Syntax state { active | block } Parameters active Configured to allow users in the current ISP domain or the current local user to request for network services. block Configured to block users in the current ISP domain or the current local user to request for network services.
3Com Router 5000 Family and Router 6000 Family Command Reference stop-accounting-buffer enable ● 291 stop-accounting-buffer enable Purpose Use the stop-accounting-buffer enable command to enable the router to buffer the stop-accounting requests that have no responses. Use the undo stop-accounting-buffer enable command to disable the router to buffer the stop-accounting requests that have no responses.
292 ● time-out 3Com Router 5000 Family and Router 6000 Family Command Reference time-out Purpose Use the time-out command to configure the time waiting for a DPD acknowledgement. Use the undo time-out command to restore the default. Syntax time-out seconds undo time-out Parameters seconds Example Set time-out to two seconds. Time waiting for a DPD acknowledgement (in seconds). Valid values are 1 to 60. If no value is specified, the default is 5 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference time-range ● 293 time-range Purpose Use the time-range command to specify a time range. Use the undo time-range command to delete a time range.
294 ● time-range 3Com Router 5000 Family and Router 6000 Family Command Reference [3Com] time test 14:00 to 16:00 off-day from 20:00 04/01/2003 to 20:00 12/10/2003 Configure the time range valid between 8:00 and 18:00 in each working day. [3Com] time-range test 8:00 to 18:00 working-day Configure the time range valid between 14:00 and 18:00 in each weekend day.
3Com Router 5000 Family and Router 6000 Family Command Reference timer quiet ● 295 timer quiet Purpose Use the timer quiet command to set the duration that a primary server must wait before it can resume the active state. Use the undo timer quiet command to restore the default (five minutes). Syntax timer quiet minutes undo timer quiet Parameters minutes Example Set the quiet timer for the primary server to ten minutes.
296 ● timer quiet 3Com Router 5000 Family and Router 6000 Family Command Reference timer quiet Purpose Use the timer quiet command to set the duration that the primary server must wait before it can resume the active state. Use the undo timer quiet command to restore the default (five minutes). Syntax timer quiet minutes undo timer quiet Parameters minutes Example Set the quiet timer for the primary server to ten minutes.
3Com Router 5000 Family and Router 6000 Family Command Reference timer realtime-accounting ● 297 timer realtime-accounting Purpose Use the timer realtime-accounting command to configure a real-time accounting interval. Use the undo timer realtime-accounting command to restore the default interval. Syntax timer realtime-accounting minutes undo timer realtime-accounting Parameters minutes Example Set the real-time accounting interval in the HWTACACS scheme “3Com” to 51 minutes.
298 ● timer realtime-accounting 3Com Router 5000 Family and Router 6000 Family Command Reference timer realtime-accounting Purpose tUse the timer realtime-accounting command to configure a real-time accounting interval. Use the undo timer realtime-accounting command to restore the default interval. Syntax timer realtime-accounting minutes undo timer realtime-accounting Parameters minutes Example Set the real-time accounting interval in the RADIUS scheme “3Com” to 51 minutes.
3Com Router 5000 Family and Router 6000 Family Command Reference timer response-timeout ● 299 timer response-timeout Purpose Use the timer response-timeout command to configure the RADIUS server response timer. Use the undo timer response-timeout command to restore the default. Syntax timer response-timeout seconds undo timer response-timeout Parameters seconds Example Set the response timeout timer in the RADIUS scheme 3Com to 5 seconds. RADIUS server response timeout timer.
300 ● timer response-timeout 3Com Router 5000 Family and Router 6000 Family Command Reference timer response-timeout Purpose Use the timer response-timeout command to set the response timeout timer of the TACACS server. Use the undo timer response-timeout command to restore the default (five seconds). Syntax timer response-timeout seconds undo timer response-timeout Parameters seconds Example Set the response timeout time of the TACACS server to 30 seconds. Valid values are 1 to 300 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference transform ● 301 transform Purpose Use the transform command to set a security protocol used by a proposal. Use the undo transform command to restore the default security protocol. Syntax transform { ah | ah-esp | esp } undo transform Parameters ah Uses AH protocol specified in RFC2402. ah-esp Uses ESP specified in RFC2406 to protect the packets and then uses AH protocol specified in RFC2402 to authenticate packets.
302 ● transform 3Com Router 5000 Family and Router 6000 Family Command Reference The following figure illustrates the data encapsulation formats of different security protocols in the transport mode and the tunnel mode. The data in this figure is the original IP datagram.
3Com Router 5000 Family and Router 6000 Family Command Reference tunnel local ● 303 tunnel local Purpose Use the tunnel local command to set the local address of an ipsec policy. Use the undo tunnel local command to delete the local address set in the ipsec policy. Syntax tunnel local ip-address undo tunnel local Parameters ip-address Default By default, the local address of an ipsec policy is not configured.
304 ● tunnel remote 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel remote Purpose Use the tunnel remote command to set the remote address of an ipsec policy. Use the undo tunnel remote command to delete the remote address in the ipsec policy. Syntax tunnel remote ip-address undo tunnel remote [ ip-address ] Parameters ip-address Default By default, the remote address of an ipsec policy is not configured. Example Set the remote address of the ipsec policy to 10.1.1.2.
3Com Router 5000 Family and Router 6000 Family Command Reference use encrypt-card ● 305 use encrypt-card Purpose Use the use encrypt-card command to specify the SA proposal uses the encryption card at a designated slot. Use the undo use encrypt-card command to remove the configuration. Syntax use encrypt-card [ slot-id ] undo use encrypt-card [ slot-id ] Parameters slot-id Example Configure the slot holding the encryption card used by the encryption card SA proposal named card.
306 ● user-name-format 3Com Router 5000 Family and Router 6000 Family Command Reference user-name-format Purpose Use the user-name-format command to configure the username format sent to the TACACS server. Syntax user-name-format { with-domain | without-domain } Parameters with-domain Specifies to send the username with domain name to the TACACS server. without-domain Specifies to send the username without domain name to the TACACS server.
3Com Router 5000 Family and Router 6000 Family Command Reference user-name-format ● 307 user-name-format Purpose Use the user-name-format command to configure the format of the username to be sent to a RADIUS server. Syntax user-name-format { with-domain | without-domain } Parameters with-domain Includes the ISP domain name in the username sent to the RADIUS server. without-domain Excludes the ISP domain name from the username sent to the RADIUS server.
308 ● web java-blocking acl-number 3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking acl-number Purpose Use the web java-blocking acl-number command to enable Java blocking ACL function. Use the undo web java-blocking acl-number command to disable the function. Syntax web java-blocking acl-number acl-number undo web java-blocking acl-number Parameters acl-number Example Enable Java blocking ACL function. Basic ACL number. Valid values are 2000 to 2999.
3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking enable ● 309 web java-blocking enable Purpose Use the web java-blocking enable command to enable Java blocking. Use the undo web java-blocking enable command to disable the function. Syntax web java-blocking enable undo web java-blocking enable Parameters None Example Enable Java blocking.
310 ● web java-blocking extension add 3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking extension add Purpose Use the web java-blocking extension add command to add the extension name of the Java request packet to be blocked. Syntax web java-blocking extension add keywords Parameters keywords Example Add the Java request packet with the extension name .class to be filter item. Extension name of the Java request packet to be blocked. The keyword must begin with ”.
312 ● web java-blocking extension delete 3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking extension delete Purpose Use the web java-blocking extension delete command to delete the added extension name of the Java request packet. Syntax web java-blocking extension delete keywords Parameters keywords Example Delete the Java request packet with the extension name .class to be filter item. The extension name of the Java request packet to be deleted.
3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking extension delete-all ● 313 web java-blocking extension delete-all Purpose Use the web java-blocking extension delete-all command to delete all blocking keywords previously added. Syntax web java-blocking extension delete-all Parameters None Example Delete all blocking keywords previously added.
314 ● web java-blocking extension load-file 3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking extension load-file Purpose Use the web java-blocking extension load-file command to load the Java blocking filtering file. Use the undo web java-blocking extension load-file command to unload the file.
3Com Router 5000 Family and Router 6000 Family Command Reference web java-blocking extension save-file ● 315 web java-blocking extension save-file Purpose Use the web java-blocking extension save-file command save Java blocking filtering file. Syntax web java-blocking extension save-file file-name Parameters file-name Example Save the Java blocking filtering file named javablk. Saves the name of the file for URL address filtering.
316 ● web log enable 3Com Router 5000 Family and Router 6000 Family Command Reference web log enable Purpose Use the web log enable command to enable the log function and create a log timer. Use the undo web log enable command to disable the function and delete the log timer. Syntax web log enable undo web log enable Parameters None Default By default, the function is disabled. Example Enable the log function.
3Com Router 5000 Family and Router 6000 Family Command Reference web log timer ● 317 web log timer Purpose Use the web log timer command to configure timeout time of the log timer. Use the undo web log timer command to restore the timeout time to default value. Syntax web log timer time undo web log timer Parameters time Default By default, the timeout time is 30 seconds. Example Configure the timeout time of the log timer to be 45 seconds. Timeout time of the log timer (in seconds).
318 ● web url-filter host acl-number 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host acl-number Purpose Use the web url-filter host acl-number command to configure that the firewall uses ACL to filter the web requests whose destination URL address is an IP address. The command is effective only after the function of URL address filtering support for IP address is enabled.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host add ● 319 web url-filter host add Purpose Use the web url-filter host add command to add web filtering address, and set the filtering operation. Syntax web url-filter host add { permit | deny } url-address [ priority priority-number ] Parameters permit The operation is permit. deny The operation is deny. url-address URL filtering address being added. It supports the wildcards ^, $, &, and *.
320 ● web url-filter host add Example 3Com Router 5000 Family and Router 6000 Family Command Reference Add the filtering items that allow the address www.huawei-3com.com to pass. <3Com> system-view [3Com] web url-filter host add permit www.huawei-3com.com Add host name successfully.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host default ● 321 web url-filter host default Purpose Use the web url-filter host default command to permit or deny the packets that do not match with the addresses configured by the administrator. Syntax web url-filter host default { permit | deny } Parameters permit The default filtering operation is permit. deny The default filtering operation is deny. Default By default, the unmatched packet is permitted.
322 ● web url-filter host delete 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host delete Purpose Use the web url-filter host delete command to delete the web filtering items previously added. Syntax web url-filter host delete url-address Parameters url-address Example Delete the filtering item with the address www.huawei-3com.com. The filtering address to be deleted. <3Com> system-view [3Com] web url-filter host delete www.huawei-3com.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host delete-all ● 323 web url-filter host delete-all Purpose Use the web url-filter host delete-all command to delete all filtering address items. Syntax web url-filter host delete-all Parameters None Example Delete all filtering address items. <3Com> system-view [3Com] web url-filter host delete-all Delete all host names in filter successfully.
324 ● web url-filter host enable 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host enable Purpose Use the web url-filter host enable command to enable URL address filtering. Use the undo web url-filter host enable command to disable the function. Syntax web url-filter host enable undo web url-filter host enable Parameters None Default By default, the function is disabled. Example Enable URL address filtering.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host ip-address ● 325 web url-filter host ip-address Purpose Use the web url-filter host ip-address command to configure whether to permit the web request whose destination URL address is an IP address to pass. Syntax web url-filter host ip-address { permit | deny } Parameters permit Permits the web request whose destination URL address is an IP address.
326 ● web url-filter host load-file 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host load-file Purpose Use the web url-filter host load-file command to load the URL address filtering file. Use the undo web url-filter host load-file command to unload the file. Syntax web url-filter host load-file file-name undo web url-filter host load-file Parameters file-name Example Load the URL address filtering file named urlfilter. Name of the loaded filtering file.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter host save-file ● 327 web url-filter host save-file Purpose Use the web url-filter host save-file command to save the URL address filtering file. Syntax web url-filter host save-file file-name Parameters file-name Example Save the URL address filtering file named urlfilter. Name of the saved filtering file.
328 ● web url-filter parameter add 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter add Purpose Use the web url-filter parameter add command to add keywords for the URL parameter filtering. The keywords support the wildcards ^, $, & and *. For the description of the wildcards, see Table 5-1.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter add-default ● 329 web url-filter parameter add-default Purpose Use the web url-filter parameter add-default command to add the default filter keywords ^select^, ^insert^, ^update^, ^delete^, ^drop^, --, ’, ^exec^ and %27 to facilitate input of the user, prevent from careless deletion of some keywords, or enable to restore the default configuration quickly when this command is improperly executed.
330 ● web url-filter parameter delete 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter delete Purpose Use the web url-filter parameter delete command to delete a filter keyword previously added. Syntax web url-filter parameter delete keywords Parameters keywords Example Delete the filter keyword select. The filter keywords to be deleted. <3Com> system-view [3Com] web url-filter parameter delete select Delete key word successfully.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter delete-all ● 331 web url-filter parameter delete-all Purpose Use the web url-filter parameter delete-all command to delete all filter keywords. Syntax web url-filter parameter delete-all Parameters None Example Delete all filter keywords. <3Com> system-view [3Com] web url-filter parameter delete-all Delete all key words in filter successfully.
332 ● web url-filter parameter enable 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter enable Purpose Use the web url-filter parameter enable command to enable URL parameter filtering. Use the undo web url-filter parameter enable command to disable the function. Syntax web url-filter parameter enable undo web url-filter parameter enable Parameters None Default By default, the function is disabled. Example Enable SQL attack protection.
3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter load-file ● 333 web url-filter parameter load-file Purpose Use the web url-filter parameter load-file command to load the URL parameter filtering file. Use the undo web url-filter parameter load-file command to unload the file. Syntax web url-filter parameter load-file file-name undo web url-filter parameter load-file Parameters file-name Example Load the URL parameter filtering file named sqlfilter.
334 ● web url-filter parameter save-file 3Com Router 5000 Family and Router 6000 Family Command Reference web url-filter parameter save-file Purpose Use the web url-filter parameter save-file command to save the URL parameter filtering file. Syntax web url-filter parameter save-file file-name Parameters file-name Example Save the URL parameter filtering file named sqlfilter. Name of the saved filtering file.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 VPN ALPHABETICAL LISTING OF COMMANDS algorithm-suite 3 allow l2tp 4 authentication-client method 6 authentication-server method 7 data algorithm-suite 8 data ipsec-sa duration time-base 9 debugging dvpn 10 debugging l2tp 11 debugging tunnel 12 destination 13 display dvpn info 14 display dvpn ipsec-sa 16 display dvpn map 17 display dvpn online-user 18 display dvpn session 19 display interface tunnel 20 display l2tp session 22 display l2tp
2● 3Com Router 5000 Family and Router 6000 Family Command Reference mandatory-chap 49 mandatory-lcp 50 mtu (Tunnel interface) 51 pre-shared-key 52 private-ip 53 public-ip 54 reset dvpn all 55 reset dvpn map 56 reset dvpn session 57 reset dvpn statistics 58 reset l2tp session 59 reset l2tp tunnel 60 reset l2tp user 61 session algorithm-suite 62 session idle-time 63 session idle-timeout 64 session keepalive-interval 65 session setup-interval 66 source 67 start l2tp 69 start l2tp tunnel 71 l2tp-auto-client e
3Com Router 5000 Family and Router 6000 Family Command Reference algorithm-suite ● 3 algorithm-suite Purpose Use the algorithm-suite command to specify the algorithm suite used when a client registers. Use the undo algorithm-suite command to revert to the default algorithm suite. Syntax algorithm-suite suite-number undo algorithm-suite Parameters suite-number Algorithm suite number.
4 ● allow l2tp 3Com Router 5000 Family and Router 6000 Family Command Reference allow l2tp Purpose Use the allow l2tp command to specify the name of the peer end of the tunnel on receiving call and the Virtual-Template it uses. Use the undo allow command to remove the name of the peer end of the tunnel and the adopted virtual template.
3Com Router 5000 Family and Router 6000 Family Command Reference allow l2tp ● 5 When L2TP group number1 (the default L2TP group number) is used, the name of the peer end of the tunnel remote-name can be unspecified.
6 ● authentication-client method 3Com Router 5000 Family and Router 6000 Family Command Reference authentication-client method Purpose Use the authentication-client method command to specify how the DVPN server that applies the DVPN policy authenticates clients. None, CHAP, and PAP are currently available. Syntax authentication-client method { chap | none | pap } Parameters pap Specifies the DVPN server to authenticate clients using PAP (password authentication protocol).
3Com Router 5000 Family and Router 6000 Family Command Reference authentication-server method ● 7 authentication-server method Purpose Use the authentication-server method command to specify a client whether or not to authenticates the DVPN server it accesses. Syntax authentication-server method { none | pre-share } Parameters none Specifies the client not to authenticate the DVPN server. pre-share Specifies the client to authenticate the DVPN server using a pre-shared key.
8 ● data algorithm-suite 3Com Router 5000 Family and Router 6000 Family Command Reference data algorithm-suite Purpose Use the data algorithm-suite command to specify the algorithm suite used by IPSec SA (security association) to forward data. Use the undo data algorithm-suite command to revert to the default algorithm suite.
3Com Router 5000 Family and Router 6000 Family Command Reference data ipsec-sa duration time-base ● 9 data ipsec-sa duration time-base Purpose Use the data ipsec-sa duration time-base command to set the lifetime of the IPSec SA used to encrypt DVPN data. Use the undo data ipsec-sa duration time-base command to restore the default lifetime of the IPSec SA.
10 ● debugging dvpn 3Com Router 5000 Family and Router 6000 Family Command Reference debugging dvpn Purpose Use the debugging dvpn command to enable DVPN debugging. Use the undo debugging dvpn command to disable DVPN debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging l2tp ● 11 debugging l2tp Purpose Use the debugging l2tp command to enable L2TP debugging. Use the undo debugging l2tp command to disable L2TP debugging. Syntax debugging l2tp { all | control | dump | error | event | hidden | payload | time-stamp } undo debugging l2tp { all | control | error | event | hidden | payload | time-stamp } Parameters Example all Enables all L2TP debugging. control Enables control packet debugging.
12 ● debugging tunnel 3Com Router 5000 Family and Router 6000 Family Command Reference debugging tunnel Purpose Use the debugging tunnel command to enable tunnel debugging. Use the undo debugging tunnel command to disable tunnel debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference destination ● 13 destination Purpose Use the destination command to specify the destination IP address to be filled in the added IP header at the time of tunnel interface encapsulation. Use the undo destination command to delete the defined destination address. Syntax destination ip-addr undo destination Parameters ip-addr Default By default, destination address of tunnel is not specified in the system.
14 ● display dvpn info 3Com Router 5000 Family and Router 6000 Family Command Reference display dvpn info Purpose Use the display dvpn info command to display the configuration and operating information about a specified DVPN. Use the display dvpn info global command to display the global configuration and operating information about the current DVPN. Syntax display dvpn info { dvpn-id dvpn-id | global } Parameters dvpn-id ID number of the DVPN domain. Valid values are 1 to 65,535.
3Com Router 5000 Family and Router 6000 Family Command Reference DVPN Service Globle infomation: Total dvpn number Total Server Dvpn number Total Client Dvpn number Total Dvpn Class number Total Dvpn Policy number Global Authenticate Client Type Global map agetime Global register interval Global register retry Global regoster dumb Total Map number Total Session number Total redirect number Total UDP input packets Total input drop packets Total output packets Total write to ipsec err Total output error View
16 ● display dvpn ipsec-sa 3Com Router 5000 Family and Router 6000 Family Command Reference display dvpn ipsec-sa Purpose Use the display dvpn ipsec-sa command to display the specified IPSec SA information. Syntax display dvpn ipsec-sa { all | dvpn-id dvpn-id [ private-ip private-ip ] } Parameters all Specifies all the information about IPSec SA. dvpn-id ID number of the DVPN domain. Valid values are 1 to 65,535. private-ip Specifies the private IP address.
3Com Router 5000 Family and Router 6000 Family Command Reference display dvpn map ● 17 display dvpn map Purpose Use the display dvpn map command to display information about maps in a DVPN domain, such as private IP address, public IP address, port number, DVPN connection state, DVPN connection type, and control ID. Syntax display dvpn map { all | dvpn-id dvpn-id | public-ip public-ip } Parameters all Displays all the established map information. dvpn-id dvpn-id ID number of the DVPN domain.
18 ● display dvpn online-user 3Com Router 5000 Family and Router 6000 Family Command Reference display dvpn online-user Purpose Use the display dvpn online-user command to display the information about online DVPN users. Syntax display dvpn online-user Parameters None Example Display the information about online DVPN users.
3Com Router 5000 Family and Router 6000 Family Command Reference display dvpn session ● 19 display dvpn session Purpose Use the display dvpn session command to display information about sessions the device owns. Syntax display dvpn session { all | dvpn-id dvpn-id } Parameters all Displays all the established session information. dvpn-id dvpn-id ID of the DVPN domain. Valid values are 1 to 65,535. private-ip private-IP Specifies the private IP address (the IP address of the tunnel interface).
20 ● display interface tunnel 3Com Router 5000 Family and Router 6000 Family Command Reference display interface tunnel Purpose Use the display interface tunnel command to view the working status of tunnel interface. Syntax display interface tunnel [number ] Parameters number Example Display the current tunnel interface. Tunnel interface ID.
3Com Router 5000 Family and Router 6000 Family Command Reference display interface tunnel ● 21 Table 1 Description on the fields of the display interface tunnel 2 command (continued) View Field Description packets/sec Input packet number in seconds within the last 5 minutes packets input Total input packet number bytes Total input byte number input error Number of error packets among all input packets. output error Number of error packets among all output packets.
22 ● display l2tp session 3Com Router 5000 Family and Router 6000 Family Command Reference display l2tp session Purpose Use the display l2tp session command to view the current L2TP sessions. Syntax display l2tp session Parameters None Example Display current L2TP sessions.
3Com Switch 5500 Family Command Reference display l2tp session ● 23 display l2tp session Purpose Use the display l2tp session command to view the current L2TP sessions. Syntax display l2tp session Parameters None Example Display current L2TP sessions.
24 ● display l2tp tunnel 3Com Router 5000 Family and Router 6000 Family Command Reference display l2tp tunnel Purpose Use the display l2tp tunnel command to view information of the current L2TP tunnels. Syntax display l2tp tunnel Parameters None Example Display information of the current L2TP tunnels. <3Com> display l2tp tunnel LocalTID RemoteTID RemoteAddress Port Sessions RemoteName keepstand 2 22849 11.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display l2tp tunnel ● 25 display l2tp tunnel Purpose Use the display l2tp tunnel command to view information of the current L2TP tunnels. Syntax display l2tp tunnel Parameters None Example Display information of the current L2TP tunnels. <3Com> display l2tp tunnel LocalTID RemoteTID RemoteAddress Port Sessions RemoteName keepstand 2 22849 11.1.1.
26 ● display l2tp user 3Com Router 5000 Family and Router 6000 Family Command Reference display l2tp user Purpose Use the display l2tp user command to view information about the current L2TP users. Syntax display l2tp user Parameters None Example Display information about the current L2TP users.
3Com Router 5000 Family and Router 6000 Family Command Reference display l2tp user ● 27 display l2tp user Purpose Use the display l2tp user command to view information about the current L2TP users. Syntax display l2tp user Parameters None Example Display information about the current L2TP users.
28 ● dvpn class 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn class Purpose Use the dvpn class command to create and enter a dvpn-class view. Use the undo dvpn class command to remove a dvpn-class view. Syntax dvpn class dvpn-class-name undo dvpn class Parameters dvpn-class-name Default No dvpn-class is configured by default. Example Create a DVPN class named abc. Name of the DVPN class to be created, consisting of a string with a maximum of 31 characters.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn client register-dumb ● 29 dvpn client register-dumb Purpose Use the dvpn client register-dumb command to set the time when a client turns to dumb state after it fails to register with a DVPN server for specified retries. Use the undo dvpn client register-dumb command to revert to the default dumb interval.
30 ● dvpn client register-interval 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn client register-interval Purpose Use the dvpn client register-interval command to set the register interval of a client. Use the undo dvpn client register-interval command to revert to the default register interval of the client. Syntax dvpn client register-interval time-interval undo dvpn client register-interval Parameters time-interval Default The default register interval is 10 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn client register-retry ● 31 dvpn client register-retry Purpose Use the dvpn client register-retry command to set the maximum retries for a client to register with a DVPN server continuously. Use the undo dvpn client register-retry command to revert to the default retries for a client to register with a DVPN server continuously.
32 ● dvpn dvpn-id 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn dvpn-id Purpose Use the dvpn dvpn-id command to specify the DVPN domain the tunnel interface belongs to. This command is valid when the tunnel interface is encapsulated as DVPN. Use the undo dvpn dvpn-id command to remove the DVPN domain ID assigned to the tunnel interface. Syntax dvpn dvpn-id dvpn-id undo dvpn dvpn-id Parameters dvpn-id Default No DVPN domain ID is assigned to a tunnel interface by default.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn interface-type ● 33 dvpn interface-type Purpose Use the dvpn interface-type command to specify the type of a tunnel interface. A tunnel interface is of client type by default. Syntax dvpn interface-type { client | server } Parameters client Specifies the tunnel interface to be of client type. server Specifies the tunnel interface to be of server type. Example Specify the tunnel interface to be of server type.
34 ● dvpn policy 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn policy Purpose Use the dvpn policy command to create and enter a DVPN policy view. Use the undo dvpn policy command to remove a DVPN policy view. Syntax dvpn policy dvpn-policy-name undo dvpn policy dvpn-policy-name Parameters dvpn-policy-name Default No DVPN policy is configured by default. Example Create a DVPN policy named abc.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn policy ● 35 dvpn policy Purpose Use the dvpn policy command to apply a specified DVPN policy to a tunnel interface that is of server type. Use the undo dvpn policy command to disable a DVPN policy applied to a tunnel interface. Syntax dvpn policy dvpn-policy-name undo dvpn policy dvpn-policy-name Parameters policy-class-name Default No DVPN policy is applied to the tunnel interface by default.
36 ● dvpn register-type 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn register-type Purpose Use the dvpn register-type command to configure the type of the additional information when a client registers with a DVPN server. Use the undo dvpn register-type command to revert to the default type.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn security ● 37 dvpn security Purpose Use the dvpn security acl command to configure the ACL used for deciding which data stream needs IPSec encryption on the tunnel interface. Use the undo dvpn security acl command to remove the ACL. Syntax dvpn security acl acl-number undo dvpn security acl Parameters acl-number Example On tunnel interface 0 encrypt data streams except for those denied by ACL 3100.
38 ● dvpn server 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn server Purpose Use the dvpn server command to configure the DVPN class to be applied to a tunnel interface. Use the undo dvpn server command to remove the DVPN class applied to a tunnel interface. Syntax dvpn server dvpn-class-name undo dvpn server dvpn-class-name Parameters dvpn-class-name Default A tunnel interface is not configured with a DVPN class by default.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn server authentication-client method ● 39 dvpn server authentication-client method Purpose Use the dvpn server authentication-client method command to specify the default way a DVPN server authenticates clients. Syntax dvpn server authentication-client method { chap | none | pap } Parameters none Specifies the DVPN server not to authenticate clients.
40 ● dvpn server map age-time 3Com Router 5000 Family and Router 6000 Family Command Reference dvpn server map age-time Purpose Use the dvpn server map age-time command to set the map age time of a DVPN server. Use the undo dvpn server map age-time command to revert to the default map age time. Syntax dvpn server map age-time time undo dvpn server map age-time Parameters time Example Set the map age time to 60 seconds. Map age time of a DVPN server.
3Com Router 5000 Family and Router 6000 Family Command Reference dvpn server pre-shared-key ● 41 dvpn server pre-shared-key Purpose Use the dvpn server pre-shared-key command to set a pre-shared key for a DVPN server. Use the undo dvpn server pre-shared-key command to remove the pre-shared key of a DVPN server. Syntax dvpn server pre-shared-key key undo dvpn server pre-shared-key Parameters key Default A DVPN server is not configured with a pre-shared key by default.
3Com Router 5000 Family and Router 6000 Family Command Reference gre checksum ● 43 gre checksum Purpose Use the gre checksum command to configure the two ends of a tunnel to perform end-to-end check, verifying the correctness of packets and discard those that do not pass the verification. Use the undo gre checksum command to cancel the check. Syntax gre checksum undo gre checksum Parameters None Default By default, end-to-end check of the two ends of tunnel is disabled.
44 ● gre key 3Com Router 5000 Family and Router 6000 Family Command Reference gre key Purpose Use the gre key command to set identification keyword of the tunnel interface, and by this feeble security mechanism avoid incorrectly identifying or receiving packets from undesired places. Use the undo gre key command to delete this configuration. Syntax gre key key-number undo gre key Parameters key-number Default By default, the system does not assign identification keyword to the tunnel in use.
3Com Router 5000 Family and Router 6000 Family Command Reference interface tunnel ● 45 interface tunnel Purpose Use the interface tunnel command to create a tunnel interface and enter the view of this tunnel interface. Use the undo interface tunnel command to delete the specified tunnel interface. Syntax interface tunnel number undo interface tunnel number Parameters number Default By default, there is no tunnel interface in the system. Example Create interface Tunnel 3. Tunnel interface number.
46 ● interface virtual-template 3Com Router 5000 Family and Router 6000 Family Command Reference interface virtual-template Purpose Use the interface virtual-template command to create a virtual template. Use the undo interface virtual-template command to delete the virtual template. Syntax interface virtual-template virtual-template-number undo interface virtual-template virtual-template-number Parameters virtual-template-number Default By default, no virtual template is created.
3Com Router 5000 Family and Router 6000 Family Command Reference keepalive ● 47 keepalive Purpose Use the keepalive command to enable the keepalive function of GRE and configure the interval for sending keepalive messages and the maximum number of sending attempts as well. Use the undo keepalive command to disable the keepalive function. Syntax keepalive [ seconds ] [ times ] undo keepalive Parameters seconds Internal for sending keepalive messages in seconds. Valid values are 1 to 32,767 seconds.
48 ● local-user 3Com Router 5000 Family and Router 6000 Family Command Reference local-user Purpose lUse the local-user command to configure the user name and password of a client. Use the undo local-user command to remove the existing user name and password. Syntax local-user username password { simple | cipher } password undo local-user username Parameters Example username User name of the client, consisting of a string from 1 byte to 80 bytes in length. password Password of the client.
3Com Router 5000 Family and Router 6000 Family Command Reference mandatory-chap ● 49 mandatory-chap Purpose Use the mandatory-chap command to force LNS to perform CHAP authentication again with the client. Use the undo mandatory-chap command to disable CHAP re-authentication. Syntax mandatory-chap undo mandatory-chap Parameters None Default By default, CHAP re-authentication is not performed. Example Perform mandatory CHAP authentication.
50 ● mandatory-lcp 3Com Router 5000 Family and Router 6000 Family Command Reference mandatory-lcp Purpose Use the mandatory-lcp command to allow LNS and client to renegotiate Link Control Protocol (LCP) between them. Use the undo mandatory-lcp command to disable LCP renegotiation. Syntax mandatory-lcp undo mandatory-lcp Parameters None Default By default, LCP is not renegotiated. Example Enable LCP renegotiation.
3Com Router 5000 Family and Router 6000 Family Command Reference mtu (Tunnel interface) ● 51 mtu (Tunnel interface) Purpose Use the mtu command to set the maximum transmission unit (MTU) for Tunnel interface. Use the undo mtu command to restore to the default value. Syntax mtu size undo mtu Parameters size Default By default, the MTU value for Tunnel interface is 15000. Example Set the MTU value for Tunnel interface to 64000. Specifies maximum transmission unit on Tunnel interface (in bytes).
52 ● pre-shared-key 3Com Router 5000 Family and Router 6000 Family Command Reference pre-shared-key Purpose Use the pre-shared-key command to set the pre-shared key used when a client needs to authenticate a DVPN server. Use the undo pre-shared-key command to remove the pre-shared key of the DVPN server configured on the client side. Syntax pre-shared-key key undo pre-shared-key Parameters key Example Set the pre-shared key of the DVPN server on a client side to 123.
3Com Router 5000 Family and Router 6000 Family Command Reference private-ip ● 53 private-ip Purpose Use the private-ip command to specify a private IP address of a specified DVPN server. Use the undo private-ip command to remove the private IP address of a specified DVPN server. Syntax private-ip ip-address undo private-ip Parameters ip-address Default No private IP address of the DVPN server is specified by default. Example Set the private IP address of a DVPN server to 192.168.0.
54 ● public-ip 3Com Router 5000 Family and Router 6000 Family Command Reference public-ip Purpose Use the public-ip command to specify a public IP address of a specified DVPN server. Use the undo public-ip command to remove the public IP address of a specified DVPN server. Syntax public-ip ip-address undo public-ip ip-address Parameters ip-address Default No public IP address of the specified DVPN server is configured by default. Example Set the public IP address of a specified DVPN server to 61.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dvpn all ● 55 reset dvpn all Purpose Use the reset dvpn all command to clear all operating information about a specified DVPN domain and to initiate the DVPN domain. Syntax reset dvpn all dvpn-id Parameters dvpn-id Example Reset DVPN 2. ID of a DVPN domain.
56 ● reset dvpn map 3Com Router 5000 Family and Router 6000 Family Command Reference reset dvpn map Purpose Use the reset dvpn map command to clear a specified map. Syntax reset dvpn map ip-address port [ control-id ] Parameters ip-address Public IP address. port Port number. Valid values are 1 to 65,535. control-id ID number of the map. Valid values are 1 to 4,294,967,295. Example Clear the map with an IP address of 10.0.0.2, a port number of 9876, and a control-id of 123456.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dvpn session ● 57 reset dvpn session Purpose Use the reset dvpn session command to clear a specified session. Syntax reset dvpn session dvpn-id private-ip Parameters dvpn-id ID number of a DVPN domain. Valid values are 1 to 65,535. private-ip Private IP address. Example Clear the session with a private IP address of 10.0.0.2 in DVPN 2. <3Com> reset dvpn session 2 10.0.0.
58 ● reset dvpn statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset dvpn statistics Purpose Use the reset dvpn statistics command to clear all the statistics information of a DVPN module. Syntax reset dvpn statistics Parameters None Example Clear the DVPN statistics information.
3Com Router 5000 Family and Router 6000 Family Command Reference reset l2tp session ● 59 reset l2tp session Purpose Use the reset l2tp session command to disconnect a session. When the user calls in, the session can be set up again. Syntax reset l2tp session session-id Parameters session-id Example Disconnect an L2TP session. Local identifier of a session connection.
60 ● reset l2tp tunnel 3Com Router 5000 Family and Router 6000 Family Command Reference reset l2tp tunnel Purpose Use the reset l2tp tunnel command to clear the specified tunnel connection and all sessions on the tunnel. Syntax reset l2tp tunnel { remote-name | tunnel-id } Parameters remote-name Name of the peer end of the tunnel, comprised of a character string from 1 to 30 characters long. tunnel-id Local ID of the tunnel. Example Clear the tunnel connection with the peer name of AS8010.
3Com Router 5000 Family and Router 6000 Family Command Reference reset l2tp user ● 61 reset l2tp user Purpose Use the reset l2tp user command to disconnect the L2TP connection of the specified user. Syntax reset l2tp user user-name Parameters user-name Example Disconnect the current L2TP user. L2TP user name. <3Com> reset l2tp user 3Com@h3c View This command can be used in the following views: ■ User view Description When the user calls in, the connection can be set up.
62 ● session algorithm-suite 3Com Router 5000 Family and Router 6000 Family Command Reference session algorithm-suite Purpose Use the session algorithm-suite command to specify the algorithm suite a session uses. Use the undo session algorithm-suite command to revert to the default algorithm suite. Syntax session algorithm-suite suite-number undo session algorithm-suite Parameters Example suite-number Algorithm suite number. Valid values are 0 to 12. If no value is specified, the default is 1.
3Com Router 5000 Family and Router 6000 Family Command Reference session idle-time ● 63 session idle-time Purpose Use the session idle-time command to set the L2TP session idle-timeout timer. Upon expiration of this timer, the L2TP session is disconnected. Use the undo session idle-time command to disable the idle-timeout timer. Syntax session idle-time time undo session idle-time Parameters time Default By default the 2TP session never expires. Example Enter L2TP group view.
64 ● session idle-timeout 3Com Router 5000 Family and Router 6000 Family Command Reference session idle-timeout Purpose Use the session idle-timeout command to set the idle timeout time for sessions. Use the undo session idle-timeout command to revert to the default idle timeout time. Syntax session idle-timeout time-interval undo session idle-timeout Parameters time-interval Example Set the idle timeout time to 30 seconds. Idle timeout time. Valid values are 60 seconds to 86,400 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference session keepalive-interval ● 65 session keepalive-interval Purpose Use the session keepalive-interval command to set the keepalive interval of sessions. Use the undo session keepalive-interval command to revert to the default keepalive interval. Syntax session keepalive-interval time-interval undo session keepalive-interval Parameters time-interval Example Set the keepalive interval to 30 seconds. Keepalive interval.
66 ● session setup-interval 3Com Router 5000 Family and Router 6000 Family Command Reference session setup-interval Purpose Use the session setup-interval command to set the interval for sending requests to establish a session (Setup request). Setup request packets are sent regularly until the session is established. Use the undo session setup-interval command to revert to the default setup interval.
68 ● source 3Com Router 5000 Family and Router 6000 Family Command Reference The same source address and destination address cannot be configured on two or more tunnel interfaces using the same encapsulation protocol.
3Com Router 5000 Family and Router 6000 Family Command Reference start l2tp ● 69 start l2tp Purpose Use the start l2tp command to specify conditions triggering the local end to place calls when it works as L2TP LAC. Use the undo start l2tp command to delete the specified triggering conditions. Syntax start l2tp { ip ip-addr [ ip ip-addr ] [ ip ip-addr ] ... } { domain domain-name | fullusername user-name } undo start Parameters Example ip ip-addr IP address of the peer end of the tunnel (LNS).
70 ● start l2tp 3Com Router 5000 Family and Router 6000 Family Command Reference Conflicts may exist between these VPN user judgment ways. For example, LNS address specified according to full username is 1.1.1.1, while that according to domain name is 1.1.1.2. To avoid situations like this, a user searching order is necessary to be specified. The system always starts a search by looking for the specified L2TP group by full username; if finding no match, it continues the search by domain name.
3Com Router 5000 Family and Router 6000 Family Command Reference start l2tp tunnel ● 71 start l2tp tunnel Purpose Use the start l2tp tunnel command to enable the L2TP LAC to start L2TP tunnel connection. Syntax start l2tp tunnel Parameters None Example Enable the LAC to start L2TP tunnel connection. It requests the LNS at 1.1.1.1 first and then the LNS at 2.2.2.2 if no response is received. [3Com-l2tp1] start l2tp ip 1.1.1.1 2.2.2.
72 ● l2tp-auto-client enable 3Com Router 5000 Family and Router 6000 Family Command Reference l2tp-auto-client enable Purpose Use the l2tp-auto-client enable command to enable the LAC client to set up L2TP tunnel. Use the undo l2tp-auto-client enable command to disable the LAC client to set up L2TP tunnel. Syntax l2tp-auto-client enable undo l2tp-auto-client enable Parameters None Example Enter virtual template interface view.
3Com Router 5000 Family and Router 6000 Family Command Reference l2tp enable ● 73 l2tp enable Purpose Use the l2tp enable command to enable the L2TP function. Use the undo l2tp enable command to disable the L2TP function. Syntax l2tp enable undo l2tp enable Parameters None Default By default, the L2TP function is disabled. Example Enable the L2TP function on the router.
74 ● l2tp-group 3Com Router 5000 Family and Router 6000 Family Command Reference l2tp-group Purpose Use the l2tp-group command to create an L2TP group. Use the undo l2tp-group command to delete the L2TP group. Syntax l2tp-group group-number undo l2tp-group group-number Parameters group-number Default By default, no L2TP group is created. Example Create L2TP group 2 and enter L2TP group 2 view. Number of L2TP group. Valid values are any integer from 1 to 1000.
3Com Router 5000 Family and Router 6000 Family Command Reference l2tpmoreexam enable ● 75 l2tpmoreexam enable Purpose Use the l2tpmoreexam enable command to enable the multi-instance function of L2TP. Use the undo l2tpmoreexam enable command to disable the function. Syntax l2tpmoreexam enable undo l2tpmoreexam enable Parameters None Default By default, L2TP multi-instance function is disabled. Example Enable the multi-instance function at the LNS side.
76 ● tunnel authentication 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel authentication Purpose Use the l2tp tunnel authentication command to enable L2TP tunnel authentication. Use the undo l2tp tunnel authentication command to disable L2TP tunnel authentication. Syntax tunnel authentication undo tunnel authentication Parameters None Default By default, L2TP tunnel authentication is performed. Example Set not to authenticate the peer end of the tunnel.
3Com Router 5000 Family and Router 6000 Family Command Reference tunnel avp-hidden ● 77 tunnel avp-hidden Purpose Use the tunnel avp-hidden command to configure Attribute Value Pair (AVP) data to be transmitted in hidden format. Use the undo tunnel avp-hidden command to restore the default transmission way of AVP data. Syntax tunnel avp-hidden undo tunnel avp-hidden Parameters None Default By default, the tunnel transmits AVP data in plain text.
78 ● tunnel flow-control 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel flow-control Purpose Use the tunnel flow-control command to enable L2TP tunnel flow-control. Use the undo tunnel flow-control command to disable the flow-control function. Syntax tunnel flow-control undo tunnel flow-control Parameters None Default By default, the L2TP tunnel flow-control function is not performed. Example Enable the flow-control function.
3Com Router 5000 Family and Router 6000 Family Command Reference tunnel keepstanding ● 79 tunnel keepstanding Purpose Use the tunnel keepstanding command to enable the tunnel-hold function of L2TP, preventing the tunnel from being disconnected when no session is present. Use the undo tunnel keepstanding command to disable the tunnel-hold function of L2TP. Syntax tunnel keepstanding undo tunnel keepstanding Parameters None Example Enter L2TP group view.
80 ● tunnel name 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel name Purpose Use the tunnel name command to specify local name of a tunnel. Use the undo tunnel name command to restore the local name to the default. Syntax tunnel name name undo tunnel name Parameters name Example Set local name of the tunnel to itsme. Local name of the tunnel, comprised of a character string from 1 to 30 characters long.
3Com Router 5000 Family and Router 6000 Family Command Reference tunnel password ● 81 tunnel password Purpose Use the tunnel password command to specify a password for tunnel authentication. Use the undo l2tp tunnel password command to remove the tunnel authentication password. Syntax tunnel password { simple | cipher } password undo tunnel password Parameters simple Password in plain text. cipher Password in ciphertext.
84 ● tunnel timer hello 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel timer hello Purpose Use the tunnel timer hello command to set a Hello packet forwarding interval. Use the undo tunnel timer hello command to restore Hello packet forwarding interval in the tunnel to the default. Syntax tunnel timer hello hello-interval undo tunnel timer hello Parameters hello-interval Example Set Hello packet forwarding interval to 99 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 QUALITY OF SERVICE ALPHABETICAL LISTING OF COMMANDS car 3 classifier behavior 5 display qos car interface 7 display qos carl 9 display qos cbq interface 11 display qos cql 13 display qos cq interface 15 display qos lr interface 17 display qos policy 19 display qos policy interface 21 display qos pq interface 23 display qos pql 25 display qos gts interface 27 display qos rtpq interface 29 display traffic behavior 31 display traffic classi
2● 3Com Router 5000 Family and Router 6000 Family Command Reference qos cql queue 89 qos cql queue serving 91 qos fifo queue-length 93 qos gts 95 qos lr 97 qos max-bandwidth 99 qos policy 101 qos pq 103 qos pql default-queue 105 qos pql inbound-interface 107 qos pql protocol 109 qos pql queue 111 qos reserved-bandwidth 113 qos rtpq 115 qos wfq 117 queue af 119 queue ef 121 queue-length 123 queue wfq 125 remark atmclp 127 remark dot1p 129 remark dsc 131 remark fr-de 133 remark ip-precedence 135 traffic beh
3Com Router 5000 Family and Router 6000 Family Command Reference car ● 3 car Purpose Use the car command to configure traffic monitoring for a behavior. Use the undo car command to delete the configuration of traffic monitoring. Syntax car cir committed-information-rate [ cbs committed-burst-size excess-burst-size ] [ green action [ red action] ] ebs undo car Parameters cir committed-information-rateCommitted information rate of traffic. It should not exceed CBS x 20.
4 ● car Example 3Com Router 5000 Family and Router 6000 Family Command Reference Use traffic monitor for a behavior. The normal traffic of packets is 38400 bps. Burst traffic twice of the normal traffic can pass initially and later the traffic is transmitted normally when the rate does not exceed 38400bps. When the rate exceeds 38400 bps, the precedence of the packet turns to 0 and the packet is transmitted.
3Com Router 5000 Family and Router 6000 Family Command Reference classifier behavior ● 5 classifier behavior Purpose Use the classifier behavior command to specify the behavior for the class in the policy. Use the undo classifier command to remove the application of the class in the policy. Syntax classifier tcl-name behavior behavior-name undo classifier tcl-name Parameters Example tcl-name Must be the name of the defined class, the system-defined or user-defined class.
6 ● classifier behavior 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos car interface ● 7 display qos car interface Purpose Use the display qos car interface command to view parameter configuration and running statistics of CAR at each or all interfaces. Syntax display qos car interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number.
8 ● display qos car interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos carl ● 9 display qos carl Purpose Use the display qos carl command to view a certain rule or all the rules of CARL. Syntax display qos carl [ carl-index ] Parameters carl-index Example Display the first rule of CAR list. Committed Access Rate List (CARL) number, in the range of 1 to 199.
10 ● display qos carl 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos cbq interface ● 11 display qos cbq interface Purpose Use the display qos cbq interface command to view CBQ configuration information and operating status, the specified PVC on specified ATM interface or on all interfaces. Syntax display qos cbq interface [ interface-type interface-number [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] Parameters interface-type Interface type. interface-number Interface number.
12 ● display qos cbq interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos cql ● 13 display qos cql Purpose Use the display qos cql command to view contents of customized queue lists (CPL). Syntax display qos cql Parameters None Default Default values will not be displayed. Example Display information about a CQL.
14 ● display qos cql 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos cq interface ● 15 display qos cq interface Purpose Use the display qos cq interface command to view configuration and statistics of customized queues (CQ) at interfaces. Syntax display qos cq interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display CQ configuration and statistics at the interface Ethernet 6/0/0.
16 ● display qos cq interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos lr interface ● 17 display qos lr interface Purpose Use the display qos lr interface command to view LR configuration and statistics of an interface. Syntax display qos lr interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display LR configuration and statistics information of all interfaces.
18 ● display qos lr interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos policy ● 19 display qos policy Purpose Use the display qos policy command to display the configuration information of the specified class or all the classes and associated behaviors in the specified policy or all policies. Syntax display qos policy { system-defined | user-defined } [ policy-name [ classifier tcl-name ] ] Parameters system-defined Policy pre-defined by the system.
20 ● display qos policy View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display qos policy interface ● 21 display qos policy interface Purpose Use the display qos policy interface command to view the configuration and operating state about the policy on the specified interface, on the specified PVC on a particular ATM interface or on all interfaces and PVCs.
22 ● display qos policy interface 3Com Router 5000 Family and Router 6000 Family Command Reference Conformed: 0/0 (Packets/Bytes) Exceeded : 0/0 (Packets/Bytes) Expedited Forwarding: Bandwidth 50 (Kbps), CBS 1500 (Bytes) Matched : 0/0 (Packets/Bytes) Enqueued : 0/0 (Packets/Bytes) Discarded: 0/0 (Packets/Bytes) Classifier: database Matched : 0/0 (Packets/Bytes) Operator: AND Rule(s) : if-match acl 3131 if-match inbound interface Ethernet10/2/0 Behavior: database General Traffic Shape: CIR 30000 (bps), CBS
3Com Router 5000 Family and Router 6000 Family Command Reference display qos pq interface ● 23 display qos pq interface Purpose Use the display qos pq interface command to view the configuration and statistics of priority queues (PQ) at interfaces. Syntax display qos pq interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display the PQ configuration and statistics at interface Ethernet 6/0/0.
24 ● display qos pq interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos pql ● 25 display qos pql Purpose Use the display qos pql command to view contents of priority queue lists (PQL). Syntax display qos pql [ pql-index ] Parameters pql-index Default Default items are not displayed. Example Display PQLs. Priority queue list number.
26 ● display qos pql 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos gts interface ● 27 display qos gts interface Purpose Use the display qos gts interface command to view GTS configuration and accounting information of certain interface or all interfaces. Syntax display qos gts interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display GTS configuration and accounting information of all interfaces.
28 ● display qos gts interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos rtpq interface ● 29 display qos rtpq interface Purpose Use the display qos rtpq interface command to view information of the current IP RTP Priority queue, including the current RTP queue depth and number of RTP packets dropped, and display the RTP priority queue configuration and statistics on an interface or on all interfaces.
30 ● display qos rtpq interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display traffic behavior ● 31 display traffic behavior Purpose Use the display traffic behavior command to display the information of the traffic behavior configured on the router. Syntax display traffic behavior { system-defined | user-defined } [ behavior-name ] Parameters system-defined Behavior pre-defined by the system. user-defined Behavior pre-defined by the user. behavior-name Behavior name.
32 ● display traffic behavior 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display traffic classifier ● 33 display traffic classifier Purpose Use the display traffic classifier command to view the configuration information about class of the router. Syntax display traffic classifier { system-defined | user-defined } [ tcl-name ] Parameters system-defined Class pre-defined by the system. user-defined Class pre-defined by the user. tcl-name Class name.
34 ● display traffic classifier 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference display qos wfq interface ● 35 display qos wfq interface Purpose Use the display qos wfq interface command to view WFQ (weighted fair queuing) configuration and statistics of an interface. Syntax display qos wfq interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display the WFQ configuration and statistics of Ethernet 6/0/0 interface.
36 ● display qos wfq interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference flow-interval qos ● 37 flow-interval qos Purpose Use the flow-interval qos command to configure QoS policy traffic statistical interval and QoS policy rate updating interval. Use the undo flow-interval qos command to restore the default. Syntax flow-interval qos flow-interval [ update-interval seconds ] undo flow-interval qos Parameters Example flow-interval QoS policy traffic statistical interval, in the range 1 to 30 minutes.
38 ● flow-interval qos Related Command 3Com Router 5000 Family and Router 6000 Family Command Reference display qos policy
3Com Router 5000 Family and Router 6000 Family Command Reference gts ● 39 gts Purpose Use the gts command to configure traffic shaping for a behavior. Use the undo gts command to delete traffic shaping for a behavior. Syntax gts cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size [ queue-length queue-length ] ] ] undo gts Parameters cir committed-information-rateCIR, in the range of 8000 to 155,000,000 bps.
40 ● gts 3Com Router 5000 Family and Router 6000 Family Command Reference If this command is frequently configured on the same traffic behavior, the last configuration will overwrite the previous ones.
3Com Router 5000 Family and Router 6000 Family Command Reference if-match ● 41 if-match Purpose Use the if-match command to define the match rule of a class. Use the undo if-match command to delete the match rule of a class. Syntax if-match [ not ] match-criteria undo if-match [ not ] match-criteria Parameters not Not match the class. match-criteria Class match rules.
42 ● if-match 3Com Router 5000 Family and Router 6000 Family Command Reference Matched : 0/0 (Packets/Bytes) 1 Min Rate: 0 bps Operator: AND Rule(s) : if-match inbound-interface e0/0/0 Behavior: test -none- View This command can be used in the following views: ■ Related Command Class view traffic classifier
3Com Router 5000 Family and Router 6000 Family Command Reference if-match {destination-mac | source-mac} ● 43 if-match {destination-mac | source-mac} Purpose Use the if-match { destination-mac | source-mac } command to define match rule of destination or source MAC address. Use the undo if-match { destination-mac | source-mac } command to delete the match rule of destination or source MAC address.
44 ● if-match {destination-mac | source-mac} 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match acl ● 45 if-match acl Purpose Use the if-match acl command to define ACL match rule. Use the undo if-match acl command to delete ACL match rule. Syntax if-match [ not ] acl access-list-number undo if-match [ not ] acl access-list-number Parameters Example access-list-number ACL number. not Not matching the class. Define a class to match ACL3101.
46 ● if-match acl 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match any ● 47 if-match any Purpose Use the if-match any command to define the rule matching all packets. Use the undo if-match any command to delete the rule matching all packets. Syntax if-match [ not ] any undo if-match [ not ] any Parameters not Example Define the rule matching all packets. Not match the class.
48 ● if-match any 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match atmclp ● 49 if-match atmclp Purpose Use the if-match atmclp command to create a cell loss priority (CLP) bit match rule defining that ATM cells with CLP bit set to 1 are matched. Use the if-match not atmclp command to create a CLP bit match rule defining that ATM cells with CLP bit set to 0 are matched. Use the undo if-match atmclp command to delete the CLP bit match rule.
50 ● if-match atmclp 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match classifier ● 51 if-match classifier Purpose Use the if-match classifier command to define class-map match rule. Use the undo if-match classifier command to delete the class-map match rule. Syntax if-match [ not ] classifier tcl-name undo if-match [ not ] classifier tcl-name Parameters tcl-name Example Define match rule of class2 and class1 must be used. Therefore, class1 is configured first.
52 ● if-match classifier 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match dot1p-cos ● 53 if-match dot1p-cos Purpose Use the if-match dot1p-cos command to define a COS field match rule for VLAN packets. Use the undo if-match atmclp command to delete the specified COS field match rule for VLAN packets. Syntax if-match [ not ] dot1p-cos cos-value if-match [ not ] dot1p-cos cos-value Parameters cos-value Example Define a rule, setting that the VLAN packets with COS field of 1, 3, or 6 are matched.
54 ● if-match dot1p-cos 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match dscp ● 55 if-match dscp Purpose Use the if-match dscp command to define an IP DSCP match rule. Use the undo if-match dscp command to delete an IP DSCP match rule. Syntax if-match [ not ] dscp dscp-value undo if-match [ not ] dscp dscp-value Parameters dscp-value Example Define the match rule of class1 as matching the packets with the DSCP value as 1, 6 or 9. DSCP value, in the range of 0 to 63.
56 ● if-match dscp 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match fr-de ● 57 if-match fr-de Purpose Use the if-match fr-de command to define an FR DE matching rule. Use the undo if-match fr-de command to delete the FR DE matching rule. Syntax if-match [not] fr-de undo if-match [not] fr-de Parameters None Example Define a matching rule for class1, specifying to match FR packets with the DE bit set to 1.
58 ● if-match fr-de 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match inbound-interface ● 59 if-match inbound-interface Purpose Use the if-match inbound-interface command to define ingress interface match rule of a class. Use the undo if-match inbound-interface command to delete ingress interface match rule of a class.
60 ● if-match inbound-interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match ip-precedence ● 61 if-match ip-precedence Purpose Use the if-match ip-precedence command to define IP precedence match rule. Use the undo if-match ip-precedence command to delete IP precedence match rule.
62 ● if-match ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match outbound-interface ● 63 if-match outbound-interface Purpose Use the if-match outbound-subinterface command to define an outbound subinterface matching rule for the class. Use the undo if-match inboud-subinterface command to delete an outbound subinterface matching rule from the class. Syntax if-match [ not ] outbound-subinterface interface-type interface-number.
64 ● if-match outbound-interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match protocol ● 65 if-match protocol Purpose Use the if-match protocol command to define protocol match rule. Use the undo if-match protocol command to delete protocol match rule. Syntax if-match [ not ] protocol protocol-name undo if-match [ not ] protocol protocol-name Parameters protocol-name Example Define the packet whose class match protocol is IP. Protocol name.
66 ● if-match protocol 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference if-match rtp ● 67 if-match rtp Purpose Use the if-match rtp command to define port match rule of RTP. Use the undo if-match rtp command to delete the port match rule of RTP. Syntax if-match [ not ] rtp start-port starting-port-number end-port end-port-number undo if-match [ not ] rtp start-port starting-port-number end-port end-port-number Parameters Example starting-port-number Starting RTP port number, in the range of 2000 to 65535.
68 ● if-match rtp 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference lr ● 69 lr Purpose Use the lr command to configure LR. Use the undo lr command to disable LR. Syntax lr cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size] ] undo lr Parameters committed-information-rateCIR in the range 8000 to 155,000,000 bps. committed-burst-size CBS in the range 15,000 to 155,000,000 bits.
70 ● lr 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference lr percent ● 71 lr percent Purpose 1Use the lr percent command to configure LR. Use the undo lr percent command to disable LR. Syntax lr percent cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] undo lr Parameters committed-information-rateCIR in percentages, in the range 1 to 100. committed-burst-size CBS in the range 50 to 2000 milliseconds. The default CBS is 500 milliseconds.
72 ● lr percent 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qmtoken ● 73 qmtoken Purpose Use the qmtoken command to configure the number of transmitted tokens. Use the undo qmtoken command to disable the token function of QoS. Syntax qmtoken token-number undo qmtoken Parameters token-number Default By default, the token function of QoS is disabled. Example Set the number of transmitted tokens to 1. The number of transmitted tokens, in the range 1 to 50.
74 ● qmtoken 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos apply policy ● 75 qos apply policy Purpose Use the qos apply policy command to apply a service policy to the interface. Use the undo qos apply policy command to delete the associated policy from the interface. Syntax qos apply policy policy-name { inbound | outbound [ dynamic ] } undo qos apply policy { inbound | outbound } Parameters Example inbound Inbound direction. outbound Outbound direction. policy-name Policy name.
76 ● qos apply policy 3Com Router 5000 Family and Router 6000 Family Command Reference ■ When some channels in use are disconnected resulting in inefficient bandwidth use, FIFO queuing applies.
3Com Router 5000 Family and Router 6000 Family Command Reference qos car ● 77 qos car Purpose Use the qos car command to implement TP policy on an interface. Use the undo qos car command to remove a certain TP policy at the interface. This command only applies to IP packets.
78 ● qos car 3Com Router 5000 Family and Router 6000 Family Command Reference remark-prec-pass new-precedence Remarks the packet with a new IP priority and forwards the packet. It ranges from 0 to 7. remark-mpls-exp-continue new-mpls-exp Remarks the received packet with a new MPLS EXP value in the range 0 to 7 and hands it over to the next CAR policy. remark-mpls-exp-pass new-mpls-exp Example Remarks the received packet with a new MPLS EXP value in the range 0 to 7 and forwards it to the destination.
3Com Router 5000 Family and Router 6000 Family Command Reference qos carl ● 79 qos carl Purpose Use the qos carl command to establish or modify a CARL. Use the undo qos carl command to delete a CARL. Syntax qos carl carl-index { precedence precedence-value | mac mac-address } undo qos carl carl-index Parameters Example carl Committed access rate list. carl-index CAR list number, in the range 1 to 199. precedence-value Precedence, in the range 0 to 7. mac-address Hexadecimal MAC address.
80 ● qos carl 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos cq ● 81 qos cq Purpose Use the qos cq cql command to apply the customized queue to an interface. Use the undo qos cq command to restore the congestion management policy at the interface to FIFO. Syntax qos cq cql cql-index undo qos cq Parameters cql-index Default By default, the congestion management policy at the interfaces is FIFO. Example Apply the CQ 5 on the Ethernet 6/0/0. CQL index, ranging 1 to 16.
82 ● qos cq 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos cql default-queue ● 83 qos cql default-queue Purpose Use the qos cql default-queue command to assign a default queue for those packets that do not match any rule in the CQL. Use the undo qos cql default-queue command to restore to the default queue. Syntax qos cql cql-index default-queue queue-number undo qos cql cql-index default-queue Parameters Example cql-index CQL index, ranging 1 to 16.
84 ● qos cql default-queue 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos cql inbound-interface ● 85 qos cql inbound-interface Purpose Use the qos cql inbound-interface command to establish classification rules based on interfaces. Use the undo qos cql inbound-interface command to delete corresponding classification rules.
86 ● qos cql inbound-interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos cql protocol ● 87 qos cql protocol Purpose Use the qos cql protocol command to establish classification rules based on the protocol type. Use the undo qos cql protocol command to delete corresponding classification rules. Syntax qos cql cql-index protocol protocol-name queue-key queue-number key-value queue undo qos cql cql-index protocol protocol-name [ queue-key key-value ] Parameters cql-index CQL index, ranging 1 to 16.
88 ● qos cql protocol View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description System view The system matches a packet to a rule according to the order that rules are configured. When the packet matches a certain rule, the search process is completed. For the same cql-index, this command can be repeatedly used, establishing multiple classification rules for IP packets.
3Com Router 5000 Family and Router 6000 Family Command Reference qos cql queue ● 89 qos cql queue Purpose Use the qos cql queue command to configure the length of a queue, namely, the number of packets a queue can hold. Use the undo qos cql queue command to restore the default. Syntax qos cql cql-index queue queue-number queue-length queue-length undo qos cql cql-index queue queue-number queue-length Parameters Example cql-index CQL index, ranging 1 to 16.
90 ● qos cql queue 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos cql queue serving ● 91 qos cql queue serving Purpose Use the qos cql queue serving command to set the byte-count of the packets sent from a given queue in each poll. Use the undo qos cql queue serving command to restore the byte-count of sent packets to the default value. Syntax qos cql cql-index queue queue-number serving byte-count undo qos cql cql-index queue queue-number serving Parameters cql-index CQL index, ranging 1 to 16.
92 ● qos cql queue serving 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos fifo queue-length ● 93 qos fifo queue-length Purpose Use the qos fifo queue-length command to set the length limit of FIFO queue. Use the undo qos fifo queue-length command to restore the default value of the queue length. Syntax qos fifo queue-length queue-length undo qos fifo queue-length Parameters queue-length Default By default, queue-length is 75. Example Set the length of FIFO queue to 100.
94 ● qos fifo queue-length 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos gts ● 95 qos gts Purpose Use the qos gts command to set shaping parameters for all or a specified type of traffic and perform traffic shaping. Use the undo qos gts command to remove the shaping configuration for all or a specified type of traffic.
96 ● qos gts 3Com Router 5000 Family and Router 6000 Family Command Reference qos gts any is used to set shaping parameters for all packets. qos gts acl cannot be used together with the qos gts any. Repeated using qos gts will replace configuration set earlier.
3Com Router 5000 Family and Router 6000 Family Command Reference qos lr ● 97 qos lr Purpose Use the qos lr command to limit the transmitting rate of the interface. Use the undo qos lr command to remove the limit. Syntax qos lr cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] undo qos lr Parameters cir committed-information-rateCIR, in the range of 8000 to 155,000,000 bps. cbs committed-burst-size CBS, in the range of 15,000 to 155,000,000 bits.
98 ● qos lr 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos max-bandwidth ● 99 qos max-bandwidth Purpose Use the qos max-bandwidth command to configure the maximum interface bandwidth used when CBQ enqueues packets. Use the undo qos max-bandwidth command to cancel the bandwidth configuration. Syntax qos max-bandwidth bandwidth undo qos max-bandwidth Parameters bandwidth Example Set the bandwidth of virtual-template 1 to 128 kbps. Available bandwidth of the interface.
100 ● qos max-bandwidth 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos policy ● 101 qos policy Purpose Use the qos policy command to define a policy and enter policy view. Use the undo qos policy command to delete a policy. Syntax qos policy policy-name undo qos policy policy-name Parameters policy-name Example Define a policy named as 3COM. Policy name.
102 ● qos policy 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos pq ● 103 qos pq Purpose Use the qos pq command to apply a group of priority list to an interface. Use the undo qos pq command to restore the congestion management policy at the interface to FIFO. Syntax qos pq pql pql-index undo qos pq Parameters pql-index Default By default, the congestion management policy at the interfaces is FIFO. Example Apply the priority list 12 to the Ethernet 0/0/0. PQL index, ranging 1 to 16.
104 ● qos pq 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos pql default-queue ● 105 qos pql default-queue Purpose Use the qos pql default-queue command to designate the packets without corresponding rules to a default queue. Use the undo qos pql default-queue command to cancel the configuration and restore the default value.
106 ● qos pql default-queue 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos pql inbound-interface ● 107 qos pql inbound-interface Purpose Use the qos pql inbound-interface command to establish classification rules based on interfaces. Use the undo qos pql inbound-interface command to delete the corresponding classification rule.
108 ● qos pql inbound-interface 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos pql protocol ● 109 qos pql protocol Purpose Use the qos pql inbound-interface command to establish classification rules based on interfaces. Use the undo qos pql inbound-interface command to delete the corresponding classification rule.
110 ● qos pql protocol Example 3Com Router 5000 Family and Router 6000 Family Command Reference Specify PQ rule 1 to make IP packets matching ACL 3100 be put into the top queue. [3Com ] qos pql 1 protocol ip acl 3100 queue top View This command can be used in the following views: ■ Description Related Commands System view This command can match packets according to which interface the packet comes from.
3Com Router 5000 Family and Router 6000 Family Command Reference qos pql queue ● 111 qos pql queue Purpose Use the qos pql queue command to specify the maximum number of packets that can wait in each of the priority queues, or the length of a PQ. Use the undo qos pql queue command to restore to the default value of each PQ length.
112 ● qos pql queue 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos reserved-bandwidth ● 113 qos reserved-bandwidth Purpose Use the qos reserved-bandwidth command to set the maximum reserved bandwidth percentage. Use the undo qos reserved-bandwidth command to restore the default value. Syntax qos reserved-bandwidth pct percentage undo qos reserved-bandwidth Parameters percentage Example Set the maximum reserved bandwidth allocated for RTP priority queue to 80% of the available bandwidth.
114 ● qos reserved-bandwidth 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference qos rtpq ● 115 qos rtpq Purpose Use the qos rtpq command to enable RTP queue feature on an interface so as to reserve a real-time service for the RTP packets sent to some UDP destination port ranges. Use the undo qos rtpq command to disable the RTP queuing feature of the interface.
116 ● qos rtpq 3Com Router 5000 Family and Router 6000 Family Command Reference The parameter "bandwidth" should be set greater than the service-required bandwidth so as to prevent conflict caused by the burst traffic. However, the bandwidth should be no greater than 75% of the total bandwidth. If you need to configure the bandwidth to be greater than 75% of the total bandwidth, please first change the maximum reserved bandwidth via qos reserved-bandwidth command.
3Com Router 5000 Family and Router 6000 Family Command Reference qos wfq ● 117 qos wfq Purpose Use the qos wfq command to apply WFQ to and configure WFQ parameters on the interface or modify WFQ parameters on the interface. Use the undo qos wfq command to restore the default congestion management mechanism FIFO.
118 ● qos wfq Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ display interface ■ display qos wfq interface
3Com Router 5000 Family and Router 6000 Family Command Reference queue af ● 119 queue af Purpose Use the queue af command to configure the class to perform the assured-forwarding and the minimum bandwidth used. Use the undo queue af command to cancel the configuration. Syntax queue af bandwidth { bandwidth | pct percentage } undo queue af Parameters Example bandwidth Bandwidth in Kbps, in the range of 8 to 1000000.
120 ● queue af 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference queue ef ● 121 queue ef Purpose Use the queue ef command to configure expedited-forwarding packets to the absolute priority queue and configure the maximum bandwidth. Use the undo queue ef command to cancel the configuration. Syntax queue ef bandwidth { bandwidth [ cbs committed-burst-size ] | pct percentage [ cbs_ratio ratio ] } undo queue ef Parameters Example bandwidth Bandwidth in Kbps, in the range of 8 to 1000000.
122 ● queue ef Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ qos policy ■ traffic behavior ■ classifier behavior
3Com Router 5000 Family and Router 6000 Family Command Reference queue-length ● 123 queue-length Purpose Use the queue-length command to configure maximum queue length. Use the undo queue-length command to delete configuration. Syntax queue-length queue-length undo queue-length Parameters queue-length Default By default, tail drop is configured. Example Configure tail drop and set the maximum queue length to 16. The maximum threshold value of the queue, in the range of 1 to 512.
124 ● queue-length 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference queue wfq ● 125 queue wfq Purpose Use the queue wfq command to configure the default-class to use WFQ. Use the undo queue wfq command to .delete the configuration. Syntax queue wfq [ queue-number total-queue-number ] undo queue wfq Parameters total-queue-number Example Configure WFQ for default-class and the queue number is 16.
126 ● queue wfq 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference remark atmclp ● 127 remark atmclp Purpose Use the remark atmclp command to have the system remark the CLP bit of ATM packets in the class. Use the undo remark atmclp command to disable remarking the CLP bit of ATM packets. Syntax remark atmclp atmclp-value undo remark atmclp Parameters atmclp-value Default By default, the CLP bit of ATM packets is not remarked. Example Remark the CLP bit of ATM packets to 1.
128 ● remark atmclp 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference remark dot1p ● 129 remark dot1p Purpose Use the remark dot1p command to configure the 802.1p priority value in the VLAN packets of a class. Use the undo remark dot1p command to remove the 802.1p priority value from the VLAN packets. Syntax remark dot1p cos-value undo remark dot1p Parameters cos-value Default By default, VLAN packets have no 802.1p priority value. Example Set the 802.
130 ● remark dot1p 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference remark dsc ● 131 remark dsc Purpose Use the remark dscp command to set a remarked DSCP value for IP packets belonging to the class. Use the undo remark dscp command to disable DSCP remark. Syntax remark dscp dscp-value undo remark dscp Parameters dscp-value Default By default, DSCP remark is disabled. Example Remark the DSCP of the IP packets belonging to the class to 6.
132 ● remark dsc View Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Traffic Behavior view ■ qos policy ■ traffic behavior ■ classifier behavior
3Com Router 5000 Family and Router 6000 Family Command Reference remark fr-de ● 133 remark fr-de Purpose Use the remark fr-de command to set the remarked DE bit of frame relay packets. Use the undo remark fr-de command to remove the setting. Syntax remark fr-de fr-de-value undo remark fr-de Parameters fr-de-value Default By default, DE bit remark is disabled. Example Remark the DE bit in frame relay packets to 1. Value of the DE flag bit in the frame relay packet, 0 or 1.
134 ● remark fr-de 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference remark ip-precedence ● 135 remark ip-precedence Purpose Use the remark ip-precedence command to configure IP precedence remark. Use the undo remark ip-precedence command to disable IP precedence remark. Syntax remark ip-precedence ip-precedence-value undo remark ip-precedence Parameters ip-precedence-value Default By default, IP precedence remark is disabled. Example Remark the IP precedence of the matched IP packets to 6.
136 ● remark ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference traffic behavior ● 137 traffic behavior Purpose Use the traffic behavior command you can define a traffic behavior and enter the behavior view. Use the undo traffic behavior command to delete a traffic behavior. Syntax traffic behavior behavior–name undo traffic behavior behavior–name Parameters behavior-name Example Define a traffic behavior named behavior1. Behavior name.
138 ● traffic behavior 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference traffic classifier ● 139 traffic classifier Purpose Use the traffic classifier command to define a class and enter the class view. Use the undo traffic classifier command to delete a class. Syntax traffic classifier tcl-name [ operator { and | or } ] undo traffic classifier tcl-name Parameters and Specifies the relation between the rules in the class as logic AND. That is, the packet that matches all the rules belongs to this class.
140 ● traffic classifier 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference traffic-policy ● 141 traffic-policy Purpose Use the traffic-policy command to associate a sub-policy to the behavior. Use the undo traffic-policy command to remove the association. Syntax traffic-policy policy-name undo traffic-policy Parameters policy-name Example Embed the sub-policy Child in the policy for the traffic behavior database Specifies a policy by its name.
142 ● traffic-policy 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference wred ● 143 wred Purpose Use the wred command to configure drop mode as weighted random early detection (WRED). Use the undo wred command to delete the configuration. This command can be used only after the queue af command has been configured. The wred command and queue-length command can not be used simultaneously. Other configurations under the random drop will be deleted when this command is deleted.
144 ● wred 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference wred dscp ● 145 wred dscp Purpose Use the wred dscp command to set DSCP lower-limit, upper-limit and drop probability denominator of WRED. Use the undo wred dscp command to delete the configuration. This command can be used only after the wred command has been used to enable WRED drop mode based on DSCP.
146 ● wred dscp Example 3Com Router 5000 Family and Router 6000 Family Command Reference high-limit Upper threshold value, in the range of 1 to 1024. It is 30 by default. discard-prob Denominator of drop probability, in the range of 1 to 255. It is 10 by default. Set the queue lower-limit to 20, upper-limit to 40 and discard probability to 15 for the packet whose DSCP is 3.
3Com Router 5000 Family and Router 6000 Family Command Reference wred ip-precedence ● 147 wred ip-precedence Purpose Use the wred ip-precedence command to set precedence lower-limit, upper-limit and drop probability denominator of WRED. This command can be used only after the wred command has been used to enable WRED drop mode based on IP precedence.
148 ● wred ip-precedence 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference wred weighting-constant ● 149 wred weighting-constant Purpose Use the wred weighting-constant command to set exponential for the calculation of average queue length by WRED. This command can be used only after the queue af command has been configured and the wred command has been used to enable WRED drop mode.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 RELIABILITY ALPHABETICAL LISTING OF COMMANDS debugging standby event 3 debugging vrrp 4 display standby flow 5 display standby state 7 display vrrp 9 standby bandwidth 10 standby interface 11 standby threshold 12 standby timer delay 13 standby timer flow-check 14 vrrp authentication-mode 15 vrrp ping-enable 16 vrrp un-check ttl 17 vrrp vrid preempt-mode 18 vrrp vrid priority 19 vrrp vrid timer advertise 20 vrrp vrid track 21 vrrp vrid vi
2● 3Com Router 5000 Family and Router 6000 Family Command Reference
4 ● debugging vrrp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging vrrp Purpose Use the debugging vrrp command to enable VRRP debugging. Use the undo debugging vrrp command to disable VRRP debugging. Syntax debugging vrrp { packet | state } undo debugging vrrp { packet | state } Parameters packet Enables VRRP packet debugging. state Enables VRRP state debugging. Default By default, VRRP debugging is disabled. Example Enable VRRP packet debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference display standby flow ● 5 display standby flow Purpose Use the display standby flow command to view statistics about the traffic on the main interfaces participating in backup load sharing. Syntax display standby flow Parameters None Example Set Serial 1/0/0, Serial 0/0/0 and Logic-channel0 to back up interface Serial 3/0/0 and configure backup load sharing on Serial 3/0/0.
6 ● display standby flow View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Any view
3Com Router 5000 Family and Router 6000 Family Command Reference display standby state ● 7 display standby state Purpose Use the display standby state command to view information about the main and standby interfaces. Syntax display standby state Parameters None Example Set Serial 1/0/0, Serial 0/0/0 and Logic-channel 0 to back up Serial 3/0/0, and configure backup load sharing on Serial 3/0/0.
8 ● display standby state 3Com Router 5000 Family and Router 6000 Family Command Reference Table 2 Information about the main and standby interfaces Item Main interface Standby interface Interface state UP, DOWN UP, DOWN, STANDBY Standby state MUP, MUPDELAY, MDOWN, MDOWNDELAY, MDESERT UP, UPDELAY, DOWN, DOWNDELAY, STANDBY, DESERT Standby flag M---MAIN: the interface is a main interface. S---Standby: the interface is a standby interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display vrrp ● 9 display vrrp Purpose Use the display vrrp command to view current configuration and state information about VRRP. Syntax display vrrp [ interface interface-name [ virtual-router-ID ] ] Parameters interface-name Specifies an interface by its name. The type of the interface must be Ethernet. virtual-router-ID Standby group number. Example Display information about all standby groups on the router.
10 ● standby bandwidth 3Com Router 5000 Family and Router 6000 Family Command Reference standby bandwidth Purpose Use the standby bandwidth command to configure the actual bandwidth that the main interface uses in backup load sharing. Use the undo standby bandwidth command to restore the default, that is, 0, to disable backup load sharing.
3Com Router 5000 Family and Router 6000 Family Command Reference standby interface ● 11 standby interface Purpose Use the standby interface command to specify a physical interface to back up the interface. Use the undo standby interface command to remove the specified standby interface. Syntax standby interface type number [ priority ] undo standby interface type number Parameters type Specifies the interface type. number Specifies the interface number.
12 ● standby threshold 3Com Router 5000 Family and Router 6000 Family Command Reference standby threshold Purpose Use the standby threshold command to configure backup load sharing on an interface or logical channel. Use the undo standby threshold command to disable backup load sharing on the interface or logical channel.
3Com Router 5000 Family and Router 6000 Family Command Reference standby timer delay ● 13 standby timer delay Purpose Use the standby timer delay command to set failover and fallback delays on the interface, avoiding frequent switchover caused by instability of interface state. Use the undo standby timer delay command to restore the default or 0, meaning switching without delay.
14 ● standby timer flow-check 3Com Router 5000 Family and Router 6000 Family Command Reference standby timer flow-check Purpose Use the standby timer flow-check command to configure the interval for checking the traffic size on the main interface. Use the undo standby timer flow-check command to restore the default or 30 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference vrrp authentication-mode ● 15 vrrp authentication-mode Purpose Use the vrrp authentication-mode command to configure authentication mode and authentication key for the VRRP standby groups on the interface. Use the undo vrrp authentication-mode command to disable authentication in the VRRP standby groups on the interface.
16 ● vrrp ping-enable 3Com Router 5000 Family and Router 6000 Family Command Reference vrrp ping-enable Purpose Use the vrrp ping-enable command to enable users to ping the virtual IP addresses of standby groups. Use the undo vrrp ping-enable command to disable users to ping the virtual IP addresses of standby groups. Syntax vrrp ping-enable undo vrrp ping-enable Parameters None Default By default, users cannot ping the virtual IP addresses of standby groups.
3Com Router 5000 Family and Router 6000 Family Command Reference vrrp un-check ttl ● 17 vrrp un-check ttl Purpose Use the vrrp un-check ttl command to disable the VRRP standby group to check the TTL field in VRRP packets. Use the undo vrrp un-check ttl command to enable the VRRP standby group to check the TTL field in VRRP packets. Any packet with TTL value other than 255 will be dropped.
18 ● vrrp vrid preempt-mode 3Com Router 5000 Family and Router 6000 Family Command Reference vrrp vrid preempt-mode Purpose Use the vrrp vrid preempt-mode command to enable preemption on the router and configure its preemption delay in the specified standby group. Use the undo vrrp vrid preempt-mode command to disable preemption on the router in the specified standby group.
3Com Router 5000 Family and Router 6000 Family Command Reference vrrp vrid priority ● 19 vrrp vrid priority Purpose Use the vrrp vrid priority command to configure the priority of the router in the specified standby group. Use the undo vrrp vrid priority command to restore the default. Syntax vrrp vrid virtual-router-ID priority priority-value undo vrrp vrid virtual-router-ID priority Parameters Example virtual-router-ID VRRP standby group number. Valid values are 1 to 255.
20 ● vrrp vrid timer advertise 3Com Router 5000 Family and Router 6000 Family Command Reference vrrp vrid timer advertise Purpose Use the vrrp vrid timer advertise command to configure the Adver_Timer of the specified standby group. Use the undo vrrp vrid timer advertise command to restore the default. Syntax vrrp vrid virtual-router-ID timer advertise adver-interval undo vrrp vrid virtual-router-ID timer advertise Parameters Example virtual-router-ID VRRP standby group number.
3Com Router 5000 Family and Router 6000 Family Command Reference vrrp vrid track ● 21 vrrp vrid track Purpose Use the vrrp vrid track command to configure the interface to be tracked. Use the undo vrrp vrid track command to disable tracking the specified interface. Syntax vrrp vrid virtual-router-ID track interface-name [ reduced priority-reduced ] undo vrrp vrid virtual-router-ID track [ interface-name ] Parameters Example virtual-router-ID VRRP standby group number. Valid values are 1 to 255.
22 ● vrrp vrid virtual-ip 3Com Router 5000 Family and Router 6000 Family Command Reference vrrp vrid virtual-ip Purpose Use the vrrp vrid virtual-ip command to create a standby group the first time that you add a virtual IP address or add a virtual IP address to it after that. Each standby group can accommodate up to 16 virtual IP addresses. Use the undo vrrp vrid virtual-ip virtual-router-ID command to remove a standby group.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 DIAL-UP COMMANDS ALPHABETICAL LISTING OF COMMANDS debugging dialer 3 debugging modem 4 dialer bundle 5 dialer bundle-member 6 dialer callback-center 7 dialer call-in 8 dialer circular-group 9 dialer disconnect 10 dialer enable-circular 11 dialer group 12 dialer isdn-leased 13 dialer number 14 dialer priority 16 dialer queue-length 17 dialer route 18 dialer-rule 20 dialer threshold 22 dialer timer autodial 24 dialer timer compete 25 diale
2● 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dialer ● 3 debugging dialer Purpose Use the debugging dialer command to enable DCC debugging. Syntax debugging dialer { all | event | packet } Parameters event Enables DCC event debugging. packet Enables DCC packet debugging.
4 ● debugging modem 3Com Router 5000 Family and Router 6000 Family Command Reference debugging modem Purpose Use the debugging modem command to enable Modem debugging. Syntax debugging modem Parameters None Example None View This command can be used in the following views: ■ Description User view According to the information output after executing this command, the user can make sure whether the correct Modem script has been specified for a particular event.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer bundle ● 5 dialer bundle Purpose Use the dialer bundle command to configure a dialer bundle used by a dialer interface. Use the undo dialer bundle command to disassociate the dialer bundle from the dialer interface. Syntax dialer bundle number undo dialer bundle Parameters number Default By default, the Resource-Shared DCC is not enabled, neither is dialer bundle specified.
6 ● dialer bundle-member 3Com Router 5000 Family and Router 6000 Family Command Reference dialer bundle-member Purpose Use the dialer bundle-member command to configure a physical interface included in a dialer bundle in the Resource-Shared DCC application. Use the undo dialer bundle-member command to remove the physical interface from the dialer bundle.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer callback-center ● 7 dialer callback-center Purpose Use the dialer callback-center command to enable the callback server function. Use the undo dialer callback-center command to disable the callback server function of a router. Syntax dialer callback-center [ user ] [ dial-number ] undo dialer callback-center Parameters user Calls back according to the parameter user hostname configured in the dialer route command.
8 ● dialer call-in 3Com Router 5000 Family and Router 6000 Family Command Reference dialer call-in Purpose Use the dialer call-in command to enable ISDN callback according to ISDN caller ID. Use the undo dialer call-in command to cancel the configuration. Syntax dialer call-in remote-number [ callback ] undo dialer call-in remote-number [ callback ] Parameters remote-number Used for matching the remote incoming call number. The character “*” represents any character.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer circular-group ● 9 dialer circular-group Purpose Use the dialer circular-group command to add the physical interface to a dialer circular group specified here. Use the undo dialer circular-group command to cancel the configuration. Syntax dialer circular-group number undo dialer circular-group Parameters number Default By default, the physical interface is not a member of any dialer circular group.
10 ● dialer disconnect 3Com Router 5000 Family and Router 6000 Family Command Reference dialer disconnect Purpose Use the dialer disconnect command to clear the dial-up link or the session link on the specified interface at the PPPoE/PPPoA client. Syntax dialer disconnect interface [ interface-type interface-number ] Parameters interface-type Specifies an interface together with interface-number. interface-number Specifies an interface together with interface-type.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer enable-circular ● 11 dialer enable-circular Purpose Use the dialer enable-circular command to enable Circular DCC. Use the undo dialer enable-circular command to disable Circular DCC. Syntax dialer enable-circular undo dialer enable-circular Parameters None Default By default, Circular DCC is enabled on the ISDN interfaces and disabled on other interfaces. Example Enable Circular DCC on Serial 0/0/0.
12 ● dialer group 3Com Router 5000 Family and Router 6000 Family Command Reference dialer group Purpose Use the dialer-group command to configure access control on the packets transmitted on a DCC interface and to place the interface in an access control group. Use the undo dialer-group command to cancel the interface from united with the access control group. Syntax dialer-group group-number undo dialer-group Parameters group-number Default By default, this command is not configured.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer isdn-leased ● 13 dialer isdn-leased Purpose Use the dialer isdn-leased command to configure an ISDN B channel (can be either the channel on a BRI or PRI interface) to be the leased line. Use the undo dialer isdn-leased command to cancel the setting. Syntax dialer isdn-leased number undo dialer isdn-leased number Parameters number Default By default, no ISDN B channel is configured to be leased line.
14 ● dialer number 3Com Router 5000 Family and Router 6000 Family Command Reference dialer number Purpose Use the dialer number command to configure a dial number for placing a call to a single remote end. Use the undo dialer number command to cancel the configured dial number. Syntax dialer number dial-number undo dialer number Parameters dial-number Default By default, no dial number is set for calling the remote end. Example Set the dialer number for dialer1 calling the remote end to “11111”.
3Com Router 5000 Family and Router 6000 Family Command Reference ■ Related Command dialer number ● 15 When using Resource-Shared DCC, the same dialer number can be configured on different dialer interfaces at the calling side; but it is not the case at the called side; otherwise, the call will fail. When using Circular DCC, the same dialer number can be configured on different dialer interfaces at the calling side, and it is the same to the called side.
16 ● dialer priority 3Com Router 5000 Family and Router 6000 Family Command Reference dialer priority Purpose Use the dialer priority command to configure a priority for a physical interface in a dialer circular group in the Circular DCC configuration. Use the undo dialer priority command to restore the default priority. Syntax dialer priority priority undo dialer priority Parameters priority Example Set the priority of Serial 3/0/0 in dialer circular group0 to 5.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer queue-length ● 17 dialer queue-length Purpose Use the dialer queue-length command to configure the number of packets which comply with the "permit" statement that can be buffered before a link is set up. Use the undo dialer queue-length command to restore the default number of the packets that can be buffered.
18 ● dialer route 3Com Router 5000 Family and Router 6000 Family Command Reference dialer route Purpose Use the dialer route command to allow a DCC interface to call the specified destination address (host or network address) or to receive calls from multiple remote ends. Use the undo dialer route command to remove a dialer route.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer route ● 19 Default By default, no dialer route is defined. Example Dial 888066 to set up link for the packets destined to network segment 192.168.1.0/24. [3Com ] dialer route ip 192.168.1.0 mask 24 888066 Dial 888066 to set up link for the packets destined to host address 192.168.1.1 (not recommended). [3Com ] dialer route ip 192.168.1.
20 ● dialer-rule 3Com Router 5000 Family and Router 6000 Family Command Reference dialer-rule Purpose Use the dialer-rule command to configure the conditions of the data packet that can trigger a DCC call. Use the undo dialer-rule command to cancel the setting.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command dialer-group dialer-rule ● 21
22 ● dialer threshold 3Com Router 5000 Family and Router 6000 Family Command Reference dialer threshold Purpose Use the dialer threshold command to configure the traffic threshold of a link on the DCC interface so that another link can be enabled to call the same destination address when the ratio of traffic on all connected links on the DCC interface to the available bandwidth exceeds the preset percentage. Use the undo dialer threshold command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer threshold ● 23 timeout. Simply put, the dialer threshold 0 command voids the dialer timer idle command.
24 ● dialer timer autodial 3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer autodial Purpose Use the dialer timer autodial command to configure the automatic dialing interval of DCC. Use the undo dialer timer autodial command to resume the default interval. Syntax dialer timer autodial seconds undo dialer timer autodial Parameters seconds Example Set the DCC automatic calling interval on Serial0/0/0 to 60 seconds. Interval before the next call attempt (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer compete ● 25 dialer timer compete Purpose Use the dialer timer compete command to configure an idle interval for an interface after call contention occurs on the interface. Use the undo dialer timer compete command to restore the default interval.
26 ● dialer timer enable 3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer enable Purpose Use the dialer timer enable command to configure an interval for the next call attempt on an interface after the link is disconnected. Use the undo dialer timer enable command to restore the default interval. Syntax dialer timer enable seconds undo dialer timer enable Parameters seconds Example Set the interval for DCC to make the next call attempt to 15 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer idle ● 27 dialer timer idle Purpose Use the dialer timer idle command to configure the interval that a link is allowed to be idle (in other words, the interval when there is no packets which comply with the “permit” statements transmitted) after a call has been set up on the interface. Use the undo dialer timer idle command to restore the default duration.
28 ● dialer timer wait-carrier 3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer wait-carrier Purpose Use the dialer timer wait-carrier command to configure the timeout time of wait-carrier timer. Use the undo dialer timer wait-carrier command to restore the default time of the timer.
3Com Router 5000 Family and Router 6000 Family Command Reference dialer timer warmup ● 29 dialer timer warmup Purpose Use the dialer timer warmup command to set the length of the warmup timer on the router configured with the dial-up backup function. It is the time that the router must wait for bringing the dial-up backup function into effect after a reboot. Use the dialer timer warmup command to restore the default.
30 ● dialer user 3Com Router 5000 Family and Router 6000 Family Command Reference dialer user Purpose Use the dialer user command to configure remote user name for authenticating requests when calls are received. Use the undo dialer user command to cancel the remote user name. Syntax dialer user username undo dialer user Parameters username Default By default, no remote user name is set. Example Set the remote username to “RouterB”.
3Com Router 5000 Family and Router 6000 Family Command Reference display dialer ● 31 display dialer Purpose Use the display dialer command to view information on DCC interfaces. Syntax display dialer [ interface interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Default By default, information on all DCC interfaces is displayed. Example Display information on dialer interfaces.
32 ● display dialer 3Com Router 5000 Family and Router 6000 Family Command Reference ■ dialer timer enable
3Com Router 5000 Family and Router 6000 Family Command Reference flow interval ● 33 flow interval Purpose Use the flow-interval command to configure traffic statistic interval. Use the undo flow-interval command to restore the default traffic statistic interval. This command takes effect only on DCC packet-triggered dial-up. Syntax flow-interval interval undo flow-interval Parameters interval Example Set the traffic statistic interval to 3 seconds. Traffic statistic interval (in seconds).
34 ● interface dialer 3Com Router 5000 Family and Router 6000 Family Command Reference interface dialer Purpose Use the interface dialer command to create a dialer circular group for the Circular DCC, or configure a dialer interface for the Resource-Shared DCC. Use the undo interface dialer command to cancel the existing setting. Syntax interface dialer number undo interface dialer number Parameters number Default By default, no dialer interface is defined.
3Com Router 5000 Family and Router 6000 Family Command Reference modem ● 35 modem Purpose Use the modem command to enable modem call-in and call-out on the interface. Use the undo modem and undo modem both command to disable modem call-in and call-out. Use the undo modem [ call-in | call-out ] command to disable modem call-in or call-out. Syntax modem [ both | call-in | call-out ] undo modem [ both | call-in | call-out ] Parameters both Permits both modem call-in and modem call-out.
36 ● modem auto-answer 3Com Router 5000 Family and Router 6000 Family Command Reference modem auto-answer Purpose Use the modem auto-answer command to have the external modem connected to the asynchronous interface automatically answer or hook off. Use the undo modem auto-answer command to disable the connected external modem to answer automatically. In this case, the modem answers only when receiving an AT instruction sent by software.
3Com Router 5000 Family and Router 6000 Family Command Reference ppp callback ● 37 ppp callback Purpose Use the ppp callback command to enable an interface to send or accept PPP callback requests. Use the undo ppp callback command to disable the interface to send or accept PPP callback requests. Syntax ppp callback { client | server } undo ppp callback { client | server } Parameters client As the client end, sends callback requests. server As the server end, accepts callback requests.
38 ● ppp callback ntstring 3Com Router 5000 Family and Router 6000 Family Command Reference ppp callback ntstring Purpose Use the ppp callback ntstring command to configure the dial number required for a Windows NT server to call back the router. Use the undo ppp callback ntstring command to cancel the configured callback dial number.
3Com Router 5000 Family and Router 6000 Family Command Reference service modem-callback ● 39 service modem-callback Purpose Use the service modem-callback command to enable the callback function of modems. Use the undo service modem-callback command to disable the callback function of modems. Syntax service modem-callback undo service modem-callback Parameters None Example Enable the callback function.
40 ● script-string 3Com Router 5000 Family and Router 6000 Family Command Reference script-string Purpose Use the script-string command to configure a Modem script. Use the undo script-string command to cancel the Modem script. Syntax script-string script-name script-content undo script-string script-name Parameters script-name Name of Modem script. script-content Script content. Default By default, the system does not have a Modem script. Example Define a Modem script.
3Com Router 5000 Family and Router 6000 Family Command Reference script-string ● 41 to the Modem and expect to receive receive-string1. If the string matching receive-string1 is received before timeout, the execution of the subsequent script, which will be otherwise terminated, will continue. ■ If the last string is a sending string, it indicates that the execution of the script will be terminated after the string is sent without waiting for any receiving string.
42 ● script-string 3Com Router 5000 Family and Router 6000 Family Command Reference Table 3 script escape characters Related Commands Escape characters Description \c It means that only the specified string can be sent and the character "Enter" will not be sent. The character of "\c" must be at the end of the sending strings. Otherwise, it is invalid at other location. \d Represents pausing 2 seconds. \n Represents the character "newline". \r Represents the character "Enter".
3Com Router 5000 Family and Router 6000 Family Command Reference script trigger connect ● 43 script trigger connect Purpose Use the script trigger connect command to configure the Modem script that will be executed once an incoming call connection is established. Use the undo script trigger connect command to cancel this feature. Syntax script trigger connect script-name undo script trigger connect Parameters script-name Default By default, no Modem script is configured.
44 ● script trigger dial 3Com Router 5000 Family and Router 6000 Family Command Reference script trigger dial Purpose Use the script trigger dial command to configure the Modem script that is used for DCC dialing. Use the undo script trigger dial command to cancel the feature. Syntax script trigger dial script-name undo script trigger dial Parameters script-name Default By default, the system does not specify the script. Example Specify the script “example” to be used for DCC dialing.
3Com Router 5000 Family and Router 6000 Family Command Reference script trigger init ● 45 script trigger init Purpose Use the script trigger init command to configure the Modem script that will be executed when the system is powered on or rebooted. Use the undo script trigger init command to cancel this feature. Syntax script trigger init script-name undo script trigger init Parameters script-name Default By default, the system does not specify the script.
46 ● script trigger login 3Com Router 5000 Family and Router 6000 Family Command Reference script trigger login Purpose Use the script trigger login command to configure the Modem script that will be executed when an outgoing call connection is successfully established. Use the undo script trigger login command to cancel this feature. Syntax script trigger login script-name undo script trigger login Parameters script-name Default By default, no Modem script is configured.
3Com Router 5000 Family and Router 6000 Family Command Reference script trigger logout ● 47 script trigger logout Purpose Use the script trigger logout command to configure the Modem script that is executed when a link is reset. Use the undo script trigger logout command to cancel this feature. Syntax script trigger logout script-name undo script trigger logout Parameters script-name Default By default, no Modem script is configured.
48 ● standby routing-group 3Com Router 5000 Family and Router 6000 Family Command Reference standby routing-group Purpose Use the standby routing-group command to apply a dynamic routing standby group on the secondary interface. Use the undo standby routing-group command to remove the dynamic routing standby group from the dialer interface.
3Com Router 5000 Family and Router 6000 Family Command Reference standby routing-rule ● 49 standby routing-rule Purpose Use the standby routing-rule command to create a dynamic routing standby group and assign a monitored network segment to it. Use the undo standby routing-rule command to delete a monitored network segment from the specified dynamic routing standby group or to delete the dynamic routing standby group.
50 ● standby timer routing-disable 3Com Router 5000 Family and Router 6000 Family Command Reference standby timer routing-disable Purpose Use the standby timer routing-disable command to specify a delay for the secondary link to be disconnected after the primary link goes up to avoid route oscillation. Use the undo standby timer routing-disable command to restore the default delay, that is, 0.
3Com Router 5000 Family and Router 6000 Family Command Reference start script ● 51 start script Purpose Use the start-script command to configure executing the specified Modem script on an interface. Syntax start-script script-name number Parameters script-name Name of Modem script. number Interface number of the script. Example Execute the specified Modem script “example” on the interface 1.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 VOIP ALPHABETICAL LISTING OF COMMANDS aaa-client 7 address 8 address 10 address sip 11 ani 12 ani-offset 13 answer 14 area 15 area-id (Voice Entity view) 16 area-id (Voice GK Client view) 17 authentication 18 authentication-did 19 authorization-level 20 busytone-t-th 21 callednumber receive-method 22 caller-permit 23 call-mode 25 card-digit 26 cas 27 cdr 28 cid display 30 cid enable 31 cid select-mode 32 cid send 33 cid type 34 clear-for
2● 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vcc 58 debugging voice vmib 60 debugging voice vofr 61 debugging voice vpp 62 debugging voice vpp r2 63 default 64 default entity compression 67 default entity fax 68 default entity payload-size 71 default entity vad-on 72 delay 73 delay 75 delay-reversal 76 description (in Voice Entity View) 77 description (in Voice Subscriber-Line View) 78 dial-prefix 79 dial-program 81 display aaa unsent-h323-call-record 82 display fr v
3Com Router 5000 Family and Router 6000 Family Command Reference echo-canceller 146 effect-time 148 em-phy-parm 149 em-signal 150 entity 152 fax baudrate 153 fast-connect 155 fax ecm 156 fax level 157 fax local-train threshold 158 fax nsf-on 159 fax protocol 160 fax support-mode 162 fax train-mode 163 final-callednum 164 first-rule 165 force-metering 166 fxo-monitoring 167 group-b 168 gk-client 169 gk-id 170 gk-2nd-id 171 gk-security call 172 gk-security register-pwd 173 gw-access-number 174 gw-address 176
4● 3Com Router 5000 Family and Router 6000 Family Command Reference pri-set 209 priority 211 priority 212 private-line 213 process-config 214 ras-on 216 re-answer 217 receive gain 218 redialtimes 219 register-enable 220 register-number 221 register-value 222 renew 225 reset voice call-history-record line 226 reset voice em 227 reset voice fax 228 reset voice fax trans-statistics 229 reset voice ipp 230 reset voice r2 231 reset voice rcv 232 reset voice sip 233 reset voice vcc 234 reset voice voip data-sta
3Com Router 5000 Family and Router 6000 Family Command Reference special-character 269 special-service 270 subscriber-line 271 subscriber-line 272 substitute 274 substitute incoming-call 276 substitute outgoing-call 278 terminator 280 timer-dial-interval 281 timer (Digital E&M) 282 timer dl (R2) 283 timer dtmf (R2) 285 timer first-dial 286 timer register-complete (R2) 287 timer register-pulse (R2) 288 timer ring (R2) 289 timer ring-back 290 timer wait-digit 291 timeslot-set 292 timestamp 294 trace interval
6● 3Com Router 5000 Family and Router 6000 Family Command Reference
3Com Router 5000 Family and Router 6000 Family Command Reference aaa-client Purpose Use the aaa-client command to enter Voice AAA view. Use the quit command to exit this view. Syntax aaa-client Parameters None Example Enter Voice AAA view.
8 ● address 3Com Router 5000 Family and Router 6000 Family Command Reference address Purpose Use the address command to configure a route to the peer voice gateway or assign an X.121 address for a destination host. Use the undo address command to cancel the setting. Syntax address { vofr-dynamic serial interface-number dlci-number | x121 x121-address } undo address { vofr-dynamic [ x121 } Parameters vofr-dynamic serial interface-number Session target interface of a VoFR voice entity.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ match-template ■ call-mode ■ vofr address ● 9
10 ● address 3Com Router 5000 Family and Router 6000 Family Command Reference address Purpose Use the address command to configure the voice routing policy to the peer voice gateway. Use the undo address command to cancel the voice routing policy that has been configured. Syntax address { ip ip-address | ras } undo address { ip | ras } Parameters ip ip-address Indicates a VoIP dial entity session destination, that is, the called IP address.
3Com Router 5000 Family and Router 6000 Family Command Reference address sip ● 11 address sip Purpose Use the address sip command to set routing policy for reaching the remote voice gateway (VG) to SIP. Use the undo address command to restore the default. Syntax address sip { proxy | { ip ip-address port port-number } } undo address sip proxy | ip Parameters proxy Adopts SIP proxy server to complete SIP interaction. ip-address IPv4 address to which SIP packets of a call is destined.
12 ● ani 3Com Router 5000 Family and Router 6000 Family Command Reference ani Purpose Use the ani command to enable or disable the terminating point to send the calling party information (service category and calling number) to the originating point during call connecting process. Use the undo ani command to cancel the above configuration. Syntax ani { all | ka } undo ani Parameters all Requires the remote end to send the category of the calling party and calling number.
3Com Router 5000 Family and Router 6000 Family Command Reference ani-offset ● 13 ani-offset Purpose Use the ani-offset command to configure the number of digits of the called number to be collected prior to requesting the calling party information. Use the undo ani-offset command to restore the default value. Syntax ani-offset number undo ani-offset Parameters number Example Set to start requesting the caller number or caller identifier after receiving the 3-digit numbers.
14 ● answer 3Com Router 5000 Family and Router 6000 Family Command Reference answer Purpose Use the answer command to configure whether the terminating point is required to send answer signal. Syntax answer { enable | disable } Parameters enable The originating points requires that the terminating point must send answer signal. Only after the originating point receives the signal, can the peers enter the communicating state.
3Com Router 5000 Family and Router 6000 Family Command Reference area ● 15 area Purpose Use the area command to configure the type of busy tone detection for FXO voice subscriber-line. Use the undo area command to restore the default value. Syntax area { north-america | custom | europe } undo area Parameters north-america Busy tone type of the switch connected to this subscriber-line is of North America standard.
16 ● area-id (Voice Entity view) 3Com Router 5000 Family and Router 6000 Family Command Reference area-id (Voice Entity view) Purpose Use the area-id command to configure the area ID of voice GW. Use the undo area-id command to cancel the specified area ID. Syntax area-id string undo area-id Parameters string Default By default, no area ID of voice GW is configured. Example Configure the VoIP voice entity 101 with the area ID 6#. Area ID. Valid values are 0 to 9. The “#” can also be used.
3Com Router 5000 Family and Router 6000 Family Command Reference area-id (Voice GK Client view) ● 17 area-id (Voice GK Client view) Purpose Use the area-id command to configure the H.323 gateway area ID. Use the undo-area-id command to cancel a specified area ID. Syntax area-id string undo area-id Parameters string Default By default, no H.323 gateway area ID is configured. Example Configure the GK client with a area ID 6#. Indicate the area ID.
18 ● authentication 3Com Router 5000 Family and Router 6000 Family Command Reference authentication Purpose Use the authentication command to enable user authentication and authorization for the access service number. Use the undo authentication command to disable user authentication and authorization for the access service number. Syntax authentication undo authentication Parameters None Default By default, user authentication and authorization is disabled for all access service numbers.
3Com Router 5000 Family and Router 6000 Family Command Reference authentication-did ● 19 authentication-did Purpose Use the authentication-did command to enable authentication for all one-stage dial (direct dial) users. Use the undo authentication-did command to disable authentication for one-stage dial users. Syntax authentication-did undo authentication-did Parameters None Default By default, authentication is disabled for one-stage dial users.
20 ● authorization-level 3Com Router 5000 Family and Router 6000 Family Command Reference authorization-level Purpose Use the authorization-level command to configure a local caller authorization level for the voice entity. Use the undo authorization-level command to restore the default local caller authorization level of the voice entity. Syntax authorization-level level undo authorization-level Parameters level Example Set the local caller authorization level to 2 for voice entity 10.
3Com Router 5000 Family and Router 6000 Family Command Reference busytone-t-th ● 21 busytone-t-th Purpose Use the busytone-t-th command to configure the threshold of busy tone detection. Use the undo busytone-t-th command to restore the default. Syntax busytone-t-th time-threshold undo busytone-t-th Parameters time-threshold Example Set the threshold of busy tone detection to 3. Threshold of busy tone detection. Valid values are 2 to 12, with a bigger value meaning longer detection time.
22 ● callednumber receive-method 3Com Router 5000 Family and Router 6000 Family Command Reference callednumber receive-method Purpose Use the callednumber receive-method command to enable the device to place a call immediately after all digits of the called number are collected or after a pound sign (#), the terminator, is received. Use the undo callednumber receive-method command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference caller-permit ● 23 caller-permit Purpose Use the caller-permit command to configure the calling numbers that are permitted to call in. Use the undo caller-permit command to delete the calling numbers that are permitted to call in. Syntax caller-permit calling-string undo caller-permit { calling-string | all } Parameters all All callers.
24 ● caller-permit 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Meanings of the character string (continued) Character Meaning () A group of characters. For example, (123A) means a string “123A”. It is usually used with “!”, “%”, and “+”. For example, “408(12)+” can match 40812 or 408121212. But it cannot match 408. That is, “12” can appear continuously and it must at least appear once.
3Com Router 5000 Family and Router 6000 Family Command Reference call-mode ● 25 call-mode Purpose Use the call-mode command to configure a call-mode for calls between local router and peer router. Use the undo call-mode command to restore the default value. Syntax call-mode { static | dynamic } undo call-mode [ static | dynamic ] Parameters static FRF.11 trunk mode is adopted. dynamic Dynamic calling is adopted. Default By default, the dynamic mode is adopted.
26 ● card-digit 3Com Router 5000 Family and Router 6000 Family Command Reference card-digit Purpose Use the card-digit command to configure the number of digits in a card number for an access service number. Syntax card-digit card-digit Parameters card-digit Example Set the user card number in 10 digits for the access service number 18901. The card digits. Valid values are 1 to 31. If no value is specified, the default user card number is 12 digits.
3Com Router 5000 Family and Router 6000 Family Command Reference cas ● 27 cas Purpose Use the cas command to enter the R2 CAS view and digital E&M sigaling view. Syntax cas ts-set-number Parameters ts-set-number Example Enter the R2 CAS view of No.5 Timeslot set. The serial number of the Timeslot set predefined. Valid values are 0 to 30.
28 ● cdr 3Com Router 5000 Family and Router 6000 Family Command Reference cdr Purpose Use the cdr command to configure the saving rule for call detail record. Use the undo cdr command to restore the default saving rule. Syntax cdr { buffer [ size-number ] | duration [ timer-number ] | threshold { threshold | default } } undo cdr Parameters Example buffer Save the call records by setting the upper limit of the number of records. size-number Number of the saved call detail records.
3Com Router 5000 Family and Router 6000 Family Command Reference Description cdr ● 29 This command is used to set the saving rule for call detail records. The system will save certain amount of call detail record information according to the rule set by the user. In VRP (Versatile Routing Platform), at most 500 call detail records can be saved.
30 ● cid display 3Com Router 5000 Family and Router 6000 Family Command Reference cid display Purpose Use the cid display command to enable caller identification display. Use the undo cid display command to disable caller identification display. Syntax cid display undo cid display Parameters None Default By default, caller identification display is enabled. Example Enable caller identification display on voice subscriber-line 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference cid enable ● 31 cid enable Purpose Use the cid enable command to enable CID on the FXO interface. Use the undo cid enable command to disable CID on the FXO interface. Syntax cid enable undo cid enable Parameters None Default By default, CID is enabled on the FXO interface. Example Enable CID on FXO voice subscriber-line 1/0/0.
32 ● cid select-mode 3Com Router 5000 Family and Router 6000 Family Command Reference cid select-mode Purpose Use the cid select-mode command to configure the route selection mode used by the calling party to set up VoFR calls. Use the undo cid select-mode command to restore the default. Syntax cid select-mode { max-poll | min-poll } undo cid select-mode Parameters max-poll Cyclically selects routes in descending order. min-poll Cyclically selects routes in ascending order.
3Com Router 5000 Family and Router 6000 Family Command Reference cid send ● 33 cid send Purpose Use the cid send command to enable the FXO or FXS module to send calling numbers to the IP side. Use the undo cid send command to disable the FXO or FXS module to send calling numbers to the IP side. Syntax cid send undo cid send Parameters None Default By default, calling numbers are sent to the IP side. Example Enable the FXO voice subscriber-line 3/0/0 to send calling numbers to the IP side.
34 ● cid type 3Com Router 5000 Family and Router 6000 Family Command Reference cid type Purpose Use the cid type command to configure the format of transmitted information about the calling party. Syntax cid type { complex | simple } Parameters complex Caller identification information is transmitted in multiple-data message format (MDMF). simple Caller identification information is transmitted in single-data message format (SDMF).
3Com Router 5000 Family and Router 6000 Family Command Reference clear-forward-ack ● 35 clear-forward-ack Purpose Use the clear-forward-ack command to enable or disable the terminating point to respond by sending a clear-back signal when the originating point (calling party) disconnects a call. Syntax clear-forward-ack { enable | disable } Parameters enable Enables the terminating point to acknowledge the clear-forward signal by sending a clear-back signal.
36 ● cng-on 3Com Router 5000 Family and Router 6000 Family Command Reference cng-on Purpose Use the cng-on command to enable comfort noise function. Use the undo cng-on command to disable the comfort noise function, Syntax cng-on undo cng-on Parameters None Default By default, comfort noise setting is enabled. Example Disable comfort noise function on subscriber line 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference cngced-detection ● 37 cngced-detection Purpose Use the cngced-detection command to set the threshold parameters for CNG/CED signal detection. Use the undo cngced-detection command to restore the default. Syntax cngced-detection threshold times undo cngced-detection Parameters Example threshold Calling tone/Called terminal identification (CNG/CED) detection threshold with fax. It is an integer in the range 0 to 30 and its default is 0.
38 ● compression 3Com Router 5000 Family and Router 6000 Family Command Reference compression Purpose Use the compression command to configure the voice coding method according to priority level. Use the undo compression command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference compression ● 39 Specifies G.726 Annex A coding. It uses ADPCM, requiring the bandwidth of 32 kbps. Specifies G.726 Annex A coding. It uses ADPCM, requiring the bandwidth of 40 kbps. g726r40 Default By default, g729r8 coding mode is set. Example Configure to select g723r53 compression method first, then to select the g729r8 compression method.
40 ● compression 3Com Router 5000 Family and Router 6000 Family Command Reference Actual network bandwidth is related to packet assembly interval and network structure. The longer the packet assembly interval is, the closer the network bandwidth is to the media stream bandwidth. More headers consume more bandwidth. Longer packet assembly interval results in longer fixed coding latency.
3Com Router 5000 Family and Router 6000 Family Command Reference compression ● 41 Packet assembly interval Bytes coded in a time unit Packet length IP Network Packet bandwidth length IP IP+PPP Network bandwidth Coding IP+PPP latency 20 ms 40 80 32 kbps 86 34.4 kbps 20 ms 30 ms 60 100 26.7 kbps 106 28.3 kbps 30 ms 40 ms 80 120 24 kbps 126 25.2 kbps 40 ms 50 ms 100 140 22.4 kbps 146 23.4 kbps 50 ms 60 ms 120 160 21.3 kbps 166 11.4 kbps 60 ms 70 ms 140 180 20.
42 ● compression 3Com Router 5000 Family and Router 6000 Family Command Reference ■ Bytes coded in a time unit = packet assembly interval X media stream bandwidth.
3Com Router 5000 Family and Router 6000 Family Command Reference cptone ● 43 cptone Purpose Use the cptone command to set the prompt tone played on the current voice subscriber-line to the specified country mode. Use the undo cptone command to restore the default, that is, CN. This command only applies to FXS and FXO voice subscriber-lines. Syntax cptone country [ voltage value ] undo cptone Parameters Sets the prompt tone played on the current voice subscriber-line to the specified country mode.
44 ● cptone 3Com Router 5000 Family and Router 6000 Family Command Reference Mode of prompt tone Country Example RU Russian Federation SA Saudi Arabia SE Sweden TH Thailand TR Turkey US United States Set the country mode of prompt tone to US.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice data-flow ● 45 debugging voice data-flow Purpose Use the debugging voice data-flow command to enable debugging for voice data processes. Use the undo debugging voice data-flow command to disable the debugging. Syntax debugging voice data-flow { all | verbose | error | fax | fax-error | jitter | jitter-error | receive | send | vpp } Parameters all Enable debugging on all voice data processes.
46 ● debugging voice dpl 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice dpl Purpose Use the debugging voice dpl command to enable the debugging of voice dial program. Use the undo debugging voice dpl command to disable the debugging. Syntax debugging voice dpl { all | error | general } Parameters all Enable all debugging of voice dial program. error Enable error debugging of voice dial program. general Enable general debugging of voice dial program.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice fax ● 47 debugging voice fax Purpose Use the debugging voice fax command to enable fax debugging. Syntax debugging voice fax { all | api | cc | channel [ channel-no ] | nonstandard-compatible | controller | error-all | ipp | t38 } Parameters all Enables all fax debugging. api Enables API function debugging of fax. cc Enables main task debugging of fax.
48 ● debugging voice h225 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice h225 Purpose Use the debugging voice h225 command to enable debugging for the H.225.0 negotiation messages or events. Use the undo debugging voice h225 command to disable the debugging. Syntax debugging voice h225 { asn1 | event } Parameters asn1 Information related to negotiation messages is output. event Information related to negotiation events is output. Example Enable H.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice h245 ● 49 debugging voice h245 Purpose Use the debugging voice h245 command to enable debugging for the H.245 negotiation messages or events. Use the undo debugging voice h245 command to disable the debugging. Syntax debugging voice h245 | event Parameters event Example Enable H.245 negotiation events debugging. Information related to negotiation events is output.
50 ● debugging voice ipp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice ipp Purpose Use the debugging voice ipp command to enable H.323 recommendation suite module debugging. Use the undo debugging voice ipp command to disable this debugging. Syntax debugging voice ipp { all | error | rtp-rtcp | socket | vcc | vpp | x691 } Parameters all Enable all debugging for IPP module. error Enable error debugging for IPP module.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice r2 ● 51 debugging voice r2 Purpose Use the debugging voice r2 command to enable the corresponding debugging in R2 signaling module. Use the debugging voice r2 ccb command to view the information of the corresponding control block by specifying the E1 port number and time slot number. This command applies to E1 voice only.
52 ● debugging voice ras 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice ras Purpose Use the debugging voice ras command to enable the debugging information output switch of RAS messages interacted between GK Client and GK Server. Syntax debugging voice ras event Parameters event Example Enable the debugging information output switch of RAS messages interacted between GK Client and GK Server. Output interacted RAS message record.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice rcv ● 53 debugging voice rcv Purpose Use the debugging voice rcv command to enable the debugging of the RCV module. Use the undo debugging voice rcv command to disable the debugging. Syntax debugging voice rcv { all | cc | error | r2 | timer | vas | vcc | vpp } Parameters all Enable all the debugging of the RCV module. cc Enable the debugging between the RCV module and the underlying CC module.
54 ● debugging voice rcv r2 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice rcv r2 Purpose Use the debugging voice rcv r2 command to enable the debugging between the RCV module and the R2 module of bottom layer. This command applies to E1 voice only. Syntax debugging voice rcv r2 Parameters r2 Example None View This command can be used in the following views: ■ Enable the debugging between the RCV module and the R2 module of bottom layer.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice sip ● 55 debugging voice sip Purpose Use the debugging voice sip command to enable SIP debugging. Use the undo debugging voice sip command to disable SIP debugging. Syntax debugging voice sip { all | calls | error | message { all | call | register } | register | warning } undo debugging voice sip { all | calls | error | message | register | warning } Parameters Example all Enables all SIP debugging.
56 ● debugging voice vas 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vas Purpose Use the debugging voice vas command to enable the VAS module debugging. Use the undo debugging voice vas command to disable the debugging. Syntax debugging voice vas { all | buffer | cid | command | dsp | em | error | fax | line | rcv | receive | send } Parameters all Enable all the debugging of the VAS module.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vas fax ● 57 debugging voice vas fax Purpose Use the debugging voice vas fax command to enable the debugging of fax data access between the VAS module and voice card. Syntax debugging voice vas fax Parameters None Example Enable the debugging of fax data access between the VAS module and voice card.
58 ● debugging voice vcc 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vcc Purpose Use the debugging voice vcc command to enable the debugging at various levels of the VCC module. This command is used to enable the debugging of the VCC module, and to specify the levels and types of the debugging. Syntax debugging voice vcc { all | error | ipp | proc | rcv | timer | vpp | line line-number } Parameters all Enable all debugging of the VCC module.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command debugging voice vcc ● 59 ■ No character other than figures can appear in the specified line number, If any character other than figures appears in the entered line-number, this enter is invalid. ■ The specified line number cannot be greater than the number of the actual subscriber lines. If the specified line-number is greater than the number of the actual subscriber lines, this enter is invalid.
60 ● debugging voice vmib 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vmib Purpose Use the debugging voice vmib command to enable the voice MIB module debugging. Use the undo debugging voice vmib command to disable the debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vofr ● 61 debugging voice vofr Purpose Use the debugging voice vofr command to enable VoFR module debugging. Syntax debugging voice vofr { all | error | fax | intf | motorola | nonstandard | timer | vcc | vofr | vpp } Parameters all Enables all VoFR module debugging. error Enables debugging of VoFR module errors resulting in connection failures. fax Enables debugging of information between the VoFR and Fax modules.
62 ● debugging voice vpp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vpp Purpose Use the debugging voice vpp command to enable the debugging of the VPP module. Use the undo debugging voice vpp command. you can disable the debugging switch. Syntax debugging voice vpp { all | codecm | error | ipp | r2 | rcv | timer | vas | vcc } Parameters all Enable all the debugging of the VPP module.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging voice vpp r2 ● 63 debugging voice vpp r2 Purpose Use the debugging voice vpp r2 command to enable the debugging between the VPP module and the R2 module of bottom layer. This command applies to E1 voice only. Syntax debugging voice vpp r2 Parameters r2 Example None View This command can be used in the following views: ■ Enable the debugging between the VPP module and the R2 module of bottom layer.
64 ● default 3Com Router 5000 Family and Router 6000 Family Command Reference default Purpose Use the default command to restore the default of all the R2 configurations and reset the R2 call statistics to 0. Syntax default Parameters None Example Restore the default of all the configurations on CAS 1/0/0:5.
3Com Router 5000 Family and Router 6000 Family Command Reference default ● 65 Table 1 Configuration items affected by the default command Configuration item Default The ABCD bit pattern that represents a seized receive line 0001 The ABCD bit pattern that represents a seized transmit line 0001 The ABCD bit pattern that represents the seizure acknowledged state of the transmit line. 1101 The ABCD bit pattern 1101 that represents the seizure acknowledged state of the receive line.
66 ● default Description 3Com Router 5000 Family and Router 6000 Family Command Reference The following table gives the configuration items affected by this command.
3Com Router 5000 Family and Router 6000 Family Command Reference default entity compression ● 67 default entity compression Purpose Use the default entity compression command to globally configure the mode of coding and decoding as the default value. Use the undo default entity compression command to restore the fixed value (i.e. g729r8 code mode) in the system as the default value.
68 ● default entity fax 3Com Router 5000 Family and Router 6000 Family Command Reference default entity fax Purpose Use the default entity fax command to set the default fax parameter settings globally. Use the undo default entity fax command to restore the system-default default settings.
3Com Router 5000 Family and Router 6000 Family Command Reference default entity fax ● 69 Sets the fax speed to the allowed maximum voice speed. ecm Enables fax error correction mode. It is disabled by default. level level The level of the fax transmission signal. It defaults to 15. local-train Specifies the threshold of fax local training. ■ threshold value Specifies the threshold of fax local training. It defaults to 10. nsf-on Enables NSF message transmission. It is disabled by default.
70 ● default entity fax 3Com Router 5000 Family and Router 6000 Family Command Reference Adopts VT fax mode. train-mode Specifies the fax training mode. It defaults to end to end mode or PPP. ■ local Adopts local training. ■ ppp Adopts end to end training. Example Set the maximum global fax speed to 9600 bps. [Router-voice-dial] default entity fax baudrate 9600 Configure the fax energy level to 20 globally.
3Com Router 5000 Family and Router 6000 Family Command Reference default entity payload-size ● 71 default entity payload-size Purpose Use the default entity payload-size command to configure the default time length of voice packets with different coding formats. Use the undo default entity payload-size command to restore the default.
72 ● default entity vad-on 3Com Router 5000 Family and Router 6000 Family Command Reference default entity vad-on Purpose Use the default entity vad-on command to globally configure enabling silence detection as the default value. Use the undo default entity vad-on command to restore the fixed value (i.e. disabling the silence detection) to be the default value. Syntax default entity vad-on undo default entity vad-on Parameters None Default By default, the silence detection is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference delay ● 73 delay Purpose Use the delay command to configure the related time parameters at the digital E&M subscriber-line (E1 controller). Use the undo delay command to restore these parameters to the default value.
74 ● delay Example 3Com Router 5000 Family and Router 6000 Family Command Reference Set the longest delay-waiting duration to 3000 milliseconds on voice subscriber line 1/0/1:3.
3Com Router 5000 Family and Router 6000 Family Command Reference delay ● 75 delay Purpose Use the delay command to configure the relevant time parameters on an FXO or analog E&M subscriber-line. Use the undo delay command to restore the default values of these time parameters.
76 ● delay-reversal 3Com Router 5000 Family and Router 6000 Family Command Reference delay-reversal Purpose Use the delay-reversal command to configure the timer’s interval of polarity-reverse transmission delay on FXS interfaces. Use the undo delay-reversal command to remove the function of polarity-reverse transmission delay.
3Com Router 5000 Family and Router 6000 Family Command Reference description (in Voice Entity View) ● 77 description (in Voice Entity View) Purpose Use the description command to configure a voice entity description string. Use the undo description command to delete the voice entity description string. Syntax description string undo description Parameters string Example Identify voice entity 10 with local-entity 10. Voice entity description string, with length ranging from 1 to 64 characters.
78 ● description (in Voice Subscriber-Line View) 3Com Router 5000 Family and Router 6000 Family Command Reference description (in Voice Subscriber-Line View) Purpose Use the description command to configure a subscriber-line description character string. Use the undo description command to cancel the subscriber-line description of character string. Syntax description string undo description Parameters string Example Identify subscriber line 1/0/0 as connected to lab_1.
3Com Router 5000 Family and Router 6000 Family Command Reference dial-prefix ● 79 dial-prefix Purpose Use the dial-prefix command to configure the prefix of the telephone number dialed by the voice entity. Use the undo dial-prefix command to cancel the prefix of the telephone number dialed by the voice entity. Syntax dial-prefix string undo dial-prefix Parameters Prefix code, a number of fixed length.
80 ● dial-prefix 3Com Router 5000 Family and Router 6000 Family Command Reference If the number with the added prefix contains more than 31 digits, only the first 31 characters will be sent.
3Com Router 5000 Family and Router 6000 Family Command Reference dial-program ● 81 dial-program Purpose Use the dial-program command to enter the voice dial program view. Use the quit command to return to the voice view. Syntax dial-program Parameters None Example Enter the dial program view.
82 ● display aaa unsent-h323-call-record 3Com Router 5000 Family and Router 6000 Family Command Reference display aaa unsent-h323-call-record Purpose Use the display aaa unsent-h323-call-record command to view the detail record information about the calls failed to be sent. This command is used to display the history records of the calls that are not established at the VoIP side because RADIUS Server has not returned the response to the accounting start message.
3Com Router 5000 Family and Router 6000 Family Command Reference Description display aaa unsent-h323-call-record ● 83 If the mode for RADIUS Client (i.e. the router system) to process the accounting request/responding packets is set as start-ack, for a call, once RADIUS Server does not return the response to an accounting request message within the specified time, VoIP of this call cannot be established.
84 ● display fr vofr-info 3Com Router 5000 Family and Router 6000 Family Command Reference display fr vofr-info Purpose Use the display fr vofr-info command to view the VoFR information. Syntax display fr vofr-info [ serial interface-number [ dlci-number ] ] Parameters serial interface-number Interface needs to be displayed. dlci-number Number of the DLCI that needs to be displayed, in the range 16 to 1007.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice aaa-client configuration ● 85 display voice aaa-client configuration Purpose Use the display voice aaa-client configuration command to view information about voice AAA. Syntax display voice aaa-client configuration Parameters None Example Display information about voice AAA.
86 ● display voice call-history-record 3Com Router 5000 Family and Router 6000 Family Command Reference display voice call-history-record Purpose Use the display voice call-history-record command to view call history. Syntax display voice call-history-record { callednumber number | callingnumber number | cardnumber number | last number | line number | remote-ip-addr ip-address } [ brief ] Parameters callednumber number Displays the call history of the specified called number.
3Com Router 5000 Family and Router 6000 Family Command Reference View display voice call-history-record ● 87 This command can be used in the following views: ■ Any view. Description The specified called number cannot be greater than the actual voice subscriber-line number; otherwise, the input is invalid.
88 ● display voice call-history-record 3Com Router 5000 Family and Router 6000 Family Command Reference display voice call-history-record Purpose Use the display voice call-history-record command to view the information about call history records. Syntax display voice call-history-record { callednumber called-number | callingnumber calling-number | cardnumber card-number | remote-ip-addr a.b.c.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice call-history-record ● 89 CalledNum EncodeType PeerAddress DisconnectCause DisconnectText TalkingTimes VoiceTimes FaxTimes ImgPages CallDirection SetupTime(voip) ConnectTime(voip) DisconectTime(voip) Transmit (voip) Received(voip) SetupTime(pstn) ConnectTime(pstn) DisconectTime(pstn) Transmit (pstn) Received(pstn) = = = = = = = = = = = = = = = = = = = = 2000 711u 127.0.0.
90 ● display voice call-history-record Description 3Com Router 5000 Family and Router 6000 Family Command Reference If such parameters as callednumber, callingnumber, cardnumber, remote-ip-addr, last, line are not entered, all the saved call history records should be output by default. If it is specified that call history records are displayed according to the number of the latest conversation records (in “last” mode), the default number of records are 10.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice call-history-record ● 91
92 ● display voice call-info 3Com Router 5000 Family and Router 6000 Family Command Reference display voice call-info Purpose Use the display voice call-info command to view the call information table, including: channel number of the call, reference counter of all voice modules, module ID in use, list of the voice entities that can be selected by the current call, and the voice entity used by the current call.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display voice call-info ● 93
94 ● display voice default 3Com Router 5000 Family and Router 6000 Family Command Reference display voice default Purpose Use the display voice default command to view the current default values and the system-fixed default values for voice and fax. Syntax display voice default all Parameters None Example Display the current default values and the system-default default values.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice default ● 95 Field Description compression 2nd-level Voice coding mode of the second priority compression 3rd-level Voice coding mode of the third priority compression 4rd-level Voice coding mode of the fourth priority cancel-truncate Truncation of called number canceled vad-on Voice entity VAD fast connect Fast connection of the calling VoIP voice entity payload-size g711 Voice entity packet assembly interval (G
96 ● display voice em call-statistic 3Com Router 5000 Family and Router 6000 Family Command Reference display voice em call-statistic Purpose Use the display voice em call-statistic command to view the call statistics of the digital E&M subscriber-line. This command applies to E1 voice only. This command is used to display the statistics of the E&M signaling being placed in the state of idle, seizure ready, seizure confirmation, transmitting numbers, receiving numbers, conversation and clear ready.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice em call-statistic ● 97 Table 1 E&M call statistics field description Field Description EMCALLED_WAIT_SEND Number of messages processed in the called end waiting for seizure _OCCUPY status by E&M module EMCALLED_WAIT_RECE Number of messages processed in the called end waiting for IVE_NUMBER receiving phone number status by E&M module EMCALLED_RECEIVING_ Number of messages processed in the called end receiving phone NUMBER numb
98 ● display voice em ccb 3Com Router 5000 Family and Router 6000 Family Command Reference display voice em ccb Purpose Use the display voice em ccb command to view the information of call control block of the E&M subscriber-line. This command applies to E1 voice only. This command is used to display the call status, call-ID, start type, signal type, channel number, etc. Syntax display voice em ccb Parameters None Example Display the information of E&M signaling call control block.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display voice em ccb ● 99
100 ● display voice entity 3Com Router 5000 Family and Router 6000 Family Command Reference display voice entity Purpose Use the display voice entity command to view the configuration information of voice entities of different types. Syntax display voice entity { all | pots | voip |vofr| mark entity-tag } Parameters all All voice entities. pots All POTS voice entities. voip All VoIP voice entities. vofr All VoFR voice entities. mark Displays a voice entity.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice fax ● 101 display voice fax Purpose Use the display voice fax command to view the fax statistics in the fax module and the statistics in the fax transformation module as well. Syntax display voice fax { statistics | trans-statistics } Parameters statistics Displays the fax statistics of the fax module. trans-statistics Displays the statistics in the fax transformation module.
102 ● display voice fax 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Description on the transformation statistics Field Description V21Data_WithOutRedu ndance_Packets Number of packets sent from IP fax side to FR fax side without redundancy V.21 data V21Data_WithRedunda nce_Packets Number of packets sent from IP fax side to FR fax side with redundancy V.21 data T4Data_WithOutRedun dance_Packets Number of packets sent from IP fax side to FR fax side without redundancy T.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice gateway ● 103 display voice gateway Purpose Use the display voice gateway command to view the gateway registration state information to GK Server. This command is used to display the gateway registration information to GK Server and gateway alias name list etc. Syntax display voice gateway Parameters None Example Display the gateway registration state information to GK Server.
104 ● display voice ipp 3Com Router 5000 Family and Router 6000 Family Command Reference display voice ipp Purpose Use the display voice ipp command to view statistics about the IPP module. Syntax display voice ipp ccb [channel channel-number] display voice ipp statistic { all | h225 | h245 | ras | socket | timer | vcc | vpp } Parameters Example ccb Displays information about the call control block in the IPP module. Channel Displays information of a voice channel in the IPP module.
3Com Router 5000 Family and Router 6000 Family Command Reference Send_FacilityStartH245 Send_Error Recv_Setup Recv_CallProceeding Recv_Alerting Recv_Connect Recv_ReleaseComplete Recv_Progress Recv_FacilityTCSRequest Recv_FacilityTCSAck Recv_FacilityTCSReject Recv_FacilityOLCRequest Recv_FacilityOLCAck Recv_FacilityOLCReject Recv_FacilityMSDRequest Recv_FacilityMSDAck Recv_FacilityMSDReject Recv_FacilityCLCRequest Recv_FacilityCLCAck Recv_Unknow View display voice ipp ● 105 : : : : : : : : : : : : : : : :
106 ● display voice number-substitute 3Com Router 5000 Family and Router 6000 Family Command Reference display voice number-substitute Purpose Use the display voice number-substitute command to view the configuration information of number-substitute lists. It can display the information of a certain list and all the lists. Syntax display voice number-substitute [ list-tag ] Parameters list-tag Example Display all the configured number-substitute lists.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice r2 call-statistics ● 107 display voice r2 call-statistics Purpose Use the display voice r2 call-statistics command to view the R2 call statistics. This command applies to E1 voice only. Syntax display voice r2 call-statistics Parameters None Example Display the information of R2 signaling call statistics.
108 ● display voice r2 call-statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 R2 signaling call statistics field description View Field Description Call-in nullnum Routing failure times: number of failed incoming calls due to no corresponding route available for the called number to create connection.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice rcv ccb ● 109 display voice rcv ccb Purpose Use the display voice rcv ccb command to view the information related to the call control block in the RCV module. This command is used to display the information related to the incoming and outgoing call control block, the connection status of modules, the caller status, the caller numbers and the called numbers, etc.
110 ● display voice rcv ccb 3Com Router 5000 Family and Router 6000 Family Command Reference CallSignaling : 0x00000004 EncodeType : 0x00000009 E1Slot : 0xffffffff E1Port : 0xffffffff TimeSlot : 0xffffffff ChannelID : 0x00000000 VpuState : VS_CONNECTED IppTimer : 0x00000000 CcTimer : 0x00000000 VpuTimer : 0x00000000 CcChanMsg : 0x00000000 E1ChanMsg : 0x00000000 CallerNumber : 111 CalledNumber : 660010 prev : 0x01409000 next : 0x00000000 } Table 1 Description on call control block in RCV module View Fiel
3Com Router 5000 Family and Router 6000 Family Command Reference display voice rcv statistic ● 111 display voice rcv statistic Purpose Use the display voice rcv statistic command to view the statistics information of calling between the RCV module and the CC module, VAS module, and so on. Syntax display voice rcv statistic { all | call | cc | error | ipp | proc | r2 | timer | vas | vcc | vpp } Parameters all Display all the statistics information of the RCV module.
112 ● display voice rcv statistic 3Com Router 5000 Family and Router 6000 Family Command Reference RCV_R2_ACTIVE_CALL_SUCCEEDED RCV_R2_ACTIVE_CALL_FAILED RCV_R2_PASSIVE_CALL RCV_R2_PASSIVE_CALL_SUCCEEDED RCV_R2_PASSIVE_CALL_FAILED RCV_VAS_ACTIVE_CALL RCV_VAS_ACTIVE_CALL_SUCCEEDED RCV_VAS_ACTIVE_CALL_FAILED RCV_VAS_PASSIVE_CALL RCV_VAS_PASSIVE_CALL_SUCCEEDED RCV_VAS_PASSIVE_CALL_FAILED } View 2 3 4 1 3 39 11 28 18 15 3 This command can be used in the following views: ■ Description : : : : : : : : : : :
3Com Router 5000 Family and Router 6000 Family Command Reference display voice rcv statistic r2 ● 113 display voice rcv statistic r2 Purpose Use the display voice rcv statistic r2 command to view the information of call statistics related to the R2 signaling in the RCV module. This command applies to E1 voice only.
114 ● display voice rcv statistic r2 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Field description of R2 signal call statistics in RCV module Field Description Send_R2_Offhook Number of sending offhook message to R2 module Send_R2_IPAlerting Number of sending IP side alerting message to R2 module Recv_R2_ConnectReq Number of receiving R2 connection request message Recv_R2_Active_TD_IN Number of receiving R2 called end hooking off message Recv_R2_Active_TD_OU Number o
3Com Router 5000 Family and Router 6000 Family Command Reference display voice sip call-statistics ● 115 display voice sip call-statistics Purpose Use the display voice sip call-statistics command to view all statistic information about the SIP client. Syntax display voice sip call-statistics Parameters None Example Display all statistic information about the SIP client.
116 ● display voice sip call-statistics 3Com Router 5000 Family and Router 6000 Family Command Reference SIPResp5MessageTooLarge : 0 SIPResp5Other : 0 SIPResp6xx : 0 See the following table for field description.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice sip call-statistics ● 117 Table 1 Description of the fields of the display voice sip call-statistics command Field Description SIPResp4RequestTermin ated 487 (Request Terminated) responses received by the SIP gateway SIPResp4Other Other 4xx responses received by the SIP gateway SIPResp5InternalError 500 (Server Internal Error) responses received by the SIP gateway SIPResp5NotImplemente 501 (Not Implemented) responses re
118 ● display voice sip register-state 3Com Router 5000 Family and Router 6000 Family Command Reference display voice sip register-state Purpose Use the display voice sip register-state command to view the registration state about the SIP user agents (UAs). Syntax display voice sip register-state Parameters None Example Display the registration state about the SIP UAs.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice subscriber-line ● 119 display voice subscriber-line Purpose Use the display voice subscriber-line command to view the configuration information about the type, status, codec mode, input gain and output attenuation of the subscriber line. Syntax display voice subscriber-line line-number Parameters line-number Example Display the configuration information about the subscriber line. Subscriber line number.
120 ● display voice subscriber-line View Field Description CNG Comfort noise configuration on the voice subscriber-line Reset Reset times of the board where voice subscriber-line is located Echo Cancel Time of echo cancel on the voice subscriber-line Position Slot and port number of the board where voice subscriber-line is located CID Receive Receive calling numbers about CID function CID Display Display calling number about CID function Gain (R&T) Input and output gain of the voice subscri
3Com Router 5000 Family and Router 6000 Family Command Reference display voice subscriber-line ● 121 display voice subscriber-line Purpose Use the display voice subscriber-line command to view the subscriber line configuration. Syntax display voice subscriber-line e1-number : { ts-set-number | 15 } display voice subscriber-line t1-number : 23 Parameters Example e1-number, t1-number Indicate the number of subscriber line generated in creating the Timeslot set or the ISDN PRI set.
122 ● display voice subscriber-line 3Com Router 5000 Family and Router 6000 Family Command Reference Table 1 Field description on voice subscriber-line configuration View Field Description comfort noise The comfort noise of the subscriber line The voice line was The signaling type of the subscriber line this subscriber line The connection method of the subscriber line receive gain The receive gain of the subscriber line transmit gain The transmit gain of the subscriber line first-dial timer
3Com Router 5000 Family and Router 6000 Family Command Reference display voice vcc ● 123 display voice vcc Purpose Use the display voice vcc command to view the information about the call channel status and call statistics. Syntax display voice vcc { channel [ line-number ] } | { statistic { all | error | ipp | proc | rcv | timer | vpp } } Parameters channel Display the status information of the call channel on the specified subscriber line.
124 ● display voice vcc 3Com Router 5000 Family and Router 6000 Family Command Reference FaxCallDuration ImgPages CallOrigin ! VoIP: SetupTime(voip) ConnectTime(voip) DisconectTime(voip) TransmitPackets(voip) TransmitBytes(voip) ReceivePackets(voip) ReceiveBytes(voip) ! PSTN: SetupTime(pstn) ConnectTime(pstn) DisconectTime(pstn) TransmitPackets(pstn) TransmitBytes(pstn) ReceivePackets(pstn) ReceiveBytes(pstn) = 00h 00m 00s = 0 = 1 = = = = = = = Mar 29, 2003 15:37:21 Mar 29, 2003 15:37:24 Mar 29, 2003 15
3Com Router 5000 Family and Router 6000 Family Command Reference Description display voice vcc ● 125 When setting the filtering rule, pay attention to the following points: The specified voice subscriber-line number cannot be greater than the number of the actual subscriber lines. If the specified line-number is greater than the number of the actually available subscriber lines, this enter is invalid.
126 ● display voice vofr call 3Com Router 5000 Family and Router 6000 Family Command Reference display voice vofr call Purpose Use the display voice vofr call command to view information of the current call. This command is used to display the information of incoming and outgoing call control blocks, the connection state of the modules, call state, calling number, called number, etc. Syntax display voice vofr call [ channel ] Parameters channel Example Display the information of the current call.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice vofr call ● 127 Table 1 Description of VoFR call statistics information View Field Description CCB VCC CRV Call reference value of VCC module VOFR CRV Call reference value of VoFR module Call Protocol Protocol type of VoFR presently Status Status of present call Call Mode Mode of the call, such as calling, called and idle Call Attrib Attribute of the call, such as normal or busy Release Type Cause of releasing
128 ● display voice vofr statistic 3Com Router 5000 Family and Router 6000 Family Command Reference display voice vofr statistic Purpose Use the display voice vofr statistic command to view the call statistics between the VoFR module and VCC, VPP and other modules. Syntax display voice vofr statistic { all | call | error | timer | vcc | vofr | vpp } Parameters all Displays all the statistics of VoFR module. call Displays the call statistics in VoFR module.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice vofr statistic ● 129 Table 1 Description of call statistics between the VoFR module and other modules View Field Description Send voice packets number Number of packets sent Receive voice packets number Number of packets received Lost voice packets received number Number of packets dropped This command can be used in the following views: ■ Any view
130 ● display voice voip 3Com Router 5000 Family and Router 6000 Family Command Reference display voice voip Purpose This command applies to E1 and T1 voice. The command display voice voip downqueue e1t1vi-bno displays the contents of the down interrupt queue between the E1/T1 voice card and the router main card. The command display voice voip up-queue e1t1vi-no displays the contents of the up interrupt queue between the E1/T1 voice card and the router main card.
3Com Router 5000 Family and Router 6000 Family Command Reference display voice voip data-statistic ● 131 display voice voip data-statistic Purpose Use the display voice voip data-statistic command to view statistics information of voice data. This command is used to display the following information: time for successfully searching the voice table, total number of received data packets, time for searching the table in fast and common modes and voice and fax of receive and transmit channels etc.
132 ● display voice voip data-statistic [VPP] LinkReceiveEmptyData [COM] AddTableTimes [COM] ClearTableTimes VOICE DATA INFORMATION: [FSD] FSSend_ReceiveDataTotal [COM] DiscardDataTotal [NET] NormalSendDataTotal [NET] SendToIPDataTotal [LOC] SendToLocalDataTotal FAX DATA INFORMATION: [FSD] FSSend_RcvFaxDataTotal [FDF] DiscardDataTotal [NET] SendToIPDataTotal [LOC] SendToLocalDataTotal View Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference : 0 : 0 : 0 : : : : : 483 0 0 0
3Com Router 5000 Family and Router 6000 Family Command Reference display voice vpp ● 133 display voice vpp Purpose Use the display voice vpp command to view all the statistic information in the VPP module.
134 ● display voice vpp 3Com Router 5000 Family and Router 6000 Family Command Reference Field Description RecvCodecmDataRightTi Times of receiving compression/decompression data correctly mes RecvCodecmDataWrong Times of receiving compression/decompression data wrongly Times SendCodecmDataRightT Times of sending compression/decompression data correctly imes RecvIppDataRightTimes Times of receiving IPP data correctly RecvIppDataWrongTime Times of receiving IPP data wrongly s SendIppDataRightTimes Time
3Com Router 5000 Family and Router 6000 Family Command Reference dl-bits ● 135 dl-bits Purpose Use the dl-bits command to configure the bit value of all the signals of R2 line signaling. Use the undo dl-bits command to restore the values to defaults.
136 ● dl-bits View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description R2 CAS view Use the dl-bits command to configure the bit value of all the signals of R2 line signaling. Use the undo dl-bits command to restore the values to defaults. This command applies to E1 voice only. You can use the dl-bits command to configure the ABCD bits value of R2 signaling for different coding schemes in different countries.
3Com Router 5000 Family and Router 6000 Family Command Reference dot-match ● 137 dot-match Purpose Use the dot-match command to configure dot match rules of the number-substitute rules. Use the undo dot-match command to restore the default value. The configuration of this command only applies to the rules of the number-substitute list in the current view. Syntax dot-match { end-only | left-right | right-left } undo dot-match Parameters end-only Reserve the digits that correspond to all the dots “.
138 ● dot-match 3Com Router 5000 Family and Router 6000 Family Command Reference the virtual match digits are 5; when it is matched with 1..5, the virtual match digits are 25. For details about dot match rules in number-substitute rules, refer to the rule command.
3Com Router 5000 Family and Router 6000 Family Command Reference dscp media ● 139 dscp media Purpose Use the dscp media command to set the DSCP value in the ToS field in the IP packets that carry the RTP stream of the voice entity. Use the undo dscp media command to restore the default DSCP. Syntax dscp media dscp-value undo dscp media Parameters dscp-value Example Set the DSCP value in the ToS field in the IP packets that carry the RTP stream of VoIP voice entity 2 to af41.
140 ● dtmf 3Com Router 5000 Family and Router 6000 Family Command Reference dtmf Purpose Use the dtmf command to configure the way of sending and receiving R2 signaling. Syntax dtmf { enable | disable } Parameters enable Enables R2 signaling to be received and sent in DTMF mode. disable Disables R2 signaling to be received and sent in DTMF mode. Default By default, MFC mode, not DTMF mode, is used to collect call number information. Example Configure DTMF mode to receive and send R2 signaling.
3Com Router 5000 Family and Router 6000 Family Command Reference dtmf sensitivity-level ● 141 dtmf sensitivity-level Purpose Use the dtmf sensitivity-level command to set the detection sensitivity level of DTMF codes. Use the undo dtmf sensitivity-level command to restore the default detection sensitivity level. Syntax dtmf sensitivity-level { high | low } undo dtmf sensitivity-level Parameters high Sets the DTMF code detection sensitivity level as high.
142 ● dtmf threshold 3Com Router 5000 Family and Router 6000 Family Command Reference dtmf threshold Purpose Use the dtmf threshold command to configure the sensitivity of DTMF digit detection. Use the undo dtmf threshold command to restore the default. Syntax dtmf threshold { analogue index value1 | digital value2 } undo dtmf threshold { analogue | digital } index Parameters analogue Sets an analog voice subscriber-line. digital Sets a digital voice subscriber-line.
3Com Router 5000 Family and Router 6000 Family Command Reference dtmf threshold ● 143 Index numbers Indicates 3 The lower threshold of ROWMAX / COLMAX when COLMAX >= ROWMAX. The function of this parameter is similar to that of index 2, except that they are in reverse. The ratio must be greater than this threshold for the input signal to be recognized as a DTMF digit. The threshold is an integer in the range -18 to -3 dB and defaults to -9 dB.
144 ● dtmf threshold 3Com Router 5000 Family and Router 6000 Family Command Reference Index numbers Indicates 12 The lower threshold of the amplitude of the input signal. The average amplitude must be greater than this threshold for the input signal to be recognized as a DTMF digit. This threshold is an integer in the range 0 to 700 and defaults to 375. A greater value means increased detection reliability but decreased sensitivity.
3Com Router 5000 Family and Router 6000 Family Command Reference dtmf threshold ● 145 Figure 1 Spectrum of Keys The tone of each telephone digit is composed of two single-frequency tones. For example, the tone of the digit 1 is compounded by two sine wave signal tones of 697 Hz and 1209 Hz. A valid key tone must last at least 45 milliseconds and have an inter-digit delay of 23 milliseconds. Refer to ITU-T Q.24 recommendation for full information.
146 ● echo-canceller 3Com Router 5000 Family and Router 6000 Family Command Reference echo-canceller Purpose Use the echo-canceller command to configure echo-cancellation parameters. Use the undo echo-canceller command to remove the configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference echo-canceller ● 147 [Router-voice-line1/0/0] echo-canceller enable [Router-voice-line1/0/0] echo-canceller tail-length 24 View This command can be used in the following views: ■ Description Voice Subscriber-Line view During a call, the voice of a subscriber may be echoed back to the handset. This is because analog voice signals are leaked into the reception path of the subscriber.
148 ● effect-time 3Com Router 5000 Family and Router 6000 Family Command Reference effect-time Purpose Use the effect-time command to configure the debounce time of line signaling. Use the undo effect-time command to restore the default. Syntax effect-time time undo effect-time Parameters time Example Set the debounce time of line signaling to 20 milliseconds for timeslot set 3 on the E1 subscriber-line 1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference em-phy-parm ● 149 em-phy-parm Purpose Use the em-phy-parm command to configure a wire scheme for the analog E&M subscriber-line. Use the undo em-phy-parm command to cancel an existing wire selection scheme. Syntax em-phy-parm { 2-wire | 4-wire } undo em-phy-parm { 2-wire | 4-wire } Parameters 2-wire Choose the 2-wire analog E&M wire scheme. 4-wire Choose the 4-wire analog E&M wire scheme.
150 ● em-signal 3Com Router 5000 Family and Router 6000 Family Command Reference em-signal Purpose Use the em-signal command to configure a voice subscriber-line start mode. Use the undo em-signal command to cancel the set voice subscriber-line start mode. Syntax em-signal { delay | immediate | wink } undo em-signal { delay | immediate | wink } Parameters wink Wink start mode.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Command delay em-signal ● 151
152 ● entity 3Com Router 5000 Family and Router 6000 Family Command Reference entity Purpose Use the entity command to configure a voice entity and enter its view (at the same time specify the working mode related to voice). Use the undo entity command to cancel an existing voice entity. In a global view, use the entity command to enter a Voice entity view, and use quit to return to the dial program view.
3Com Router 5000 Family and Router 6000 Family Command Reference fax baudrate ● 153 fax baudrate Purpose Use the fax baudrate command to configure the highest fax baudrate enabled by the gateway. Syntax fax baudrate { 14400 | 2400 | 4800 | 9600 | disable | voice } Parameters 14400 Negotiate first according to V.17 fax protocol, the highest fax baudrate is 14400bit/s. 2400 The first fax baudrate is 2400bps. 4800 Negotiate first according to V.27 fax protocol, the highest fax baudrate is 4800bps.
154 ● fax baudrate 3Com Router 5000 Family and Router 6000 Family Command Reference If the rate is set as “disable”, fax function is disabled. When G.711 voice encoding/decoding protocol is configured for the two parties, the fax baudrate disable command functions the same as the default entity fax protocol pcm command.
3Com Router 5000 Family and Router 6000 Family Command Reference fast-connect ● 155 fast-connect Purpose Use the fast-connect command to enable fast connect. Use the undo fast-connect command to disable fast connect. Syntax fast-connect undo fast-connect Parameters None Default By default, fast connect is disabled. Example Enable fast connect for VoIP voice entity 10.
156 ● fax ecm 3Com Router 5000 Family and Router 6000 Family Command Reference fax ecm Purpose Use the fax ecm command to configure the forced adoption of ECM mode at the gateway, that is, to make the facsimiles at both ends support ECM mode. Use the undo fax ecm command to cancel the ECM mode at the gateway. Syntax fax ecm undo fax ecm Parameters None Default By default, the ECM mode is not used on the gateway. Example Configure forced adoption of ECM mode at the gateway.
3Com Router 5000 Family and Router 6000 Family Command Reference fax level ● 157 fax level Purpose Use the fax level command to configure the gateway carrier transmitting energy level. Use the undo fax level command to restore it to the default value. Syntax fax level level undo fax level Parameters level Example Configure the gateway carrier transmitting energy level as 20. Gateway carrier transmitting energy level, namely the transmit energy level attenuation value, ranging from –60 to –3 dBm.
158 ● fax local-train threshold 3Com Router 5000 Family and Router 6000 Family Command Reference fax local-train threshold Purpose Use the fax local-train command to configure the percentage of fax local training threshold value. Use the undo fax local-train command to restore the default value. Syntax fax local-train threshold threshold undo fax local-train threshold Parameters threshold Example Configure the percentage of fax local training threshold to 20.
3Com Router 5000 Family and Router 6000 Family Command Reference fax nsf-on ● 159 fax nsf-on Purpose Use the fax nsf-on common to configure the fax faculty transmission mode as Not Standard mode. Use the undo nsf-on command to restore the default fax faculty transmission mode. Syntax fax nsf-on undo fax nsf-on Parameters None Default By default, the fax faculty transmission mode is undo nsf-on. Example Configure to perform fax transmission with NSF.
160 ● fax protocol 3Com Router 5000 Family and Router 6000 Family Command Reference fax protocol Purpose Use the fax protocol command to configure the protocol for intercommunication with other devices or enable the fax Passthrough mode, and configure the number of redundant packets sent via the T.38 fax protocol. The argument standard-t38 indicates the standard T38 negotiation mode specified by H323 or SIP adopted.
3Com Router 5000 Family and Router 6000 Family Command Reference Description fax protocol ● 161 Use the fax protocol command to configure the protocol for intercommunication with other devices or enable the fax Passthrough mode, and configure the number of redundant packets sent via the T.38 fax protocol. The argument standard-t38 indicates the standard T38 negotiation mode specified by H323 or SIP adopted.
162 ● fax support-mode 3Com Router 5000 Family and Router 6000 Family Command Reference fax support-mode Purpose Use the fax support-mode command to configure the fax interworking mode with other equipments. Use the undo fax support-mode command to restore the fax interworking mode with other equipment to its default. Syntax fax support-mode { rtp | vt | sip-udp } undo fax support-mode Parameters rtp RTP mode. vt VT mode, the mode when interworking with the VocalTec gateway.
3Com Router 5000 Family and Router 6000 Family Command Reference fax train-mode ● 163 fax train-mode Purpose Use the fax train-mode command to configure the training mode used by the gateway. Use the undo fax train-mode command to restore the training mode used by the gateway to the default. Syntax fax train-mode { local | ppp } undo fax train-mode Parameters local Use the local training mode. ppp Use the end-to-end training mode. Default By default, the ppp mode is adopted.
164 ● final-callednum 3Com Router 5000 Family and Router 6000 Family Command Reference final-callednum Purpose Use the final-callednum command to enable or disable the terminate signal to be sent to the terminating point after the called number is sent. Syntax final-callednum { enable | disable } Parameters enable Enables the called number terminate signal to be sent back. disable Disables the called number terminate signal to be sent back.
3Com Router 5000 Family and Router 6000 Family Command Reference first-rule ● 165 first-rule Purpose Use the first-rule command to configure the number-substitute rule that is first used in the current number-substitute list. Use the undo first-rule command to restore the default number-substitute rule. Syntax first-rule rule-number undo first-rule Parameters rule-number Default By default, the configured rule with the smallest serial number is used first.
166 ● force-metering 3Com Router 5000 Family and Router 6000 Family Command Reference force-metering Purpose Use the force-metering command to enable or disable the metering signal of R2 signaling. Syntax force-metering { enable | disable } Parameters enable Enables the metering signal of R2 signaling. disable Disables the metering signal of R2 signaling. Default By default, the metering signal of R2 signaling is disabled. Example Enable the metering signal of R2 signaling.
3Com Router 5000 Family and Router 6000 Family Command Reference fxo-monitoring ● 167 fxo-monitoring Purpose Use the fxo-monitoring enable command to enable the on line monitoring function on all FXO interfaces of the device. Use the undo fxo-monitoring enable command to disable the on line monitoring function on all FXO interfaces of the device. Syntax fxo-monitoring enable undo fxo-monitoring enable Parameters None.
168 ● group-b 3Com Router 5000 Family and Router 6000 Family Command Reference group-b Purpose Use the group-b command to enable or disable Group-B stage signal to complete register exchange. Syntax group-b { enable | disable } Parameters enable Enables signal exchange at Group-B stage of R2 signaling. disable Disables signal exchange at Group-B stage of R2 signaling, that is, backward Group-A signal A6 is used to complete register exchange directly.
3Com Router 5000 Family and Router 6000 Family Command Reference gk-client ● 169 gk-client Purpose Use the gk-client command to enter Voice GK client view, and configure the GK parameters for voice. Use the quit command to exit this view. Syntax gk-client Parameters None Example Enter gk-client view.
170 ● gk-id 3Com Router 5000 Family and Router 6000 Family Command Reference gk-id Purpose Use the gk-id command to configure the GK Server name and IP address corresponding to the gateway. Use the undo gk-id command to cancel the GK Server name and IP address corresponding to the gateway.
3Com Router 5000 Family and Router 6000 Family Command Reference gk-2nd-id ● 171 gk-2nd-id Purpose Use the gk-2nd-id command to configure the name and IP address of the backup GK Server corresponding to the gateway. Use the undo gk-2nd-id command to cancel the name and IP address of the backup GK Server corresponding to the gateway. Use the gk-2nd-id command to configure the IP address, name and port of the backup GK Server.
172 ● gk-security call 3Com Router 5000 Family and Router 6000 Family Command Reference gk-security call Purpose Use the gk-security call enable command to enable security calls on the GK Client (router). Use the undo gk-security call enable command to disable security calls on the GK Client (router). Syntax gk-security call enable undo gk-security call enable Parameters None Default By default, enable security calls. Example Disable the security calls on the GK Client (router).
3Com Router 5000 Family and Router 6000 Family Command Reference gk-security register-pwd ● 173 gk-security register-pwd Purpose Use the gk security register-pwd command to set the GK register password. Use the gk-security register-pwd command to remove the GK register password. Syntax gk-security register-pwd { cipher | simple } password undo gk-security register-pwd Parameters cipher Use encrypted password when echo is adopted. simple Do not use encrypted password when echo is adopted.
174 ● gw-access-number 3Com Router 5000 Family and Router 6000 Family Command Reference gw-access-number Purpose Use the gw-access-number command to configure the access service number or enter the view of the access service number. Use the undo gw-access-number command to cancel a single access service number or all access service numbers that have been set.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands gw-access-number ● 175 ■ The digits of an access service number cannot be more than 31, if those of the entered access-number are over 31, this enter is invalid. ■ At most 100 access service numbers are allowed to be set in the system, if 100 pieces of access-number have been set, no more access service number can be added. To continue with adding settings, please delete some records.
176 ● gw-address 3Com Router 5000 Family and Router 6000 Family Command Reference gw-address Purpose Use the gw-address command to configure the source IP address used by the voice gateway. Use the undo gw-address command to cancel the source IP address used by the voice gateway. Syntax gw-address ip-address undo gw-address Parameters ip-address Default By default, the source IP address used by the voice gateway is not configured.
3Com Router 5000 Family and Router 6000 Family Command Reference gw-id ● 177 gw-id Purpose Use the gw-id command to configure the gateway alias. Use the undo gw-id command to cancel the alias of the specified gateway. Use the command gw-id to configure the gateway alias, which is used for the gateway to register and identify the voice gateway. Each gateway has only one alias, and the new alias will cover the old one.
178 ● hookoff-time 3Com Router 5000 Family and Router 6000 Family Command Reference hookoff-time Purpose Use the hookoff-time command to configure the hangup timer. When this timer times out, the interface hangs up. Use the undo hookoff-time command to cancel the setting of the hangup timer. Syntax hookoff-time time undo hookoff-time Parameters time Example Set the hangup timer to 500 seconds. Length of the hangup timer, in the range 60 to 36000 seconds. By default, no hangup timer is set.
3Com Router 5000 Family and Router 6000 Family Command Reference impedance ● 179 impedance Purpose Use the impedance command to configure the current electric impedance on a voice subscriber-line. Use the undo impedance command to restore the default electric impedance on the voice subscriber-line. Syntax impedance { country-name | R550 | R600 | R650 | R700 | R750 | R800 | R850 | R900 | R950 } undo impedance Parameters country-name Specifies a country so that its impedance standard is used.
180 ● impedance Description 3Com Router 5000 Family and Router 6000 Family Command Reference You can specify an impedance value by specifying the country where the value applies. You may just input the leading letters that uniquely identify the country however.
3Com Router 5000 Family and Router 6000 Family Command Reference line ● 181 line Purpose Use the line command to associate the voice entity with a specified voice subscriber-line. Use the undo line command to cancel this association. This command can be used in POTS Voice entity view only. Syntax line line-number undo line Parameters line-number Example Associate voice entity 10 and voice subscriber-line 0/0/0. Number of a subscriber line.
182 ● line 3Com Router 5000 Family and Router 6000 Family Command Reference line Purpose Use the line command to configure the corresponding relationship between the POTS voice entity and the logic subscriber line. Use the undo line command to cancel the corresponding relationship between the POTS peer and the logical subscriber line. This command applies to E1 and T1 voice. This command can be used in POTS voice entity view only and takes effect on E1/T1 voice subscriber-line only.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ timeslot-set ■ entity ■ pri-set line ● 183
184 ● loopback 3Com Router 5000 Family and Router 6000 Family Command Reference loopback Purpose Use the loopback command to set the loopback mode on the interface. Use the undo loopback command to restore the default. Syntax loopback { local | remote | payload } undo loopback Parameters Example local Places the local physical layer in a local loopback. remote Places the local physical layer in a remote loopback. payload Places the local physical layer in a payload loopback.
3Com Router 5000 Family and Router 6000 Family Command Reference match-template ● 185 match-template Purpose Use the match-template command to configure the match template for a voice entity. Use the undo match-template command to delete this configuration. Syntax match-template match-string undo match-template Parameters match-string Match template. Its format is [ + ] { string [ T ] [ $ ] | T }, with the largest length of 31 characters. The characters are described in the following.
186 ● match-template Example 3Com Router 5000 Family and Router 6000 Family Command Reference Character Meaning () A group of characters. For example, (123A) means a string “123A”. It is usually used with “!”, “%”, and “+”. For example, “408(12)+” can match 40812 or 408121212. But it cannot match 408. That is, “12” can appear continuously and it must at least appear once. ■ The character or characters in front of "!”, “%”, and “+” are not to be matched accurately.
3Com Router 5000 Family and Router 6000 Family Command Reference match-template ● 187 complete the call if the match is successful. The match template can be defined flexibly. It can not only be a string of a unique number like 01016781234, but also an expression that can match a group of numbers, such as “010[1-5]678…”. They are used to match the actual numbers in the received call packets to complete the calls. ■ VRP software does not check the validity of E.164 numbers.
188 ● max-call (in Voice Dial Program View) 3Com Router 5000 Family and Router 6000 Family Command Reference max-call (in Voice Dial Program View) Purpose Use the max-call command to configure max-call sets (128 sets at most). Use the undo max-call command to delete the specified set or all the max-call sets. This command is used to limit the number of call connections for a voice entity or a group of voice entities.
3Com Router 5000 Family and Router 6000 Family Command Reference max-call (in Voice Entity View) ● 189 max-call (in Voice Entity View) Purpose Use the max-call command to bind a voice entity to the max-call set specified by set-number. Use the undo max-call command to delete the binding. Each voice entity can only be bound to one max-call set, but you can change the binding.
190 ● mfc (R2 CAS) 3Com Router 5000 Family and Router 6000 Family Command Reference mfc (R2 CAS) Purpose Use the mfc command to maintain of MFC channel of the specified timeslot. Syntax mfc { block | open | query } timeslots timeslots-list Parameters block Indicates blocking the MFC channel of the specified timeslot. open Indicates opening the MFC channel of the specified timeslot. query Indicates querying the MFC channel of the specified timeslot. timeslots-list Specifies a timeslot range.
3Com Router 5000 Family and Router 6000 Family Command Reference mode ● 191 mode Purpose Use the mode command to configure the R2 signaling mode in a country or region. Use the undo mode command to restore the default, as you would with the mode itu-t default-standard command. Syntax mode zone-name [ default-standard ] undo mode Parameters zone-name default-standard Default Name of the country or region. By default, it is set to the mode of ITU-T.
192 ● mode Example 3Com Router 5000 Family and Router 6000 Family Command Reference Adopt the default standard of Hongkong R2 signaling mode. [3Com -cas1/0/0:0] mode hongkong default-standard View This command can be used in the following views: ■ Description R2 CAS view Use the mode command to configure the R2 signaling mode in a country or region. Use the undo mode command to restore the default, as you would with the mode itu-t default-standard command. This command applies to E1 voice only.
3Com Router 5000 Family and Router 6000 Family Command Reference mode (SIP Client view) ● 193 mode (SIP Client view) Purpose Use the mode command to set the registration mode of the gateway. Use the undo mode command to restore the default registration mode, or the gateway mode. Syntax mode {gateway { all | single } | phone number number } undo mode Parameters Example gateway sets the registration mode of the gateway to gateway. all All telephone numbers are carried in one register message.
194 ● motorola base-svc 3Com Router 5000 Family and Router 6000 Family Command Reference motorola base-svc Purpose Use the motorola base-svc command to configure the start SVC for voice routing on a DLCI. Use the undo motorola base-svc command to restore the default. Syntax motorola base-svc start-svc undo motorola base-svc Parameters start-svc Example Specify the start SVC for voice routing on DLCI 100 to 100. Start SVC for voice routing. Valid values are 1 to 4080.
3Com Router 5000 Family and Router 6000 Family Command Reference motorola encapsulation ● 195 motorola encapsulation Purpose Use the motorola encapsulation command to specify an encapsulation for Motorola LCON on the DLCI. Use the undo motorola encapsulation command to restore the default. Syntax motorola encapsulation { codex | rfc1294 } undo motorola max-voice Parameters codex Motorola codex encapsulation. rfc1294 RFC 1294 multi-protocol encapsulation.
196 ● motorola max-voice 3Com Router 5000 Family and Router 6000 Family Command Reference motorola max-voice Purpose Use the motorola max-voice command to configure the maximum number of voice channels created on a DLCI concurrently. Use the undo motorola max-voice command to restore the default. Syntax motorola max-voice max-number undo motorola max-voice Parameters max-number Example Specify that a maximum of 10 voice channels can be concurrently set up on DLCI 100.
3Com Router 5000 Family and Router 6000 Family Command Reference motorola remote-id ● 197 motorola remote-id Purpose Use the motorola remote-id command to configure a remote connection ID. Use the undo motorola remote-id command to restore the default. Syntax motorola remote-id index undo motorola remote-id Parameters index Example Set the remote connection ID to 20. Remote connection ID. Valid values are 1 to 255. If no value is specified, the default is 1.
198 ● number-match 3Com Router 5000 Family and Router 6000 Family Command Reference number-match Purpose Use the number-match command to configure a global number match-policy. Use the undo number-match command to restore the default. Syntax number-match { longest | shortest } undo number-match Parameters longest Indicate to perform the match according to the longest number. shortest Indicate to perform the match according to the shortest number.
3Com Router 5000 Family and Router 6000 Family Command Reference number-substitute ● 199 number-substitute Purpose Use the number-substitute command to create a number-substitute list and enter voice dial program view. Use the undo number-substitute command to delete the specified number-substitute list or all the number-substitute lists. Syntax number-substitute list-number undo number-substitute { list-number | all } Parameters list-number Serial number of number-substitute list.
200 ● outband 3Com Router 5000 Family and Router 6000 Family Command Reference outband Purpose Use the outband command to configure transmission of DTMF code in the outband mode. Use the undo outband command to restore transmission of DTMF code to inband mode. Syntax outband { h225 | h245 | sip } undo outband Parameters h225 Enables DTMF H.225 out-of-band transmission. h245 Enables DTMF H.245 out-of-band transmission. sip Enables DTMF SIP out-of-band transmission.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ fast-connect ■ tunnel-on outband ● 201
202 ● outband vofr 3Com Router 5000 Family and Router 6000 Family Command Reference outband vofr Purpose Use the outband vofr command to configure out-of-band transmission of DTMF codes. Use the undo outband command to restore transmission of DTMF codes to in-band mode. Syntax outband vofr undo outband Parameters None Default By default, in-band transmission is adopted. Example Configure VoFR voice entity 10 to transmit DTMF codes out of band.
3Com Router 5000 Family and Router 6000 Family Command Reference password-digit ● 203 password-digit Purpose Use the password-digit command to configure the user password digits of a certain access service number in the card number process. Syntax password-digit password-digit Parameters password-digit Example Set the password in 4 digits for the access service number 18901. The password digit, in the range from 1 to 16.By default, the user password is in 6 digits.
204 ● payload-size 3Com Router 5000 Family and Router 6000 Family Command Reference payload-size Purpose Use the payload-size command to notify the underlying layer how much time DSP spends assembling a voice packet, or the time length of each voice packet. Use the undo payload-size command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference payload-size ● 205 Restore the default time that DSP spends assembling a voice packet in g711 codec mode for voice entity 8801. [route-voice-dial-entity8801] undo payload-size g711 Set the default time that DSP spends assembling a voice packet in g729 mode to 180 milliseconds.
206 ● pcm 3Com Router 5000 Family and Router 6000 Family Command Reference pcm Purpose Use the pcm command to configure a companding law used for quantizing signals. Use the undo pcm command to restore the default. Syntax pcm { a-law | µ-law } undo pcm Parameters a-law Companding A-law, used in most part of the world, such as China, Europe, Africa, and South America. µ-law Companding µ-law, used in North America. Default By default, A-law applies.
3Com Router 5000 Family and Router 6000 Family Command Reference plan-numbering ● 207 plan-numbering Purpose Use the plan-numbering command to configure the calling/called numbering plan attribute of voice entities. Use the undo plan-numbering command to restore the default numbering plan. Syntax plan-numbering { called | calling } { data | isdn | national | private | reserved | telex | unknown } undo plan-numbering { called | calling } Parameters called Called number. calling Calling number.
208 ● plc-mode 3Com Router 5000 Family and Router 6000 Family Command Reference plc-mode Purpose Use the plc-mode command to configure packet loss compensation mode. Use the undo plc-mode command to restore the default packet loss compensation mode. Syntax plc-mode { general | specific } undo plc-mode Parameters general Uses the universal frame erasure algorithm. specific Uses the specific algorithm provided by the voice gateway. Default By default, the specific algorithm is used.
3Com Router 5000 Family and Router 6000 Family Command Reference pri-set ● 209 pri-set Purpose Use the pri-set command to bundle timeslots on the CT1/PRI or CE1/PRI interface into a pri-set. Use the undo pri-set command to remove the timeslot bundle. Syntax pri-set [ timeslot-list range ] undo pri-set Parameters range Default By default, no timeslots are bundled into pri-sets. Example On the CE1/PRI interface bundle timeslots 1, 2, and 8 through 12 into a pri-set. Number of bundled timeslots.
210 ● pri-set 3Com Router 5000 Family and Router 6000 Family Command Reference ■ Only one timeslot bundling mode is supported on one CE1/PRI interface at a time. In other words, you cannot use this command and the channel-set command together. When creating a pri-set on a CT1/PRI interface, note the following: ■ Timeslot 24 is D channel for transmitting signaling; it cannot form a bundle that includes itself only. The attempts to bundle only timeslot 24 will fail.
3Com Router 5000 Family and Router 6000 Family Command Reference priority ● 211 priority Purpose Use the priority command to configure the priority levels for voice entities. Use the undo priority command to restore the default priority level. Syntax priority priority-order undo priority Parameters priority-order Default By default, the priority level is set to 0. Example Set the priority level of voice entity 10 to 5. Priority of a voice entity. Valid values are 0 to 10.
212 ● priority 3Com Router 5000 Family and Router 6000 Family Command Reference priority Purpose Use the priority command to assign a priority to the voice entity. Use the undo priority command to restore the default. Syntax priority priority-number undo priority Parameters priority-number Example Set the priority of VoFR voice entity 2001 to 5. Voice entity priority. Valid values are 0 to 10, with 0 being the highest priority and 10 being the lowest. If no value is specified, the default is 0.
3Com Router 5000 Family and Router 6000 Family Command Reference private-line ● 213 private-line Purpose Use the private-line command to configure private auto-ring mode for the subscriber line and the E.164 telephone number of the destination end. Use the undo private-line command to cancel the specified connection mode. Syntax private-line string undo private-line Parameters string Default By default, no private auto-ring mode is configured.
214 ● process-config 3Com Router 5000 Family and Router 6000 Family Command Reference process-config Purpose Use the process-config command to configure the dialing process of a certain access service number. Syntax process-config { callernumber | cardnumber | voice-caller } Parameters callernumber Caller number process. After a user dials the access service number, the system continues to send dialing tones to the user, so that he can enter the called number.
3Com Router 5000 Family and Router 6000 Family Command Reference process-config ● 215 With VRP, three dial processes are available: calling number process, card number process, and voice caller number process. Related Commands ■ Caller number process: It is actually the caller number authentication process, which is the authentication, authorization and accounting process carried out according to the caller number of the user.
216 ● ras-on 3Com Router 5000 Family and Router 6000 Family Command Reference ras-on Purpose Use the ras-on command to enable the GK Client function. Use the undo ras-on command to disable the GK Client function. Syntax ras-on undo ras-on Parameters None Default By default, the GK Client function is disabled. Example Activate the GK Client function.
3Com Router 5000 Family and Router 6000 Family Command Reference re-answer ● 217 re-answer Purpose Use the re-answer command to enable or disable the originating point to support re-answer signal process. Syntax re-answer { enable | disable } Parameters enable Enables the originating point to support re-answer signal process. disable Disables the originating point to support re-answer signal process. Default By default, the originating point does not support re-answer signal process.
218 ● receive gain 3Com Router 5000 Family and Router 6000 Family Command Reference receive gain Purpose Use the receive gain command to configure the gain value at the voice subscriber-line input end. Use the undo receive gain command to restore the default value. Syntax receive gain value undo receive gain Parameters value Example Configure the voice input gain as 3.5dB on subscriber line 1/0/0. Voice input gain ranging from -14.0 to 14.0 in dB with one digit after the decimal point.
3Com Router 5000 Family and Router 6000 Family Command Reference redialtimes ● 219 redialtimes Purpose Use the redialtimes command to configure the number of times of dialing in each dialing phase for a certain access service number. Syntax redialtimes redialtimes-number Parameters redialtimes-number Example Configure the number of redialing times of the card number/password of the access service number 18901 to be 4 (the number can be dialed for 5 times).
220 ● register-enable 3Com Router 5000 Family and Router 6000 Family Command Reference register-enable Purpose Use the register-enable command to enable or disable the SIP registration function. Syntax register-enable { on | off } undo register-enable Parameters on Enables the SIG registration function. off Disables the SIG registration function. Default By default, the SIP registration function is not enabled. Example Enable the SIP registration function.
3Com Router 5000 Family and Router 6000 Family Command Reference register-number ● 221 register-number Purpose Use the register-number command to enable the gateway (the VoIP-enabled router) to register the number of the voice entity with the H.323 gatekeeper or SIP server. Use the undo register-number command to disable the gateway to register the number of the voice entity when registering with the H.323 gatekeeper or SIP server.
222 ● register-value 3Com Router 5000 Family and Router 6000 Family Command Reference register-value Purpose Use the register-value command to configure the value of all register signals of R2 signaling. Use the undo register-value command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference register-value ● 223 Specifies request current digit value. Valid values are 1 to 16. If no value is specified, the default is 16. req-firstcallingnum value Specifies request first calling number value. Valid values are 1 to 16. If no value is specified, the default is 5. req-firstdigit value Specifies request first digit value. Valid values are 1 to 16. If no value is specified, the default is 16.
224 ● register-value 3Com Router 5000 Family and Router 6000 Family Command Reference By configuring the register-value command, you can send the specified request signal and require the opposite exchange to send back the corresponding answer signal. For example, using the register-value callingcategory command, you can enable the terminating point to send the specified signal to require the originating point to send back the calling category.
3Com Router 5000 Family and Router 6000 Family Command Reference renew ● 225 renew Purpose Use the renew command to configure the signal values of C bit and D bit. Use the undo renew command to restore the default value. Syntax renew ABCD undo renew Parameters ABCD Example Configure the signal values of both the C-bit and D-bit of R2 line signaling as 1. Indicate the default of each signal bit in transmission, with the value being 0 or 1. It defaults to 1111.
226 ● reset voice call-history-record line 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice call-history-record line Purpose Use the reset voice call-history-record line command to clear the call history of all voice subscriber lines, or information displayed by the display voice call-history-record line command. Syntax reset voice call-history-record line Parameters None Example Clear the call history of all voice-subscriber lines.
3Com Router 5000 Family and Router 6000 Family Command Reference reset voice em ● 227 reset voice em Purpose Use the reset voice em command to reset the call statistics on the digital E&M interface. Syntax reset voice em Parameters None Example Reset the call statistics on the E&M interface. reset voice em View This command can be used in the following views: ■ User view Description This command applies to E1 voice lines only.
228 ● reset voice fax 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice fax Purpose Use the reset voice fax command to reset fax statistics. Syntax reset voice fax Parameters None Example Clear fax statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset voice fax trans-statistics ● 229 reset voice fax trans-statistics Purpose Use the reset voice fax trans-statistics command to reset the statistics for the FAX transform module. Syntax reset voice fax trans-statistics Parameters None Example Clear the statistics for the fax transform module.
230 ● reset voice ipp 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice ipp Purpose Use the reset voice ipp command to reset IPP statistics. Syntax reset voice ipp Parameters None Example Clear IPP statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset voice r2 ● 231 reset voice r2 Purpose Use the reset voice r2 command to reset the call statistics of R2 signaling. Syntax reset voice r2 Parameters None Example Reset the call statistics of R2 signaling. reset voice r2 View This command can be used in the following views: ■ User view Description This command applies to E1 voice only.
232 ● reset voice rcv 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice rcv Purpose Use the reset voice rcv command to reset RCV statistics. Syntax reset voice rcv Parameters None Example Clear RCV statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset voice sip ● 233 reset voice sip Purpose Use the reset voice sip command to reset all the statistic information about the SIP client. Syntax reset voice sip Parameters None Example Reset all the statistic information about the SIP client.
234 ● reset voice vcc 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice vcc Purpose Use the reset voice vcc command to reset the information related to VCC. Syntax reset voice vcc { all | call-record | statistics } Parameters all Clear all information. call-record Clear the call record information. statistics Clear the statistics. Example Clear the generated call record information.
3Com Router 5000 Family and Router 6000 Family Command Reference reset voice voip data-statistics ● 235 reset voice voip data-statistics Purpose Use the reset voice voip data-statistic command to reset statistics information of voice data. Syntax reset voice voip data-statistic Parameters None Example Clear statistics information of voice data.
236 ● reset voice vpp 3Com Router 5000 Family and Router 6000 Family Command Reference reset voice vpp Purpose Use the reset voice vpp command to reset VPP statistics. Syntax reset voice vpp Parameters None Example Clear VPP statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reverse ● 237 reverse Purpose Use the reverse command to configure the inversion mode of line signals. Use the undo reverse command to restore the default value. Syntax reverse ABCD undo reverse Parameters ABCD Example reverse the B-bit and D-bit of the R2 line signaling. Indicates whether to perform the inversion of each signal bit, with the value of each bit being 0 or 1.
238 ● ring-generate 3Com Router 5000 Family and Router 6000 Family Command Reference ring-generate Purpose Use the ring-generate command to configure the gateway at the called side to give a ringback tone when in quick start mode. Use the ring-generate command to remove the configuration and then the ringback tone generated by the switch will be transmitted transparently.
3Com Router 5000 Family and Router 6000 Family Command Reference rule ● 239 rule Purpose Use the rule command to configure the number-substitute rules. Use the undo rule command to delete the specified or all number-substitute rules. Syntax rule rule-tag input-number output-number undo rule { rule-tag | all } Parameters all Deletes all number substitution rules. rule-tag Number of a rule. Valid values are 0 to 127. input-number Input string for number substitute.
240 ● rule 3Com Router 5000 Family and Router 6000 Family Command Reference Pay attention to the following points: The character or characters in front of "!”, “%”, and “+” are not to be matched accurately. They are handled similar to the wildcard “.”. Moreover, these symbols cannot be used alone. There must be a valid digit or digits in front of them. number-type Number type. numbering-plan Numbering plan.
3Com Router 5000 Family and Router 6000 Family Command Reference ■ rule ● 241 Discards (the digits corresponding to) the extra dots in input-number.
242 ● seizure-ack 3Com Router 5000 Family and Router 6000 Family Command Reference seizure-ack Purpose Use the seizure-ack command to enable or disable the terminating point to send seizure acknowledgement signal. Syntax seizure-ack { enable | disable } Parameters enable Enables the terminating point to send seizure acknowledgement signal. disable Disables the terminating point to send seizure acknowledgement signal. Default By default, the terminating point sends seizure acknowledgement signal.
3Com Router 5000 Family and Router 6000 Family Command Reference selectlanguage ● 243 selectlanguage Purpose Use the selectlanguage command to enable or disable the voice gateway to play the prompt language selection message in the voice caller number process. This command only applies to the voice caller number process. Syntax selectlanguage { disable | enable } Parameters disable Disables language selection. enable Enables language selection. Default By default, language selection is disabled.
244 ● select-mode 3Com Router 5000 Family and Router 6000 Family Command Reference select-mode Purpose Use the select-mode command to configure the E1 trunk selection mode. Use the undo select-mode command to restore the default. Syntax select-mode [ max | maxpoll | min | minpoll ] undo select-mode Parameters max Indicate the maximum selection. maxpoll Indicate the maximum polling selection. min Indicate the minimum selection. minpoll Indicate the minimum polling selection.
3Com Router 5000 Family and Router 6000 Family Command Reference select-mode ● 245 The parameter minpoll indicates the minimum polling selection. When used for the first time, select the timeslot of the minimum serial number from the currently available timeslots , and next time select in descending order the available timeslot whose serial number is bigger than it. For example, No.1 and No.3 timeslots are unavailable in 32 timeslots, so select firstly No.2 timeslot, and select No.4 timeslot secondly.
246 ● select-rule rule-order 3Com Router 5000 Family and Router 6000 Family Command Reference select-rule rule-order Purpose Use the select-rule rule-order command to configure the select rule of voice entities. Use the undo select-rule rule-order command to restore the default value. Syntax select-rule rule-order 1 [ 2 [ 3 ] [ 4 ]] undo select-rule rule-order Parameters The following lists the meanings of the serial numbers.
3Com Router 5000 Family and Router 6000 Family Command Reference select-rule rule-order ● 247 2. Priority. Voice entities are divided into 11 classes, with values ranging from 0 to 10. The smaller the value is, the higher the priority is. That means 0 is the highest priority. 3. Random select. The system selects a voice entity from a group of qualified voice entities randomly. 4. Longest unused. The longer the voice entity is unused, the higher its priority is.
248 ● select-rule search-stop 3Com Router 5000 Family and Router 6000 Family Command Reference select-rule search-stop Purpose Use the select-rule search-stop command to configure the maximum number of voice entities found. Use the undo select-rule search-stop command to cancel the limitation on the search for voice entities.
3Com Router 5000 Family and Router 6000 Family Command Reference select-rule type-first ● 249 select-rule type-first Purpose Use the select-rule type-first command to configure the type-first select rules for voice entities. Use the undo select-rule type-first command to delete the type-first select rules. Syntax select-rule type-first 1st-type 2nd-type 3rd-type undo select-rule type-first Parameters 1st-type Serial number of the type of the first priority. Valid values are 1 to 3.
250 ● select-rule type-first Related Commands 3Com Router 5000 Family and Router 6000 Family Command Reference ■ select-rule rule-order ■ select-rule search-stop
3Com Router 5000 Family and Router 6000 Family Command Reference select-stop ● 251 select-stop Purpose Use the select-stop command to disable the search for voice entities. Use the undo select-stop command to re-enable the search for voice entities. Syntax select-stop undo select-stop Parameters None Default By default, the search for voice entities is enabled. Example Configure the system to stop the search once voice entity 10 is found.
252 ● send-busytone 3Com Router 5000 Family and Router 6000 Family Command Reference send-busytone Purpose Use the send-busytone command to enable busy tone sending on the FXO interface. Use the undo send-busytone command to disable busy tone sending on the FXO interface. Syntax send-busytone { enable | time seconds } undo send-busytone { enable | time } Parameters enable Enables busy-tone sending on the FXO interface. time seconds Duration of busy tone, in the range 2 to 15 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference send-number (in Voice Entity View) ● 253 send-number (in Voice Entity View) Purpose Use the send-number command to configure the number sending mode. Use the undo send-number command to restore the default mode. Syntax send-number { digit-number | all | truncate } undo send-number Parameters digit-number Number of least significant digits that are sent. Valid values are 0 to 31.
254 ● send-number (in Voice Subscriber-Line View) 3Com Router 5000 Family and Router 6000 Family Command Reference send-number (in Voice Subscriber-Line View) Purpose Use the send-number command to configure the FXS voice subscriber-line to allow the FXS to send called numbers. Use the undo send-number command to disable the FXS to send called numbers. Syntax send-number undo send-number Parameters None Default By default, the FXS is disabled to send called numbers.
3Com Router 5000 Family and Router 6000 Family Command Reference send-ring ● 255 send-ring Purpose Use the send-ring command to enable the local end to play ringback tone. Use the undo send-ring command to disable the local end to play ringback tone. Syntax send-ring undo send-ring Parameters None Default By default, the local end does not play ringback tone. Example Enable the local end to play ringback tone.
256 ● sendring 3Com Router 5000 Family and Router 6000 Family Command Reference sendring Purpose Use the sendring command to enable or disable the terminating point to send ring-back tone or busy tone signal to the calling party. Syntax sendring { ringback | ringbusy } { enable | disable } Parameters ringback { enable | disable } Enables/disables the sending of ring-back signal. ringbusy { enable | disable } Enables/disables the sending of ring-busy signal.
3Com Router 5000 Family and Router 6000 Family Command Reference seq-number ● 257 seq-number Purpose Use the seq-number command to enable voice packets transmitted on the local gateway to carry sequence numbers. Use the undo seq-number command to disable voice packets to carry sequence numbers. Syntax seq-number undo seq-number Parameters None Default By default, no sequence numbers are carried in voice packets.
258 ● shutdown (in Voice Entity View) 3Com Router 5000 Family and Router 6000 Family Command Reference shutdown (in Voice Entity View) Purpose Use the shutdown command in voice entity view to configure to change the management status of specified voice entity from UP to DOWN. Use the undo shutdown command in voice entity view to restore the voice entity management status from DOWN to UP. Syntax shutdown undo shutdown Parameters None Default By default, the voice entity management status is UP.
3Com Router 5000 Family and Router 6000 Family Command Reference shutdown (in Voice Subscriber-Line View) ● 259 shutdown (in Voice Subscriber-Line View) Purpose Use the shutdown command in voice subscriber-line view to configure the voice subscriber-line from UP to DOWN. Use the undo shutdown command in voice subscriber-line to restore the voice subscriber-line from DOWN to UP. Syntax shutdown undo shutdown Parameters None Default By default, the voice subscriber-line status is UP.
260 ● signal-value 3Com Router 5000 Family and Router 6000 Family Command Reference signal-value Purpose Use the signal-value command to configure the digital E&M subscriber-line to receive and transmit the ABCD bits of idle signaling and seizure signaling. Use the undo signal-value command to restore the bits of the corresponding signaling to the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference silence-th-span ● 261 silence-th-span Purpose Use the silence-th-span command to set the silence detection parameters that have the system take automatic on-hook action. Use the undo silence-th-span command to restore the default. Syntax silence-th-span threshold time-length undo silence-th-span Parameters Example threshold Silence detection threshold.
262 ● sip 3Com Router 5000 Family and Router 6000 Family Command Reference sip Purpose Use the sip command to access SIP client view. Syntax sip Parameters None Example Access SIP client view. [Router-voice] sip [Router-voice-sip] View This command can be used in the following views: ■ Description Voice view Before you can configure a SIP client, you should first access the appropriate SIP client view.
3Com Router 5000 Family and Router 6000 Family Command Reference sip-comp ● 263 sip-comp Purpose Use the sip-comp command to configure a SIP compatibility option. Use the undo sip-comp command to restore the default setting of a SIP compatibility option. Syntax sip-comp { callee | from | server } undo sip-comp { callee | from | server } Parameters Example callee Extracts the called number from the To field.
264 ● sip-domain 3Com Router 5000 Family and Router 6000 Family Command Reference sip-domain Purpose Use the sip-domain command to configure the domain name of a SIP server. Use the undo sip-domain command to delete the domain name of the SIP server. Syntax sip-domain domain-name undo sip-domain Parameters domain-name Default By default, a SIP server is identified by its IP address instead of domain name. Example Configure a SIP server’s domain name hello.com. Domain name of the SIP server.
3Com Router 5000 Family and Router 6000 Family Command Reference sip-id ● 265 sip-id Purpose Use the sip-id command to set ID of the local gateway and configure its SIP authentication password. Use the undo sip-id command to restore the default. Syntax sip-id id password { simple | cipher } password undo sip-id Parameters id SIP ID of router, which is a case sensitive character string in the range 1 to 31 and defaults to VRP-GATEWAY.
266 ● sip-server 3Com Router 5000 Family and Router 6000 Family Command Reference sip-server Purpose Use the sip-server command to configure address information of SIP proxy server and define call requests that can be accepted. Use the undo sip-server command to restore the default. Syntax sip-server { master | slaver } ip-address port port-number [ inbound | all ] undo sip-server Parameters master Master proxy server. slaver Slave proxy server. ip-address IPv4 address.
3Com Router 5000 Family and Router 6000 Family Command Reference slic-gain ● 267 slic-gain Purpose Use the slic-gain command to configure the output gain of the SLIC chip. Use the undo slic-gain command to restore the default or 0. Syntax slic-gain { 0 | 1 } undo slic-gain Parameters Example 0 Sets the output gain of the subscriber line interface circuit (SLIC) chip to 0.8 dB (the default). 1 Sets the output gain of the SLIC chip to 2.1 dB (the default).
268 ● source-ip 3Com Router 5000 Family and Router 6000 Family Command Reference source-ip Purpose Use the source-ip command to bind a source IP address to the gateway when it functions as a User Agent (UA). Syntax source-ip ip-address undo source-ip Parameters ip-address Default By default, no SIP source IP address is configured. Example Set the local source address to 1.1.1.1. IPv4 address. [Router-voice-sip] source-ip 1.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference special-character ● 269 special-character Purpose Use the special-character command to configure the supported special characters during register signal exchange. Syntax special-character character number Parameters character A special character, which can be #, *, A, B, C, or D. number Code of the register signal, ranging from 11 to 15. Default By default, no special character is configured.
270 ● special-service 3Com Router 5000 Family and Router 6000 Family Command Reference special-service Purpose Use the special-service command to enable or disable the special-service numbers. Syntax special-service enable undo special-service enable Parameters enable Default By default, the special-service numbers are disabled. Example Enable the special-service numbers. Enable the special-service numbers. All special-service numbers are enabled.
3Com Router 5000 Family and Router 6000 Family Command Reference subscriber-line ● 271 subscriber-line Purpose Use the subscriber-line command to enter FXS, FXO, analog E&M, or digital E1/T1 voice subscriber-line view. Syntax subscriber-line line-number Purpose line-number Example Enter the view of the voice subscriber line 0/0/0 in voice view. Subscriber line number.
272 ● subscriber-line 3Com Router 5000 Family and Router 6000 Family Command Reference subscriber-line Purpose Use the subscriber-line command to enter the voice subscriber-line view. Syntax subscriber-line slot-number: { ts-set-number | 15 } subscriber-line slot-number: 23 Parameters Example slot-number Indicate the subscriber line number generated in creating Timeslot set or ISDN PRI set, determined by the slot number of the E1V1 module.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ timeslot-set ■ pri-set subscriber-line ● 273
274 ● substitute 3Com Router 5000 Family and Router 6000 Family Command Reference substitute Purpose Use the substitute command to bind the calling/called number-substitute list to the voice subscriber-line or voice entity. Use the undo substitute command to delete the calling/called number-substitute list that is bound to the voice subscriber-line or voice entity.
3Com Router 5000 Family and Router 6000 Family Command Reference Related Commands ■ number-substitute ■ rule substitute ● 275
276 ● substitute incoming-call 3Com Router 5000 Family and Router 6000 Family Command Reference substitute incoming-call Purpose Use the substitute incoming-call command to bind the calling/called numbers of the incoming calls from the network side to the number-substitute list. Use the undo substitute incoming-call command to cancel the binding.
3Com Router 5000 Family and Router 6000 Family Command Reference substitute incoming-call ● 277 2. The system searches all the rules in the number-substitute lists in order, and it stops the search once one rule works. According to network requirements, before voice entities are matched, you can use the substitute incoming-call command in the voice dial program view to substitute all the calling/called numbers of the incoming calls from the network side.
278 ● substitute outgoing-call 3Com Router 5000 Family and Router 6000 Family Command Reference substitute outgoing-call Purpose Use the substitute outgoing-call command to bind the calling/called numbers of the outgoing calls from the network side to the number-substitute list. Use the undo substitute outgoing-call command to cancel the binding.
3Com Router 5000 Family and Router 6000 Family Command Reference substitute outgoing-call ● 279 2. The system searches all the rules in the number-substitute lists in order, and it stops the search once one rule works. According to network requirements, before voice entities are matched, you can use the substitute outgoing-call command in the voice dial program view to substitute all the calling/called numbers of the outgoing calls from the network side.
280 ● terminator 3Com Router 5000 Family and Router 6000 Family Command Reference terminator Purpose Use the terminator command to configure a special character string as the terminator of a telephone number whose length is variable. Use the undo terminator command to cancel the existing setting. Syntax terminator character undo terminator Parameters character Default By default, no terminator is configured. Example Configure using “#” as a terminator. Telephone number terminator.
3Com Router 5000 Family and Router 6000 Family Command Reference timer-dial-interval ● 281 timer-dial-interval Purpose Use the timer dial-interval command to configure the timer that the system waits for a subscriber to dial the next digit. Use the undo timer dial-interval command to restore the default time settings. Syntax timer dial-interval seconds undo timer dial-interval Parameters seconds Example Set the maximum duration waiting for the next digit on voice line 0/0/0 to 5 seconds.
282 ● timer (Digital E&M) 3Com Router 5000 Family and Router 6000 Family Command Reference timer (Digital E&M) Purpose Use the timer command to configure the timeout values of the signals in the digital E&M signaling. Use undo timer command to restore them to defaults.
3Com Router 5000 Family and Router 6000 Family Command Reference timer dl (R2) ● 283 timer dl (R2) Purpose Use the timer dl command to configure the timeout value of line signals of R2 signaling. Use the undo timer dl command to restore the default value. This command applies to E1 voice only.
284 ● timer dl (R2) 3Com Router 5000 Family and Router 6000 Family Command Reference If no value is specified, the default is 1000 milliseconds. release-guard time Example Timeout interval of R2 release guard signal (in milleseconds). When the originating point sends a clear-forward signal, the terminating point should send a release guard signal in the specified time after it sends back a clear-back signal. Valid values are 100 to 60000 milliseconds.
3Com Router 5000 Family and Router 6000 Family Command Reference timer dtmf (R2) ● 285 timer dtmf (R2) Purpose Use the timer dtmf command to configure the time interval for sending DTMF signals. Use the undo timer dtmf command to restore the default value. Syntax timer dtmf time undo timer dtmf Parameters time Example Configure the R2 signaling to send a DTMF signal 800 milliseconds after the reception of the seizure acknowledgement signal.
286 ● timer first-dial 3Com Router 5000 Family and Router 6000 Family Command Reference timer first-dial Purpose Use the timer first-dial command to configure the timer that the system waiting for a subscriber to dial the first digit. Use the undo timer first-dial command to restore the default time settings. Syntax timer first-dial seconds undo timer first-dial Parameters seconds Example Set the maximum duration waiting for the first dial on voice line 0/0/0 to 10 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference timer register-complete (R2) ● 287 timer register-complete (R2) Purpose Use the timer register-complete command to configure the timeout value for register signals of R2 signaling. Use the undo timer register-complete command to restore the default value. This command applies to E1 voice only.
288 ● timer register-pulse (R2) 3Com Router 5000 Family and Router 6000 Family Command Reference timer register-pulse (R2) Purpose Use the timer pulse command to configure the persistence time of the register pulse signal of R2 signaling (A3, A4 and A6, etc.). Use the undo timer pulse command to restore the default value.
3Com Router 5000 Family and Router 6000 Family Command Reference timer ring (R2) ● 289 timer ring (R2) Purpose Use the timer ring command to configure the maximum time range before the signal tone of R2 signaling is sent. Use the undo timer ring command to restore it to the default value. This command applies to E1 voice only.
290 ● timer ring-back 3Com Router 5000 Family and Router 6000 Family Command Reference timer ring-back Purpose Use the timer ring-back command to configure the maximum duration for the system to send the ringback tone. Use the undo timer ring-back command to restore the default. Syntax timer ring-back seconds undo timer ring-back Purpose seconds Example Set the maximum time duration for the system to send ringback tone to eight seconds. Maximum duration of ringback tone (in seconds).
3Com Router 5000 Family and Router 6000 Family Command Reference timer wait-digit ● 291 timer wait-digit Purpose Use the timer wait-digit command to configure the maximum time duration that the system waits for a digit. Use the undo timer wait-digit command to restore the default time settings. Syntax timer wait-digit { infinity | seconds } undo timer wait-digit Parameters Example infinity Infinite time. seconds The maximum duration waiting for a digit, in the range 3 to 600 seconds.
292 ● timeslot-set 3Com Router 5000 Family and Router 6000 Family Command Reference timeslot-set Purpose Use the timeslot-set command to configure the timeslot set to perform R2 signaling and digital E&M signaling configurations. Use the undo timeslot-set command to cancel the specified timeslot set.
3Com Router 5000 Family and Router 6000 Family Command Reference Description timeslot-set ● 293 Use the timeslot-set command to configure the timeslot set to perform R2 signaling and digital E&M signaling configurations. Use the undo timeslot-set command to cancel the specified timeslot set. This command applies to E1 voice only.
294 ● timestamp 3Com Router 5000 Family and Router 6000 Family Command Reference timestamp Purpose Use the timestamp command to enable the local end to send voice packets with timestamps. Use the undo timestamp command to disable voice packets to carry timestamps. Syntax timestamp undo timestamp Parameters None Default By default, voice packets do not carry timestamps. Example Enable voice packets to carry timestamps in VoFR voice entity 10.
3Com Router 5000 Family and Router 6000 Family Command Reference trace interval ● 295 trace interval Purpose Use the trace interval command to configure the interval for information recording in the debugging process, that is, the number of voice packets upon the pass of which a record will be made. Use the undo trace interval command to restore the default. Syntax trace interval packets undo trace interval Parameters packets Example Record debugging information for every 300 voice packets.
296 ● transmit gain 3Com Router 5000 Family and Router 6000 Family Command Reference transmit gain Purpose Use the transmit gain command to configure the voice subscriber-line output end gain value. Use the undo transmit gain command to restore the default value. Syntax transmit gain value undo transmit gain Parameters value Example Configure the voice output gain value as -6.7dB on subscriber line 0/0/0 Voice output gain ranging -14.0 to 14.0 in dB with one digit after the decimal point.
3Com Router 5000 Family and Router 6000 Family Command Reference trunk-direction ● 297 trunk-direction Purpose Use the trunk-direction command to configure the E1 trunk direction. Use the undo trunk-direction command to restore the default value. Syntax trunk-direction timeslots timeslots-list { in | out | dual } undo trunk-direction timeslots timeslots-list Parameters timeslots-list Specify the range of trunk timeslot.
298 ● trunk-direction 3Com Router 5000 Family and Router 6000 Family Command Reference trunk selection policy to avoid the simultaneous hold of timeslot by the two sides of communication. In configuration avoid that one end is bidirectional trunk while the other end is outgoing trunk, or the call from the end configured as the bidirectional trunk will always fail.
3Com Router 5000 Family and Router 6000 Family Command Reference trunk-id ● 299 trunk-id Purpose Use the trunk-id command to configure the number that the local end dials to call the PSTN side in FRF.11 trunk mode. Use the undo trunk-id command to restore the local called number to null. Syntax trunk-id string undo trunk-id Parameters string Default By default, no number is configured, that is means the parameter string is null.
300 ● ts 3Com Router 5000 Family and Router 6000 Family Command Reference ts Purpose Use the ts command to maintain the trunk circuit of the specified timeslot. Syntax ts { block | open | query | reset } timeslots timeslots-list Parameters block Indicate blocking the trunk circuit of the specified timeslot. open Indicate opening the trunk circuit of the specified timeslot. query Indicate querying the trunk circuit of the specified timeslot.
3Com Router 5000 Family and Router 6000 Family Command Reference ts ● 301 automatically and correctly because of other reasons,, it is generally required to reset manually the circuit, too.
302 ● tunnel-on 3Com Router 5000 Family and Router 6000 Family Command Reference tunnel-on Purpose Use the tunnel-on command to enable tunnel function. Use the undo tunnel-on command to disable tunnel function. Syntax tunnel-on undo tunnel-on Parameters None Default By default, the tunnel function is disabled. Example Enable the tunnel function for VoIP voice entity 10.
3Com Router 5000 Family and Router 6000 Family Command Reference type ● 303 type Purpose Use the type command to configure the analog E&M subscriber-line signal type. Use the undo type command to cancel the existing setting. Syntax type { 1 | 2 | 3 | 5 } undo type Purpose 1, 2, 3 and 5 Default By default, the analog E&M subscriber-line signal type is type 5. Example Configure subscriber line 0/0/0 analog E&M subscriber-line type as type 3.
304 ● type-number 3Com Router 5000 Family and Router 6000 Family Command Reference type-number Purpose Use the type-number command to configure the calling/called number types of voice entities. Use the undo type-number command to restore the default number types. Syntax type-number { called | calling } { abbreviated | international | national | network | reserved | subscriber | unknown } undo type-number { called | calling } Parameters called Called number. calling Calling number.
3Com Router 5000 Family and Router 6000 Family Command Reference vad-on ● 305 vad-on Purpose Use the vad-on command to enable voice activity detection (VAD). Use the undo vad-on command to disable VAD. Syntax vad-on undo vad-on Parameters None Default By default, the silence detection function is disabled. Example Enable VAD for VoFR voice entity 2.
306 ● vad-on 3Com Router 5000 Family and Router 6000 Family Command Reference vad-on Purpose Use the vad-on command to enable silence detection function. Use the undo vad-on command to disable silence detection function. Syntax vad-on undo vad-on Parameters None Default By default, the silence detection function is disabled. Example Enable the VAD function of POTS voice entity 10.
3Com Router 5000 Family and Router 6000 Family Command Reference vi-card busy-tone-detect ● 307 vi-card busy-tone-detect Purpose Use the vi-card busy-tone-detect command to configure busy tone detection method on FXO subscriber-line. Syntax vi-card busy-tone-detect { auto index line-number [ free | time ] | custom area-number index argu f1 f2 p1 p2 p3 p4 p5 p6 p7 } undo vi-card busy-tone-detect custom index Parameters Example Index Identify busy tone detection feature types, in the range 0 to 3.
308 ● vi-card busy-tone-detect Description 3Com Router 5000 Family and Router 6000 Family Command Reference This command is only valid for FXO subscriber-lines, and can only be configured on the first subscriber-line of each two-subscriber-line voice board or four-subscriber-line voice board. Otherwise, the busy tone detection is not valid. The system supports four types of busy tone detection features, which are identified by the index parameter.
3Com Router 5000 Family and Router 6000 Family Command Reference vi-card cptone-custom ● 309 vi-card cptone-custom Purpose Use the vi-card cptone-custom command to set the prompt tone parameters of the system. Use the undo vi-card cptone-custom command to delete the prompt tone parameters.
310 ● vi-card cptone-custom Example 3Com Router 5000 Family and Router 6000 Family Command Reference Set the busy tone papmeters, 425Hz in single frequency, and the on or off duration is 350ms. [Router-voice] vi-card cptone-custom busy-tone 0 425 425 350 350 350 350 View This command can be used in the following views: ■ Description Voice view After the configuration of the prompt tone parameters, these parameters cannot take effect immediately.
3Com Router 5000 Family and Router 6000 Family Command Reference vi-card custom-toneparam ● 311 vi-card custom-toneparam Purpose Use the vi-card custom-toneparam command to save DSP parameters and customize busy tone detection parameters on the FXO interface. Use the undo vi-card custom-toneparam command to restore the custom default busy-tone detection settings on the FXO interface.
312 ● vi-card custom-toneparam Description 3Com Router 5000 Family and Router 6000 Family Command Reference When detecting the busy tone on the FXO interface after the vi-card busy-tone-detect command is run, the system can calculate busy tone detection-related parameters. You can view these parameters, which can be referred to in your customization of these parameters, with the display current-configuration command.
3Com Router 5000 Family and Router 6000 Family Command Reference vi-card reboot ● 313 vi-card reboot Purpose Use the vi-card reboot command to reboot a voice card. Syntax vi-card reboot slot-number Parameters slot-number Example Reset the voice card of slot 3. Slot number where the voice card is located.
314 ● vofr 3Com Router 5000 Family and Router 6000 Family Command Reference vofr Purpose Use the vofr command to enable VoFR operation mode for a DLCI. Use the undo vofr command to disable VoFR operation mode for the DLCI.
3Com Router 5000 Family and Router 6000 Family Command Reference vofr ● 315 Specify voice call mode on dlci 300 to Motorola-compatible (DCE). [Router-fr-dlci-Serial1/0/0-100] vofr motorola-compatible dce View This command can be used in the following views: ■ Description DLCI view If call-mode static has been configured to use FRF.11 trunk mode, configuring Motorola-compatible mode in this command will cause session failure.
316 ● vofr frf11-timer 3Com Router 5000 Family and Router 6000 Family Command Reference vofr frf11-timer Purpose Use the vofr frf11-timer command to configure the interval of Trunk Wait timer in FRF.11 trunk mode. Syntax vofr frf11-timer time Parameters time Example Set the period of the Trunk Wait timer in FRF.11 trunk mode to 40 seconds. Interval of Trunk Wait timer (in seconds). Valid values are 10 to 600. If no value is specified, the default interval is 30 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference vofr jitter-buffer ● 317 vofr jitter-buffer Purpose Use the vofr jitter-buffer command to configure a jitter buffer length. Syntax vofr jitter-buffer length Parameters length Example Set the length of jitter buffer to 5. Jitter buffer length. Valid values are 0 to 8. If it is set to 0, jitter buffer will not be used. If no value is specified, the default jitter buffer length is 0.
318 ● voip call-start 3Com Router 5000 Family and Router 6000 Family Command Reference voip call-start Purpose Use the voip call-start command to configure a call initialization mode for the called GW. Use the undo voip call-start command to restore the default. Syntax voip call-start { fast | normal } undo voip call-start Parameters fast The called GW initializes calls in a fast way. normal The called GW initializes calls in a non-fast way. Default By default, the fast mode is used.
3Com Router 5000 Family and Router 6000 Family Command Reference voip calledtunnel ● 319 voip calledtunnel Purpose Use the voip calledtunnel enable command to enable the tunnel function on the called gateway. Use the undo voip calledtunnel enable command to disable the tunnel function on the called gateway. Syntax voip calledtunnel enable undo voip calledtunnel enable Parameters enable Default By default, the tunnel function on the called gateway is enabled.
320 ● voice bandwidth 3Com Router 5000 Family and Router 6000 Family Command Reference voice bandwidth Purpose Use the voice bandwidth command to configure maximum bandwidth for voice calls. Use the undo voice bandwidth command to restore the default. Syntax voice bandwidth reserved-bps [ reserved ] undo voice bandwidth Parameters reserved-bps Maximum bandwidth for voice calls. Valid values are 8000 kbps to 45,000,000 kbps. reserved Reserves bandwidth for a call until it is terminated.
3Com Router 5000 Family and Router 6000 Family Command Reference voice-setup ● 321 voice-setup Purpose Use the voice-setup command to enter voice view and enable voice services. Use the undo voice-setup command to disable all voice services. Syntax voice-setup undo voice-setup Parameters None Default By default, all voice services are disabled. Example Enter voice view and enable voice services. [3Com ] voice-setup Starting voice service, please waiting......
322 ● voip h323-conf tcs-t38 3Com Router 5000 Family and Router 6000 Family Command Reference voip h323-conf tcs-t38 Purpose Use the voip h323-conf tcs-t38 command to enable the voice gateway to include the T.38 capability description in its capability set when it is in H.323 slow-start mode. Use the undo voip h323-conf tcs-t38 command to disable the voice gateway to include the T.38 capability description in its capability set when it is in H.323 slow-start mode.
3Com Router 5000 Family and Router 6000 Family Command Reference voip h323-descriptor ● 323 voip h323-descriptor Purpose Use the voip h323-descriptor command to configure the description character string of the voice gateway H.323. Syntax voip h323-descriptor descriptor undo voip h323-descriptor Parameters descriptor Example Configure the descriptor of H.323 as “mystring”. The description character string of H.323, in the length of 1 to 64. By default, the descriptor is "Vrp Gateway".
324 ● voip timer 3Com Router 5000 Family and Router 6000 Family Command Reference voip timer Purpose Use the voip timer command to set the VoIP-to-POTS timer, or the delay waiting for switching from VoIP entity to backup POTS entity after a VoIP call is failed. Use the undo voip timer command to restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference vqa data-statistic ● 325 vqa data-statistic Purpose Use the vqa data-statistic command to enable counting of voice data. Use the undo vqa data-statistic enable command to disable counting of voice data. Syntax vqa data-statistic enable undo vqa data-statistic enable Parameters enable Default By default, counting of voice data is disabled. Example Enable counting of voice data. Enables counting of voice data.
326 ● vqa dscp 3Com Router 5000 Family and Router 6000 Family Command Reference vqa dscp Purpose Use the vqa dscp command to set the global DSCP value in the ToS field in the IP packets that carry the RTP stream or voice signaling. Use the undo dscp media command to restore the default DSCP, that is, default. Syntax vqa dscp { media | signal } dscp-value undo vqa dscp { media | signal } Parameters media Global DSCP value in the ToS field of the IP packets that carry RTP streams.
3Com Router 5000 Family and Router 6000 Family Command Reference Description vqa dscp ● 327 The function of this command is the same as the command used for setting DSCP in the “QoS” part of this manual. If two DSCP values are configured, the one configured in the “QoS” part takes priority. This command is valid for both SIP and H.323.
328 ● vqa dsp-monitor 3Com Router 5000 Family and Router 6000 Family Command Reference vqa dsp-monitor Purpose Use the vqa dsp-monitor command to set duration for DSP buffer data monitoring. Use the undo vqa dsp-monitor buffer-time command to remove the setting. Syntax vqa dsp-monitor buffer-time time undo vqa dsp-monitor buffer-time Parameters buffer-time time Default By default, DSP data is not monitored. Example Set the duration for DSP buffer data monitoring to 270 milliseconds.
3Com Router 5000 Family and Router 6000 Family Command Reference vqa jitter-buffer ● 329 vqa jitter-buffer Purpose Use the vqa jitter-buffer command to configure jitter buffer depth. Use the vqa jitter-buffer command to restore the default jitter buffer depth. Syntax vqa jitter-buffer depth undo vqa jitter-buffer Parameters depth Example Configure the depth of jitter buffer as 5. Identify the jitter buffer depth. Valid values are 0 to 10.
330 ● wildcard-register enable 3Com Router 5000 Family and Router 6000 Family Command Reference wildcard-register enable Purpose Use the wildcard-register enable command to enable fuzzy (wildcard) telephone number registration. Use the undo wildcard-register command to disable fuzzy (wildcard) telephone number registration. Syntax wildcard-register enable undo wildcard-register Parameters None Default By default, fuzzy telephone number registration is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 NON-IP ARCHITECTURE ALPHABETICAL LISTING OF COMMANDS bridge set (in synchronous serial interface view) 5 bridge-set (in Ethernet Interface view) 6 clns enable 7 clns net 8 clns erpacket enable 9 clns erpacket interval 10 clns es-peer 11 clns rdpacket enable 12 clns rdpacket interval 13 clns route-static 14 clns timer rdpacket holding 15 code nrzi 16 debugging dlsw 17 debugging dlsw ethernet-backup 18 debugging dlsw filter 20 debugging dl
2● 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw information 60 display dlsw information 62 display dlsw reachable-cache 64 display dlsw reachable-cache 65 display dlsw ethernet-backup map 66 display dlsw ethernet-backup neighbour 67 display dlsw remote 68 display dlsw remote 69 display fr map-info 70 display esis 71 display esis interface 72 display esis peer 73 display esis statistics 74 display ipx interface 75 display ipx routing-table 77 display ipx routing-table stati
3Com Router 5000 Family and Router 6000 Family Command Reference ipx route-static 124 ipx sap disable 126 ipx sap gns-disable-reply 127 ipx sap gns-load-balance 128 ipx sap max-reserve-servers 129 ipx sap mtu 130 ipx sap multiplier 131 ipx sap timer update 132 ipx service 133 ipx split-horizon 135 ipx tick 136 ipx update-change-only 137 isis enable clns 138 link-protocol sdlc 139 llc2 max-ack 140 llc2 max-send-queue 141 llc2 max-transmission 142 llc2 modulo 143 llc2 receive-window 144 llc2 timer ack 145 ll
4● 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc timer ack 178 sdlc window 179 sdlc xid 180 timer configuration 181 timer holding 182 tracert clns 183 x25 map clns 185 x25 default-protocol 187 x25 pvc 188
3Com Router 5000 Family and Router 6000 Family Command Reference bridge set (in synchronous serial interface view) ● 5 bridge set (in synchronous serial interface view) Purpose Use the bridge-set (in Synchronous serial interface system view) command to add the synchronous serial interface encapsulated into SDLC into the bridge group. Use the undo bridge-set (in synchronous serial interface view) command to delete the interface from the DLSw bridge group.
6 ● bridge-set (in Ethernet Interface view) 3Com Router 5000 Family and Router 6000 Family Command Reference bridge-set (in Ethernet Interface view) Purpose Use the bridge-set (in the Ethernet Interface view) command to add the Ethernet interface into the bridge. Use the undo bridge-set (in the Ethernet Interface view) command to delete the interface from the DLSw bridge group.
3Com Router 5000 Family and Router 6000 Family Command Reference clns enable ● 7 clns enable Purpose Use the clns enable command to enable CLNS. Use the undo clns enable command to disable CLNS. Syntax clns enable undo clns enable Parameters None Example Enable CLNS forwarding. <3Com > system-view System View: return to User View with Ctrl+Z. [3Com ] clns enable CLNS is enabled View This command can be used in the following views: ■ Description System view CLNS is disabled by default.
8 ● clns net 3Com Router 5000 Family and Router 6000 Family Command Reference clns net Purpose Use the clns net command to assign an NET address to the IS. Use the undo clns net command to remove the NET address of the IS. Syntax clns net address undo clns net address Parameters address Example Assign an NET address of 47.0001.1921.6800.1024.00 to an IS. Network entity title of the IS in hexadecimal form. This argument can be 8 to 20 bytes in length and must end with 00.
3Com Router 5000 Family and Router 6000 Family Command Reference clns erpacket enable ● 9 clns erpacket enable Purpose Use the clns erpacket enable command to enable generation of error report packets. Use the undo clns erpacket enable command to disable generation of error report packets. Syntax clns erpacket enable undo clns erpacket enable Parameters None Default Generation of error report packets is enabled by default. Example Enable generation of error report packets.
10 ● clns erpacket interval 3Com Router 5000 Family and Router 6000 Family Command Reference clns erpacket interval Purpose Use the clns erpacket interval command to set the minimum interval to generate two successive error report packets. Use the undo clns erpacket interval command to restore to the default minimum interval to generate two successive error report packets.
3Com Router 5000 Family and Router 6000 Family Command Reference clns es-peer ● 11 clns es-peer Purpose Use the clns es-peer command to configure a static neighboring ES. Use the undo clns es-peer command to remove a specified neighboring ES. Syntax clns es-peer NSAP interface-type interface-number [ SNPA ] undo clns es-peer { NSAP [ interface-type interface-number ] | all } Parameters NSAP interface-type interface-number Example Address of the static neighboring ES in the format of ##.####. ... .
12 ● clns rdpacket enable 3Com Router 5000 Family and Router 6000 Family Command Reference clns rdpacket enable Purpose Use the clns rdpacket enable command to enable the router to send RD packets. Use the undo clns rdpacket enable command to disable the router to send RD packets. Syntax clns rdpacket enable undo clns rdpacket enable Parameters None Example Enable a router to send RD packets. <3Com > system-view System View: return to User View with Ctrl+Z.
3Com Router 5000 Family and Router 6000 Family Command Reference clns rdpacket interval ● 13 clns rdpacket interval Purpose Use the clns rdpacket interval command to set the minimum interval to generate RD packets. Use the undo clns rdpacket interval command to revert to the default minimum interval to generate RD packets. Syntax clns rdpacket interval milliseconds undo clns rdpacket interval Parameters milliseconds Example Set the minimum interval to generate RD packets to 200 milliseconds.
14 ● clns route-static 3Com Router 5000 Family and Router 6000 Family Command Reference clns route-static Purpose Use the clns route-static command to configure a static OSI route. Use the undo clns route-static command to remove a static OSI route.
3Com Router 5000 Family and Router 6000 Family Command Reference clns timer rdpacket holding ● 15 clns timer rdpacket holding Purpose Use the clns timer rdpacket holding command to set the holding time of the information a RD packet carries. Use the undo clns timer rdpacket holding command to revert to the default holding time.
16 ● code nrzi 3Com Router 5000 Family and Router 6000 Family Command Reference code nrzi Purpose Use the code nrzi command to configure the NRZI encoding of the synchronous serial port. Use the undo code nrzi command to remove the NRZI encoding of the synchronous serial port. Syntax code nrzi undo code Parameters None Default By default, the NRZ encoding is configured on the synchronous serial port. Example Configure the NRZI encoding on the Serial1/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw ● 17 debugging dlsw Purpose Use the debugging dlsw command to enable DLSw debugging. Use the undo debugging dlsw command to disable DLSw debugging. Syntax debugging dlsw { circuit [ correlator ] | tcp [ ip-address ] | reachable-cache } undo debugging dlsw { circuit [ correlator ] | tcp [ ip-address ] | reachable-cache } Parameters Example circuit Enables the DLSw circuit debugging.
18 ● debugging dlsw ethernet-backup 3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw ethernet-backup Purpose Use the debugging dlsw ethernet-backup command to enable debugging for DLSw Ethernet redundancy. Use the undo debugging dlsw ethernet-backup command to disable debugging for DLSw Ethernet redundancy. Syntax debugging dlsw ethernet-backup undo debugging dlsw ethernet-backup Parameters None Example Enable debugging for DLSw Ethernet redundancy.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw ethernet-backup ● 19 Table 1 Description on the fields of debugging dlsw ethernet-backup Field Description A LLC2 circuit is created! An LLC circuit is created between the two routers. receive UA frame from Ethernet 3/0/1 Ethernet 3/0/1 receives a UA response. SABMESENT -> CONNECT The status of the DLSw Ethernet redundancy circuit changes from SABMESENT to CONNECT.
20 ● debugging dlsw filter 3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw filter Purpose Use the debugging dlsw filter command to enable debugging for DLSw filtering. Use the undo debugging dlsw filter command to disable debugging for DLSw filtering. Syntax debugging dlsw filter undo debugging dlsw filter Parameters None Example Enable debugging for DLSw filtering.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw packet ● 21 debugging dlsw packet Purpose Use the debugging dlsw packet command to enable SSP packet debugging for DLSw. Use the undo debugging dlsw packet command to disable SSP packet debugging for DLSw. Syntax debugging dlsw packet [ receive [ip-address] | send [ip-address] ] undo debugging dlsw packet [ receive [ip-address] | send [ip-address] ] Parameters receive Enables debugging for inbound SSP packets.
22 ● debugging dlsw packet Description 3Com Router 5000 Family and Router 6000 Family Command Reference Table 3 Description on the fields of the debugging dlsw packet command Field Description DLSW_PACKET 4.4.4.2 ( The DLSw sends switch-to-switch protocol (SSP) packets over the TCP Output) TCP connection to the remote peer 4.4.4.2. DLSW_PACKET 4.4.4.2 ( The DLSw receives SSP packets over the TCP connection from the TCP Input) remote peer 4.4.4.2. DLSW_PACKET 4.4.4.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw reachable-cache ● 23 debugging dlsw reachable-cache Purpose Use the debugging dlsw reachable-cache command to enable DLSw reachability debugging. Use the undo debugging dlsw reachable-cache command to disable DLSw reachability debugging. Syntax debugging dlsw reachable-cache undo debugging dlsw reachable-cache Parameters None Example Enable DLSw reachability debugging.
24 ● debugging dlsw reachable-cache View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ User view
3Com Router 5000 Family and Router 6000 Family Command Reference debugging dlsw udp ● 25 debugging dlsw udp Purpose Use the debugging dlsw udp command to enable UDP packet debugging for DLSw. Use the undo debugging dlsw udp command to disable UDP packet debugging for DLSw. Syntax debugging dlsw udp undo debugging dlsw udp Parameters None Example Enable UDP packet debugging for DLSw2.0.
26 ● debugging dlsw udp 3Com Router 5000 Family and Router 6000 Family Command Reference Table 5 Description on the fields of the debugging dlsw udp command Field Description DLSW_UDP: Send UDP to remote peer 192.168.10.20 Unicasted a UDP packet to the remote peer (192.168.10.20). DLSW_UDP: Remote peer’s status is wrong The remote peer is in a wrong connection state. DLSW_UDP: The The packet that needs sending is illegitimate. sending packet is wrong DLSW_UDP: Send a multicast packet to 224.0.10.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging llc2 ● 27 debugging llc2 Purpose Use the debugging llc2 command to enable the LLC2 debugging. Use the undo debugging llc2 command to disable the LLC2 debugging. Syntax debugging llc2 circuit [ correlator ] undo debugging llc2 circuit [ correlator ] Parameters correlator Example Enable LLC2 debugging. Distinguishes different IDs of the circuits.
28 ● debugging llc2 packet 3Com Router 5000 Family and Router 6000 Family Command Reference debugging llc2 packet Purpose Use the debugging llc2 packet command to enable U frame debugging for LLC2. Use the undo debugging llc2 packet command to disable U frame debugging for the LLC2. Syntax debugging llc2 packet undo debugging llc2 packet Parameters None Default By default, U frame debugging is disabled for the LLC2. Example Enable U frame debugging for the LLC2. <3Com > debugging llc2 packet *0.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging llc2 packet ● 29 Table 6 Description on the fields of the debugging dlsw packet command Field Description 04adc17a 00 00 e8 44 Packet contents. The first eight characters in each line define the 2c ac 00 04 ac de 07 a6 initial memory address, and the rest characters are packet contents. 00 03 04 04 Each line contains 16 packet content items.
30 ● debugging sdlc 3Com Router 5000 Family and Router 6000 Family Command Reference debugging sdlc Purpose Use the debugging sdlc command to enable the SDLC debugging. Use the undo debugging sdlc command to disable the SDLC debugging. Syntax debugging sdlc [ all | event | packet ] undo debugging sdlc { all | event | packet } Parameters Example all Enables all SDLC debugging. event Enables the SDLC event debugging. packet Enables the SDLC packet debugging. Enable SDLC event debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging hdlc clns ● 31 debugging hdlc clns Purpose Use the debugging hdlc clns command to enable debugging for HDLC OSI packets. Use the undo debugging hdlc clns command to disable debugging for HDLC OSI packets.
32 ● debugging ipx packet 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx packet Purpose Use the debugging ipx packet command to enable IPX packet debugging switch to view the contents of IPX packet received and transmitted. Use the undo debugging ipx packet command to disable the debugging switch. By default, IPX packet debugging switch is disabled.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx ping ● 33 debugging ipx ping Purpose Use the debugging ipx ping command to enable IPX Ping packet debugging switch to view the contents of Ping packet received and transmitted. Use the undo debugging ipx ping command to disable the debugging switch. Syntax debugging ipx ping undo debugging ipx ping Parameters None Default By default, IPX Ping packet debugging switch is disabled.
34 ● debugging ipx rtpro-flash 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx rtpro-flash Purpose Use the debugging ipx rtpro-flash command to turn on the debugging switch of route refreshing in the IPXRM module. Syntax debugging ipx rtpro-flash undo debugging ipx rtpro-flash Parameters None Example Switch on route refreshing debugging for IPXRM module. <3Com >debugging ipx rtpro-flash <3Com > Remove an IPX static route. [3Com ]undo ipx route-static b2 Serial 1 *0.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx rtpro-interface ● 35 debugging ipx rtpro-interface Purpose Use the debugging ipx rtpro-interface command to turn on the debugging switch of interface change in the IPXRM module. Use the undo debugging ipx rtpro-interface command to turn off the debugging switch of interface change in the IPXRM module.
36 ● debugging ipx rtpro-interface 3Com Router 5000 Family and Router 6000 Family Command Reference if_index is 0x286 . Interface name is Serial1 . [3Com -Serial1] View This command can be used in the following views: ■ Description User view Such debugging information is generated whenever IPXRM module receives interface change messages. These messages are generated when interface status changes between up and down, or interface is added or removed.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx rtpro-routing ● 37 debugging ipx rtpro-routing Purpose Use the debugging ipx rtpro-routing command to turn on the debugging switch of route change in the IPXRM module. Syntax debugging ipx rtpro-routing undo debugging ipx rtpro-routing Parameters None Example Switch on route change debugging for IPXRM module. <3Com >debugging ipx rtpro-routing <3Com > Add a static route [3Com ]ipx route-static d10 Serial 1 *0.
38 ● debugging ipx rip 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx rip Purpose Use the debugging ipx rip command to enable RIP debugging switch to view information on RIP packet received and transmitted, routing changes and timer expiry. Use the undo debugging ipx rip command to disable RIP debugging switch.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ User view debugging ipx rip ● 39
40 ● debugging ipx sap 3Com Router 5000 Family and Router 6000 Family Command Reference debugging ipx sap Purpose Use the debugging ipx sap command to enable IPX SAP debugging switch to view information on SAP packet received and transmitted, routing changes and timer expiry. Use the undo debugging ipx sap command to disable IPX SAP debugging switch.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Description debugging ipx sap ● 41 User view Enabling IPX SAP debugging switch, you can confirm whether SAP packet is received. Normally, a router or server sends out an SAP update packet every minute. By default, each SAP packet includes up to seven service information items at most.
42 ● debugging clns clnp 3Com Router 5000 Family and Router 6000 Family Command Reference debugging clns clnp Purpose Use the debugging clns clnp command to enable debugging for CLNS packets to display the contents of all received/transmitted CLNP packets. Use the undo debugging clns clnp command to disable debugging for CLNS packets. Syntax debugging clns clnp undo debugging clns clnp Parameters None Example Enable debugging for CLNS packets.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging clns echo ● 43 debugging clns echo Purpose Use the debugging clns echo command to enable debugging for Echo packets. Use the undo debugging clns echo command to disable debugging for Echo packets. Syntax debugging clns echo undo debugging clns echo Parameters None Default Debugging for Echo packets is disabled by default. Example Enable debugging for Echo packets.
44 ● debugging clns rd 3Com Router 5000 Family and Router 6000 Family Command Reference debugging clns rd Purpose Use the debugging clns rd command to enable debugging for RD packets. Use the undo debugging clns rd command to disable debugging for RD packets. Syntax debugging clns rd undo debugging clns rd Parameters None Example Enable debugging for RD packets.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging clns routing ● 45 debugging clns routing Purpose Use the debugging clns routing command to enable debugging for Layer 3 routing tables. Use the undo debugging clns routing command to disable debugging for Layer 3 routing tables. Syntax debugging clns routing undo debugging clns routing Parameters None Example Enable debugging for Layer 3 routing tables.
46 ● debugging esis 3Com Router 5000 Family and Router 6000 Family Command Reference debugging esis Purpose Use the debugging esis event command to enable debugging for ES-IS protocol-related events. You can display event information using this command, such as changes of neighbor states, entries in Level 0 routing table, and interface states. Use the undo debugging esis event command to disable debugging for ES-IS protocol-related events.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging isis es-adjacency ● 47 debugging isis es-adjacency Purpose Use the debugging isis es-adjacency command to enable debugging for IS-IS protocol-related events occur on neighboring ESs. Use the undo debugging isis es-adjacency command to disable debugging for IS-IS protocol-related events occur on neighboring ESs.
48 ● debugging isis is-adjacency 3Com Router 5000 Family and Router 6000 Family Command Reference debugging isis is-adjacency Purpose Use the debugging isis is-adjacency command to enable debugging for IS-IS protocol-related events occur on neighboring ISs. Use the undo debugging isis is-adjacency command to disable debugging for IS-IS protocol-related events occur on neighboring ISs.
3Com Router 5000 Family and Router 6000 Family Command Reference display atm map-info ● 49 display atm map-info Purpose Use the display atm map-info command to display upper layer protocol map information about a specified ATM interface. Syntax display atm map-info [ interface { interface-name | interface-type interface-num } [ pvc { pvc-name | vpi/vci } ] ] Parameters interface-name Name of the ATM interface.
50 ● display atm map-info Description 3Com Router 5000 Family and Router 6000 Family Command Reference If you do not specify an interface, then upper layer protocol map information about all ATM interfaces is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display clns ● 51 display clns Purpose Use the display clns command to display current CLNS information. Syntax display clns Parameters None Example Display current CLNS information. <3Com > display clns NET: 47.0000.0000.0000.0000.
52 ● display clns interface 3Com Router 5000 Family and Router 6000 Family Command Reference display clns interface Purpose Use the display clns interface command to display CLNS related information about a specified interface. Syntax display clns interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number.
3Com Router 5000 Family and Router 6000 Family Command Reference display clns routing-table ● 53 display clns routing-table Purpose Use the display clns routing-table command to display all active CLNS routes, including those in Level 0, Level 1, and Level 2 routing tables. Syntax display clns routing-table [ [ level-0 | level-1 | level-2 ] [ NSAP | verbose] ] | [ l2-cache ] Parameters NSAP Destination NSAP address, routes to which are to be displayed.
54 ● display clns routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference +0000.0000.280c Protocol:IS-IS Cost:20 *NextHop:0000.0000.028b SNPA:00e0.fc3a.5ee3 Interface:Ethernet1/0/1 Pre:15 +0000.0000.028c Protocol:IS-IS Cost:20 *NextHop:0000.0000.028b SNPA:00e0.fc3a.5ee3 Interface:Ethernet1/0/1 Pre:15 +0000.0000.280b Protocol:IS-IS Cost:10 *NextHop:0000.0000.028b SNPA:00e0.fc3a.5ee3 Interface:Ethernet1/0/1 Pre:15 +#0000.0000.028b Protocol:IS-IS Cost:10 *NextHop:0000.0000.
3Com Router 5000 Family and Router 6000 Family Command Reference display clns routing-table ● 55 Table 12 Description on the fields of the display clns routing-table command View Field Description Total Number of Routes In Level-0 Routing Table Total number of routes in the Level 0 routing table Total Number of Routes In Level-1 Routing Table Total number of routes in the Level 1 routing table Total Number of Routes In Level-2 Routing Table Total number of routes in the Level 2 routing table NSA
56 ● display clns statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display clns statistics Purpose Use the display clns statistic command to display statistics information about CLNS flow. Syntax display clns statistics Parameters None Example Display statistics information about CLNS flow.
3Com Router 5000 Family and Router 6000 Family Command Reference display clns statistics ● 57 Table 13 Description on the fields of the display clns statistics command View Field Description In discarded Number of the packets discarded upon received Fragments generated Number of the packets generated after fragmentation Format errors Number of the packets with format errors Header syntax errors Number of the packets with header syntax errors Checksum errors Number of the packets with checksum
58 ● display dlsw bridge-entry 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw bridge-entry Purpose Use the display dlsw bridge-entry command to view the bridge-set information. Syntax display dlsw bridge-entry interface-type interface-number Parameters interface-type interface-number Example Specifies an interface by its type and number. Display the bridge group information. <3Com > display dlsw bridge-entry Mac_entry Port 0000.e81c.
3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw circuits ● 59 display dlsw circuits Purpose Use the display dlsw circuits command to view the DLSw virtual circuits. Syntax display dlsw circuits [ circuit-id ] [ verbose ] Parameters circuit-id Displays the virtual circuit number of the specified DLSw. verbose Displays the detail information of the virtual circuits. Example Display the general information of the virtual circuits.
60 ● display dlsw information 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw information Purpose Use the display dlsw information command to view the DLSw exchange capability information. The output information of the command facilitates the user to understand the status of the DLSw virtual circuit and perform fault diagnosis. Syntax display dlsw information [ local ] [ ip-address ] Parameters local Displays the local exchange capability information.
3Com Router 5000 Family and Router 6000 Family Command Reference Num of TCP sessions Mac address exclusive NetBIOS Name exclusive Mac address List NetBIOS Name List Configured IP address Version string Copyright (c) 2003-2004 View display dlsw information ● 61 : 1 : no : no : none : none : 12.0.0.
62 ● display dlsw information 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw information Purpose Use the display dlsw information command to display DLSw capability exchange information. The output of this command can help you understand the status of DLSw virtual circuits. Syntax display dlsw information [ local ] [ ip-address ] Parameters local Displays the local capability exchange information.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display dlsw information ● 63
64 ● display dlsw reachable-cache 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw reachable-cache Purpose Use the display dlsw reachable-cache command to view the reachable-cache of DLSw. Syntax display dlsw reachable-cache Parameters None Example Display the reachable-cache of DLSw.
3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw reachable-cache ● 65 display dlsw reachable-cache Purpose Use the display dlsw reachable-cache command to view the reachable-cache of DLSw. Syntax display dlsw reachable-cache Parameters None Example Display the reachable-cache of DLSw.
66 ● display dlsw ethernet-backup map 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw ethernet-backup map Purpose Use the display dlsw ethernet-backup map command to display information about address translation after you configure the Ethernet switch support feature. Syntax display dlsw ethernet-backup map Parameters None Example Display information about address translation.
3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw ethernet-backup neighbour ● 67 display dlsw ethernet-backup neighbour Purpose Use the display dlsw ethernet-backup neighbour command to display all neighbors of the current router. Syntax display dlsw ethernet-backup neighbour Parameters None Example Display all neighbors of the current router. <3Com > display dlsw ethernet-backup neighbour Role Mac-Address Status LLC2-Circuit Self 00e0.fc2a.0939 Master ---Neighbor 00e0.
68 ● display dlsw remote 3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw remote Purpose Use the display dlsw remote command to view the information of the remote peers. Syntax display dlsw remote [ ip-address ] Parameters ip-address Example Display information about all remote DLSw1.0 peers. Displays the information of the remote peer with specified IP address. <3Com > display dlsw remote IP addressframe-inframe-outframe-dopstate life-time * 3.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference display dlsw remote ● 69 display dlsw remote Purpose Use the display dlsw remote command to display information about the specified or all remote peers. Syntax display dlsw remote [ ip-address ] Parameters ip-address Example Display information about all current remote peers of DLSw2.0. IP address of a remote peer. <3Com > display dlsw remote IP Address frame-in frame-out frame-drop ver type state *128.10.45.
70 ● display fr map-info 3Com Router 5000 Family and Router 6000 Family Command Reference display fr map-info Purpose Use the display fr map-info command to display frame relay (FR) address map information. Syntax display fr map-info [ interface interface-type interface-num ] Parameters interface-type interface-num Example Specifies the interface to be displayed. You can specify an interface or a sub-interface. If you do not specify an interface, information about all interfaces is displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display esis ● 71 display esis Purpose Use the display esis command to display current ES-IS protocol state, such as the configuration timer (CT) to send ISH packets, the holding time (HT) of the information ISH packets carry. Syntax display esis Parameters None Example Display current ES-IS protocol state.
72 ● display esis interface 3Com Router 5000 Family and Router 6000 Family Command Reference display esis interface Purpose Use the display esis interface command to display ES-IS related information about a specified interface. Syntax display esis interface [ interface-type interface-number ] Parameters interface-type Interface type. interface-number Interface number. Example Display ES-IS related information about an interface.
3Com Router 5000 Family and Router 6000 Family Command Reference display esis peer ● 73 display esis peer Purpose Use the display esis peer command to display information about the neighbors dynamically discovered by ES-IS protocol (including dynamic ES and IS neighbors). Syntax display esis peer Parameters None Example Display information about the neighbors dynamically discovered by ES-IS protocol. View <3Com > display esis peer 47.0000.0000.0000.
74 ● display esis statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display esis statistics Purpose Use the display esis statistic command to display statistics information about ES-IS flow. Syntax display esis statistics Parameters None Example Display statistics information about ES-IS flow.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipx interface ● 75 display ipx interface Purpose Use the display ipx interface command to view IPX interface configuration information and interface parameters in communication devices. Syntax display ipx interface [ interface-type interface-num ] Parameters interface-type Interface type. interface-num Interface number. Example Display IPX configuration and statistics of the interface Ethernet1/0/0.
76 ● display ipx interface 3Com Router 5000 Family and Router 6000 Family Command Reference Table 24 Description of display information of the display ipx interface command View Field Description SAP GNS response is ... Whether SAP GNS reply is enabled on the current interface. The related command is ipx sap gns-disable-reply. RIP packet maximum size is ... bytes Maximum size of RIP updating packet on the current interface. The related command is ipx rip mtu. SAP packet maximum size is ...
3Com Router 5000 Family and Router 6000 Family Command Reference display ipx routing-table ● 77 display ipx routing-table Purpose Use the display ipx routing-table command to view active IPX routing information. Use the display ipx routing-table verbose command to view detailed IPX routing information, including active and inactive routes. Use the display ipx routing-table network command to view active IPX routing information to specified destination network ID.
78 ● display ipx routing-table 3Com Router 5000 Family and Router 6000 Family Command Reference 0x22 Serial0/0/0 0x33 Ethernet0/0/0 0x100 Serial0/0/0 RIP 100 7 1 11.0000-0165-6401 Direct 0 1 0 0.0000-0000-0000 Static 60 6 1 0.
3Com Router 5000 Family and Router 6000 Family Command Reference View This command can be used in the following views: ■ Any view display ipx routing-table ● 79
80 ● display ipx routing-table statistics 3Com Router 5000 Family and Router 6000 Family Command Reference display ipx routing-table statistics Purpose Use the display ipx routing-table statistics command to view IPX routing statistics. Syntax display ipx routing-table statistics Parameters None Example Display IPX routing statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference display ipx service-table ● 81 display ipx service-table Purpose Use the display ipx service-table command to view contents of IPX service information table. The output information of the command helps users with IPX SAP troubleshooting.
82 ● display ipx service-table 3Com Router 5000 Family and Router 6000 Family Command Reference Prn1 Eth1/0/0 Prn2 Eth1/0/0 Prn3 Eth1/0/0 Prn4 Eth1/0/0 View 0005 000d 000a-000a-000a 0452 500 02 0005 0008 000a-000a-000a 0452 500 03 0005 000d 0005-0005-0005 0452 500 06 0005 000d 0006-006-0006 This command can be used in the following views: ■ Any view 0452 500 06
3Com Router 5000 Family and Router 6000 Family Command Reference display ipx statistics ● 83 display ipx statistics Purpose Use the display ipx statistics command to view statistics and type of IPX packet transmitted and received. Syntax display ipx statistics Parameters None Example Display IPX statistics.
84 ● display ipx statistics 3Com Router 5000 Family and Router 6000 Family Command Reference Table 27 Description on the fields of the display ixp statistics command View Field Description 0 no route Number of messages which do not find routes 0 discarded Number of messages discarded during sending RIP: Statistics for RIP messages 0 sent Number of RIP messages sent by router 0 received Number of RIP messages received 0 responses sent Number of RIP response messages sent by router 0 respons
3Com Router 5000 Family and Router 6000 Family Command Reference display isis routing clns ● 85 display isis routing clns Purpose Use the display isis routing clns command to display CLNS routing information generated by IS-IS protocol. Syntax display isis routing clns Parameters None Example Display CLNS routing information generated by IS-IS protocol. <3Com > display isis routing clns ISIS clns Level - 1 Routing Table : System Id Nexthop 1111.1111.1111 0000.0000.0001 2222.2222.2222 0000.0000.
86 ● display llc2 3Com Router 5000 Family and Router 6000 Family Command Reference display llc2 Purpose Use the display llc2 command to view statistical information of LLC2. Syntax display llc2 [ circuit correlator ] Parameters correlator Example Display the statistical information of LLC2 ID used to distinguish different circuits.\ <3Com > display llc2 circuit 46465025 llc2 circuit index 46465025 Local MAC 0.20.35.7b.e0.65 Remote MAC 0. 0.84.25.1e.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 map ● 87 display x25 map Purpose Use the display x25 map command to display X.25 address map information. Syntax display x25 map Parameters None Example Display X.25 address map information. [3Com ] display x25 map Interface:Serial3/0/0(protocol status is up): ip address:202.38.162.2 X.121 address: 22 map-type: SVC_MAP VC-number: 0 Facility: ACCEPT_REVERSE; BROADCAST; PACKET_SIZE: I 512 O 512 ; Interface:Serial1/0/0.
88 ● display x25 vc 3Com Router 5000 Family and Router 6000 Family Command Reference display x25 vc Purpose Use the display x25 vc command to display information about X.25 virtual circuits. Syntax display x25 vc [ lci ] Parameters lci Example Display X.25 virtual circuits. Logical channel identifier. Valid values are 1 to 4095. If you do not provide this argument, all X.25 virtual circuits are displayed.
3Com Router 5000 Family and Router 6000 Family Command Reference display x25 vc ● 89 PVC 1 State: D3 PVC <--> XOT Serial2/0/0-1.1.1.
90 ● display x25 vc Description 3Com Router 5000 Family and Router 6000 Family Command Reference Switched virtual circuits (SVC) are established on demand by X.25 network signaling. Whereas permanent virtual circuits (PVC) are established by manually configuring and remain regardless of data transmission. When operating in X.25 switching mode, a router can also establish virtual circuits as needed to switch data. You can use this command to check virtual circuits of all these types.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw bridge-set ● 91 dlsw bridge-set Purpose Use the dlsw bridge-set command to configure the bridge group to connect DLSw. Use the undo dlsw bridge-set command to delete the bridge. Syntax dlsw bridge-set bridge-set-number undo dlsw bridge-set bridge-set-number Parameters bridge-set-number Example Configure the bridge group connected with DLSw, with the ID of the bridge group being 20.
92 ● dlsw enable 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw enable Purpose Use the dlsw enable command to enable DLSw performance. Use the undo dlsw enable command to suspend DLSw performance. Syntax dlsw enable undo dlsw enable Parameters None Default By default,DLSw performance is enabled. Example Suspend DLSw performance. [3Com ] undo dlsw enable Enable DLSw performance.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw ethernet-backup enable ● 93 dlsw ethernet-backup enable Purpose Use the dlsw ethernet-backup enable command to enable DLSw Ethernet redundancy. Use the undo dlsw ethernet-backup enable command to disable DLSw Ethernet redundancy.
94 ● dlsw ethernet-backup map 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw ethernet-backup map Purpose Use the dlsw ethernet-backup map command to enable the Ethernet switch support feature for DLSw Ethernet redundancy, that is, to map the MAC address of a remote SNA device to a local virtual MAC address. Use the undo dlsw ethernet-backup map command to remove the map entries between the MAC address of the specified remote SNA device and the local virtual MAC address.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw ethernet-backup map ● 95 for backup. In case the DLSw router fails, the neighbor takes over the address translation responsibility by using the backup map. DLSw Ethernet redundancy supports up to 200 map entries.
96 ● dlsw ethernet-backup timer 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw ethernet-backup timer Purpose Use the dlsw ethernet-backup timer command to configure the time for which the master DLSw router waits before sending a positive or negative response to the slave DLSw router upon receipt of a circuit establishing request. Use the undo dlsw ethernet-backup timer command to restore the default wait time.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw filter acl ● 97 dlsw filter acl Purpose Use the dlsw filter acl command to specify to filter packets from any peer. Use the undo dlsw filter acl command to disable filtering of packets from peers. Syntax dlsw filter acl acl-number undo dlsw filter acl acl-number Parameters acl acl-num Example Specify to use ACL 4000 to filter packets from all peers, including those learned dynamically.
98 ● dlsw local 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw local Purpose Use the dlsw local command to create the DLSw local peer. Use the undo dlsw local command to delete the local peer or restore the default.
3Com Router 5000 Family and Router 6000 Family Command Reference Description dlsw local ● 99 Creating a TCP tunnel is the first step for establishing the DLSw connection. In order to create the TCP tunnel, the DLSw local peer is to be first configured to specify the local IP address that creates the TCP connection before receiving the TCP connection request initiated by the remote router. A router can only have one local peer.
100 ● dlsw max-transmission 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw max-transmission Purpose Use the dlsw max-transmission command to set the maximum number of the attempts to send an explorer frame. Use the undo dlsw max-transmission command to restore the default. You can use this command only after enabling DLSw2.0.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw multicast ● 101 dlsw multicast Purpose Use the dlsw multicast command to enable the multicast function of DLSw2.0. Use the undo dlsw multicast command to disable the multicast function of DLSw2.0. Syntax dlsw multicast [ multicast-IP-address ] undo dlsw multicast Parameters multicast-IP-address Default By default, the multicast function of DLSw2.0 is disabled. Example Add multicast IP address 224.0.10.10 for DLSw2.0.
102 ● dlsw remote 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw remote Purpose Use the dlsw remote command to create a remote DLSw peer and specifies its version and filtering rule. Use the undo dlsw remote command to remove a remote DLSw peer. Syntax dlsw remote ip-address [ version version-number | acl acl-num ] * undo dlsw remote ip-address Parameters Example ip-address Specifies the IP address of a remote peer.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw reachable ● 103 dlsw reachable Purpose Use the dlsw reachable command to configure locally reachable MAC and SAP addresses. Use the undo dlsw enable command to cancel the configuration.
104 ● dlsw reachable-cache 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw reachable-cache Purpose Use the dlsw reachable-cache command to add the reachability information of the specified SNA device to the reachable-cache. You can specify this SNA device by specifying its MAC address and IP address of the router to which it is connected. Use the undo dlsw reachable-cache command to remove the configured reachability information.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw remote ● 105 dlsw remote Purpose Use the dlsw remote command to create the DLSw remote peer. Use the undo dlsw remote command to delete the remote peer.
106 ● dlsw remote Description 3Com Router 5000 Family and Router 6000 Family Command Reference After the local peer is configured, the remote peer needs to be configured to create the TCP tunnel. The router will keep attempting to create the TCP connection with the remote router. A router can be configured with several remote peers so as to create the TCP tunnel with several remote routers. When creating a remote backup peer, note the following: 1.
3Com Router 5000 Family and Router 6000 Family Command Reference dlsw reverse ● 107 dlsw reverse Purpose Use the dlsw reverse command to convert a MAC address from Ethernet order to token ring order or vice versa. Syntax dlsw reverse mac-address Parameters mac-address Example Translate MAC address 0012-3578-4521 into an address in the other format. MAC address to be translated.
108 ● dlsw timer 3Com Router 5000 Family and Router 6000 Family Command Reference dlsw timer Purpose Use the dlsw timer command to configure the DLSw timer parameters. Use the undo dlsw timer command to restore the default value of the DLSw timer parameters.
3Com Router 5000 Family and Router 6000 Family Command Reference Description dlsw timer ● 109 By configuring the DLSw timer, the various kinds of timers used for the DLSw to create the virtual circuit can be revised. But the user is suggested not to revise the DLSw timer parameters randomly.
110 ● esis 3Com Router 5000 Family and Router 6000 Family Command Reference esis Purpose Use the esis command to employ ES-IS protocol globally and enter ES-IS view. Use the undo esis command to disable ES-IS protocol. Syntax esis undo esis Parameters None Default ES-IS protocol is not employed by default. Example Employ ES-IS protocol globally. <3Com > system-view System View: return to User View with Ctrl+Z.
3Com Router 5000 Family and Router 6000 Family Command Reference esis enable ● 111 esis enable Purpose Use the esis enable command to employ ES-IS protocol on the interface. Use the undo esis enable command to disable ES-IS protocol on the interface. Syntax esis enable undo esis enable Parameters None Default ES-IS protocol is not employed on an interface by default. Example Employ ES-IS protocol on Ethernet0/0/0 interface. <3Com > system-view System View: return to User View with Ctrl+Z.
112 ● fr map clns 3Com Router 5000 Family and Router 6000 Family Command Reference fr map clns Purpose Use the fr map clns command to add an FR mapping for OSI packets. Use the undo fr map clns command to remove an FR mapping established for OSI packets. Syntax fr map clns dlci [ nonstandard | ietf ] [ compression frf9 ] undo fr map clns dlci Parameters dlci Local virtual circuit number. Valid values are 16 to 1007. nonstandard Specifies to encapsulate the mapping in a non-standard format.
3Com Router 5000 Family and Router 6000 Family Command Reference idle-mark ● 113 idle-mark Purpose Use the idle-mark command to configure the idle coding scheme of the synchronous serial port. Use the undo idle-mark command to restore the default idle coding scheme of the synchronous serial port. Syntax idle-mark undo idle-mark Parameters None Default By default, the synchronous serial port adopts the “7E” coding scheme.
114 ● ipx enable 3Com Router 5000 Family and Router 6000 Family Command Reference ipx enable Purpose Use the ipx enable command to activate IPX. Use the undo ipx enable command to deactivate IPX and remove all IPX configurations simultaneously. Syntax ipx enable [ node node ] undo ipx enable Parameters node Node value of the router. It is a 48-bit value represented by a triplet of four-digit hexadecimal numbers separated by “-“. It is neither a broadcasting address nor a multicast address.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx encapsulation ● 115 ipx encapsulation Purpose Use the ipx encapsulation command to set IPX frame encapsulation format on Ethernet interface. Use the undo ipx encapsulation command to restore the default IPX frame encapsulation format. Syntax ipx encapsulation [ dot2 | dot3 | ethernet-2 | snap ] undo ipx encapsulation Parameters dot2 Encapsulation format is Ethernet_802.2. dot3 Encapsulation format is Ethernet_802.3.
116 ● ipx netbios-propagation 3Com Router 5000 Family and Router 6000 Family Command Reference ipx netbios-propagation Purpose Use the ipx netbios-propagation command to configure the router to forward type 20 broadcast packets on the current interface. Use the undo ipx netbios-propagation command to disable the forwarding of type 20 packets.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx network ● 117 ipx network Purpose Use the ipx network command to configure a network ID for an interface. Use the undo ipx network command to delete IPX network ID of an interface. Syntax ipx network network undo ipx network Parameters network Default By default, IPX is disabled on all interfaces after it is activated. There is no IPX network ID on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx rip mtu ● 119 ipx rip mtu Purpose Use the ipx rip mtu command to configure RIP updating packet size. Use the undo ipx rip mtu command to restore the default configuration. Syntax ipx rip mtu bytes undo ipx rip mtu Parameters bytes Default By default, the maximum size of RIP updating packets is 432 bytes.
120 ● ipx rip multiplier 3Com Router 5000 Family and Router 6000 Family Command Reference ipx rip multiplier Purpose Use the ipx rip multiplier command to configure the aging period of RIP routing information table items. Use the undo ipx rip multiplier command to restore the default configuration. Syntax ipx rip multiplier multiplier undo ipx rip multiplier Parameters multiplier Default By default, RIP aging period is 3 times of updating interval.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx rip timer update ● 121 ipx rip timer update Purpose Use the ipx rip timer update command to configure RIP updating interval. Use the undo ipx rip timer update command to restore the default value of RIP updating interval. Syntax ipx rip timer update seconds undo ipx rip timer update Parameters seconds Default By default, the RIP updating interval is 60 seconds. Example Configure RIP updating interval to 30 seconds.
122 ● ipx route load-balance-path 3Com Router 5000 Family and Router 6000 Family Command Reference ipx route load-balance-path Purpose Use the ipx route load-balance-path command to configure the equivalent route number to the same destination address. Use the undo ipx route load-balance-path command to restore the default configuration.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx route max-reserve-path ● 123 ipx route max-reserve-path Purpose Use the ipx route max-reserve-path command to configure the maximum dynamic route number to the same destination address. Use the undo ipx route max-reserve-path command to restore the default configuration.
124 ● ipx route-static 3Com Router 5000 Family and Router 6000 Family Command Reference ipx route-static Purpose Use the ipx route-static command to configure IPX static route. Use the undo ipx route-static command to delete static route. Syntax ipx route-static network { network.node | interface-type interface-num } [ preference value ] [ tick ticks hop hops ] undo ipx route-static { network [ network.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx route-static ● 125 Configure the default IPX route with the next hop being 3.4a-60-7, ticks 10, hops 2 and preference 20. [3Com ] ipx enable [3Com ] ipx route-static FFFFFFFE 3.4a-60-7 preference 20 tick 10 hop 2 Configure an IPX static route with destination network ID being 3a, outgoing interface being Serial1/0/0, ticks 10, hops 2 and preference 30.
126 ● ipx sap disable 3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap disable Purpose Use the ipx sap disable command to disable SAP on the current interface. Use the undo ipx sap disable command to enable SAP on the current interface. Syntax ipx sap disable undo ipx sap disable Parameters None Default By default, the interface SAP is enabled as soon as IPX is enabled. Example Disable SAP on the interface Ethernet0/0/0.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap gns-disable-reply ● 127 ipx sap gns-disable-reply Purpose Use the ipx sap gns-disable-reply command to disable IPX GNS reply on the current interface. Use the undo ipx sap gns-disable-reply command to enable IPX GNS reply on the current interface. Syntax ipx sap gns-disable-reply undo ipx sap gns-disable-reply Parameters None Default By default, GNS reply is enabled on an interface.
128 ● ipx sap gns-load-balance 3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap gns-load-balance Purpose Use the ipx sap gns-load-balance command to configure the router to respond GNS request in Round-robin method, that is, all servers respond GNS request in turn. Use the undo ipx sap gns-load-balance command to configure the nearest server to respond GNS request.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap max-reserve-servers ● 129 ipx sap max-reserve-servers Purpose Use the ipx sap max-reserve-servers command to configure the length of the service information reserve queue. Use the undo ipx sap max-reserve-servers command to restore the default configuration. Syntax ipx sap max-reserve-servers length undo ipx sap max-reserve-servers Parameters length Example Set the maximum length of service information reserve queue to 1024.
130 ● ipx sap mtu 3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap mtu Purpose Use the ipx sap mtu command to configure the maximum size of SAP updating packet. Use the undo ipx sap mtu command to restore the default configuration. Syntax ipx sap mtu bytes undo ipx sap mtu Parameters bytes Default By default, the maximum size of SAP updating packet is 480 bytes.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap multiplier ● 131 ipx sap multiplier Purpose Use the ipx sap multiplier command to configure the aging period of SAP service information table items. Use the undo ipx sap multiplier command to restore the default value of SAP aging period.
132 ● ipx sap timer update 3Com Router 5000 Family and Router 6000 Family Command Reference ipx sap timer update Purpose Use the ipx sap timer update command to configure SAP updating interval. Use the undo ipx sap timer update command to restore the default value of SAP updating interval. Syntax ipx sap timer update seconds undo ipx sap timer update Parameters seconds Example Configure SAP updating interval to 300 seconds. SAP updating interval (in seconds). Valid values are 10 to 60000 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx service ● 133 ipx service Purpose Use the ipx service command to add a static service information item to SIT. Use the undo ipx service command to delete a static service information item from SIT. Syntax ipx service service-type name network.node socket hop hopcount preference preference undo ipx service { { service-type [ name [ network.
134 ● ipx service View 3Com Router 5000 Family and Router 6000 Family Command Reference This command can be used in the following views: ■ Description System view The NetWare server uses SAP to advertise service information and stores the service information to SIT which is dynamically updated by SAP. Adding a service information item to SIT, users can access the service.
3Com Router 5000 Family and Router 6000 Family Command Reference ipx split-horizon ● 135 ipx split-horizon Purpose Use the ipx split-horizon command to enable split horizon on the current interface. Use the undo ipx split-horizon command to disable split horizon on the current interface. Syntax ipx split-horizon undo ipx split-horizon Parameters None Default By default, split horizon is enabled on the interface. Example Enable split horizon on the interface Ethernet1/1/0.
136 ● ipx tick 3Com Router 5000 Family and Router 6000 Family Command Reference ipx tick Purpose Use the ipx tick command to configure the delay of interface sending IPX packets. Use the undo ipx tick command to restore the default value of interface delay. Syntax ipx tick ticks undo ipx tick Parameters ticks Example Configure the delay is 5 ticks on the interface Ethernet1/0/0. Delay time (in ticks) Valid values are 0 to 30000. One tick is 1/18 second (approximately 55 ms).
3Com Router 5000 Family and Router 6000 Family Command Reference ipx update-change-only ● 137 ipx update-change-only Purpose Use the ipx update-change-only command to enable trigger update on the current interface. Use the undo ipx update-change-only command to disable trigger update on the current interface. Syntax ipx update-change-only undo ipx update-change-only Parameters None Default By default, trigger update is disabled on the interface.
138 ● isis enable clns 3Com Router 5000 Family and Router 6000 Family Command Reference isis enable clns Purpose Use the isis enable clns command to enable CLNS-based IS-IS routing process for a specified interface. Use the undo isis enable clns command to delete the enabled IS-IS process on a specified interface. Syntax isis enable clns [ tag ] undo isis enable clns [ tag ] Parameters tag Default By default, IS-IS process is not enabled on the interface.
3Com Router 5000 Family and Router 6000 Family Command Reference link-protocol sdlc ● 139 link-protocol sdlc Purpose Use the link-protocol sdlc command to change the link layer encapsulation protocol of the synchronous serial interface into SDLC. Syntax link-protocol sdlc Parameters None Default By default, the encapsulated link layer protocol of the synchronous serial interface is PPP. Example Configure the encapsulation protocol on the Serial1/0/0 as SDLC.
140 ● llc2 max-ack 3Com Router 5000 Family and Router 6000 Family Command Reference llc2 max-ack Purpose Use the llc2 max-ack command to configure the length of the advance response window before the LLC2 sending the acknowledgement frame. Use the undo llc2 max-ack command to restore the default length of the advance response window before the LLC2 sending the acknowledgement frame.
3Com Router 5000 Family and Router 6000 Family Command Reference llc2 max-send-queue ● 141 llc2 max-send-queue Purpose Use the llc2 max-send-queue command to configure the queue length sending the LLC2 packet. Use the undo llc2 max-send-queue command to restore the default queue length sending the LLC2 packet. Syntax llc2 max-send-queue length undo llc2 max-send-queue Parameters length Example Configure the queue length sending the LLC2 packet as 30. The queue length sending the LLC2 packet.
142 ● llc2 max-transmission 3Com Router 5000 Family and Router 6000 Family Command Reference llc2 max-transmission Purpose Use the llc2 max-transmission command to configure the retransmission times of the LLC2. Use the undo llc2 max-transmission command to restore the default retransmission times of the LLC2. Syntax llc2 max-transmission retries undo llc2 max-transmission Parameters retries Example Set the number of transmission retries of the LLC2 to 10. LLC2 retransmission times.
3Com Router 5000 Family and Router 6000 Family Command Reference llc2 modulo ● 143 llc2 modulo Purpose Use the llc2 modulo command to configure the modulus of the LLC2. Use the undo llc2 modulo command to restore the default modulus of the LLC2. Syntax llc2 modulo n undo llc2 modulo Parameters n Example Restore the default modulus of the LLC2. The modulus of the LLC2, with the available values of 8 or 128. If no value is specified, the default modulus of the LLC2 is 128.
144 ● llc2 receive-window 3Com Router 5000 Family and Router 6000 Family Command Reference llc2 receive-window Purpose Use the llc2 receive-window command to configure the maximum packets that can be sent before the LLC2 receives the acknowledgement frame. Use the undo llc2 receive-window command to restore the default value of the maximum packets that can be sent before the acknowledgement frame is received.
3Com Router 5000 Family and Router 6000 Family Command Reference llc2 timer ack ● 145 llc2 timer ack Purpose Use the llc2 timer ack command to configure the LLC2 local response time. Use the undo llc2 timer ack command to restore the default value of the LLC2 local response time. Syntax llc2 timer ack mseconds undo llc2 timer ack Parameters mseconds Example Configure the LLC2 local response time as 10ms. LLC2 local response time. Valid values are 1 to 60000ms.
146 ● llc2 timer ack-delay 3Com Router 5000 Family and Router 6000 Family Command Reference llc2 timer ack-delay Purpose Use the llc2 timer ack-delay command to configure the local acknowledgement delay time when the LLC2 receives information frames. Use the undo llc2 timer ack-delay command to restore the default value of the local acknowledgement delay time when the LLC2 receives information frame.
3Com Router 5000 Family and Router 6000 Family Command Reference llc2 timer busy ● 147 llc2 timer busy Purpose Use the llc2 timer busy command to configure the LLC2 BUSY time. Use the undo llc2 timer busy command to restore the default value of the LLC2 BUSY time. Syntax llc2 timer busy mseconds undo llc2 timer busy Parameters mseconds Example Configure the LLC2 BUSY time as 200ms. The LLC2 BUSY time. Valid values are 1 to 60000ms. If not specified, the default LLC2 BUSY time is 300ms.
148 ● llc2 timer poll 3Com Router 5000 Family and Router 6000 Family Command Reference llc2 timer poll Purpose Use the llc2 timer poll command to configure the P/F waiting time of the LLC2. Use the undo llc2 timer poll command to restore the default value of the LLC2 P/F waiting time. Syntax llc2 timer poll mseconds undo llc2 timer poll Parameters mseconds Example Configure the LLC2 P/F waiting time as 2000ms. LLC2 P/F waiting time. Valid values are 1 to 60000ms.
3Com Router 5000 Family and Router 6000 Family Command Reference llc2 timer reject ● 149 llc2 timer reject Purpose Use the llc2 timer reject command to configure the REJ time of the LLC2. Use the undo llc2 timer reject command to restore the default value of the LLC2 REJ time. Syntax llc2 timer reject mseconds undo llc2 timer reject Parameters mseconds Default By default, the LLC2 REJ time is 500ms. Example Configure the LLC2 REJ time as 2000ms. The LLC2 REJ time. Valid values are 1 to 60000ms.
150 ● map clns 3Com Router 5000 Family and Router 6000 Family Command Reference map clns Purpose Use the map clns command to create a CLNSOA mapping for a PVC. Use the undo map clns command to remove existing CLNSOA mapping. Syntax map clns undo map clns Parameters None Default No CLNSOA mapping is established by default. Example Create a static mapping on PVC 1/32.
3Com Router 5000 Family and Router 6000 Family Command Reference ping clns ● 151 ping clns Purpose Use the ping clns command to test the reachability to a specified destination. Syntax ping clns NSAP Parameters NSAP Example A successful ping operation. Layer 3 address of the destination in the format of ##.####. ... .##. <3Com > ping clns 49.0001.0000.0000.026a.00 The system is alive. An unsuccessful ping operation. <3Com > ping clns 47.0001.0001.0001.000a.0025.11 Can not reach the system.
152 ● ping ipx 3Com Router 5000 Family and Router 6000 Family Command Reference ping ipx Purpose Use the ping ipx command to check host reachability and network connectivity in IPX network. Syntax ping ipx network.node [ -c count ] [ -t timeout ] [ -s size ] Parameters network.node Ping destination address. The parameter network can be an eight-bit hexadecimal number ranging from 0x1 to 0xFFFFFFFD. The 0s in front can be omitted when inputting.
3Com Router 5000 Family and Router 6000 Family Command Reference preference clns ● 153 preference clns Purpose Use the preference clns command to set the preference of the CLNS routes discovered by IS-IS protocol. Use the undo preference clns command to revert the preference of the CLNS routes discovered by IS-IS protocol to the default. Syntax preference clns value undo preference clns Parameters value Default The default preference value of CLNS routes discovered by IS-IS protocol is 15.
154 ● reset clns statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset clns statistics Purpose Use the reset clns statistics command to reset statistics information about CLNS flow. Syntax reset clns statistics Parameters None Example Reset statistics information about CLNS flow. <3Com > reset clns statistics View This command can be used in the following views: ■ Description User view This command clears interface statistics and global statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw bridge-entry ● 155 reset dlsw bridge-entry Purpose Use the reset dlsw bridge-entry command to clear the entry cache information in the DLSw bridge group. Syntax reset dlsw bridge-entry Parameters None Example Clear the entry cache information in the DLSw bridge group.
156 ● reset dlsw circuits 3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw circuits Purpose Use the reset dlsw circuits command to clear the DLSw virtual circuit information. Syntax reset dlsw circuits [ circuit-id ] Parameters circuit-id Example Clear the virtual circuit information with the virtual circuit number of 100. The virtual circuit ID of DLSw. Valid values are 0 to FFFFFFFF.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw ethernet-backup circuit ● 157 reset dlsw ethernet-backup circuit Purpose Use the reset dlsw ethernet-backup circuit command to clear information about all circuits that the router and its neighbors have established with the remote peers since DLSw Ethernet redundancy is enabled.
158 ● reset dlsw ethernet-backup map 3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw ethernet-backup map Purpose Use the reset dlsw ethernet-backup map command to clear the MAC address map of the Ethernet switch support feature. Syntax reset dlsw ethernet-backup map Parameters None Example Clear the MAC address map of the Ethernet switch support feature.
3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw reachable-cache ● 159 reset dlsw reachable-cache Purpose Use the reset dlsw reachable-cache command to clear information from the reachable-cache of the DLSw. Syntax reset dlsw reachable-cache Parameters None Example Clear information from the reachable-cache of the DLSw.
160 ● reset dlsw tcp 3Com Router 5000 Family and Router 6000 Family Command Reference reset dlsw tcp Purpose Use the reset dlsw tcp command to reestablish or delete all connection to all the remote peers. Use the reset dlsw tcp ip-address command to reestablish a TCP connection or delete the connection to the specified remote peer. Syntax reset dlsw tcp [ ip-address ] Parameters ip-address Example Specify to reestablish the TCP connections to the remote peers. IP address of the remote peer.
3Com Router 5000 Family and Router 6000 Family Command Reference reset esis statistics ● 161 reset esis statistics Purpose Use the reset esis statistics command to reset statistics information about ES-IS flow. Syntax reset esis statistics Parameters None Example Reset statistics information about ES-IS flow. <3Com > reset esis statistics View This command can be used in the following views: ■ Description User view This command clears interface statistics and global statistics.
162 ● reset ipx routing-table statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset ipx routing-table statistics Purpose The reset ipx routing-table statistics command is used to clear the statistical information of a specified type of IPX route. Syntax reset ipx routing-table statistics protocol [ all | default | direct | rip | static ] Parameters all Clears statistical information of all types IPX route.
3Com Router 5000 Family and Router 6000 Family Command Reference Static 0 RIP 0 Default 0 Total 0 <3Com > View 9 9 0 0 0 0 0 0 0 0 0 0 1 0 10 10 This command can be used in the following views: ■ Description reset ipx routing-table statistics ● 163 User view The reset ipx routing-table statistics command is used to clear the statistical information of a specified type of IPX route. Such information can be shown upon the terminal using the display ipx routing-table statistics command.
164 ● reset ipx statistics 3Com Router 5000 Family and Router 6000 Family Command Reference reset ipx statistics Purpose Use the reset ipx statistics command to clear IPX statistics by the system. Syntax reset ipx statistics Parameters None Example Clear IPX statistics.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc controller ● 165 sdlc controller Purpose Use the sdlc controller command to configure the secondary station address of the SDLC. Use the undo sdlc controller command to delete the secondary station address of the SDLC. Syntax sdlc controller sdlc-address undo sdlc controller sdlc-address Parameters sdlc-address Default By default, the secondary station address of the SDLC is not configured.
166 ● sdlc mac-map local 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc mac-map local Purpose Use the sdlc mac-map local command to configure the virtual MAC address of the SDLC. Use the undo sdlc mac-map local command to delete the virtual MAC address of the SDLC. Syntax sdlc mac-map local mac-address undo sdlc mac-map local Parameters mac-address Default By default, the SDLC has no virtual MAC address. Example Configure the virtual MAC address of the SDLC.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc mac-map remote ● 167 sdlc mac-map remote Purpose Use the sdlc mac-map remote command to configure the SDLC peer. Use the undo sdlc mac-map remote command to delete the SDLC peer. Syntax sdlc mac-map remote mac-addr sdlc-addr undo sdlc mac-map remote mac-addr sdlc-addr Parameters mac-addr The MAC address of the SDLC peer. sdlc-addr The SDLC address of the SDLC peer.
168 ● sdlc max-pdu 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc max-pdu Purpose Use the sdlc max-pdu command to configure the maximum receivable frame length of the SDLC. Use the undo sdlc max-pdu command to restore the default value of the SDLC maximum receivable frame length. Syntax sdlc max-pdu n undo sdlc max-pdu Parameters n Default By default, the maximum receivable frame length of the SDLC is of 265 bytes.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc max-send-queue ● 169 sdlc max-send-queue Purpose Use the sdlc max-send-queue command to configure the queue length sending the SDLC packet. Use the undo sdlc max-send-queue command to restore the default value of the queue length sending the SDLC packet. Syntax sdlc max-send-queue length undo sdlc max-send-queue Parameters length Example Configure the queue length sending the SDLC packet on the Serial1/0/0 as 30.
170 ● sdlc max-transmission 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc max-transmission Purpose Use the sdlc max-transmission command to configure the SDLC timeout retransmission times. Use the undo sdlc max-transmission command to restore the default value of the SDLC timeout retransmission times. Syntax sdlc max-transmission retries undo sdlc max-transmission Parameters retries Example Configure the SDLC timeout retransmission times as 30.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc modulo ● 171 sdlc modulo Purpose Use the sdlc modulo command to configure the modulus of the SDLC. Use the undo sdlc modulo command to restore the default modulus of the SDLC. Syntax sdlc modulo n undo sdlc modulo Parameters n Default By default, the SDLC modulus is 8. Example Restore the default modulus of the SDLC. SDLC modulus, with available value of 8 or 128.
172 ● sdlc sap-map local 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc sap-map local Purpose Use the sdlc sap-map local command to configure the SAP address on transforming the SDLC into the LLC2. Use the undo sdlc sap-map local command to restore the default value of the LLC2 SAP address. Syntax sdlc sap-map local lsap sdlc-addr undo sdlc sap-map local lsap sdlc-addr Parameters lsap The virtual SAP address set by the device connected with the local interface.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc sap-map remote ● 173 sdlc sap-map remote Purpose Use the sdlc sap-map remote command to configure the remote DLSw device SAP address when SDLC is translated into LLC2. Use the undo sdlc sap-map remote command to restore the default value. Syntax sdlc sap-map remote dsap sdlc-addr undo sdlc sap-map remote dsap sdlc-addr Parameters Example dsap The SAP address of the DLSw peer device. By default, dsap is 04.
174 ● sdlc simultaneous 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc simultaneous Purpose Use the sdlc simultaneous command to configure the SDLC data to use the bidirectional transmission mode. Use the undo sdlc simultaneous command to stop the SDLC data to use the bidirectional transmission mode. Syntax sdlc simultaneous undo sdlc simultaneous Parameters None Default By default, the SDLC data are transmitted in bidirectional mode.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc status ● 175 sdlc status Purpose Use the sdlc role command to configure the SDLC role the device acts. Use the undo sdlc role command to restore the default SDLC role. Syntax sdlc status { primary | secondary } undo sdlc status Parameters primary The primary station of the end, controlling the whole connection process. secondary The secondary station of the end, controlled by the primary station.
176 ● sdlc timer lifetime 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc timer lifetime Purpose Use the sdlc timer lifetime command to configure the SDLC secondary station response waiting time (mseconds). Use the undo sdlc timer lifetime command to restore the default value of the SDLC secondary station response waiting time.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc timer poll ● 177 sdlc timer poll Purpose Use the sdlc timer poll command to configure the SDLC poll pause timer. Use the undo sdlc timer poll command to restore the default value of the SDLC poll pause timer. Syntax sdlc timer poll mseconds undo sdlc timer poll Parameters mseconds Default By default, the SDLC poll pause timer is 1000ms. Example Configure the SDLC poll pause timer as 200ms. SDLC poll pause timer.
178 ● sdlc timer ack 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc timer ack Purpose Use the sdlc timer ack command to configure the SDLC primary station response waiting time (mseconds). Use the undo sdlc timer ack command to restore the default value of the SDLC primary station response waiting time. Syntax sdlc timer ack mseconds undo sdlc timer ack Parameters mseconds Default By default, the configured SDLC primary station response waiting time is 3000ms.
3Com Router 5000 Family and Router 6000 Family Command Reference sdlc window ● 179 sdlc window Purpose Use the sdlc window command to configure the length of the SDLC local response window. Use the undo sdlc window command to restore the default length of the SDLC local response window. Syntax sdlc window length undo sdlc window Parameters length Default By default, the default length of the SDLC local response window is 7.
180 ● sdlc xid 3Com Router 5000 Family and Router 6000 Family Command Reference sdlc xid Purpose Use the sdlc xid command to configure the XID of the SDLC. Use the undo sdlc xid command to delete the XID of the SDLC. Syntax sdlc xid sdlc-address xid-number undo sdlc xid sdlc-address Parameters sdlc-address The SDLC address of the XID, which should be configured beforehand. xid-number An integer with a length of 4 bytes, ranging from 1 to 0xFFFFFFFF.
3Com Router 5000 Family and Router 6000 Family Command Reference timer configuration ● 181 timer configuration Purpose Use the timer configuration command to set the interval to send ISH packets. Use the undo timer configuration command to revert to the default interval to send ISH packets. Syntax timer configuration [ seconds ] undo timer configuration Parameters seconds Example Set the interval to send ISH packets to 20 seconds. Interval in seconds to send ISH packets.
182 ● timer holding 3Com Router 5000 Family and Router 6000 Family Command Reference timer holding Purpose Use the timer holding command to set the holding time of the information ISH packets sent carry. Use the undo timer holding command to revert to the default holding time. Syntax timer holding [ seconds ] undo timer holding Parameters seconds Example Set the interval to send ISH packets to 20 seconds, and the holding time of the information ISH packets sent carry to 60 seconds.
3Com Router 5000 Family and Router 6000 Family Command Reference tracert clns ● 183 tracert clns Purpose Use the tracert clns command to track the nodes along the route that leads to a specified destination. Syntax tracert clns [ -m max-TTL | -n n-request | -t timeout | -v ] * NSAP Parameters -m max-TTL Sets the maximum time to live (TTL) value available for echo request (ERQ) packets. Valid values for the max-TTL argument range from 1 to 255. If not specified, the default is 30.
184 ● tracert clns 3Com Router 5000 Family and Router 6000 Family Command Reference 3 47.0001.0002.0001.000c.0035.00 20ms !A Destination address unreachable 47.0001.0002.0001.000c.0036.00 10ms 47.0001.0002.0001.000c.0035.00 10ms !A Destination address unreachable 4 View This command can be used in the following views: ■ Description 47.0001.0001.0001.000a.0025.11 39ms 47.0001.0001.0001.000a.0025.11 39ms 47.0001.0001.0001.000a.0025.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 map clns ● 185 x25 map clns Purpose Use the x25 map clns command to configure a CLNS address mapping for an X.121 address. Use the undo x25 map command to remove an existing mapping. Syntax x25 map clns x121-address x.121-address [ option ] undo x25 map clns Parameters clns Specifies to use CLNS protocol. protocol-address Protocol address of the peer ES. x.121-address X.121 address of the peer ES.
186 ● x25 map clns Example 3Com Router 5000 Family and Router 6000 Family Command Reference ■ roa-list name: Specifies an ROA list name configured using the x25 roa command in system view for the X.25 interface. ■ send-delay milliseconds: Specifies to carry maximum transmission delay requests when launching calls using this address mapping. ■ threshold in out: Specifies the acceptable throughput. The value of in/out can be 75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, and 48000.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 default-protocol ● 187 x25 default-protocol Purpose Use the x25 default-protocol command to set the upper layer protocol for an X.25 interface that X.25 protocol carries by default. Use the undo x25 default-protocol command to revert to the default upper layer protocol. Syntax x25 default-protocol [ protocol-type ] undo x25 default-protocol Parameters protocol-type Default The default upper layer protocol carried by X.
188 ● x25 pvc 3Com Router 5000 Family and Router 6000 Family Command Reference x25 pvc Purpose Use the x25 pvc command to configure an X.25 PVC route. Use the undo x25 pvc command to remove an X.25 PVC route. Syntax x25 pvc pvc-number { ip protocol-address [ compressedtcp ] | clns }*x121-address x.121-address [ option ] undo x25 pvc pvc-number Parameters Example pvc-number PVC number ranging from 1 to 4094 (include). This argument must be within PVC channel range.
3Com Router 5000 Family and Router 6000 Family Command Reference x25 pvc ● 189 that accommodates it. (Refer to the x25 packet-size and x25 window-size command for ways to set the flow control parameters of an X.25 interface.) You can configure only one X.25 CLNS PVC for a point-to-multipoint X.25 interface. So you must remove the existing one first if you want to configure another X.25 CLNS PVC for the same interface.
3Com Router 5000 Family and Router 6000 Family Command Reference ●1 SPECIAL NEW FEATURES COMMANDS ALPHABETICAL LISTING OF COMMANDS adjust-interval 2 adjust-ratio 3 adjust-route 4 check-term 5 debugging rcrlocal event 6 display rcrlocal interface-load 10 display rcrlocal statistics 11 rcrlocal 12
2 ● adjust-interval 3Com Router 5000 Family and Router 6000 Family Command Reference adjust-interval Purpose Use the adjust-interval command to set the time interval for dynamically adjusting the loads of the interfaces corresponding to the equal cost routes. Use the undo adjust-interval command to restore the default time interval, which is 10 seconds. Syntax adjust-interval seconds undo adjust-interval Parameters seconds Example Set the time interval for dynamic adjustment to 1 minute.
3Com Router 5000 Family and Router 6000 Family Command Reference adjust-ratio ● 3 adjust-ratio Purpose Use the adjust-ratio command to set the ratio used by the RCR feature as a criterion for judging whether the loads of the interfaces and the result of the adjustment are consistent with the expected condition or ratio. Use the undo adjust-ratio command to restore the default ratio, that is, 1. Syntax adjust-ratio value undo adjust-ratio Parameters value Example Set the ratio to 9.
4 ● adjust-route 3Com Router 5000 Family and Router 6000 Family Command Reference adjust-route Purpose Use the adjust-route command to add a destination address to which equal cost routes are present for dynamically adjustment. Use the undo adjust-route command to remove a configured destination address.
3Com Router 5000 Family and Router 6000 Family Command Reference check-term ● 5 check-term Purpose Use the check-term command to set the period for checking Netstream traffic and IP traffic of the interfaces. Use the undo check-term command to restore the default checking period. Syntax check-term seconds undo check-term seconds Parameters seconds Example Set the checking period to 5 seconds. Period for checking Netstream traffic and IP traffic of the interfaces. Valid values are 1 to 9 seconds.
6 ● debugging rcrlocal event 3Com Router 5000 Family and Router 6000 Family Command Reference debugging rcrlocal event Purpose Use the debugging rcrlocal event command to enable RCR debugging. Use the undo debugging rcrlocal event command to disable RCR debugging. Syntax debugging rcrlocal event undo debugging rcrlocal event Parameters None Default By default, the RCR debugging is disabled. Example Enable local RCR mode debugging.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging rcrlocal event ● 7 Entry mask:255.255.0.0, Entry IP:88.1.0.2 Filter data streams found during Netstream data stream collection. *0.46441880 Quidway RCRL/8/RCRL_DEBUG_EVENT: In Collecting Netstream entries. Adjust Node mask:255.255.0.0, Adjust Node IP:88.1.0.0 Entry mask:255.255.0.0, Entry IP:88.1.0.1 Filter data streams found during Netstream data stream collection. *0.
8 ● debugging rcrlocal event 3Com Router 5000 Family and Router 6000 Family Command Reference DstAdd: 88.1.0.3 SrcAdd: 10.1.1.2 OutInt: 1154 Pro: 114 Port: 0 Load: 219816 DstAdd: 88.1.0.4 SrcAdd: 10.1.1.2 OutInt: 1154 Pro: 114 Port: 0 Load: 219816 List all data streams identified to be relevant to this adjustment operation. *0.46444180 Quidway RCRL/8/RCRL_DEBUG_EVENT: After sort. DstAdd: 88.1.0.1 SrcAdd: 10.1.1.2 OutInt: 1026 Pro: 114 Port: 0 Load: 219853 DstAdd: 88.1.0.2 SrcAdd: 10.1.1.
3Com Router 5000 Family and Router 6000 Family Command Reference debugging rcrlocal event ● 9 Idx: 1154 Bnd: 100000 CurLoad: 1318973 ExpLoad: 1236513 StmLd: 1318933 AjstLd: 1099194 Display the supposed load of each interface after preadjustment. *0.46446500 Quidway RCRL/8/RCRL_DEBUG_EVENT: No need to Doadjust. PreTotalMargin(357248)-PostTotalMargin(521978)<=PreTotalMargin*Ratio(3 5724.8007813) Evaluate the result of the preadjustment.
10 ● display rcrlocal interface-load 3Com Router 5000 Family and Router 6000 Family Command Reference display rcrlocal interface-load Purpose Use the command to display the load allocation information on interfaces. Syntax display rcrlocal interface-load Parameters None Example Display the current loads of all the interfaces with equal cost routes.
3Com Router 5000 Family and Router 6000 Family Command Reference display rcrlocal statistics ● 11 display rcrlocal statistics Purpose Use the display rcrlocal statistics command to display information about the traffic loads of the interfaces with equal cost routes to all or a specified destination address. Syntax display rcrlocal statistics [ ip-address { mask-length | net-mask } ] Parameters ip-address IP address of an interface, in dotted decimal notation.
12 ● rcrlocal 3Com Router 5000 Family and Router 6000 Family Command Reference rcrlocal Purpose Use the rcrlocal command to enter rcrlocal view and enable local RCR load balancing mode. Use the undo rcrlocal command to disable local RCR load balancing mode Syntax rcrlocal undo rcrlocal Parameters None Example Enter rcrlocal view and enable local RCR load balancing mode.
