Quick Specs

QuickSpecs
HP ProDesk 600 G4 Business Desktops PCs
Technical Specifications – Miscellaneous Features
Not all configuration components are available in all regions/countries.
c06043924 – DA16289 – Worldwide — Version 25 — May 30, 2019
Page 93
Additional Features
Tower Orientation
Product can be oriented as either a desktop (horizontal) or a tower (vertical) for MT,
SFF, and DM only
Drive Protection System
DPS Access through F10 Setup during Boot
A diagnostic hard drive self- test. It scans critical physical components and every
sector of the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a
Windows-based diagnostics utility or through the computer's setup procedure. It
produces an evaluation on whether the hard drive is the source of the problem and
needs to be replaced
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain
types of failures
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
Allows hard drives to monitor their own health and to raise flags if imminent failures
were predicted
SMART I - Drive Failure Prediction
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
SMART II - Off-Line Data Collection
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
SMART III - Off-Line Read Scanning with
Defect Reallocation
IOEDC: I/O Error Detection Circuitry
SMART IV - End-to-End CRC for hard
drives
Detects errors in Read/Write buffers on HDD cache RAM