Datasheet

QuickSpecs
HP ProLiant xw460c Blade Workstation
Overview
DA – 12680 Worldwide — Version 12 — November 17, 2008 Page Page 3
At A Glance
This document covers the HP ProLiant xw460c Blade Workstation and HP ProLiant xw460c Blade Workstation with HP
Graphics Expansion Blade module only. For more information on HP BladeSystems c-Class Enclosures and HP BladeSystem
c-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The HP ProLiant xw460c Blade Workstation provides greater density of two-processor workstation blades without
compromising power efficiency, performance, features and choices.
HP ProLiant xw460c Blade Workstation includes:
• Processor:
o Up to two Intel® Xeon® 5400 series processors
o Up to two Intel® Xeon® 5200 series processors
o Supports Quad-Core 3.33, 3.16, 3.00, 2.83, 2.66, 2.50, or 2.00 GHz 1333 MHz FSB-2 x 6
MB Level 2
cache memory or Dual-Core with 3.50, 3.33 or 3.00GHz 1333 MHz FSB
5
-6 MB Level 2 cache memory
o Intel® 5000P chipset supporting up to 1333 MHz Front Side Bus
• Memory:
o Up to 64 GB of memory supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz. (32-bit
OS limits physical memory space to 4 GB)
NOTE: 64 GB of memory is supported with 80W processors and below. Not supported with 120W
processors
o Advanced ECC memory support
o Supporting memory interleaving (2x1)
o Low-power memory options available
• Storage Controller:
o Integrated HP Smart Array E200i RAID controller with 64 MB or 128 MB battery-backed write-cache
(BBWC). New pre-configured models come standard with 128 MB BBWC. Supports RAID 0, 1.
• Internal Drive Support:
o Up to 2 small form factor (SFF) SAS hot-plug hard disk drives
• Network Controller:
o Two (2) integrated single port NC373i Multifunction Gigabit Server Adapters
o One (1) additional 10/100 NIC dedicated to iLO 2 Management
• Graphics Adapter:
o Professional 2D & 3D graphics with hardware acceleration via graphics subsystem
o NVIDIA Quadro FX 770M (Single or dual cards configuration capable)
§ For professional 2D graphics & entry 3D graphics application
5
Actual bus speed is less. Listed bus speed represents the equivalent effective throughput for data.