Datasheet

QuickSpecs
HP ProLiant xw460c Blade Workstation
Technical Specifications
DA 12680 Worldwide Version 12 November 17, 2008 Page Page 27
Without HP
Graphics
Expansion Blade
module
With HP Graphics
Expansion Blade
module
Height
2.207 in (5.61 cm) 4.414 in (11.22 cm)
Depth
20.058 in (50.95 cm)
Dimensions
Width
7.154 in (18.17cm)
Weight Maximum
14.20 lb (6.44kg) 19.49 lb (8.84kg)
Operating
50° to 95°F (10° to 35°C)
Non-Operating
-40° to 140°F (-40° to 60°C)
Storage
-4 to 140°F (-20° to 60°C)
Maximum Wet Bulb
Temperature
86°F (-30°C)
Temperature Range*
Operating
10% to 90%
Shipping
10% to 90%
Relative Humidity**
Storage
10% to 95%
HP ProLiant xw460c
Blade Workstation
* All temperature ratings shown are for sea level. An altitude derating of 1.8°F per 1,000 ft (1°C
per 304.8 m) to 10,000 ft (3048 m) is applicable. No direct sunlight allowed. Upper operating
limit is 10,000 ft (3,048 m) or 70 Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144
m) or 30.3 KPa/4.4 psia.
**Storage maximum humidity of 95% is based on a maximum temperature of 113°F (45°C).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
Disk Drive and
Enclosure Interface
3G SAS (Serial Attached SCSI)
SAS Connectors
2 internal (SFF8484) x4 wide port connectors
Cache Memory
Speed
DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
Server Interface
x4 2.5G PCIe provides 2 GB/s maximum bandwidth.
SAS Speed
x8 3G SAS provides 2.4 GB/s maximum bandwidth.
Cache Memory
40-bit 64 MB or 128 MB cache: ECC protection, battery-backed, and
transportable
Logical Drives
Supported
Up to 32 logical volumes
Maximum Logical
Drive Capacity
144 GB (2 x 72 GB)
Host Memory
Addressing
64-bit, supporting greater than 4 GB server memory space
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
HP Smart Array
E200i Controller
Upgradeable
Firmware
Upgradeable Firmware