Datasheet
QuickSpecs
HP ProLiant xw460c Blade Workstation
Configuration Information - Factory Integrated Models (North America region only)
DA – 12680 Worldwide — Version 12 — November 17, 2008 Page Page 16
NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE: HP does not allow factory integration of options into standard models listed previously as "Pre-configured Models".
Configure-To-Order workstation blade must start with a CTO Blade.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option, only available at time of CTO Blade purchase.
Step 1: Base Workstation Blade Configuration (Select a configurable Blade)
Choose from one of the following base configurable models.
HP ProLiant xw460c Blade Workstation configurable (CTO) model* 442824-B21
HP ProLiant xw460c Blade Workstation with expansion configurable (CTO)
model**
490881-B21
NOTE *: Single-width, half-height bade with two mezzanine card slots
available.
NOTE **: Double-width half-height blade with two, full-length, PCIe x8 slots.
Both mezzanine card slots on base blade not available.
Configurable Model ships with:
(2) Integrated single port NC373i Multifunction Gigabit NICs (1) additional
10/100 NIC dedicated to iLO 2 Management
Integrated HP Smart Array E200i RAID controller supporting RAID 0/1
NOTE: Controller cache module selection is required. Select either the
standard 64 MB module or the optional 128 MB module in step 2 below.
Two small form factor (SFF) SAS hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
Configurable Model
HP Remote Graphics Software with additional feature sets for Blade
Workstation
Step 2: Choose Required Options
(one of the following from each list unless otherwise noted):
For single processor configuration choose:
Quad-core Process Option Kits (FIO only)
Intel® Xeon® processor X5470 (3.33 GHz, 1333 MHz FSB, 120W) Option
Kit, FIO Base
NOTE: If 2 processors are desired, select one 504586-L21 and one 504586-
B21
504586-L21
Intel® Xeon® processor X5460 (3.16 GHz, 1333 MHz FSB, 120W) Option
Kit, FIO Base
NOTE: If 2 processors are desired, select one 463613-L21 and one 463613-
B21
463613-L21
Intel® Xeon® processor X5450 (3.00 GHz, 1333 MHz FSB, 120W) Option
Kit, FIO Base
NOTE: If 2 processors are desired, select one463614-L21 and one 463614-
B21
463614-L21
Processors
Intel® Xeon®
processor E5450 (3.00 GHz, 1333
MHz
FSB, 80W) Option Kit,
462683-L21