Datasheet

Mirrored memory configuration
Mirrored memory configurationMirrored memory configuration
Mirrored memory configuration
Mirrored memory FBDIMM configuration requirements (in addition to general configuration requirements):
Banks A and B must be fully populated.
Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain
FBDIMMs with identical part numbers.
When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:
Configuration
ConfigurationConfiguration
Configuration
Bank A
Bank ABank A
Bank A
1A and 3A
1A and 3A1A and 3A
1A and 3A
Bank B
Bank BBank B
Bank B
5B and 7B
5B and 7B5B and 7B
5B and 7B
Bank C
Bank CBank C
Bank C
2C and 4C
2C and 4C2C and 4C
2C and 4C
Bank D
Bank DBank D
Bank D
6D and 8D
6D and 8D6D and 8D
6D and 8D
1 X X - -
2 X X X X
NOTE:
NOTE:NOTE:
NOTE: After installing FBDIMMs, use RBSU to configure the system for mirrored memory support ("Configuring mirrored memory"
on page 57).
QuickSpecs
HP ProLiant DL380 G5 Storage Server
HP ProLiant DL380 G5 Storage ServerHP ProLiant DL380 G5 Storage Server
HP ProLiant DL380 G5 Storage Server
Memory
DA - 12559 EMEA — Version 20 — November 17, 2008 Page 43