Datasheet
Following are memory options available from HP:
2 GB FBD PC2-5300 2 x 1 GB Low Power Single Rank Kit
461826-B21
4 GB FBD PC2-5300 2 x 2 GB Low Power Dual Rank Kit
461828-B21
8 GB FBD PC2-5300 2 x 4 GB Low Power Dual Rank Kit
466440-B21
1 GB FBD PC2-5300 2 x 512 MB Single Rank Kit
397409-B21
2 GB FBD PC2-5300 2 x 1 GB Dual Rank Kit
397411-B21
4 GB FBD PC2-5300 2 x 2 GB Dual Rank Kit
397413-B21
8 GB FBD PC2-5300 2 x 4 GB Dual Rank Kit
397415-B21
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit
413015-B21
64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit
495604-B21
In Advanced ECC mode, FBDIMMs must be populated as specified in the following table:
Configuration
ConfigurationConfiguration
Configuration
Bank A
Bank ABank A
Bank A
1A and 3A
1A and 3A1A and 3A
1A and 3A
Bank B
Bank BBank B
Bank B
5B and 7B
5B and 7B5B and 7B
5B and 7B
Bank C
Bank CBank C
Bank C
2C and 4C
2C and 4C2C and 4C
2C and 4C
Bank D
Bank DBank D
Bank D
6D and 8D
6D and 8D6D and 8D
6D and 8D
1
X
- - -
2
X X
- -
3
X X X
-
4
X X X X
Online spare memory configuration
Online spare memory configurationOnline spare memory configuration
Online spare memory configuration
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
If banks A and C are being used, they must be fully populated.
If installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If installed, bank B and bank D must also contain FBDIMMs with identical part numbers
In online spare mode, FBDIMMs must be populated as specified in the following table:
Configuration
ConfigurationConfiguration
Configuration
Branch 0
Branch 0Branch 0
Branch 0
Bank A
Bank ABank A
Bank A
1A and 3A
1A and 3A1A and 3A
1A and 3A
Branch 0
Branch 0Branch 0
Branch 0
Bank C
Bank CBank C
Bank C
2C and 4C
2C and 4C2C and 4C
2C and 4C
Branch 1
Branch 1Branch 1
Branch 1
Bank B
Bank BBank B
Bank B
5B and 7B
5B and 7B5B and 7B
5B and 7B
Branch 1
Branch 1Branch 1
Branch 1
Bank D
Bank DBank D
Bank D
6D and 8D
6D and 8D6D and 8D
6D and 8D
1
*
X
- - -
2
X X
- -
3
X X X X
*Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs. All FBDIMMs 1GB and above are dual-
rank.
After installing FBDIMMs, use RBSU to configure the system for online spare memory support.
QuickSpecs
HP ProLiant DL380 G5 Storage Server
HP ProLiant DL380 G5 Storage ServerHP ProLiant DL380 G5 Storage Server
HP ProLiant DL380 G5 Storage Server
Memory
DA - 12559 EMEA — Version 20 — November 17, 2008
Page 42