Datasheet

System Fans 3 dual rotor fans ship standard with X3370, X3360, X3350, X3330, X3320, and E3120, E3110
models.
4 dual rotor fans ship standard with all other models (e.g. X3220, X3210, 3075, 3065, E4600,
E4400, E2160, 440 and 420 models).
Ultra Thin Rack
Deployment Overview
For the Ultra Thin Rack Deployment Overview, including best practices for the HP ProLiant DL320 G5p,
please see the following URL: www.hp.com/servers/proliantdl320-g5p .
Required Cabling For required cabling information, refer to the Web site at: www.hp.com/servers/proliantdl320-g5p .
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
NOTE: Support differences will exist between the SATA and SAS configurations.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download site www.hp.com/support/DL320G5p .
Rack Airflow Requirements Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors : If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side : The clearance between the installed rack component and the side panels of the rack must be
a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL: www.hp.com/servers/proliantdl320-g5p .
Rack Kit The DL320 G5p Fixed Rail System supports installation in racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to:
www.racksolutions.com for more information.
QuickSpecs
HP ProLiant DL320 Generation 5p
Standard Features
DA - 12854 Worldwide QuickSpecs — Version 22 — 4.27.2009 Page 13