QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Overview HP ProLiant BL680c Generation 5 (G5) Server Blade Front view image 1. Cache battery modules 5. 2. 3. 4. Two small form factor (SFF) hot-plug drive bays Power button Local I/O connector 6. 7. 8.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Overview Processor: Two or four Intel Xeon 7400 series processors with up to 6 cores NOTE: The BL680c G5 supports either two or four processors. One and three processors are not supported. NOTE: All processors within the server must be identical.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Overview HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration. HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple management console.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features Processor One of the following depending on Model Six-Core Processors Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) Processor Intel® Xeon® E7450 (2.40GHz/6-core/12MB/90W) Processor Intel® Xeon® L7455 (2.13GHz/6-core/12MB/65W) Processor NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details. Four-Core Processors Intel® Xeon® E7440 (2.40GHz/4-core/16MB/90W) Processor Intel® Xeon® E7430 (2.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features Network Controllers Four (4) embedded Gigabit Ethernet network adapter ports, plus (1) additional management network adapter port: Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP offload engine for Microsoft Windows, iSCSI boot, and optional accelerated iSCSI One (1) NC326i Dual Port Gigabit Server Adapter One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management NOTE: The Gigab
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features Storage Controller The BL680c G5 includes an integrated Smart Array P400i Controller. The P400i is an x8 PCI Express serial attached SCSI (SAS) v1.0 embedded RAID controller and provides server performance and reliability through its support of advanced SCSI technology and RAID capabilities. The P400i includes 256MB of 40bit ECC protected cache and supports RAID levels 0 (striping) and 1 (mirroring).
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features can range from a single virtual machine to complex multi-tier environments and their associated physical and virtual resource requirements.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features Operating Systems and Virtualization Software Support for ProLiant Servers Microsoft Windows Server Microsoft Windows Server Hyper V Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Oracle Enterprise Linux (OEL) Sun Solaris 10 for x86/x64 based Systems VMware ESX Server HP Citrix Essentials for XenServer NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Sof
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Standard Features Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Service and Support Standard Care Package Package that maintains high level of server availability HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM. http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Service and Support http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf 1-Year HP Proactive Select 10 Credit Provides a flexible way to purchase HP best-in-class consultancy and technical services. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Models 4 or 6-Core 7400 Series Models NOTE: Not all models are available in all regions. Check with your local country HP offices for availability. NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. HP ProLiant BL680c G5 Processor(s) (2) Intel® Xeon® E7458 (2.40GHz/6-core/16MB/90W) Processor (2) Intel® Xeon® E7450 (2.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: Not all models are available in all regions.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Configuration Information - Factory Integrated Models HP Storage Controllers HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit NOTE: For more information low power memory option kits and other ProLiant energy efficient features, see: http://h18004.www1.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Core Options NOTE: For additional "Core Options" and "Additional Options" please see the options sections below. NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Core Options HP Memory HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit HP Hard Drives NOTE: The components of a storage subsystem (e.g.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Additional Options x 7 HP Software Technical Support Service. NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Additional Options will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. HP High Performance Computing Linux Value Pack Media Kit NOTE: This part number can be used to purchase media including software and documentation, which will be delivered to the customer.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Additional Options HP SB40c Storage Blade HP SB40c Storage Blade NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem c-Class (P/N 431643-B21) is required to support the HP SB40c Storage Blade. The PCI Express Mezzanine Pass-Thru Card must be installed in mezzanine slot 3 of the BL680c G5. Please see the QuickSpecs for technical specifications and additional information: http://h18000.www1.hp.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". NOTE: For a specific memory level, the best performance is achieved using a homogenous memory configuration. DIMM installation guidelines: 1. 2. 3. 4. 5. All memory must be PC2-5300 fully buffered DDR2 DIMMs operating at 667 MHz. Both DIMM slots in a memory bank must be populated. Banks must be populated in sequential alphabetic order, starting with bank A.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Memory HP ProLiant BL680c G5 memory options: HP Memory Following are memory options available from HP: HP 4GB Fully Buffered DIMM PC2-5300 2x2GB Low Power DDR2 Memory Kit HP 8GB Fully Buffered DIMM PC2-5300 2x4GB DDR2 Memory Kit HP 8GB Fully Buffered DIMM PC2-5300 2x4GB Low Power DDR2 Memory Kit HP 16GB Fully Buffered DIMM PC2-5300 2x8GB DDR2 Memory Kit HP 64GB Fully Buffered DIMM PC2-5300 8x8GB DDR2 Memory Kit 461828-B21 397415-B21 466440-B21
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Storage 1-2 2 x SFF SAS or SATA hot-plug hard drives Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Technical Specifications System Unit Dimensions (H x W x D) Weight (approximate) Power Specifications System Inlet Temperature Relative Humidity (non-condensing) Altitude Acoustic Noise Full height server blade: 14.42 x 2.03 x 20.06 in (36.17 x 5.16 x 50.95 cm) Maximum 21 lb (9.5 kg) (all hard drives and processors installed) Minimum 19 lb (8.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Technical Specifications HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/ 12810_div.html Smart Array P400i Controller Disk Drive and Enclosure 3G SAS (Serial Attached SCSI) Interface 1.5G SATA (Serial Advanced Technology Attachment) SAS Connectors 2 internal (SFF8484) x4 wide port connectors Cache Memory Speed Server Interface DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Technical Specifications Embedded NC373i Multifunction Gigabit Server Adapters Network Processor Broadcom 5708S Data Transfer Method Four lane (x4) PCI Express Network Transfer Rate 2000 Mb/s per port full duplex only (theoretical maximum value) IEEE Compliance 802.1p, 802.1Q, 802.3, 802.3ad, and 802.
QuickSpecs HP ProLiant BL680c Generation 5 (G5) Server Blade Technical Specifications Security Directory Support Services Driver Support Management protocols supported Environment-friendly Products and Approach Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting interface RC4 encryption of video Active Directory v1.
