Datasheet

ManualsBrandsHP ManualsComputers440940-B21

NOTE:

NOTE: NOTE:

NOTE:

For Configure to Order requirements within EMEA region, please consult local Sales Contact.

NOTE:

NOTE: NOTE:

NOTE:

HP does not allow factory integration of options into standard models listed previously as "Pre-configured Models".

Configure-To-Order workstation blade must start with a CTO Blade.

NOTE:

NOTE: NOTE:

NOTE:

This product offering does not support HP Factory Express Server Configuration Level 1.

NOTE:

NOTE: NOTE:

NOTE:

FIO indicates that this option is a Factory Installable Option, only available at time of CTO Blade purchase.

Step 1: Base Workstation Blade Configuration (Select a configurable Blade)

Step 1: Base Workstation Blade Configuration (Select a configurable Blade)Step 1: Base Workstation Blade Configuration (Select a configurable Blade)

Step 1: Base Workstation Blade Configuration (Select a configurable Blade)

Configurable Model

Configurable ModelConfigurable Model

Configurable Model

Choose from one of the following base configurable models.

HP ProLiant xw460c Blade Workstation configurable (CTO) model

442824-B21

HP ProLiant xw460c Blade Workstation with expansion configurable (CTO) model

490881-B21

* Single-width, half-height bade with two mezzanine card slots available.

** Double-width half-height blade with two, full-length, PCIe x8 slots. Both mezzanine

card slots on base blade not available.

Configurable Model ships with:

Configurable Model ships with:Configurable Model ships with:

Configurable Model ships with:

(2) Integrated single port NC373i Multifunction Gigabit NICs (1) additional 10/100

NIC dedicated to iLO 2 Management

Integrated HP Smart Array E200i RAID controller supporting RAID 0/1

NOTE:

NOTE: NOTE:

NOTE:

Controller cache module selection is required. Select either the standard 64

MB module or the optional 128 MB module in step 2 below.

Two small form factor (SFF) SAS hard drive bays

Integrated Lights-Out 2 Standard Blade Edition

HP Remote Graphics Software with additional feature sets for Blade Workstation

Step 2: Choose Required Options

Step 2: Choose Required OptionsStep 2: Choose Required Options

Step 2: Choose Required Options

(one of the following from each list unless otherwise noted):

(one of the following from each list unless otherwise noted):(one of the following from each list unless otherwise noted):

(one of the following from each list unless otherwise noted):

Processors

ProcessorsProcessors

Processors

For single processor configuration choose:

Quad-Core Process Option Kits

Quad-Core Process Option KitsQuad-Core Process Option Kits

Quad-Core Process Option Kits

(FIO only)

Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 1333 MHz FSB, 120W)

Option Kit, FIO Base

NOTE:

NOTE: NOTE:

NOTE:

If 2 processors are desired, select one 492308-L21 and one 492308-B21

492308-L21

Quad-Core Intel Xeon processor X5460 (3.16 GHz, 1333 MHz FSB, 120W) Option

Kit, FIO Base

NOTE:

NOTE: NOTE:

NOTE:

If 2 processors are desired, select one 463613-L21 and one 463613-B21

463613-L21

Quad-Core Intel Xeon processor X5450 (3.00 GHz, 1333 MHz FSB, 120W) Option

Kit, FIO Base

NOTE:

NOTE: NOTE:

NOTE:

If 2 processors are desired, select one 463614-L21 and one 463614-B21

463614-L21

Quad-Core Intel Xeon processor E5450 (3.00 GHz, 1333 MHz FSB, 80W) Option

Kit, FIO Base

NOTE:

NOTE: NOTE:

NOTE:

If 2 processors are desired, select one 462683-L21 and one 462683-B21

462683-L21

Quad-Core Intel Xeon processor E5440 (2.83 GHz, 1333 MHz FSB, 80W) Option

Kit, FIO Base

NOTE:

NOTE: NOTE:

NOTE:

If 2 processors are desired, select one 462685-L21 and one 462685-B21

462685-L21

QuickSpecs

HP ProLiant xw460c Blade Workstation

HP ProLiant xw460c Blade WorkstationHP ProLiant xw460c Blade Workstation

HP ProLiant xw460c Blade Workstation

Configuration Information - Factory Integrated Models (North America region only)

DA - 12680 Worldwide — Version 14 — April 22, 2009

Page 14