User's Manual

Table 20 Error messages (continued)
How to correctMeaningStatus code value
Derived unit create: Case 2: The supplied virtual disk
handle is already an attribute of another derived unit.
This may indicate a programming error
Case 4: Resolve the delay before performing
the operation.
Case 5: Delete any remaining virtual disks or
wait for the used capacity to reach zero before
Derived unit discard: Case 3: One or more LUNs are
presented to EVA hosts that are based on this virtual
disk.
the disk group can be deleted. If this is the last
remaining disk group, uninitialize the storage
cell to remove it.
Case 4: Logical disk clear data lost: The virtual disk
is in the non-mirrored delay window.
Case 6: Report the error to product support.
Case 5: LDAD discard: The operation cannot be
performed because one or more virtual disks still exist,
Case 7: The disk must be in a reserved state
before it can be erased.
the disk group still may be recovering its capacity, or
this is the last disk group that exists.
Case 8: Delete the virtual disks or LUN
presentations before uninitializing the storage
cell.
Case 6: LDAD resolve condition: The disk group
contains a disk volume that is in a data-lost state. This
condition cannot be resolved.
Case 9: Delete the LUN presentations before
deleting the EVA host.
Case 7: Physical Store erase volume: The disk is a
part of a disk group and cannot be erased.
Case 10: Report the error to product support.
Case 11: Resolve the situation before
attempting the operation again.
Case 8: Storage cell discard: The storage cell contains
one or more virtual disks or LUN presentations.
Case 12: Resolve the situation before
attempting the operation again.
Case 9: Storage cell client discard: = The EVA host
contains one or more LUN presentations.
Case 13: This may indicate a programming
error. Report the error to product support.
Case 10: SCVD discard: The virtual disk contains one
or more derived units and cannot be discarded. This
may indicate a programming error.
Case 14: Select another disk or remove the
disk from the disk group before making it a
member of a different disk group.
Case 11: SCVD set capacity: The capacity cannot
be modified because the virtual disk has a
dependency on either a snapshot or snapclone.
Case 15: Remove the virtual disks from the
group and retry the operation.
Case 12: SCVD set disk cache policy: The virtual disk
cache policy cannot be modified while the virtual disk
is presented and enabled.
Case 13: SCVD set logical disk: The logical disk
attribute is already set, or the supplied logical disk is
already a member of another virtual disk.
Case 14: VOLUME set requested usage: The disk
volume is already a member of a disk group or is in
the state of being removed from a disk group.
Case 15: GROUP discard: The Continuous Access
group cannot be discarded as one or more virtual
disk members exist.
Report the error to product support.The operation cannot be performed because the
object does not exist. This can indicate a user or
program error.
VOLUME set requested usage: The disk volume set
requested usage cannot be performed because the
26
Parameter Object Does
Not Exist
disk group does not exist. This can indicate a user or
program error.
Case 1: Report the error to product support.
Case 2: Retry the request at a later time.
Case 1: The operation cannot be performed because
the object does not exist. This can indicate a user or
program error.
Case 2: DERIVED UNIT discard: The operation cannot
be performed because the virtual disk, snapshot, or
snapclone does not exist or is still being created.
27
Target Object Does Not
Exist
Case 3: Report the error to product support.
Case 4: Report the error to product support.
Case 3: VOLUME set requested usage: The operation
cannot be performed because the target disk volume
does not exist. This can indicate a user or program
error.
99