User's Manual

6 Error messages
This list of error messages is in order by status code value, 0 to 100.
Table 20 Error messages
How to correctMeaningStatus code value
No corrective action required.The SCMI command completed successfully.0
Successful Status
Delete the associated object and try the
operation again. Several situations can cause
this message:
Presenting a LUN to a host:
• Delete the current association or specify a
different LUN number.
Storage cell initialize:
• Remove or erase disk volumes before the
storage cell can be successfully created.
Adding a port WWN to a host:
• Specify a different port WWN.
Adding a disk to a disk group:
• Delete the specified disk volume before
creating a new disk volume.
The object or relationship already exists.1
Object Already Exists
Report the error to product support.The command or response buffer is not large enough
to hold the specified number of items. This can be
caused by a user or program error.
2
Supplied Buffer Too Small
Report the error to product support.The handle is already assigned to an existing object.
This can be caused by a user or program error.
3
Object Already Assigned
Reclaim some logical space or add physical
hardware.
There is insufficient storage available to perform the
request.
4
Insufficient Available Data
Storage
Report the error to product support.An unexpected condition was encountered while
processing a request.
5
Internal Error
Report the error to product support.This error is no longer supported.6
Invalid status for logical
disk
Report the error to product support.The supplied class code is of an unknown type. This
can be caused by a user or program error.
7
Invalid Class
Report the error to product support.The function code specified with the class code is of
an unknown type.
8
Invalid Function
Report the error to product support.The specified command supplied unrecognized
values. This can indicate a user or program error.
9
Invalid Logical Disk Block
State
Verify the hardware configuration and retry the
request.
The specified request supplied an invalid loop
configuration.
10
Invalid Loop
Configuration
Report the error to product support.There are insufficient resources to fulfill the request,
the requested value is not supported, or the
11
Invalid parameter
parameters supplied are invalid. This can indicate a
user or program error.
97