User's Manual

Figure 11 HSV300 controller enclosure (back view)
9. Enclosure power push button1. Power supply 1
10. Power supply 22. HSV300 controller 1
11. Host ports, FP1, FP2, connection to front end (host or SAN)3. Management module status LEDs
12. DP1-A port, back-end connection to A loop4. Ethernet port
13. DP1-B port, back-end connection to B loop5. Management module
14. Manufacturing diagnostic port6. HSV300 controller 2
15. HSV300 controller status and fault LEDs7. Rear UID push button
8. Enclosure status LEDs
Figure 12 HSV300-S controller enclosure (back view)
10. Power supply 21. Power supply 1
11. Switch ports, 1, 2, ... up to 10 for connection to front end (switch
or SAN)
2. HSV300-S controller 1
12. DPI-A port, back-end connection to A loop3. Management module status LEDs
13. DPI-B port, back-end connection to B loop4. Ethernet port
14. Console port (switch management), upper connection5. Management module
15. Ethernet port (switch management)6. HSV300-S controller 2
16. Manufacturing diagnostic port7. Rear UID push button
17. HSV300-S controller status and fault LEDs8. Enclosure status LEDs
9. Enclosure power push button
Management module
The HP P6000 Control Panel provides a direct interface to the management module within each
controller. From the HP P6000 Control Panel you can display storage system status and configuration
information, shut down the storage system, and manage the password. For tasks to perform with
the HP P6000 Control Panel, see the HP P6000 Control Panel online help.
The HP P6000 Control Panel provides two levels of administrator access and an interface for
firmware updates to the management module. For additional details about the HP P6000 Control
Panel, see the HP P6000 Control Panel online help.
Controller enclosures 15